All Stories

  1. Generalised oedema monitoring utilising a NIR hyperspectral camera in critically ill neonates: A feasibility study
  2. A Low-Cost Paper-Based Electrochemical Aptasensor for HER-2 Detection Using Ti 3 C 2 T x ...
  3. Efficient and Personalized Federated Learning for Human Activity Recognition on Resource-Constrained Devices
  4. Simultaneous detection of thyroid-stimulating hormone and C-reactive protein using a multiplex lateral flow device for improved hypothyroidism diagnosis
  5. Enhancing Lateral Flow Device Design for Multiplexed Plasmonic Biosensing of Inflammatory Biomarkers
  6. Towards Efficient Hybrid Quantum-Classical Learning Models
  7. Performance of Colorimetric Lateral Flow Immunoassays for Renal Function Evaluation with Human Serum Cystatin C
  8. Aptamer-enhanced ultrasensitive electrochemical detection of HER-2 in breast cancer diagnosis using ZnO tetrapod-K4PTC nanohybrids
  9. Reduced Heating Wireless Energy Transmission System for Powering Implanted Circulatory Assist Devices: Benchtop and In-Vivo Studies
  10. Highly selective aptasensor for optical detection of whole cell gastrointestinal pathogen Shigella dysenteriae at label-free liquid crystal–aqueous interface
  11. High-Performance Paper-Based DNA-Conjugated Ti3C2Tx Bio-Nanoelectrode for Rapid Point-of-Care Detection of HPV-16
  12. Ultrasensitive electroanalytical sensing platform using aptamer-conjugated V2CTx MXene for the detection of the HER-2 biomarker
  13. Overview of emerging sensors for environmental monitoring
  14. Two dimensional-material-coated microcantilevers for enhanced mass sensing and material characterization
  15. Emerging Sensors for Environmental Monitoring
  16. Enhancing Sensitivity of Point-of-Care Thyroid Diagnosis via Computational Analysis of Lateral Flow Assay Images Using Novel Textural Features and Hybrid-AI Models
  17. Machine Learning-Based Structural Health Monitoring Technique for Crack Detection and Localisation Using Bluetooth Strain Gauge Sensor Network
  18. Machine Learning-Based Structural Health Monitoring Technique for Crack Detection and Localisation Using Bluetooth Strain Gauge Sensor Network
  19. Optimizing Machine Learning for ResourceConstrained Devices: A Comparative Analysis of Preprocessing Techniques and Machine Learning Algorithms
  20. Detecting Respiratory Viruses Using a Portable NIR Spectrometer—A Preliminary Exploration with a Data Driven Approach
  21. Fabrication of Gold Nanoparticles Embedded Laser-Induced Graphene (LIG) Electrode for Hydrogen Evolution Reaction
  22. Cystatin C for chronic kidney disease monitoring via the application of gold core-shells in lateral flow immunoassays
  23. Influence of the Training Set Composition on the Estimation Performance of Linear ECG-Lead Transformations
  24. Data Mining and Fusion Framework for In-Home Monitoring Applications
  25. Development of hybrid 3D-printed structure with aligned drug-loaded fibres using in-situ custom designed templates
  26. Data Mining and Fusion Framework for In-Home Monitoring Applications
  27. Investigating Temporal Features of Carotid Intima-Media Thickness from Ultrasound Imaging with Recurrent Neural Networks
  28. Assessment of hemodynamic indices of conjunctival microvascular function in patients with coronary microvascular dysfunction
  29. Assessment of Indices of Conjunctival Microvascular Function in Patients With and Without Obstructive Coronary Artery Disease
  30. MoS 2 ‐Polyaniline Based Flexible Electrochemical Biosensor: Toward pH Monitoring in Human Sweat
  31. (386) A Novel Wireless Power Transmission System for Left Ventricular Assist Devices
  32. Rebalancing Techniques for Asynchronously Distributed EEG Data to Improve Automatic Seizure Type Classification
  33. A novel patches-selection method for the classification of point-of-care biosensing lateral flow assays with cardiac biomarkers
  34. Effect of Selenium Nanoparticle Size on IL-6 Detection Sensitivity in a Lateral Flow Device
  35. Evaluation of pulse transit time for different sensing methodologies of arterial waveforms
  36. AI-enabled ECG combined with dry electrode sensors for population-based screening of Atrial Fibrillation.
  37. Harnessing Dermal Blood Flow to Mitigate Skin Heating Effects in Wireless Transdermal Energy Systems for Driving Heart Pumps
  38. Seizure Classification Using BERT NLP and a Comparison of Source Isolation Techniques with Two Different Time-Frequency Analysis
  39. Evaluation of the performance of a lateral flow device for quantitative detection of anti-SARS-CoV-2 IgG
  40. A Refined Hot Melt Printing Technique with Real-Time CT Imaging Capability
  41. Development of a mathematical model to predict the health impact and duration of SARS-CoV-2 outbreaks on board cargo vessels
  42. Transcutaneous Pulsed RF Energy Transfer Mitigates Tissue Heating in High Power Demand Implanted Device Applications: In Vivo and In Silico Models Results
  43. INOCA affects more than the coronaries
  44. Development of colorimetric lateral flow assays with gold nanostructures for Cystatin C detection
  45. Device agnostic AI-based analysis of ambulatory ECG recordings
  46. Effect of Functional Electrical Stimulation on Capillary Blood Flow to Muscle
  47. Cystatin C as a biomarker for cardiorenal syndrome diseases quantitative diagnostics and monitoring via point-of-care
  48. Disposable Paper-Based Biosensors: Optimizing the Electrochemical Properties of Laser-Induced Graphene
  49. Epileptic Seizure Classification Using Combined Labels and a Genetic Algorithm
  50. A novel algorithm for cardiovascular screening using conjunctival microcirculatory parameters and blood biomarkers
  51. IgG antibody production and persistence to 6 months following SARS-CoV-2 vaccination: A Northern Ireland observational study
  52. Cross reactivity of spike glycoprotein induced antibody against Delta and Omicron variants before and after third SARS-CoV-2 vaccine dose in healthy and immunocompromised individuals
  53. High-Sensitive Detection and Quantitative Analysis of Thyroid-Stimulating Hormone Using Gold-Nanoshell-Based Lateral Flow Immunoassay Device
  54. WaSP-ECG: A Wave Segmentation Pretraining Toolkit for Electrocardiogram Analysis
  55. User experience of home-based AbC-19 SARS-CoV-2 antibody rapid lateral flow immunoassay test
  56. Point-of-Care Monitoring of Respiratory Diseases using Lateral Flow Assay and CMOS Camera Reader
  57. Classification of Respiratory Syncytial Virus and Sendai Virus Using Portable Near-infrared Spectroscopy and Chemometrics
  58. Printed pH Sensors for Textile‐Based Wearables: A Conceptual and Experimental Study on Materials, Deposition Technology, and Sensing Principles
  59. Fusion of Unobtrusive Sensing Solutions for Sprained Ankle Rehabilitation Exercises Monitoring in Home Environments
  60. Code-free cloud computing service to facilitate rapid biomedical digital signal processing and algorithm development
  61. Overview of featurization techniques used in traditional versus emerging deep learning-based algorithms for automated interpretation of the 12-lead ECG
  62. COVID-19 modelling by time-varying transmission rate associated with mobility trend of driving via Apple Maps
  63. Fusion of Unobtrusive Sensing Solutions for Home-Based Activity Recognition and Classification Using Data Mining Models and Methods
  64. Estimating the Minimal Size of Training Datasets Required for the Development of Linear ECG-Lead Transformations
  65. Polarity dependent electrowetting for directional transport of water through patterned superhydrophobic laser induced graphene fibers
  66. The effect of interpolating low amplitude leads on the inverse reconstruction of cardiac electrical activity
  67. Fusion of Unobtrusive Sensing Solutions for Sprained Ankle Rehabilitation Exercises Monitoring in Home Environments
  68. The use of carotid ultrasound to predict the severity of coronary artery disease
  69. Potentiometric ion-selective sensors based on UV-ozone irradiated laser-induced graphene electrode
  70. User experience analysis of AbC-19 Rapid Test via lateral flow immunoassays for self-administrated SARS-CoV-2 antibody testing
  71. Assessment of the conjunctival microcirculation in adult patients with cyanotic congenital heart disease compared to healthy controls
  72. Evaluation of the IgG antibody response to SARS CoV-2 infection and performance of a lateral flow immunoassay: cross-sectional and longitudinal analysis over 11 months
  73. High-isolation antenna array using SIW and realized with a graphene layer for sub-terahertz wireless applications
  74. Assessment of the conjunctival microcirculation for patients presenting with acute myocardial infarction compared to healthy controls
  75. Sensitivity analysis of the infection transmissibility in the UK during the COVID-19 pandemic
  76. The effect of confounding data features on a deep learning algorithm to predict complete coronary occlusion in a retrospective observational setting
  77. A Novel Method for Quantitative Analysis of C-Reactive Protein Lateral Flow Immunoassays Images via CMOS Sensor and Recurrent Neural Networks
  78. Data acquisition and imaging using wavelet transform: a new path for high speed transient force microscopy
  79. A Review of Covid-19 Symptom Checker Mobile Applications
  80. Regression or Pseudo-Inverse – Which Method Should be Preferred When Developing Inverse Linear ECG-Lead Transformations?
  81. Metal‐oxide nanomaterials recycled from E‐waste and metal industries: A concise review of applications in energy storage, catalysis, and sensing
  82. A lateral flow immunoassay with self-sufficient microfluidic system for enhanced detection of thyroid-stimulating hormone
  83. Independent and grouped 3D cell rotation in a microfluidic device for bioimaging applications
  84. Laboratory evaluation of SARS-CoV-2 antibodies: detectable IgG up to 20 weeks post infection
  85. 34 Use of ultrasound derived carotid intima-media thickness and plaque volume to predict single or multivessel coronary artery disease
  86. Replacing the metal electrodes in triboelectric nanogenerators: High-performance laser-induced graphene electrodes
  87. Nanophotonic-Carbohydrate Lab-on-a-Microneedle for Rapid Detection of Human Cystatin C in Finger-Prick Blood
  88. Data Mining and Fusion of Unobtrusive Sensing Solutions for Indoor Activity Recognition
  89. Laser Induced Porous 3D-Graphene/MnO2 Electrodes Embedded in a Paper-Based Microfluidic Device for Point-of-Care Testing of Neurotransmitters in Finger-Prick Blood
  90. Red Mud-Reduced Graphene Oxide Nanocomposites for the Electrochemical Sensing of Arsenic
  91. Recycled Red Mud–Decorated Porous 3D Graphene for High‐Energy Flexible Micro‐Supercapacitor
  92. Rapid and Cost Effective Removal of Lead(II) Ions from Water using Iron Oxide-Tea Waste Nanocomposite
  93. Polyacrylate grafted graphene oxide nanocomposites for biomedical applications
  94. Recovery of Incapacitated Commercial Delivery Drones using LPWAN Technology
  95. A Point-of-Care Measurement of NT-proBNP for Heart Failure Patients
  96. A Data-Driven Simulator for the Strategic Positioning of Aerial Ambulance Drones Reaching Out-of-Hospital Cardiac Arrests: A Genetic Algorithmic Approach
  97. Expanding the portfolio of tribo-positive materials: Aniline formaldehyde condensates for high charge density triboelectric nanogenerators
  98. Detection and Categorisation of Multilevel High-sensitivity Cardiovascular Biomarkers from Lateral Flow Immunoassay Images via Recurrent Neural Networks
  99. Smart Assisted Living
  100. Early Prediction of Sepsis Considering Early Warning Scoring Systems
  101. Wearable Technology: Signal Recovery of Electrocardiogram from Short Spaced Leads in the Far-field Using Discrete Wavelet Transform Based Techniques
  102. Deep learning to automatically interpret images of the electrocardiogram: Do we need the raw samples?
  103. Novel hybrid method for interpolating missing information in body surface potential maps
  104. Quantitative assessment of the conjunctival microcirculation using a smartphone and slit-lamp biomicroscope
  105. K-Nearest Neighbor based QRS delineator for single lead ECGs recorded in lifestyle monitoring applications
  106. Which part of the P-QRS-T is best when developing linear ECG-lead transformations for the performance assessment of patch based electrocardiographic devices?
  107. Laser-Patternable Graphene Field Emitters for Plasma Displays
  108. Using Wi-Fi technology to transmit telemetry data for UAV flight guidance system development
  109. Versatile microfluidic platform embedded with sidewall three-dimensional electrodes for cell manipulation
  110. Amalgamation of Metamaterial and SIW Technologies for Realizing Wide-Bandwidth and High-Radiation Properties of On-Chip Antennas for Application in Packaging of Terahertz Components
  111. Terahertz On-Chip Antenna Based on Metasurface and SIW with Stacked Layers of Resonators on GaAs Substrate
  112. High density nanowire electrodes for intracortical microstimulation
  113. Sensitivity Enhancement of Point-of-Care for Cardiac Markers Detection using Micro-Impedimetric Immunosensor Arrays
  114. Vertically Aligned Few-Layered Graphene-Based Non-Cryogenic Bolometer
  115. Corona Discharge-Induced Functional Surfaces of Polycarbonate and Cyclic Olefins Substrates
  116. A Low-Cost Tonometer Alternative: A Comparison Between Photoplethysmogram and Finger Ballistocardiogram and Validation Against Tonometric Waveform
  117. Interpolating Low Amplitude ECG Signals Combined with Filtering According to International Standards Improves Inverse Reconstruction of Cardiac Electrical Activity
  118. Radio Channel Characterization of Mid-Band 5G Service Delivery for Ultra-Low Altitude Aerial Base Stations
  119. An Adaptive Laplacian Based Interpolation Algorithm for Noise Reduction in Body Surface Potential Maps
  120. An unobtrusive sensing solution for home based post-stroke rehabilitation.
  121. Micromachined nanocrystalline graphite membranes for gas separation
  122. Automation bias in medicine: The influence of automated diagnoses on interpreter accuracy and uncertainty when reading electrocardiograms
  123. Quantification of the influence of 0.67 Hz high-pass monitoring filters on the magnitude of the spatial ventricular gradient
  124. Effective Utilization of Waste Red Mud for High Performance Supercapacitor Electrodes
  125. Nanostructured nitrogen doped diamond for the detection of toxic metal ions
  126. A Clear, Delicate, Biocompatible Optical Window for Brain Imaging
  127. Hydrogel as a Nerve Guide and Biocompatible Glue for Neural Applications
  128. AI to enhance interactive simulation-based training in resuscitation medicine
  129. Artificial Intelligence for Long-term Respiratory Disease Management
  130. Internet of Things-Enabled Hospital Wards: Ultrawideband Doctor-Patient Radio Channels
  131. Pulsed Transmission Waveform to Mitigate Tissue Thermal Effects in Transcutaneous Wireless Energy Supply Systems for High-Power Rated Medical Implants
  132. Body-centric wireless hospital patient monitoring networks using body-contoured flexible antennas
  133. A Community-Based IoT Personalized Wireless Healthcare Solution Trial
  134. Fast and controllable elastocapillary flow channels using suspended membranes
  135. Diagnostic Performance of a Combination Biomarker Algorithm for Rule-Out of Acute Myocardial Infarction at Time of Presentation to theEmergency Department, Using Heart-Type Fatty Acid-Binding Protein andHigh-Sensitivity Troponin T tests
  136. Unobtrusive Sensing for Home-Based Post-Stroke Rehabilitation
  137. Bipolar chest leads revisited: The optimal placement of patch based ECG devices
  138. Independent measurement of high blood pressure changes in cuff-less blood pressure monitoring
  139. Label-free Detection of Prostate Specific Antigen at a Screen-printed Immunosensor Modified with a Nanostructured Gold Layer
  140. Heartrate Variability Comparison Between Electrocardiogram, Photoplethysmogram and Ballistic Pulse Waveforms at Fiducial Points
  141. Functional diamond like carbon (DLC) coatings on polymer for improved gas barrier performance
  142. Limitations of the smartphone based single ECG-lead evaluation of STEMI
  143. Structural and compositional changes in single wall carbon nanotube ensemble upon exposure to microwave plasma
  144. Cardiac-gated Slit Lamp Videography as a Novel Approach to Assessing a Microcirculatory Network
  145. Characterizing Dry Electrodes Impedance by Parametric Modeling for Arm Wearable Long-term Cardiac Rhythm Monitoring
  146. Morphology-based Detection of Premature Ventricular Contractions
  147. Novel non-invasive Pressure-Volume Loop measurement for local Pulse Wave Velocity estimation
  148. The Effects of 0.67 Hz High-pass Filtering on the Spatial QRS-T Angle
  149. Wrist and Arm Body Surface Bipolar ECG Leads Signal and Sensor Study for Long-term Rhythm Monitoring
  150. Performance assessment of dry electrodes for wearable long term cardiac rhythm monitoring: Skin-electrode impedance spectroscopy
  151. Wireless chest wearable vital sign monitoring platform for hypertension
  152. Development of an embedded thin-film strain-gauge-based SHM network into 3D-woven composite structure for wind turbine blades
  153. EFFECTS OF SURFACE PROPERTIES ON FLUID ENGINEERING GENERATED BY THE SURFACE-DRIVEN CAPILLARY FLOW OF WATER IN MICROFLUIDIC LAB-ON-A-CHIP SYSTEMS FOR BIOENGINEERING APPLICATIONS
  154. A facile method for the deposition of thermally stable diamond like carbon thin films via carbon dioxide precursor gas
  155. Aloe vera assisted facile green synthesis of reduced graphene oxide for electrochemical and dye removal applications
  156. Novel π-conjugated iron oxide/reduced graphene oxide nanocomposites for high performance electrochemical supercapacitors
  157. 3-D vertically aligned few layer graphene – partially reduced graphene oxide/sulfur electrodes for high performance lithium–sulfur batteries
  158. Human factors analysis of the CardioQuick Patch®: A novel engineering solution to the problem of electrode misplacement during 12-lead electrocardiogram acquisition
  159. Automated detection of atrial fibrillation using R-R intervals and multivariate-based classification
  160. Computing the spatial QRS-T angle using reduced electrocardiographic lead sets
  161. The Effects of 40 Hz Low:pass Filtering on the Spatial QRS:T Angle
  162. Intelligent Subcutaneous Body Area Networks: Anticipating Implantable Devices
  163. The Cardiac Conduction System
  164. Oil swollen surfactant gel based synthesis of metal oxides nanoparticles: An attractive alternative for the conventional sol gel synthesis
  165. Equivalent Circuit Models and Analysis of Electrochemical Impedance Spectra of Caffeine Solutions and Beverages
  166. Detecting the Elusive P-Wave: A New ECG Lead to Improve the Recording of Atrial Activity
  167. Plasma modification of the electronic and magnetic properties of vertically aligned bi-/tri-layered graphene nanoflakes
  168. The derivation of the spatial QRS-T angle and the spatial ventricular gradient using the Mason–Likar 12-lead electrocardiogram
  169. Subcutaneous body area networks: A SWOT analysis
  170. Improved recording of atrial activity by modified bipolar leads derived from the 12-lead electrocardiogram
  171. Future directions of power sources for ambulatory ECG monitors
  172. On the derivation of the spatial QRS-T angle from Mason-Likar leads I, II, V2 and V5
  173. The accuracy of beat-interval based algorithms for detecting atrial fibrillation
  174. The effects of electrode placement on an automated algorithm for detecting ST segment changes on the 12-lead ECG
  175. EXPERIMENTAL STUDIES OF SURFACE-DRIVEN CAPILLARY FLOW IN PMMA MICROFLUIDIC DEVICES PREPARED BY DIRECT BONDING TECHNIQUE AND PASSIVE SEPARATION OF MICROPARTICLES IN MICROFLUIDIC LABORATORY-ON-A-CHIP SYSTEMS
  176. Development and integration of a Surveillance Monitoring solution to provide earlier detection of the deteriorating patient
  177. Kinetics and thermodynamics of human serum albumin adsorption on silicon doped diamond like carbon
  178. Effect of solids concentration on particle size distribution of deagglomerated barium titanate in stirred media mills
  179. NI-CHIC: A Model for Academic Engagement with Industry
  180. Diameter control of single wall carbon nanotubes synthesized using chemical vapor deposition
  181. Graphene Supported Graphone/Graphane Bilayer Nanostructure Material for Spintronics
  182. Demonstrating the accuracy of an in-hospital ambulatory patient monitoring solution in measuring respiratory rate
  183. Comparison between FTIR and XPS characterization of amino acid glycine adsorption onto diamond-like carbon (DLC) and silicon doped DLC
  184. Electrochemical and oxygen reduction properties of pristine and nitrogen-doped few layered graphene nanoflakes (FLGs)
  185. An Investigation into the Electrical Properties of Doped Barium Titanate Using Electrical Impedance Spectroscopy (EIS)
  186. Evaluation of glycine adsorption on diamond like carbon (DLC) and fluorinated DLC deposited by plasma-enhanced chemical vapour deposition (PECVD)
  187. Development of a ubiquitous clinical monitoring solution to improve patient safety and outcomes
  188. The effect of PECVD plasma decomposition on the wettability and dielectric constant changes in silicon modified DLC films for potential MEMS and low stiction applications
  189. An embedded system for on field testing of human identification using ECG biometric
  190. An investigation into the electrical properties of doped barium titanate using EIS
  191. Evaluation of connected health technology
  192. Oxygen plasma assisted end-opening and field emission enhancement in vertically aligned multiwall carbon nanotubes
  193. Exercise training and impaired glucose tolerance in obese humans
  194. Substrate Effects on the Growth of Multiwalled Carbon Nanotubes by Thermal Chemical Vapor Deposition
  195. Plasma-enabled, catalyst-free growth of carbon nanotubes on mechanically-written Si features with arbitrary shape
  196. Nanocrystalline ruthenium oxide dispersed Few Layered Graphene (FLG) nanoflakes as supercapacitor electrodes
  197. Thickness dependent electronic structure of ultra-thin tetrahedral amorphous carbon (ta-C) films
  198. The Challenges Facing Wearable Sensor Systems
  199. Microstructural and electrochemical properties of vertically aligned few layered graphene (FLG) nanoflakes and their application in methanol oxidation
  200. A comparative study of the growth, microstructural and electrical properties of multiwall CNTs grown by thermal and microwave plasma enhanced CVD methods
  201. Structural and surface energy analysis of nitrogenated ta-C films
  202. Vibrational and AFM studies of adsorption of glycine on DLC and silicon-doped DLC
  203. Enhancement of Field Emission Characteristics of Carbon Nanotubes on Oxidation
  204. Comparative in vitro cytotoxicity study of carbon nanotubes and titania nanostructures on human lung epithelial cells
  205. Microwave bonding of poly(methylmethacrylate) microfluidic devices using a conductive polymer
  206. Enhanced and Stable Field Emission from in Situ Nitrogen-Doped Few-Layered Graphene Nanoflakes
  207. An Innovative Piezoelectric-Based Method for Measuring Pulse Wave Velocity in Patients With Hypertension
  208. Enhanced Field Emission and Improved Supercapacitor Obtained from Plasma-Modified Bucky Paper
  209. Exploring the fundamental effects of deposition time on the microstructure of graphene nanoflakes by Raman scattering and X-ray diffraction
  210. Graphene oxide for electrochemical sensing applications
  211. Nanoscale surface modifications to control capillary flow characteristics in PMMA microfluidic devices
  212. The Impact of Acute Moderate Intensity Exercise on Arterial Regional Stiffness, Lipid Peroxidation, and Antioxidant Status in Healthy Males
  213. Wearable Electronic Systems: Applications to Medical Diagnostics/Monitoring
  214. Wi-Fi positioning for ambulatory patient monitoring devices
  215. Microstructure and field emission characteristics of ZnO nanoneedles grown by physical vapor deposition
  216. Evaluation of a CE approved ambulatory patient monitoring device in a general medical ward
  217. Growth of carbon nanotube arrays using nanosphere lithography and their application in field emission devices
  218. Sputter deposition of highly dispersed platinum nanoparticles on carbon nanotube arrays for fuel cell electrode material
  219. Experimental study on capillary flow through polymer microchannel bends for microfluidic applications
  220. Effect of thin aluminum interlayer on growth and microstructure of carbon nanotubes
  221. Transferring vertically aligned carbon nanotubes onto a polymeric substrate using a hot embossing technique for microfluidic applications
  222. Excitation energy dependence of Raman bands in multiwalled carbon nanotubes
  223. Biomedical Sensors for Ambient Assisted Living
  224. Characterisation of PMMA microfluidic channels and devices fabricated by hot embossing and sealed by direct bonding
  225. Sp3 content in ta-C films vs pulse bias width to the substrate: A correlative structural analysis
  226. Arrays of carbon nanoflake spherules realised on copper substrate
  227. Substrate effects on the microstructure of hydrogenated amorphous carbon films
  228. Acute exercise and impaired glucose tolerance in obese humans
  229. Electrical and Raman Spectroscopic Studies of Vertically Aligned Multi-Walled Carbon Nanotubes
  230. Growth and Characterization of Zinc Oxide Nanoneedles
  231. Properties of NiAl and Ni-Al-N Thin Films Deposited by Closed Field Unbalanced Magnetron Sputter Ion Plating Using Elemental Ni and Al Targets
  232. Synthesis and Structural Characterization of Catalyst-Free Carbon Micro-Cones
  233. Experimental and numerical investigation of capillary flow in SU8 and PDMS microchannels with integrated pillars
  234. Complementary Analysis of Metallic Templates Fabricated by Nanosphere Lithography
  235. Effect of Surface Modification on Laminar Flow in Microchannels Fabricated by UV-Lithography
  236. Experimental Demonstration of Hydrophobicity Variation in Carbon Nanotubes by Surface Modifications
  237. Glycine Adsorption onto DLC and N-DLC Thin Films Studied by XPS and AFM
  238. The use of nanotube structures in reducing the turn-on voltage in micro-discharges and micro-gas sensors
  239. Fe catalytic growth, microstructure, and low-threshold field emission properties of open ended tubular graphite cones
  240. Advances on the use of carbon based materials at the biological and surface interface for applications in medical implants
  241. Capillary Flow in Microchannel With Pillars
  242. Endothelial cell growth on silicon modified hydrogenated amorphous carbon thin films
  243. Intrinsic mechanical properties of ultra-thin amorphous carbon layers
  244. Acute Exercise Does Not Change Gastric Emptying And Post-Prandial Lipemia In Men
  245. The effect of acute aerobic exercise on pulse wave velocity and oxidative stress following postprandial hypertriglyceridemia in healthy men
  246. Carbon nanostructures grown with electron and ion beam methods
  247. Exercise and postprandial lipaemia: effects on peripheral vascular function, oxidative stress and gastrointestinal transit
  248. Measuring the thickness of ultra-thin diamond-like carbon films
  249. Nanomanufacturing Handbook
  250. Fabrication of impedimetric sensors for label-free Point-of-Care immunoassay cardiac marker systems, with passive microfluidic delivery
  251. Human microvascular endothelial cellular interaction with atomic N-doped DLC compared with Si-doped DLC thin films
  252. Near edge x-ray absorption fine structure study of aligned π-bonded carbon structures in nitrogenated ta-C films
  253. SPR and AFM study of engineered biomolecule immobilisation techniques
  254. Investigation of local ordering and electronic structure in Si- and hydrogen-doped tetrahedral amorphous carbon thin films
  255. Hydrogen softening and optical transparency in Si-incorporated hydrogenated amorphous carbon films
  256. Oxidative functionalization of carbon nanotubes in atmospheric pressure filamentary dielectric barrier discharge (APDBD)
  257. Electronic structure and photoluminescence study of silicon doped diamond like carbon (Si:DLC) thin films
  258. Electronic properties of a‐CNx thin films: An x-ray-absorption and photoemission spectroscopy study
  259. Mechanical stability, corrosion performance and bioresponse of amorphous diamond-like carbon for medical stents and guidewires
  260. Linear electronic and optical processes in Fullerene thin films
  261. Inorganic and organic linker layers to aid immobilisation for SPR biosensing
  262. Chemical bonding modifications of tetrahedral amorphous carbon and nitrogenated tetrahedral amorphous carbon films induced by rapid thermal annealing
  263. Effect of substrate bias voltage and substrate on the structural properties of amorphous carbon films deposited by unbalanced magnetron sputtering
  264. Electronic structure and hardening mechanism of Si-doped/undoped diamond-like carbon films
  265. The improvement in gas barrier performance and optical transparency of DLC-coated polymer by silicon incorporation
  266. The structure of amorphous carbon nitride films using a combined study of NEXAFS, XPS and Raman spectroscopies
  267. Fundamental Electrochemical Properties of Carbon Nanotube Electrodes
  268. Fundamental Electrochemical Properties of Carbon Nanotube Electrodes
  269. Spectroscopic analysis of a-C and a-CNx films prepared by ultrafast high repetition rate pulsed laser deposition
  270. Surface‐to‐Depth Analysis of Functionalized Multi‐Wall Carbon Nanotubes (FMWCNTS)
  271. NEXAFS study and electrical properties of nitrogen-incorporated tetrahedral amorphous carbon films
  272. The effect of thickness and arc current on the structural properties of FCVA synthesised ta-C and ta-C:N films
  273. High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs
  274. Structural investigation and gas barrier performance of diamond-like carbon based films on polymer substrates
  275. INFLUENCE OF CONFINING GEOMETRY ON THE DIELECTRIC BEHAVIOR OF A FLC SAMPLE HAVING TGBA PHASE
  276. Electronic structure and bonding properties of Si-doped hydrogenated amorphous carbon films
  277. Analysis of excitation processes and electron temperature changes from spectral data in a dc micro plasma discharge
  278. Comparing hardness and wear data for tetrahedral amorphous carbon and hydrogenated amorphous carbon thin films
  279. Bonding configurations in amorphous carbon and nitrogenated carbon films synthesised by femtosecond laser deposition
  280. Experimental determination of compound action potential direction and propagation velocity from multi-electrode nerve cuffs
  281. Thin film platinum cuff electrodes for neurostimulation: in vitro approach of safe neurostimulation parameters
  282. A study of ta-C, a-C:H and Si-a:C:H thin films on polymer substrates as a gas barrier
  283. Bonding configurations in DBOP-FCVA nitrogenated tetrahedral amorphous carbon films studied by Raman and X-ray photoelectron spectroscopies
  284. Deposition of carbon films onto metal and silicon substrates by filtered cathodic vacuum arc, plasma enhanced CVD and unbalanced magnetron sputtering
  285. In-vitro blood compatibility of a-C:H:Si and a-C:H thin films
  286. The effect of silicon doping and thermal annealing on the electrical and structural properties of hydrogenated amorphous carbon thin films
  287. Ultra-thin tetrahedral amorphous carbon films with strong adhesion, as measured by nanoscratch testing
  288. X-ray reflectivity, photoelectron and nanoindentation studies of tetrahedral amorphous carbon (ta-C) films synthesized by double bend cathodic arc
  289. Experimental study of breakdown voltage and effective secondary electron emission coefficient for a micro-plasma device
  290. Platelet adhesion on silicon modified hydrogenated amorphous carbon films
  291. The MTT assays of bovine retinal pericytes and human microvascular endothelial cells on DLC and Si-DLC-coated TCPS
  292. Macrophage responses to vascular stent coatings
  293. The influence of biological fluids on crack spacing distribution in Si-DLC films on steel substrates
  294. Piezoelectric sensor determination of arterial pulse wave velocity
  295. Numerical Modelling of Motion and Heating of Particles during Plasma Spraying
  296. Electrochemical and structural characterizations of electrodeposited iridium oxide thin-film electrodes applied to neurostimulating electrical signal
  297. Fitting Probability Distribution Functions to Saturation Crack Spacing Distribution in Substrate Plastic Straining Test for Thin Films and Coatings
  298. Evaluation of corrosion performance of ultra-thin Si-DLC overcoats with electrochemical impedance spectroscopy
  299. The effects of Si incorporation on the electrochemical and nanomechanical properties of DLC thin films
  300. Plasma Chloriding of Thin-Film Silver
  301. Depth-sensitive analysis of a degraded tin oxide electrode surface in a plasma device application
  302. A novel presenilin mutation (M233V) causing very early onset Alzheimer's disease with Lewy bodies
  303. Chemical bonding and nanomechanical studies of carbon nitride films synthesised by reactive pulsed laser deposition
  304. A study of microstructure and nanomechanical properties of silicon incorporated DLC films deposited on silicon substrates
  305. The insulating properties of a-C:H on silicon and metal substrates
  306. Electrical characteristics of nitrogen incorporated hydrogenated amorphous carbon
  307. Intrinsic stress measured on ultra-thin amorphous carbon films deposited on AFM cantilevers
  308. Surface Modification of Silver Thin Films Using Low Power Chlorine Plasmas
  309. Hardness measurements at shallow depths on ultra-thin amorphous carbon films deposited onto silicon and Al2O3–TiC substrates
  310. The effects of Si incorporation on the microstructure and nanomechanical properties of DLC thin films
  311. Nitrogen doping of amorphous DLC films by rf plasma dissociated nitrogen atom surface bombardment in a vacuum
  312. Naniondentation and scratch resistance testing on magnetic tape heads coated with ultra-thin amorphous carbon layers
  313. Swelling and delamination of multi-electrode sensor arrays studied by variable-pressure scanning electron microscopy
  314. Nanoindentation studies of FeXN (X=Ta, Ti) soft magnetic films
  315. ULTRA-THIN FILM DEPOSITION AND CHARACTERISATION OF 10nm AMORPHOUS CARBON LAYERS FOR APPLICATIONS IN MAGNETIC STORAGE DEVICES
  316. The wear effect on microstructure of DLC films PECVD-deposited on Al2O3:TiC substrates–a confocal micro-Raman study
  317. Complementary analysis techniques for the morphological study of ultrathin amorphous carbon films
  318. Characterisation of thermally annealed diamond like carbon (DLC) and silicon modified DLC films by Raman spectroscopy
  319. Nanomechanical measurements on polymers using contact mode atomic force microscopy
  320. A study of microstructural and electrochemical properties of ultra-thin DLC coatings on altic substrates deposited using the ion beam technique
  321. The effect of the substrate bias on the Raman spectra and thermal stability of diamond-like carbon (DLC) and silicon-modified DLC films prepared by plasma-enhanced chemical vapour deposition (PECVD)
  322. Monitoring laser-induced microstructural changes of thin film hydrogenated amorphous carbon (a-C:H) using Raman spectroscopy
  323. Solid-State Ion-Selective Electrode Arrays
  324. Characterisation of ultra-thin DLC coatings by SEM/EDX, AFM and electrochemical techniques
  325. Pulsed-laser deposition of ZnS and SrS for ACTFEL and field-emission displays
  326. Solid-state sodium-selective sensors based on screen-printed Ag/AgCl reference electrodes
  327. Growth of SrS thin films by pulsed-laser deposition
  328. Etching characteristics of tin oxide thin films in argon–chlorine radio frequency plasmas
  329. Properties of diamond like carbon thin film coatings on stainless steel medical guidewires
  330. Surface modification of thin film gold electrodes for improved in vivo performance
  331. The linear and non-linear electrical properties of the electrode-electrolyte interface
  332. Combined adaptive control with new adaptation laws
  333. The Reactive Ion Etching of Transparent Electrodes for Flat Panel Displays Using Ar/Cl[sub 2] Plasmas
  334. Multi-electrode systems for electrical impedance imaging
  335. The Role of an Electrolysis Reduction in Copper-Electroplating on Transparent Semiconductor Tin Oxide
  336. Portable Cardiac Mapping Assessment of Acute Ischaemic Injury
  337. Impedance plethysmography for the evaluation of pulse-wave velocity in limbs
  338. Computation of the pulse wave velocity in limbs from multichannel impedance plethysmography
  339. NIBEC ECG mapping harness
  340. Preparation of metal film for die attachment and bonding row and column drivers at the display peripheral
  341. Blood pressure in allergic individuals
  342. Mechanical Characterisation and Properties of DLC Films
  343. Stress and Deformation States Associated with Upset Tests in Metals
  344. Grid sensors for biosignal monitoring