All Stories

  1. Behaviour of cement-stabilised silty sands subjected to harsh environmental conditions

    Article • Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, February 2020, ICE Publishing

    Dr J. Antonio H. Carraro

  2. Experimental assessment of sampling disturbance in calcareous silt

    Article • Géotechnique Letters, September 2018, ICE Publishing

    Dr J. Antonio H. Carraro

  3. Durability of RAP-Industrial Waste Mixtures Under Severe Climate Conditions

    Article • Soils and Rocks, August 2018, ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering

    Dr J. Antonio H. Carraro

  4. Durability of reclaimed asphalt pavement–coal fly ash–carbide lime blends under severe environmental conditions

    Article • Road Materials and Pavement Design, August 2018, Taylor & Francis

    Dr J. Antonio H. Carraro

  5. Effects of sampling disturbance in geotechnical design

    Article • Canadian Geotechnical Journal, June 2018, Canadian Science Publishing

    Dr J. Antonio H. Carraro

  6. Laboratory Testing

    Article • January 2018, Wiley

    Dr J. Antonio H. Carraro

  7. Predicted and measured behaviour of an embankment on PVD-improved Ballina clay

    Article • Computers and Geotechnics, January 2018, Elsevier

    Dr J. Antonio H. Carraro

  8. Shear modulus of sand–tyre chip mixtures

    Article • Environmental Geotechnics, April 2017, ICE Publishing

    Dr J. Antonio H. Carraro

  9. Linking Carbonate Sand Fabric and Mechanical Anisotropy from Hollow Cylinder Tests: Motivation and Application

    Article • March 2017, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro

  10. Analysis of simple shear tests with cell pressure confinement

    Article • Geomechanics and Geoengineering, June 2016, Taylor & Francis

    Dr J. Antonio H. Carraro

  11. Stiffness degradation and damping of carbonate and silica sands

    Article • May 2015, Taylor & Francis

    Dr J. Antonio H. Carraro

  12. Recycled materials to stabilise rammed earth: Insights and framework

    Article • January 2015, Taylor & Francis

    Dr J. Antonio H. Carraro

  13. Mechanical Response of Two Carbonate Sediments From Australia’s North West Shelf

    Article • June 2014, ASME International

    Dr J. Antonio H. Carraro

  14. Strain Accumulation Procedure During Staged Cyclic Loading of Carbonate Sediments

    Article • June 2014, ASME International

    Dr J. Antonio H. Carraro

  15. Effects of Compaction Effort, Inclusion Stiffness, and Rubber Size on the Shear Strength and Stiffness of Expansive Soil-Rubber (ESR) Mixtures

    Article • February 2014, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro

  16. Optimum lime content identification for lime-stabilised rammed earth

    Article • Construction and Building Materials, February 2014, Elsevier

    Dr J. Antonio H. Carraro

  17. A New Slurry-Based Method of Preparation of Hollow Cylinder Specimens of Clean and Silty Sands

    Article • Geotechnical Testing Journal, September 2013, ASTM International

    Dr J. Antonio H. Carraro

  18. Shear Strength and Stiffness of Expansive Soil and Rubber (ESR) Mixtures in Undrained Axisymmetric Compression

    Article • March 2011, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro

  19. Stiffness Improvement of Expansive Soil-Rubber Mixtures with Off-Specification Fly Ash

    Article • March 2011, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro

  20. Use of Recyclable Materials in Sustainable Civil Engineering Applications

    Article • Advances in Civil Engineering, January 2011, Hindawi Publishing Corporation

    Dr J. Antonio H. Carraro

  21. Portland Cement Stabilization of Soil–Bentonite for Vertical Cutoff Walls Against Diesel Oil Contaminant

    Article • Geotechnical and Geological Engineering, January 2010, Springer Science + Business Media

    Dr J. Antonio H. Carraro

  22. Shear Strength and Stiffness of Sands Containing Plastic or Nonplastic Fines

    Article • Journal of Geotechnical and Geoenvironmental Engineering, September 2009, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro

  23. Application and feasibility of coal fly ash and scrap tire fiber as wood wall insulation supplements in residential buildings

    Article • Resources Conservation and Recycling, August 2008, Elsevier

    Dr J. Antonio H. Carraro

  24. A New Slurry-Based Method of Preparation of Specimens of Sand Containing Fines

    Article • Geotechnical Testing Journal, January 2008, ASTM International

    Dr J. Antonio H. Carraro

  25. Beneficial Use of Waste Tire Rubber for Swelling Potential Mitigation in Expansive Soils

    Article • October 2007, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro

  26. Undrained monotonic response of clean and silty sands

    Article • Géotechnique, April 2007, ICE Publishing

    Dr J. Antonio H. Carraro

  27. Stiffness degradation and shear strength of silty sands

    Article • Canadian Geotechnical Journal, September 2004, Canadian Science Publishing

    Dr J. Antonio H. Carraro

  28. Liquefaction Resistance of Clean and Nonplastic Silty Sands Based on Cone Penetration Resistance

    Article • Journal of Geotechnical and Geoenvironmental Engineering, November 2003, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro

  29. Closure to “Behavior of Compacted Soil-Fly Ash-Carbide Lime Mixtures” by Nilo Cesar Consoli, Pedro Domingos Marques Prietto, João Anto⁁nio Harb Carraro, and Karla Salvagni Heineck

    Article • Journal of Geotechnical and Geoenvironmental Engineering, December 2002, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro

  30. Behavior of Compacted Soil-Fly Ash-Carbide Lime Mixtures

    Article • Journal of Geotechnical and Geoenvironmental Engineering, September 2001, American Society of Civil Engineers (ASCE)

    Dr J. Antonio H. Carraro