All Stories

  1. Comparison of spatial data acquisition techniques for the geometric analysis of lunar regolith

    Article • Measurement, January 2026, Elsevier

    Jacek Katzer

  2. Integration of TLS and HLS Data for Non-Destructive Structural Damage Assessment of Building Structures: A Case Study of a Small Hydropower Plant

    Article • Materials, November 2025, MDPI AG

    Jacek Katzer

  3. Low-cost LiDAR scanning data for geometric and volume analysis of 3D-printed concrete-plastic elements

    Article • Data in Brief, August 2025, Elsevier

    Jacek Katzer

  4. Dynamic Properties of SFRC Made on the Basis of Waste Sand

    Article • Pomiary Automatyka Robotyka, March 2025, PIAP - Industrial Research Institute for Automation and Measurements

    Jacek Katzer

  5. Failure Analysis of Mortar Specimens with a Hexagonal Honeycomb Panel during Fatigue Load

    Article • Periodica Polytechnica Civil Engineering, February 2025, Periodica Polytechnica Budapest University of Technology and Economics

    Jacek Katzer

  6. Effect of Magnetic Separation and Fertilization with Microalgae of Lunar Regolith on Plant Growth

    Article • January 2025, Springer Science + Business Media

    Jacek Katzer

  7. Regolith as raw material for the production of aggregates and concrete-like composites on the Moon

    Article • DELETED, December 2024, Polish Academy of Sciences Chancellery

    Jacek Katzer

  8. Harnessing Two Measurement Techniques to Assess the Internal Structure of SFRC

    Article • Pomiary Automatyka Robotyka, December 2024, PIAP - Industrial Research Institute for Automation and Measurements

    Jacek Katzer

  9. An Example of Using Low-Cost LiDAR Technology for 3D Modeling and Assessment of Degradation of Heritage Structures and Buildings

    Article • Materials, November 2024, MDPI AG

    Jacek Katzer

  10. Remote estimation of cable tension using catenary theory and point clouds obtained by terrestrial laser scanning

    Article • Measurement, August 2024, Elsevier

    Jacek Katzer

  11. A Study of Lunar Regolith Obtained during the Apollo and Luna Space Programs Based on Principal Component Analysis

    Article • Aerospace, April 2024, MDPI AG

    Jacek Katzer

  12. Studying the Potential of iPAD-LiDAR Technology in the Inventory of Building Structures

    Article • Pomiary Automatyka Robotyka, March 2024, PIAP - Industrial Research Institute for Automation and Measurements

    Jacek Katzer

  13. Updating “Intensity dataset acquired through laser scanning of lunar and Martian soil simulants” with additional lunar soil simulants specimens

    Article • Data in Brief, August 2023, Elsevier

    Jacek Katzer

  14. Concept of a 3D-Printed Voronoi Egg-Shaped Habitat for Permanent Lunar Outpost

    Article • Applied Sciences, January 2023, MDPI AG

    Jacek Katzer

  15. Selected Properties of Reinforcing Composite Bars for Concrete Elements Prepared from Waste Polyethylene Terephthalate (PET) Bottles

    Article • Rocznik Ochrona Środowiska, January 2023, Politechnika Koszalinska

    Jacek Katzer

  16. Application of TLS Technology for Documentation of Brickwork Heritage Buildings and Structures

    Article • Coatings, December 2022, MDPI AG

    Jacek Katzer

  17. Terrestrial Laser Scanning of Lunar Soil Simulants

    Article • Materials, December 2022, MDPI AG

    Jacek Katzer

  18. Anti‐terrorist concrete shields absorbing projectiles with no ricochets

    Article • Structural Concrete, November 2022, Wiley

    Jacek Katzer

  19. Mechanical properties of mortar beams reinforced by gyroid 3D printed plastic spatial elements

    Article • Cement and Concrete Composites, November 2022, Elsevier

    Jacek Katzer

  20. Concept of Sustainable Demolition Process for Brickwork Buildings with Expanded Polystyrene Foam Insulation Using Mealworms of Tenebrio molitor

    Article • Materials, October 2022, MDPI AG

    Jacek Katzer

  21. Electrical Resistivity and Strength Parameters of Prismatic Mortar Samples Based on Standardized Sand and Lunar Aggregate Simulant

    Article • Buildings, March 2022, MDPI AG

    Jacek Katzer

  22. Intensity dataset acquired through laser scanning of lunar and Martian soil simulants

    Article • Data in Brief, December 2021, Elsevier

    Jacek Katzer

  23. Strength Characteristics of Alkali-Activated Slag Mortars with the Addition of PET Flakes

    Article • Materials, October 2021, MDPI AG

    Jacek Katzer

  24. Properties of Structural Lightweight Aggregate Concrete Based on Sintered Fly Ash and Modified with Exfoliated Vermiculite

    Article • Materials, October 2021, MDPI AG

    Jacek Katzer

  25. Harnessing 3D Printing of Plastics in Construction—Opportunities and Limitations

    Article • Materials, August 2021, MDPI AG

    Jacek Katzer

  26. Concept of Using 3D Printing for Production of Concrete–Plastic Columns with Unconventional Cross-Sections

    Article • Materials, March 2021, MDPI AG

    Jacek Katzer

  27. Influence of Varied Waste Ceramic Fillers on the Resistance of Concrete to Freeze–Thaw Cycles

    Article • Materials, January 2021, MDPI AG

    Jacek Katzer

  28. Satellite Laser Ranging for Retrieval of the Local Values of the Love h2 and Shida l2 Numbers for the Australian ILRS Stations

    Article • Sensors, November 2020, MDPI AG

    Jacek Katzer

  29. Durability Characteristics of Concrete Mixture Based on Red Ceramic Waste Aggregate

    Article • Sustainability, October 2020, MDPI AG

    Jacek Katzer

  30. An example of harnessing crushed ceramic pots for the production of watertight concrete

    Article • Structural Concrete, August 2020, Wiley

    Jacek Katzer

  31. Effect of 3D Printed Spatial Reinforcement on Flexural Characteristics of Conventional Mortar

    Article • Materials, July 2020, MDPI AG

    Jacek Katzer

  32. A proposition for a lunar aggregate and its simulant

    Article • Advances in Space Research, June 2020, Elsevier

    Jacek Katzer

  33. Remote Detection of Moisture and Bio-Deterioration of Building Walls by Time-Of-Flight and Phase-Shift Terrestrial Laser Scanners

    Article • Remote Sensing, May 2020, MDPI AG

    Jacek Katzer

  34. A Proposition of an In Situ Production of a Blended Cement

    Article • Materials, May 2020, MDPI AG

    Jacek Katzer

  35. Influence of Crimped Steel Fibre on Properties of Concrete Based on an Aggregate Mix of Waste and Natural Aggregates

    Article • Materials, April 2020, MDPI AG

    Jacek Katzer

  36. Determination of the tectonic plates motion parameters based on SLR, DORIS and VLBI stations positions

    Article • Journal of Applied Geodesy, December 2019, De Gruyter

    Mr. Marcin MJ Jagoda, Czesław Suchocki, Jacek Katzer

  37. Lightweight SFRC Benefitting from a Pre-Soaking and Internal Curing Process

    Article • Materials, December 2019, MDPI AG

    Jacek Katzer

  38. Pilbara Craton Soil as A Possible Lunar Soil Simulant for Civil Engineering Applications

    Article • Materials, November 2019, MDPI AG

    Jacek Katzer

  39. A Combined Electromagnetic Induction and Radar-Based Test for Quality Control of Steel Fibre Reinforced Concrete

    Article • Materials, October 2019, MDPI AG

    Jacek Katzer

  40. A Combined Electromagnetic Induction and Radar-based Test for Quality Control of Steel Fibre Reinforced Concrete

    Article • October 2019, MDPI AG

    Jacek Katzer

  41. Multivariate Comparison of Lunar Soil Simulants

    Article • Journal of Aerospace Engineering, September 2019, American Society of Civil Engineers (ASCE)

    Jacek Katzer

  42. Properties of concrete elements with 3-D printed formworks which substitute steel reinforcement

    Article • Construction and Building Materials, June 2019, Elsevier

    Jacek Katzer

  43. Comprehensive approach to evaluation of mechanical properties of waste aggregate concrete reinforced by steel fiber

    Article • Structural Concrete, May 2019, Wiley

    Jacek Katzer

  44. Mechanical Characteristics of SFRC Reinforced by New Engineered Steel Fibre

    Article • January 2019, Springer Science + Business Media

    Jacek Katzer

  45. Granular Materials in Space Exploration

    Article • November 2018, American Society of Civil Engineers (ASCE)

    Jacek Katzer

  46. Terrestrial laser scanning harnessed for moisture detection in building materials – Problems and limitations

    Article • Automation in Construction, October 2018, Elsevier

    Jacek Katzer

  47. TLS Technology in Brick Walls Inspection

    Article • June 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Jacek Katzer

  48. Terrestrial Laser Scanner as a Tool for Assessment of Saturation and Moisture Movement in Building Materials

    Article • Periodica Polytechnica Civil Engineering, February 2018, Periodica Polytechnica Budapest University of Technology and Economics

    Jacek Katzer

  49. Validation of Aramis Digital Image Correlation System for Tests of Fibre Concrete Based on Waste Aggregate

    Article • Key Engineering Materials, January 2018, Trans Tech Publications

    Jacek Katzer

  50. Change of a Crack Propagation Rate in Fine-Grained Cement-Based Composites due to Partial Replacement of Aggregate by Ceramic Waste

    Article • Key Engineering Materials, January 2018, Trans Tech Publications

    Jacek Katzer

  51. Harnessing Terrestrial Laser Scanning for Monitoring of Saturation of Buildings

    Article • Bulletin of the Military University of Technology, December 2017, Index Copernicus

    Jacek Katzer

  52. Specific Dynamic Properties of SFRC Based on Waste Ceramic Aggregate

    Article • October 2017, Springer Science + Business Media

    Jacek Katzer

  53. Comparison of the mechanical characteristics of engineered and waste steel fiber used as reinforcement for concrete

    Article • Journal of Cleaner Production, August 2017, Elsevier

    Jacek Katzer

  54. A study on replacement of sand by granulated ISP slag in SCC as a factor formatting its durability against chloride ions

    Article • Journal of Cleaner Production, July 2017, Elsevier

    Jacek Katzer

  55. Mechanical properties and fibre density of steel fibre reinforced self-compacting concrete slabs by DIA and XCT approaches

    Article • Journal of Civil Engineering and Management, May 2017, Vilnius Gediminas Technical University

    Jacek Katzer

  56. Remote Sensing to Estimate Saturation Differences of Chosen Building Materials Using Terrestrial Laser Scanner

    Article • Reports on Geodesy and Geoinformatics, January 2017, De Gruyter

    Jacek Katzer, Czesław Suchocki

  57. Fracture Mechanical Properties of Cement Based Composites with Various Amount of Waste Aggregates

    Article • Procedia Engineering, January 2017, Elsevier

    Jacek Katzer

  58. An example of harnessing Terrestrial Laser Scanner for remote sensing of saturation of chosen building materials

    Article • Construction and Building Materials, September 2016, Elsevier

    Czesław Suchocki, Jacek Katzer

  59. Fresh Mix Characteristics of Self-Compacting Concrete Reinforced by Fibre

    Article • Periodica Polytechnica Civil Engineering, January 2016, Periodica Polytechnica Budapest University of Technology and Economics

    Jacek Katzer

  60. X-ray computed tomography of fibre reinforced self-compacting concrete as a tool of assessing its flexural behaviour

    Article • Matériaux et Constructions, May 2015, Springer Science + Business Media

    Jacek Katzer

  61. Static And Dynamic Characteristics Of Waste Ceramic Aggregate Fibre Reinforced Concrete

    Article • Transactions of the VŠB - Technical University of Ostrava Civil Engineering Series, January 2015, De Gruyter

    Jacek Katzer

  62. X-ray computed tomography harnessed to determine 3D spacing of steel fibres in self compacting concrete (SCC) slabs

    Article • Construction and Building Materials, January 2015, Elsevier

    Jacek Katzer

  63. Steel fibre spacing in self-compacting concrete precast walls by X-ray computed tomography

    Article • Matériaux et Constructions, October 2014, Springer Science + Business Media

    Jacek Katzer

  64. Determination of 3D porosity in steel fibre reinforced SCC beams using X-ray computed tomography

    Article • Construction and Building Materials, October 2014, Elsevier

    Jacek Katzer

  65. Properties of fresh SCC mix reinforced by different types of steel and polymer fibre

    Article • Construction and Building Materials, July 2014, Elsevier

    Jacek Katzer

  66. Strength performance comparison of mortars made with waste fine aggregate and ceramic fume

    Article • Construction and Building Materials, October 2013, Elsevier

    Jacek Katzer

  67. Optimization of fibre reinforcement for waste aggregate cement composite

    Article • Construction and Building Materials, January 2013, Elsevier

    Jacek Katzer

  68. Impact resistance of sustainable SFRCC road pavement

    Article • The Baltic Journal of Road and Bridge Engineering, October 2012, Vilnius Gediminas Technical University

    Jacek Katzer

  69. Median diameter as a grading characteristic for fine aggregate cement composite designing

    Article • Construction and Building Materials, October 2012, Elsevier

    Jacek Katzer

  70. Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete

    Article • Construction and Building Materials, September 2012, Elsevier

    Jacek Katzer

  71. Impact and dynamic resistance of SFRCC modified by varied superplasticizers

    Article • Archives of Civil and Mechanical Engineering, January 2011, Elsevier

    Jacek Katzer

  72. Brittle Matrix Composites 9

    Article • January 2009, Elsevier

    Professor William Jason Weiss, Jacek Katzer

  73. Combined Non-Destructive Testing Approach to Waste Fine Aggregate Cement Composites

    Article • Science and Engineering of Composite Materials, January 2009, De Gruyter

    Jacek Katzer

  74. PERMEABILITY OF SFRCC BASED ON FINE AGGREGATE AFTER PRE-LOAD CYCLES

    Article • January 2009, Elsevier

    Jacek Katzer

  75. Properties of Precast SFRCC Beams under Harmonic Load

    Article • Science and Engineering of Composite Materials, January 2008, De Gruyter

    Jacek Katzer