All Stories

  1. Droplet evaporation on superhydrophobic surfaces
  2. Water Drop Evaporation on Slippery Liquid-Infused Porous Surfaces (SLIPS): Effect of Lubricant Thickness, Viscosity, Ridge Height, and Pattern Geometry
  3. Wetting of Superhydrophobic Polylactic Acid Micropillared Patterns
  4. Li–S batteries: effect of uniaxial compression on the electrical conductivity and electrochemical performance of graphene aerogel cathodes
  5. Precursor film formation on catalyst–electrolyte–gas boundaries during CO2 electroreduction with gas diffusion electrodes
  6. Extrusion-Based 3D Printing Applications of PLA Composites: A Review
  7. Dependency of Contact Angles on Three-Phase Contact Line: A Review
  8. Polysiloxane Nanofilaments Infused with Silicone Oil Prevent Bacterial Adhesion and Suppress Thrombosis on Intranasal Splints
  9. Industrial applications of superhydrophobic coatings: Challenges and prospects
  10. Practical Applications of Superhydrophobic Materials and Coatings: Problems and Perspectives
  11. Simple Model for Diffusion-Limited Drop Evaporation of Binary Liquids from Physical Properties of the Components: Ethanol–Water Example
  12. Solvent-Free Synthesis of a Superamphiphobic Surface by Green Chemistry
  13. Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
  14. Transparent, fluorine-free, heat-resistant, water repellent coating by infusing slippery silicone oil on polysiloxane nanofilament layers prepared by gas phase reaction of n-propyltrichlorosilane and methyltrichlorosilane
  15. Evaporation of water-ethanol binary sessile drop on fluoropolymer surfaces: Influence of relative humidity
  16. Wet-spun graphene filaments: effect of temperature of coagulation bath and type of reducing agents on mechanical & electrical properties
  17. Improvement of lubricant-infused surfaces for anti-icing applications
  18. Methyltrichlorosilane polysiloxane filament growth on glass using low cost solvents and comparison with gas phase reactions
  19. Superhydrophobic perfluoropolymer/polystyrene blend films induced by nonsolvent
  20. Ice accretion by spraying supercooled droplets is not dependent on wettability and surface free energy of substrates
  21. Superhydrophobic polysiloxane filament growth on non-activated polymer coatings
  22. ChemInform Abstract: Control of Stain Geometry by Drop Evaporation of Surfactant Containing Dispersions
  23. Improved Icephobic Properties on Surfaces with a Hydrophilic Lubricating Liquid
  24. Superhydrophobic and oleophobic surfaces obtained by graft copolymerization of perfluoroalkyl ethyl acrylate onto SBR rubber
  25. Control of stain geometry by drop evaporation of surfactant containing dispersions
  26. The debate on the dependence of apparent contact angles on drop contact area or three-phase contact line: A review
  27. Effect of surface free energy to control the deposit morphology during evaporation of graphite/SDS dispersion drops
  28. Solution copolymerization of perfluoroalkyl ethyl methacrylate with methyl methacrylate and butyl acrylate: Synthesis and surface properties
  29. Perfluoromethacrylate-styrene statistical copolymers synthesized in CO2-expanded monomers
  30. Comments on the Energy Barrier Calculations during “Stick–Slip” Behavior of Evaporating Droplets Containing Nanoparticles
  31. Osteoselection supported by phase separated polymer blend films
  32. Superhydrophobic perfluoropolymer surfaces having heterogeneous roughness created by dip-coating from solutions containing a nonsolvent
  33. Selective adsorption of L1210 leukemia cells/human leukocytes on micropatterned surfaces prepared from polystyrene/polypropylene-polyethylene blends
  34. Shape and diameter control of C60 fullerene micro-stains by evaporation of aqueous SDS–fullerene dispersion drops
  35. The lifetime of floating liquid marbles: the influence of particle size and effective surface tension
  36. Droplet condensation on polymer surfaces: A review
  37. Bioadhesion to solids: contact angle hysteresis effect
  38. Dropwise condensation rate of water breath figures on polymer surfaces having similar surface free energies
  39. Use of diffusion controlled drop evaporation equations for dropwise condensation during dew formation and effect of neighboring droplets
  40. Surface characterization of flat and rough films of perfluoromethacrylate-methylmethacrylate statistical copolymers synthesized in CO2-expanded monomers
  41. Superhydrophobic terpolymer nanofibers containing perfluoroethyl alkyl methacrylate by electrospinning
  42. ChemInform Abstract: Evaporation of Pure Liquid Sessile and Spherical Suspended Drops: A Review
  43. Evaporation of pure liquid sessile and spherical suspended drops: A review
  44. A spectroscopic study of water-soluble pyronin B and pyronin Y in Langmuir–Blodgett films mixed with stearic acid
  45. Combined XPS and contact angle studies of flat and rough ethylene-vinyl acetate copolymer films
  46. Diffusion-controlled evaporation of sodium dodecyl sulfate solution drops placed on a hydrophobic substrate
  47. Combined XPS and contact angle studies of ethylene vinyl acetate and polyvinyl acetate blends
  48. Effect of pattern size and geometry on the use of Cassie–Baxter equation for superhydrophobic surfaces
  49. Liquid marbles stabilized by graphite particles from aqueous surfactant solutions
  50. Mechanical and thermal properties of perfluoroalkyl ethyl methacrylate–methyl methacrylate statistical copolymers synthesized in supercritical carbon dioxide
  51. Bacterial Adhesion to Low Energy Solid Surfaces: A Surface Thermodynamics Approach
  52. Experimental investigation of inclined liquid water jet flow onto vertically located superhydrophobic surfaces
  53. Effect of contact angle hysteresis on the removal of the sporelings of the green alga Ulva from the fouling-release coatings synthesized from polyolefin polymers
  54. Range of Applicability of the Wenzel and Cassie−Baxter Equations for Superhydrophobic Surfaces†
  55. Evaporation rate of PTFE liquid marbles
  56. Evaporation Rate of Graphite Liquid Marbles: Comparison with Water Droplets
  57. Surface Chemistry of Solid and Liquid Interfaces. By H. Y. Erbil.
  58. Surface Characterization of Poly(l-lactic acid)−Methoxy Poly(ethylene glycol) Diblock Copolymers by Static and Dynamic Contact Angle Measurements, FTIR, and ATR-FTIR
  59. Surface Chemistry of Solid and Liquid Interfaces, by H. Yildirim Erbil
  60. Surface Chemistry
  61. Analysis of Droplet Evaporation on a Superhydrophobic Surface
  62. Transformation of a Simple Plastic into a Superhydrophobic Surface
  63. Vinyl acetate emulsion polymerization and copolymerization with acrylic monomers H Yildirim Erbil CRC Press, Boca Raton, FL, 2000 pp xii + 324, price US$149.95 ISBN 0-849-3 2303-7
  64. Semicontinuous emulsion polymerization of vinyl acetate: Effect of ethoxylation degree of nonionic emulsifiers
  65. Simultaneous Determination of Toluene Diffusion Coefficient in Air from Thin Tube Evaporation and Sessile Drop Evaporation on a Solid Surface
  66. Drop Evaporation on Solid Surfaces:  Constant Contact Angle Mode
  67. Analysis of evaporating thick liquid films on solids
  68. Analysis of Shape Distortions in Sessile Drops
  69. Vinyl Acetate Emulsion Polymerization and Copolymerization with Acrylic Monomers By H. Yildirim Erbil (Kocaeli University, Turkey). CRC Press:  Boca Raton, FL. 2000. xii + 324 pp. $139.95. ISBN 0-8493-2303-7
  70. Determination of Diffusion Coefficient−Vapor Pressure Product of Some Liquids from Hanging Drop Evaporation
  71. Vinyl Acetate Emulsion Polymerization and Copolymerization with Acrylic Monomers
  72. Surface free-energy analysis of energetic poly(glycidyl azide) networks prepared by different reactive systems
  73. Surface free-energy analysis of energetic poly(glycidyl azide) networks prepared by different reactive systems
  74. Determination of the Receding Contact Angle of Sessile Drops on Polymer Surfaces by Evaporation
  75. Determination of the peripheral contact angle of sessile drops on solids from the rate of evaporation
  76. Analysis of evaporating droplets using ellipsoidal cap geometry
  77. Determination of the Peripheral Contact Angle of Sessile Drops on Solids from the Rate of Drop Evaporation
  78. Evaporation of Sessile Drops on Solid Surfaces: Pseudospherical Cap Geometry
  79. Surface Characterization of the Hydroxy-Terminated Poly(ε-caprolactone)/Poly(dimethylsiloxane) Triblock Copolymers by Electron Spectroscopy for Chemical Analysis and Contact Angle Measurements
  80. Evaporation of Sessile Drops on Polymer Surfaces:  Ellipsoidal Cap Geometry
  81. Surface energetics of films of poly(vinyl acetate—butyl acrylate) emulsion copolymers
  82. Surface free energy analysis of polystyrene-poly(?-hydroxynonanoate) graft copolymers
  83. Calculation of Spreading Pressure from Contact Angle Data on Polymer Surfaces
  84. Work of adhesion between water and substituted aromatic hydrocarbons
  85. The work of adhesion between water and simple aromatic hydrocarbons due to short range interactions
  86. Determination of spreading pressure and its effect on polymer surface tension from contact angle data. Combination of the two-liquid contact angle method with the one-liquid contact angle method
  87. Oxygen permeability and surface free energy properties of silicone-containing copolymers of methyl methacrylate
  88. Determination of surface free energy components of polymers from contact angle data using nonlinear programming methods
  89. Determination of polymer-solvent interaction parameter from swelling of networks: the system poly(2-hydroxyethyl methacrylate)-diethylene glycol
  90. Surface-free energy analysis of hydrolyzed ethylene-vinyl acetate copolymers
  91. LENGTHENING THE POSTHARVEST LIFE OF PEACHES BY COATING WITH HYDROPHOBIC EMULSIONS
  92. A new colorimetric method for the determination of the “dissolved” oxygen permeability coefficients of polymeric membranes