All Stories

  1. In vitro biocompatibility evaluation of three-dimensionally printed resin crowns for primary molars

    Article • Odontology, January 2026, Springer Science + Business Media

    Prof. Hyeonjong LEE

  2. Quantitative assessment of tooth wear using intraoral scanners: A comparative analysis of two monitoring tools

    Article • Journal of Dentistry, December 2025, Elsevier

    Prof. Hyeonjong LEE

  3. Palatal bone healing after removal of miniscrew-assisted rapid palatal expansion devices

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, December 2025, Elsevier

    Prof. Hyeonjong LEE

  4. Shear bond strength of zirconia orthodontic brackets depending on surface pretreatment of bonding base

    Article • Scientific Reports, November 2025, Springer Science + Business Media

    Prof. Hyeonjong LEE

  5. Quantitative and Color‐Coded Assessment of Crown Preparation Using a 3D‐Printed Channel and Hole Guide: A Pilot Comparison With Conventional Guides

    Article • Journal of Dental Education, September 2025, Wiley

    Prof. Hyeonjong LEE

  6. Deformation analysis of 3D-printed three-unit fixed partial dentures according to various cleaning strategies after DLP 3D printing: a geometric library matching approach

    Article • The Journal of Advanced Prosthodontics, January 2025, XMLink

    Prof. Hyeonjong LEE

  7. Influence of postprinting cleaning methods on the cleaning efficiency and surface and mechanical properties of three-dimensionally printed resins

    Article • Journal of Prosthetic Dentistry, October 2024, Elsevier

    Prof. Hyeonjong LEE

  8. Influence of crown shade, translucency, and scan powder application on the trueness of intraoral scanners

    Article • Journal of Dentistry, May 2024, Elsevier

    Prof. Hyeonjong LEE

  9. Volumetric Analysis of Peri-implant Tissue Change Over Time: Validating an Innovative 3D Method

    Article • The International Journal of Oral & Maxillofacial Implants, April 2024, Quintessence Publishing

    Prof. Hyeonjong LEE

  10. Influence of limited mouth opening in children on intraoral scanning accuracy: An in vitro study

    Article • International Journal of Paediatric Dentistry, March 2024, Wiley

    Prof. Hyeonjong LEE

  11. Reliability of digital repeated-scan superimposition and single-scan techniques for wear volume loss assessment on flat surfaces

    Article • Journal of Dentistry, November 2023, Elsevier

    Prof. Hyeonjong LEE

  12. Strength and Surface Characteristics of 3D-Printed Resin Crowns for the Primary Molars

    Article • Polymers, October 2023, MDPI AG

    Prof. Hyeonjong LEE

  13. AUTONOMOUS ROBOTIC SURGERY SEEMS PROMISING AS AN ACCURATE TECHNOLOGY FOR SINGLE-TOOTH IMPLANT PLACEMENT IN THE ESTHETIC ZONE

    Article • Journal of Evidence Based Dental Practice, September 2023, Elsevier

    Prof. Hyeonjong LEE

  14. Three-Dimensional Peri-Implant Tissue Changes in Immediately vs. Early Placed Tapered Implants Restored with Two Different Ceramic Materials—1 Year Results

    Article • Materials, August 2023, MDPI AG

    Prof. Hyeonjong LEE

  15. A comprehensive study on the mechanical effects of implant-supported prostheses under multi-directional loading and different occlusal contact points

    Article • BMC Oral Health, May 2023, Springer Science + Business Media

    Prof. Hyeonjong LEE

  16. 3D analysis of occlusal registration through geometry embedded library matching between quadrant and full-arch digital impression

    Article • Clinical Oral Investigations, April 2023, Springer Science + Business Media

    Prof. Hyeonjong LEE

  17. Guided Autotransplantation of Impacted Canines Using a CAD/CAM Surgical Template

    Article • Children, April 2023, MDPI AG

    Prof. Hyeonjong LEE

  18. Automated vector analysis to design implant-supported prostheses: A dental technique

    Article • Journal of Prosthetic Dentistry, February 2023, Elsevier

    Prof. Hyeonjong LEE

  19. Bisphenol A release from commercially available 3-dimensionally printed resins and human cell apoptosis to bisphenol A: an in-vitro study

    Article • Journal of Clinical Pediatric Dentistry, January 2023, MRE Press

    Prof. Hyeonjong LEE

  20. Occlusal adjustment of 3-unit tooth-supported fixed dental prostheses fabricated with complete-digital and -analog workflows: A crossover clinical trial

    Article • Journal of Dentistry, January 2023, Elsevier

    Prof. Hyeonjong LEE

  21. Strategy to obtain an accurate occlusal registration using intraoral scanners

    Article • The Journal of The Korean Dental Association, December 2022, Korean Dental Association

    Prof. Hyeonjong LEE

  22. Stress distribution in pediatric zirconia crowns depending on different tooth preparation and cement type: a finite element analysis

    Article • BMC Oral Health, December 2022, Springer Science + Business Media

    Prof. Hyeonjong LEE

  23. Effects of implant diameter, implant-abutment connection type, and bone density on the biomechanical stability of implant components and bone: A finite element analysis study

    Article • Journal of Prosthetic Dentistry, October 2022, Elsevier

    Prof. Hyeonjong LEE

  24. Effects of assessing the bone remodeling process in biomechanical finite element stability evaluations of dental implants

    Article • Computer Methods and Programs in Biomedicine, June 2022, Elsevier

    Prof. Hyeonjong LEE

  25. Mechanical Properties of Additively Manufactured and Milled Interim 3‐Unit Fixed Dental Prostheses

    Article • Journal of Prosthodontics, May 2022, Wiley

    Prof. Hyeonjong LEE

  26. Digital Wear Analysis of Different CAD/CAM–Fabricated Monolithic Ceramic Implant- Supported Single Crowns Using Two Optical Scanners

    Article • The International Journal of Prosthodontics, May 2022, Quintessence Publishing

    Prof. Hyeonjong LEE

  27. Comparison of digital and conventional assessment methods for a single tooth preparation and educational satisfaction

    Article • European Journal Of Dental Education, April 2022, Wiley

    Prof. Hyeonjong LEE

  28. Retention force and stress distribution analysis of the cementless double crown–type implant-supported prosthesis

    Article • Journal of Prosthetic Dentistry, April 2022, Elsevier

    Prof. Hyeonjong LEE

  29. Three‐dimensional evaluation of tooth preparation forms in paediatric zirconia crowns: An in vitro study

    Article • International Journal of Paediatric Dentistry, November 2021, Wiley

    Prof. Hyeonjong LEE

  30. Influence of adjacent teeth on the accuracy of intraoral scanning systems for class II inlay preparation

    Article • Journal of Esthetic and Restorative Dentistry, October 2021, Wiley

    Prof. Hyeonjong LEE

  31. Customized surgical guide with a bite block and retraction arm for a deeply impacted odontoma; a technical note

    Article • Journal of Stomatology Oral and Maxillofacial Surgery, September 2021, Elsevier

    Prof. Hyeonjong LEE

  32. Evaluation of the effect of contamination of the scan-mirror of an intra-oral scanner on the accuracy of the scan data: A pilot study

    Article • The Journal of The Korean Dental Association, June 2021, Korean Dental Association

    Prof. Hyeonjong LEE

  33. A Survey on dental personnel’s perceptions of digital dentistry and dental digital equipment

    Article • The Journal of The Korean Dental Association, May 2021, Korean Dental Association

    Prof. Hyeonjong LEE

  34. Accuracy of Customized Abutment Data Superimposition According to the Extent of the Scanning Area

    Article • The International Journal of Prosthodontics, May 2021, Quintessence Publishing

    Prof. Hyeonjong LEE

  35. Fundamental understandings of mesh process and various formats of digital data in digital dentistry

    Article • Journal of Dental Implant Research, March 2021, The Korean Academy of Implant Dentistry

    Prof. Hyeonjong LEE

  36. Biomechanical effects of dental implant diameter, connection type, and bone density on microgap formation and fatigue failure: A finite element analysis

    Article • Computer Methods and Programs in Biomedicine, March 2021, Elsevier

    Prof. Hyeonjong LEE

  37. Full mouth rehabilitation with vertical dimension increase in patient with severely worn out dentition: A case report

    Article • The Journal of Korean Academy of Prosthodontics, January 2021, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  38. Implant-assisted removable partial denture using digital guide surgery in partially edentulous mandible: A case report

    Article • The Journal of Korean Academy of Prosthodontics, January 2021, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  39. In vitro analysis of intraoral digital impression of inlay preparation according to tooth location and cavity type

    Article • Journal of Prosthodontic Research, January 2021, Japan Prosthodontic Society

    Prof. Hyeonjong LEE

  40. Implant placement in the removable mandibular advancement device for completely edentulous patients: a finite element study

    Article • Journal of Computational Design and Engineering, September 2020, Oxford University Press (OUP)

    Prof. Hyeonjong LEE

  41. Three-Dimensional Evaluation of Peri-implant Soft Tissue When Tapered Implants Are Placed: Pilot Study with Implants Placed Immediately or Early Following Tooth Extraction

    Article • The International Journal of Oral & Maxillofacial Implants, September 2020, Quintessence Publishing

    Prof. Hyeonjong LEE

  42. Feasibility of 3-Dimensional Visual Guides for Preparing Pediatric Zirconia Crowns: An In Vitro Study

    Article • International Journal of Environmental Research and Public Health, August 2020, MDPI AG

    Prof. Hyeonjong LEE

  43. Accuracy of Vertical Dimension Augmentation Using Different Digital Methods Compared to a Clinical Situation—A Pilot Study

    Article • The International Journal of Prosthodontics, July 2020, Quintessence Publishing

    Prof. Hyeonjong LEE

  44. In silico evaluation of the peripheral and inner seals in complete denture master impressions using a custom-developed 3D software

    Article • Clinical Oral Investigations, June 2020, Springer Science + Business Media

    Prof. Hyeonjong LEE

  45. Validation of a three‐dimensional printed model for training of surgical extraction of supernumerary teeth

    Article • European Journal Of Dental Education, May 2020, Wiley

    Prof. Hyeonjong LEE

  46. CAD-CAM milled dentures: The Geneva protocols for digital dentures

    Article • Journal of Prosthetic Dentistry, January 2020, Elsevier

    Prof. Hyeonjong LEE

  47. Virtual diagnostics and guided tooth preparation for the minimally invasive rehabilitation of a patient with extensive tooth wear: A validation of a digital workflow

    Article • Journal of Prosthetic Dentistry, January 2020, Elsevier

    Prof. Hyeonjong LEE

  48. Implant-assisted removable partial denture using freely removable abutment in a fully edentulous patient: A case report

    Article • The Journal of Korean Academy of Prosthodontics, January 2020, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  49. A conversion to implant assisted removable partial denture in failed fixed implant prosthesis of mandible: A case report

    Article • The Journal of Korean Academy of Prosthodontics, January 2020, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  50. Clinical accuracy of impression technique using digital superimposition of customized abutment with subgingival margin: A case report

    Article • The Journal of Korean Academy of Prosthodontics, January 2020, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  51. Implant-assisted removable partial denture using milled bar and Locator in partially edentulous maxilla: A case report

    Article • The Journal of Korean Academy of Prosthodontics, January 2020, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  52. Biomechanical stress and microgap analysis of bone-level and tissue-level implant abutment structure according to the five different directions of occlusal loads

    Article • The Journal of Advanced Prosthodontics, January 2020, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  53. Fabrication of dentures for a patient with unstable mandibular movements: A case report

    Article • The Journal of Korean Academy of Prosthodontics, January 2020, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  54. Interdisciplinary Approach to Treat Unusual Development of Dens Evaginatus: A Case Report

    Article • Journal of Clinical Pediatric Dentistry, January 2020, MRE Press

    Prof. Hyeonjong LEE

  55. Changes in Density of Peri-implant Bone due to Bone Remodeling according to Implant Structure and Initial Conditions

    Article • Transactions of the Korean Society of Mechanical Engineers A, November 2019, The Korean Society of Mechanical Engineers

    Prof. Hyeonjong LEE

  56. Evaluating the Wear of Resin Teeth by Different Opposing Restorative Materials

    Article • Materials, November 2019, MDPI AG

    Prof. Hyeonjong LEE

  57. Designing a mandibular advancement device with topology optimization for a partially edentulous patient

    Article • Journal of Prosthetic Dentistry, October 2019, Elsevier

    Prof. Hyeonjong LEE

  58. Feasibility of a 3D Surgical Guide Technique for Impacted Supernumerary Tooth Extraction: A Pilot Study with 3D Printed Simulation Models

    Article • Applied Sciences, September 2019, MDPI AG

    Prof. Hyeonjong LEE

  59. A CAD-CAM device for preparing guide planes for removable partial dentures: A dental technique

    Article • Journal of Prosthetic Dentistry, July 2019, Elsevier

    Prof. Hyeonjong LEE

  60. Combining Conventional Impressions and Intraoral Scans: A Technique for the Treatment of Complete Denture Patients with Flabby Tissue

    Article • Journal of Prosthodontics, April 2019, Wiley

    Prof. Hyeonjong LEE

  61. Biomechanical analysis of 4 types of short dental implants in a resorbed mandible

    Article • Journal of Prosthetic Dentistry, April 2019, Elsevier

    Prof. Hyeonjong LEE

  62. Effect of additional firing process after sintering of monolithic zirconia crown on marginal and internal fitness

    Article • The Journal of Korean Academy of Prosthodontics, January 2019, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  63. Effects of cementless fixation of implant prosthesis: A finite element study

    Article • The Journal of Advanced Prosthodontics, January 2019, XMLink

    Prof. Hyeonjong LEE

  64. Three-Dimensional Digitalized Surface and Volumetric Analysis of Posterior Prefabricated Zirconia Crowns for Children

    Article • Journal of Clinical Pediatric Dentistry, January 2019, MRE Press

    Prof. Hyeonjong LEE

  65. Biomechanical effect of mandibular advancement device with different protrusion positions for treatment of obstructive sleep apnoea on tooth and facial bone: A finite element study

    Article • Journal of Oral Rehabilitation, September 2018, Wiley

    Professor SuJin Ahn, Prof. Hyeonjong LEE

  66. A Method for Minimizing Rotational Errors of Implant Prostheses

    Article • The International Journal of Oral & Maxillofacial Implants, September 2017, Quintessence Publishing

    Prof. Hyeonjong LEE

  67. Precise Reproduction of Soft Tissue Structure around the Pontic Area Using Computer-Aided Design and Manufacturing

    Article • Journal of Prosthodontics, August 2017, Wiley

    Prof. Hyeonjong LEE

  68. A simplified method for evaluating the 3-dimensional cement space of dental prostheses by using a digital scanner

    Article • Journal of Prosthetic Dentistry, April 2017, Elsevier

    Prof. Hyeonjong LEE

  69. Stress analysis of mandibular implant overdenture with locator and bar/clip attachment: Comparative study with differences in the denture base length

    Article • The Journal of Advanced Prosthodontics, January 2017, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE

  70. Comparative Analysis of Screw Loosening With Prefabricated Abutments and Customized CAD/CAM Abutments

    Article • Implant Dentistry, December 2016, Wolters Kluwer Health

    Prof. Hyeonjong LEE

  71. Fabrication of a CAD/CAM monolithic zirconia crown to fit an existing partial removable dental prosthesis

    Article • The Journal of Advanced Prosthodontics, January 2016, The Korean Academy of Prosthodontics (KAMJE)

    Prof. Hyeonjong LEE