Contact

All Stories

  1. TERAHERTZ PROBING AS AN INDICATOR FOR DETECTING THE ONSET OF BIORESORPTION OF GYROID POLYACTIDE TPMS SCAFFOLDS

    Article • Izvestiya vysshikh uchebnykh zavedenii Radiofizika, January 2026, National Research Lobachevsky State University of Nizhny Novgorod

    Professor Igor V Shishkovsky

  2. 3D Printed Hierarchical Lattice Metamaterials: Integration of Mechanical Strength and Ultrasonic Sensitivity for Biomedical Applications

    Article • Bulletin of the Lebedev Physics Institute, December 2025, Allerton Press

    Professor Igor V Shishkovsky

  3. Crack Formation Mechanisms and Mitigation Strategies in Gradient Composites of AISI 316L Stainless Steel and UNS C61800 Aluminium Bronze Fabricated by Direct Energy Deposition

    Article • Russian Metallurgy (Metally), August 2025, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  4. Structural and mechanical properties of the additive manufactured CrFeCoNi(Al,Ti) high-entropy alloys produced using powder blends

    Article • Materialia, December 2023, Elsevier

    Professor Igor V Shishkovsky

  5. The assessment of permeability of biological implant structure using DLP-manufactured TPMS lattice physical models

    Article • Materials Today Proceedings, November 2023, Elsevier

    Professor Igor V Shishkovsky

  6. Thermal-structural hybrid Lagrangian solver and numerical simulation-based correction of shape deformation of stainless-steel parts produced by laser powder bed fusion

    Article • Scientific Reports, October 2023, Springer Science + Business Media

    Professor Igor V Shishkovsky

  7. Fabrication of hierarchical lattice structures from zirconia stabilized ceramics by micro-SLA 3D printing approach

    Article • Ceramics International, September 2023, Elsevier

    Professor Igor V Shishkovsky

  8. In-plane measurements and computational fluid dynamics prediction of permeability for biocompatible NiTi gyroid scaffolds fabricated via laser powder bed fusion

    Article • International Journal of Bioprinting, August 2023, Inno Science Press

    Professor Igor V Shishkovsky

  9. 3D Bioprinting of Hyaline Articular Cartilage: Biopolymers, Hydrogels, and Bioinks

    Article • Polymers, June 2023, MDPI AG

    Professor Igor V Shishkovsky

  10. Laser Polishing of Nickel-Titanium Shape Memory Alloy Produced via Laser Powder Bed Fusion

    Article • Metals and Materials International, April 2023, Springer Science + Business Media

    Professor Igor V Shishkovsky

  11. Laser In Situ Synthesis of Gradient Fe-Ti Composite during Direct Energy Deposition Process

    Article • Journal of Manufacturing and Materials Processing, March 2023, MDPI AG

    Professor Igor V Shishkovsky

  12. The oxidation behavior of the CrFeCoNiAlx (x = 0, 1.0, and 5.0 wt%) high-entropy alloy synthesized with Al elemental powder via powder bed fusion technique at high temperatures

    Article • Micron, March 2023, Elsevier

    Professor Igor V Shishkovsky

  13. SLM Additive Manufacturing of NiTi Porous Implants: A Review of Constitutive Models, Finite Element Simulations, Manufacturing, Heat Treatment, Mechanical, and Biomedical Studies

    Article • Metals and Materials International, February 2023, Springer Science + Business Media

    Professor Igor V Shishkovsky

  14. Prediction of The Mechanical Behavior of Polylactic Acid Parts with Shape Memory Effect Fabricated by FDM

    Article • Polymers, February 2023, MDPI AG

    Professor Igor V Shishkovsky

  15. Linear Thermal Expansion and Specific Heat Capacity of Cu-Fe System Laser-Deposited Materials

    Article • Metals, February 2023, MDPI AG

    Professor Igor V Shishkovsky

  16. Surface Tension Measurements of Equiatomic Niti Alloy for the Melt Pool Simulation During Laser Powder Bed Fusion

    Article • January 2023, Elsevier

    Professor Igor V Shishkovsky

  17. Topological Design of 3D Biopolymer Scaffolds and Their Mechanical Features

    Article • January 2023, Springer Science + Business Media

    Professor Igor V Shishkovsky

  18. Piezoelectric properties of the 3D-printed lead-free ceramics

    Article • Ferroelectrics, December 2022, Taylor & Francis

    Professor Igor V Shishkovsky

  19. Mechanical characteristics of laser-deposited sandwich structures and quasi-homogeneous alloys of Fe-Cu system

    Article • Materials & Design, December 2022, Elsevier

    Professor Igor V Shishkovsky

  20. Pore healing effect of laser polishing and its influence on fatigue properties of 316L stainless steel parts fabricated by laser powder bed fusion

    Article • Optics & Laser Technology, December 2022, Elsevier

    Professor Igor V Shishkovsky

  21. The effect of particle size of highland and mare lunar regolith simulants on their printability in vat polymerisation additive manufacturing

    Article • Ceramics International, December 2022, Elsevier

    Professor Igor V Shishkovsky

  22. Research on Cracked Conditions in Nickel Chrome Alloy Ni50Cr33W4.5Mo2.8TiAlNb, Obtained by Direct Laser Deposition

    Article • Metals, November 2022, MDPI AG

    Professor Igor V Shishkovsky, Vitaliy Smelov

  23. Piezo Ceramic Technology for Environmental Impact Mitigation

    Article • Glass and Ceramics, November 2022, Springer Science + Business Media

    Professor Igor V Shishkovsky

  24. The Study on Resolution Factors of LPBF Technology for Manufacturing Superelastic NiTi Endodontic Files

    Article • Materials, September 2022, MDPI AG

    Professor Igor V Shishkovsky

  25. Additively Manufactured Hierarchical Auxetic Mechanical Metamaterials

    Article • Materials, August 2022, MDPI AG

    Professor Igor V Shishkovsky

  26. Characterization of novel lunar highland and mare simulants for ISRU research applications

    Article • Icarus, April 2022, Elsevier

    Professor Igor V Shishkovsky

  27. The Fabrication and Characterization of BaTiO3 Piezoceramics Using SLA 3D Printing at 465 nm Wavelength

    Article • Materials, January 2022, MDPI AG

    Professor Igor V Shishkovsky

  28. Thermodynamic Conditions for Consolidation of Dissimilar Materials in Bimetal and Functional Graded Structures

    Article • Materials, January 2022, MDPI AG

    Professor Igor V Shishkovsky

  29. Evaluation of Stereolithography-Based Additive Manufacturing Technology for BaTiO3 Ceramics at 465 nm

    Article • Applied Sciences, January 2022, MDPI AG

    Professor Igor V Shishkovsky

  30. Determination of the polymerization depths of lead-free piezoceramic pastes for UV 3D printing

    Article • Optics and Spectroscopy, January 2022, Ioffe Institute Russian Academy of Sciences

    Professor Igor V Shishkovsky

  31. Investigation of approaches to the BaTiO-=SUB=-3-=/SUB=- piezoceramics production: the influence of the shaping method and the powder particles size

    Article • Technical Physics Letters, January 2022, Ioffe Institute Russian Academy of Sciences

    Professor Igor V Shishkovsky

  32. Synthesis of potassium-sodium niobate powder in water vapor for piezoelectric ceramics manufacturing

    Article • Technical Physics Letters, January 2022, Ioffe Institute Russian Academy of Sciences

    Professor Igor V Shishkovsky

  33. Practical Approbation of Thermodynamic Criteria for the Consolidation of Bimetallic and Functionally Gradient Materials

    Article • Metals, December 2021, MDPI AG

    Professor Igor V Shishkovsky, Vitaliy Smelov

  34. Selective Laser Melting of Pre-Alloyed NiTi Powder: Single-Track Study and FE Modeling with Heat Source Calibration

    Article • Materials, December 2021, MDPI AG

    Professor Igor V Shishkovsky

  35. Progress and challenges of 3D-printing technologies in the manufacturing of piezoceramics

    Article • Ceramics International, April 2021, Elsevier

    Professor Igor V Shishkovsky

  36. Regolith-based additive manufacturing for sustainable development of lunar infrastructure – An overview

    Article • Acta Astronautica, March 2021, Elsevier

    Professor Igor V Shishkovsky

  37. Analytical Evaluation of the Dendritic Structure Parameters and Crystallization Rate of Laser-Deposited Cu-Fe Functionally Graded Materials

    Article • Materials, December 2020, MDPI AG

    Professor Igor V Shishkovsky

  38. Direct Energy Deposition of Cu-Fe System Functionally Graded Structures

    Article • IOP Conference Series Materials Science and Engineering, November 2020, Institute of Physics Publishing

    Professor Igor V Shishkovsky

  39. Hybrid anisotropic pentamode mechanical metamaterial produced by additive manufacturing technique

    Article • Applied Physics Letters, August 2020, American Institute of Physics

    Professor Igor V Shishkovsky

  40. Influence of laser cycling on electro-structural features of nickel-titanium SMA fabricated by LPBF process

    Article • Applied Surface Science, April 2020, Elsevier

    Professor Igor V Shishkovsky

  41. 4D Laser Printing of Functionally Graded Structures and Items from Mixtures of Powdered Polymers with Functional Micro- and Nanoparticles: An Autoreview

    Article • International Journal of Self-Propagating High-Temperature Synthesis, April 2020, Allerton Press

    Professor Igor V Shishkovsky

  42. Mechanical properties of NiCrBSi self-fluxing alloy after LPBF with additional heating

    Article • Procedia CIRP, January 2020, Elsevier

    Professor Igor V Shishkovsky

  43. Specific aspects of the transitional layer forming in the aluminium bronze - stainless steel functionally graded structures after laser metal deposition

    Article • Procedia CIRP, January 2020, Elsevier

    Professor Igor V Shishkovsky

  44. Nano-size ceramic reinforced 3D biopolymer scaffolds: Tribomechanical testing and stem cell activity

    Article • Composite Structures, October 2018, Elsevier

    Professor Igor V Shishkovsky

  45. The Setup Design for Selective Laser Sintering of High-Temperature Polymer Materials with the Alignment Control System of Layer Deposition

    Article • Machines, March 2018, MDPI AG

    Professor Igor V Shishkovsky

  46. Selective Laser Fusion of Titanium Based Gradient Alloy Reinforced by Nano Sized TiC Ceramic

    Article • Materials Science Forum, March 2018, Trans Tech Publications

    Professor Igor V Shishkovsky

  47. 4D manufacturing of intermetallic SMA fabricated by SLM process

    Article • February 2018, SPIE

    Professor Igor V Shishkovsky

  48. Rapid TMC laser prototyping: compositional and phase-structural sustainability via combinatorial design of titanium-based gradient alloy reinforced by nano-sized TiC or TiB2 ceramics

    Article • February 2018, SPIE

    Professor Igor V Shishkovsky

  49. Laser-assisted nanoceramics reinforced polymer scaffolds for tissue engineering: additional heating and stem cells behavior

    Article • February 2018, SPIE

    Professor Igor V Shishkovsky

  50. Metal matrix composites with ternary intermetallic inclusions fabricated by laser direct energy deposition

    Article • Composite Structures, January 2018, Elsevier

    Professor Igor V Shishkovsky

  51. Biocompatible features of magnetic nano-oxide core/ PCL shell 3D composites fabricated via SLS/M process 

    Article • Advanced Materials Letters, January 2018, International Association of Advanced Materials

    Professor Igor V Shishkovsky

  52. Fabrication of heat-resisting nickel composite gradient structures with TiC nano additive during powder bed fusion process

    Article • Procedia CIRP, January 2018, Elsevier

    Professor Igor V Shishkovsky

  53. Room temperature ferromagnetism in mixed-phase titania nanoparticles produced by the levitation–jet generator

    Article • Journal of Materials Science Materials in Electronics, November 2017, Springer Science + Business Media

    Professor Igor V Shishkovsky

  54. Graded layered titanium composite structures with TiB 2 inclusions fabricated by selective laser melting

    Article • Composite Structures, June 2017, Elsevier

    Professor Igor V Shishkovsky

  55. Effect of size of nickel nanoparticles on hydrogenation of benzene

    Article • Petroleum Chemistry, May 2017, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  56. Cytotoxicity and apoptotic effects of polymer coated copper oxide nanoparticles synthesized via SLM in mesenchymal stem cells

    Article • Opto-electronics, March 2017, Springer Science + Business Media

    Professor Igor V Shishkovsky

  57. Heat transfer and diffusion-controlled kinetics of liquid–solid phase in titanium matrix composite during selective laser melting

    Article • Opto-electronics, January 2017, Springer Science + Business Media

    Professor Igor V Shishkovsky

  58. Thermoelectric properties of gradient polymer composites with nano-inclusions fabricated by laser assisted sintering

    Article • Laser Physics Letters, January 2017, Institute of Physics Publishing

    Professor Igor V Shishkovsky

  59. Fabrication of Gradient Structures in the Ni - Al System via SLM Process

    Article • Procedia IUTAM, January 2017, Elsevier

    Professor Igor V Shishkovsky

  60. Laser Post Annealing of Cold-sprayed Al–Ni Composite Coatings for Green Energy Tasks

    Article • Procedia IUTAM, January 2017, Elsevier

    Professor Igor V Shishkovsky

  61. Comparative Study of Selective Laser Melting and Direct Laser Metal Deposition of Ni 3 Al Intermetallic Alloy

    Article • Procedia IUTAM, January 2017, Elsevier

    Professor Igor V Shishkovsky

  62. Gradient core–shell HTS/polymer covered magnetoactive composites with ultrafine particles fabricated by 3D printing

    Article • Opto-electronics, October 2016, Springer Science + Business Media

    Professor Igor V Shishkovsky

  63. Solidification behavior and dendrite structure refinement after LMD in Ti based alloy reinforced by micron- and nano- alumina

    Article • Opto-electronics, September 2016, Springer Science + Business Media

    Professor Igor V Shishkovsky

  64. Experimental study of conditions for the 3D laser cladding of nickel aluminide

    Article • Bulletin of the Russian Academy of Sciences Physics, August 2016, Allerton Press

    Professor Igor V Shishkovsky

  65. Direct Metal Deposition by Laser in TiNi-Al System for Graded Structure Fabrication

    Article • IOP Conference Series Materials Science and Engineering, July 2016, Institute of Physics Publishing

    Professor Igor V Shishkovsky

  66. Layer-by-layer laser synthesis of Cu–Al–Ni intermetallic compounds and shape memory effect

    Article • Inorganic Materials, May 2016, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  67. Peculiarities of selective laser melting process for permalloy powder

    Article • Materials Letters, May 2016, Elsevier

    Professor Igor V Shishkovsky

  68. Producing thin-walled BrA9 bronze components by selective laser melting

    Article • Russian Engineering Research, April 2016, Allerton Press

    Professor Igor V Shishkovsky

  69. Laser-assisted synthesis in Cu–Al–Ni system and some of its properties

    Article • Journal of Alloys and Compounds, February 2016, Elsevier

    Professor Igor V Shishkovsky

  70. A Study of the Structure of Nickel Aluminide After Laser Treatment

    Article • Metal Science and Heat Treatment, January 2016, Springer Science + Business Media

    Professor Igor V Shishkovsky

  71. Comparative Study of Selective Laser Melting and Direct Laser Metal Deposition of Ni3Al Intermetallic Alloy

    Article • Materials Science Forum, November 2015, Trans Tech Publications

    Professor Igor V Shishkovsky

  72. Laser Post Annealing of Cold-Sprayed Al–Ni Composite Coatings for Green Energy Tasks

    Article • Materials Science Forum, November 2015, Trans Tech Publications

    Professor Igor V Shishkovsky

  73. Layerwise laser-assisted sintering and some properties of iron oxide core/PEEK shell magnetic nanocomposites

    Article • Microelectronic Engineering, October 2015, Elsevier

    Professor Igor V Shishkovsky

  74. Laser post annealing of cold-sprayed Al/alumina–Ni composite coatings

    Article • Surface and Coatings Technology, June 2015, Elsevier

    Professor Igor V Shishkovsky

  75. Laser-assisted fabrication of tissue engineering scaffolds from titanium alloys

    Article • January 2015, Elsevier

    Professor Igor V Shishkovsky

  76. Laser-controlled intermetallics synthesis during surface cladding

    Article • January 2015, Elsevier

    Professor Igor V Shishkovsky

  77. Gas-dynamic spraying of hydroxyapatite on medical instruments from titanium alloy

    Article • Russian Journal of Non-Ferrous Metals, May 2014, Allerton Press

    Professor Igor V Shishkovsky

  78. Simulation of thermomechanical and electrothermal hysteresis phenomena in porous nickel titanium

    Article • Technical Physics, February 2014, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  79. Investigation of the catalytic activity of copper nanoparticles sintered with polycarbonate in benzene hydrogenation

    Article • Protection of Metals and Physical Chemistry of Surfaces, January 2014, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  80. Peculiarities of substrate mass loss under micron pulse laser direct structuring

    Article • December 2013, SPIE

    Professor Igor V Shishkovsky

  81. Manufacturing three-dimensional nickel titanium articles using layer-by-layer laser-melting technology

    Article • Technical Physics Letters, December 2013, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  82. Influence of the laser assisted fabricated 3D porous scaffolds from bioceramoplasts of micron and nano sizes on culture of MMSC

    Article • November 2013, SPIE

    Professor Igor V Shishkovsky

  83. Low-dose laser sintering of Cu nanoparticles on the ceramic substrate during ink-jet interconnection

    Article • November 2013, SPIE

    Professor Igor V Shishkovsky

  84. Layering fabrication, structure, and electromagnetic properties of perovskite phases by hybrid process: self-propagated high-temperature synthesis and selective laser sintering

    Article • Phase Transitions, November 2013, Taylor & Francis

    Professor Igor V Shishkovsky

  85. Layering laser-assisted sintering of functional graded porous PZT ceramoplasts

    Article • Phase Transitions, November 2013, Taylor & Francis

    Professor Igor V Shishkovsky

  86. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping

    Article • September 2013, Taylor & Francis

    Professor Igor V Shishkovsky

  87. Experimental and numerical modelling of function-graded porous filter elements, synthesized by the SLS method

    Article • September 2013, Taylor & Francis

    Professor Igor V Shishkovsky

  88. Electrical and Magnetic Properties of Multilayer Polymer Structures with Nano Inclusions as Prepared by Selective Laser Sintering

    Article • Journal of Nanoscience and Nanotechnology, February 2013, American Scientific Publishers

    Professor Igor V Shishkovsky

  89. Hysteresis modeling of porous SMA for drug delivery system designed and fabricated by the laser-assisted sintering

    Article • MRS Proceedings, January 2013, Springer Science + Business Media

    Professor Igor V Shishkovsky

  90. Nano and micro- structural self-organization of implant surface from nitinol, fabricated by laser control SHS

    Article • MRS Proceedings, January 2013, Springer Science + Business Media

    Professor Igor V Shishkovsky

  91. Titanium base functional graded coating via 3D laser cladding

    Article • Materials Letters, April 2012, Elsevier

    Professor Igor V Shishkovsky

  92. Peculiar features of electrical resistivity and phase structure in 3-D porous nitinol after selective laser sintering/melting process

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, March 2012, SAGE Publications

    Professor Igor V Shishkovsky

  93. MMSSC Chemotaxis near Porous Surface of Biocompatible NiTi Scaffolds Synthesized by Selective Laser Sintering (SLS)

    Article • MRS Proceedings, January 2012, Springer Science + Business Media

    Professor Igor V Shishkovsky

  94. Functional design of porous drug delivery systems based on laser assisted manufactured nitinol

    Article • MRS Proceedings, January 2012, Springer Science + Business Media

    Professor Igor V Shishkovsky

  95. Direct Metal Deposition of Functional Graded Structures in Ti- Al System

    Article • Physics Procedia, January 2012, Elsevier

    Professor Igor V Shishkovsky

  96. Direct Selective Laser Melting of Nitinol Powder

    Article • Physics Procedia, January 2012, Elsevier

    Professor Igor V Shishkovsky

  97. Hysteresis Modeling of the Porous Nitinol Delivery System, Designed and Fabricated By Sls Method

    Article • Physics Procedia, January 2012, Elsevier

    Professor Igor V Shishkovsky

  98. Laser synthesis and comparative testing of a three-dimensional porous matrix of titanium and titanium nickelide as a repository for stem cells

    Article • Powder Metallurgy and Metal Ceramics, January 2012, Springer Science + Business Media

    Professor Igor V Shishkovsky

  99. Selective Laser Sintering of Biopolymers with Micro and Nano Ceramic Additives for Medicine

    Article • Physics Procedia, January 2012, Elsevier

    Professor Igor V Shishkovsky

  100. Selective laser sintering/melting of nitinol–hydroxyapatite composite for medical applications

    Article • Powder Metallurgy and Metal Ceramics, September 2011, Springer Science + Business Media

    Professor Igor V Shishkovsky

  101. Multilayer polymer structures containing Ni/Cu nanoclusters as prepared by selective laser sintering

    Article • International Journal of Self-Propagating High-Temperature Synthesis, March 2011, Allerton Press

    Professor Igor V Shishkovsky

  102. Laser assisted fabrication of porous polymer MEMS with nano structured additives

    Article • MRS Proceedings, January 2011, Springer Science + Business Media

    Professor Igor V Shishkovsky

  103. Chemical and physical vapor deposition methods for nanocoatings

    Article • January 2011, Elsevier

    Professor Igor V Shishkovsky

  104. Porous titanium and nitinol implants synthesized by SHS/SLS: Microstructural and histomorphological analyses of tissue reactions

    Article • International Journal of Self-Propagating High-Temperature Synthesis, June 2010, Allerton Press

    Professor Igor V Shishkovsky

  105. Submicron nucleation kinetics during a high‐speed laser assisted surface modification

    Article • physica status solidi (a), May 2010, Wiley

    Professor Igor V Shishkovsky

  106. Stress–strain analysis of porous scaffolds made from titanium alloys synthesized via SLS method

    Article • Applied Surface Science, September 2009, Elsevier

    Professor Igor V Shishkovsky

  107. Titanium and aluminum nitride synthesis via layer by layer LA-CVD

    Article • Applied Surface Science, September 2009, Elsevier

    Professor Igor V Shishkovsky

  108. Computer-controlled synthesis of orthopedic implants

    Article • International Journal of Self-Propagating High-Temperature Synthesis, June 2009, Allerton Press

    Professor Igor V Shishkovsky

  109. Manufacturing of fine-structured 3D porous filter elements by selective laser melting

    Article • Applied Surface Science, March 2009, Elsevier

    Professor Igor V Shishkovsky

  110. Nanostructural self-organization under selective laser sintering of exothermic powder mixtures

    Article • Applied Surface Science, March 2009, Elsevier

    Professor Igor V Shishkovsky

  111. Electromotive force measurements in the combustion wave front during layer-by-layer surface laser sintering of exothermic powder compositions

    Article • Physical Chemistry Chemical Physics, January 2009, Royal Society of Chemistry

    Professor Igor V Shishkovsky

  112. Design of Three-Dimensional Functional Articles via Layer-by-Layer Laser Sintering of Exothermic Powder Mixtures

    Article • Materials and Manufacturing Processes, July 2008, Taylor & Francis

    Professor Igor V Shishkovsky

  113. Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi

    Article • Journal of Materials Chemistry, January 2008, Royal Society of Chemistry

    Professor Igor V Shishkovsky

  114. Alumina–zirconium ceramics synthesis by selective laser sintering/melting

    Article • Applied Surface Science, December 2007, Elsevier

    Professor Igor V Shishkovsky

  115. Nanofractal surface structure under laser sintering of titanium and nitinol for bone tissue engineering

    Article • Applied Surface Science, December 2007, Elsevier

    Professor Igor V Shishkovsky

  116. Surface Laser Sintering of exothermic powder compositions

    Article • Journal of Thermal Analysis and Calorimetry, October 2007, Springer Science + Business Media

    Professor Igor V Shishkovsky

  117. EMF measurements across the front of combustion wave during layer by layer surface laser sintering of exothermal powder compositions

    Article • June 2007, SPIE

    Professor Igor V Shishkovsky

  118. Optimization of the fine structure and flow behavior of anisotropic porous filters, synthesized by SLS method

    Article • June 2007, SPIE

    Professor Igor V Shishkovsky

  119. Porous surface structure of biocompatible implants and tissue scaffolds base of titanium and nitinol synthesized SLS/M methods

    Article • June 2007, SPIE

    Professor Igor V Shishkovsky

  120. Modelling of the thermal processes that occur during laser sintering of reacting powder compositions

    Article • Applied Physics A, April 2006, Springer Science + Business Media

    Professor Igor V Shishkovsky

  121. Modeling of thermal processes in laser sintering of reactive powder compositions

    Article • Journal of Engineering Physics and Thermophysics, November 2005, Springer Science + Business Media

    Professor Igor V Shishkovsky

  122. Shape Memory Effect in Porous Volume NiTi Articles Fabricated by Selective Laser Sintering

    Article • Technical Physics Letters, January 2005, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  123. Laser-induced combustion synthesis of 3D functional materials: computer-aided design

    Article • Journal of Materials Chemistry, January 2004, Royal Society of Chemistry

    Professor Igor V Shishkovsky

  124. Article • Glass and Ceramics, January 2003, Springer Science + Business Media

    Professor Igor V Shishkovsky

  125. Laser synthesis of functional graded filter elements from metal-polymer powder compositions

    Article • April 2002, SPIE

    Professor Igor V Shishkovsky

  126. Thermoviscoplasticity of powder composition under selective laser sintering

    Article • April 2002, SPIE

    Professor Igor V Shishkovsky

  127. Synthesis of functional gradient parts via RP methods

    Article • Rapid Prototyping Journal, October 2001, Emerald

    Professor Igor V Shishkovsky

  128. Laser-controlled synthesis of nickel-aluminum intermetallic compounds

    Article • Technical Physics Letters, June 2001, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  129. The synthesis of a biocomposite based on nickel titanium and hydroxyapatite under selective laser sintering conditions

    Article • Technical Physics Letters, March 2001, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  130. Structure and properties of porous PZT ceramics synthesized by selective laser sintering method

    Article • June 2000, SPIE

    Professor Igor V Shishkovsky

  131. Selective laser sintering of PZT ceramic powders

    Article • Technical Physics Letters, March 2000, Pleiades Publishing Ltd

    Professor Igor V Shishkovsky

  132. Conditions for SHS of intermetallic compounds with selective laser sintering of powdered compositions

    Article • Combustion Explosion and Shock Waves, March 1999, Springer Science + Business Media

    Professor Igor V Shishkovsky

  133. <title>Formation of intermetallic phases under laser sintering of powdered SHS compositions</title>

    Article • January 1999, SPIE

    Professor Igor V Shishkovsky

  134. Physical characteristics of selective laser sintering of metal—polymer powder composites

    Article • Quantum Electronics, May 1998, Institute of Physics Publishing

    Professor Igor V Shishkovsky

  135. Physical principles of simulation and optimization of laser-induced surface hardening of steels

    Article • Journal of Russian Laser Research, March 1996, Springer Science + Business Media

    Professor Igor V Shishkovsky

  136. Calculation of residual stresses induced during laser quench-hardening of steel

    Article • Journal of Engineering Physics, December 1991, Springer Science + Business Media

    Professor Igor V Shishkovsky

  137. Theoretical and numerical analysis of stresses in a laser hardening model

    Article • Journal of Soviet Laser Research, January 1991, Springer Science + Business Media

    Professor Igor V Shishkovsky

  138. Calculation of the characteristics of a hardened layer using a model of laser steel hardening

    Article • Soviet Journal of Quantum Electronics, August 1989, Institute of Physics Publishing

    Professor Igor V Shishkovsky