All Stories

  1. Studies on 3D printing of Na3Zr2Si2PO12 ceramic solid electrolyte through Fused Filament Fabrication

    Article • Electrochimica Acta, November 2024, Elsevier

    Dr IJAZ UL MOHSIN

  2. Ni–Cu Bimetallic Oxides with Tailored Morphology for High‐Performance Alkaline Water Oxidation

    Article • ChemistrySelect, October 2024, Wiley

    Dr IJAZ UL MOHSIN

  3. Exploring the reactivity of Na3V2(PO4)3/C and hard carbon electrodes in sodium-ion batteries at various charge states

    Article • Electrochimica Acta, May 2024, Elsevier

    Dr IJAZ UL MOHSIN

  4. Cover Feature: 3D Printing of Na1.3Al0.3Ti1.7(PO4)3 Solid Electrolyte via Fused Filament Fabrication for All‐Solid‐State Sodium‐Ion Batteries (Batteries & Supercaps 1/2024)

    Article • Batteries & Supercaps, December 2023, Wiley

    Dr IJAZ UL MOHSIN

  5. 3D Printing of Na1.3Al0.3Ti1.7(PO4)3 Solid Electrolyte via Fused Filament Fabrication for All‐Solid‐State Sodium‐Ion Batteries

    Article • Batteries & Supercaps, November 2023, Wiley

    Dr IJAZ UL MOHSIN

  6. Zn/Mn co‐doped NiO synthesized by sol‐gel route for the photocatalytic degradation of methylene blue dye

    Article • ChemistrySelect, October 2023, Wiley

    Dr IJAZ UL MOHSIN

  7. Adsorption Thermodynamics, Modeling, and Kinetics Studies for the Removal of Lead Ions Using ZnO Nanorods

    Article • Adsorption Science & Technology, June 2023, Hindawi Publishing Corporation

    Dr IJAZ UL MOHSIN

  8. New Insights into Self‐Discharge and Heat Generation in Magnesium Batteries

    Article • Batteries & Supercaps, June 2023, Wiley

    Dr IJAZ UL MOHSIN

  9. New Insights into Self‐Discharge and Heat Generation in Magnesium Batteries

    Article • Batteries & Supercaps, June 2023, Wiley

    Dr IJAZ UL MOHSIN

  10. New Insights into Self‐Discharge and Heat Generation in Magnesium Batteries

    Article • Batteries & Supercaps, May 2023, Wiley

    Dr IJAZ UL MOHSIN

  11. Barium and strontium doped La-based perovskite synthesis via sol-gel route and photocatalytic activity evaluation for methylene blue

    Article • Results in Physics, February 2023, Elsevier

    Dr IJAZ UL MOHSIN

  12. Enabling the Electrochemical Performance of Maricite-NaMnPO4 and Maricite-NaFePO4 Cathode Materials in Sodium-Ion Batteries

    Article • International Journal of Electrochemistry, January 2023, Hindawi Publishing Corporation

    Dr IJAZ UL MOHSIN

  13. Cationic distributions and dielectric properties of magnesium ferrites fabricated by sol-gel route and photocatalytic activity evaluation

    Article • Zeitschrift für Physikalische Chemie, January 2023, De Gruyter

    Dr IJAZ UL MOHSIN

  14. Heat generation and degradation mechanisms studied on Na3V2(PO4)3/C positive electrode material in full pouch / coin cell assembly

    Article • Journal of Power Sources, October 2022, Elsevier

    Dr IJAZ UL MOHSIN

  15. Investigation of electrochemical reduction and monitoring of p-nitrophenol on imprinted polymer modified electrode

    Article • Synthetic Metals, July 2022, Elsevier

    Dr IJAZ UL MOHSIN

  16. Combined Thermal Runaway Investigation of Coin Cells with an Accelerating Rate Calorimeter and a Tian-Calvet Calorimeter

    Article • Batteries, February 2022, MDPI AG

    Dr IJAZ UL MOHSIN

  17. Dataset of propylene carbonate based liquid electrolyte mixtures for sodium-ion cells

    Article • Data in Brief, February 2022, Elsevier

    Dr IJAZ UL MOHSIN

  18. Comprehensive characterization of propylene carbonate based liquid electrolyte mixtures for sodium-ion cells

    Article • Electrochimica Acta, January 2022, Elsevier

    Dr IJAZ UL MOHSIN

  19. Magnetite/graphene oxide/Prussian blue composite with robust effectiveness for electromagnetic interference shielding

    Article • Ceramics International, January 2022, Elsevier

    Dr IJAZ UL MOHSIN

  20. Ionic and Thermal Transport in Na-Ion-Conducting Ceramic Electrolytes

    Article • International Journal of Thermophysics, July 2021, Springer Science + Business Media

    Dr IJAZ UL MOHSIN

  21. Comprehensive Electrochemical, Calorimetric Heat Generation and Safety Analysis of Na0.53MnO2 Cathode Material in Coin Cells

    Article • Journal of The Electrochemical Society, May 2021, The Electrochemical Society

    Dr IJAZ UL MOHSIN

  22. Cobalt doping of nickel ferrites via sol gel approach: effect of doping on the structural and dielectric properties

    Article • Zeitschrift für Physikalische Chemie, April 2021, De Gruyter

    Dr IJAZ UL MOHSIN

  23. Thermophysical Characterization of a Layered P2 Type Structure Na0.53MnO2 Cathode Material for Sodium Ion Batteries

    Article • Batteries, March 2021, MDPI AG

    Dr IJAZ UL MOHSIN

  24. Heat Generation in NMC622 Coin Cells during Electrochemical Cycling: Separation of Reversible and Irreversible Heat Effects

    Article • Batteries, November 2020, MDPI AG

    Dr IJAZ UL MOHSIN

  25. Evaluation of conductive polymers as an adsorbent for eradication of As (III) from aqueous solution using inductively coupled plasma optical emission spectroscopy (ICP-OES)

    Article • International Journal of Science and Engineering, April 2014, Chemical Engineering Diponegoro University

    Dr IJAZ UL MOHSIN

  26. Thermodynamics of Biosorption for Removal of Co(II) Ions by an Efficient and Ecofriendly Biosorbent (Saccharum bengalense): Kinetics and Isotherm Modeling

    Article • Journal of Chemistry, January 2013, Hindawi Publishing Corporation

    Dr IJAZ UL MOHSIN

  27. Finite element investigation of backbone binder removal from MIM copper compact

    Article • Powder Metallurgy, December 2012, Taylor & Francis

    Dr IJAZ UL MOHSIN

  28. Optimization of gas chromatographic analysis of halogenated acids in drinking water using full factorial experimental design

    Article • Desalination and Water Treatment, November 2012, Taylor & Francis

    Dr IJAZ UL MOHSIN

  29. Sintering of Fe–C–BN steel compacts in different atmospheres studied by dilatometry and DTA/TG

    Article • Powder Metallurgy, July 2012, Taylor & Francis

    Dr IJAZ UL MOHSIN

  30. Thermal debinding study of powder injection moulded Fe+12%Cu using TG/MS

    Article • Powder Metallurgy, April 2012, Taylor & Francis

    Dr IJAZ UL MOHSIN

  31. Finite element sintering analysis of metal injection molded copper brown body using thermo-physical data and kinetics

    Article • Computational Materials Science, February 2012, Elsevier

    Dr IJAZ UL MOHSIN

  32. Biosorptive removal of lead and cadmium ions from aqueous solution: The use of carrot residues as low cost non-conventional adsorbent

    Article • Turkish Journal of Biochemistry, January 2012, LookUs Bilisim, Ltd.

    Dr IJAZ UL MOHSIN

  33. Equilibrium, Thermodynamics, and Kinetic Sorption Studies for the Removal of Coomassie Brilliant Blue on Wheat Bran as a Low-Cost Adsorbent

    Article • Journal of Analytical Methods in Chemistry, January 2012, Hindawi Publishing Corporation

    Dr IJAZ UL MOHSIN

  34. Thermal de-binding kinetics of injection molded W-8%Ni-2%Cu

    Article • International Journal of Refractory Metals and Hard Materials, November 2011, Elsevier

    Dr IJAZ UL MOHSIN

  35. Sintering study of injection molded W–8%Ni–2%Cu compacts from mixed powders by thermoanalytical techniques

    Article • International Journal of Refractory Metals and Hard Materials, July 2011, Elsevier

    Dr IJAZ UL MOHSIN

  36. Simulation and optimisation for thermal debinding of copper MIM parts using thermokinetic analysis

    Article • Powder Metallurgy, February 2011, Taylor & Francis

    Dr IJAZ UL MOHSIN

  37. Sintering/shrinkage kinetics of metal injection molded copper brown body

    Article • Materials Letters, November 2010, Elsevier

    Dr IJAZ UL MOHSIN

  38. Thermo-kinetics study of MIM thermal de-binding using TGA coupled with FTIR and mass spectrometry

    Article • Thermochimica Acta, May 2010, Elsevier

    Dr IJAZ UL MOHSIN