Contact

All Stories

  1. Synergistic effect of cement mortar types and encapsulated healing agents on crack healing in sustained notched concrete beams subjected to flexural loads

    Article • Scientific Reports, November 2025, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  2. Implementing a novel procedure of ACI 544.2R drop-weight impact test to measure the residual compressive strength after impact of multi-layered fiber-reinforced concrete with different patterns

    Article • Structures, October 2025, Elsevier

    Professor Hossam El-Din Sallam

  3. Enhancing the tribological performance of polymeric laminated composite materials by adopting the functionally graded materials technique

    Article • Archives of Civil and Mechanical Engineering, May 2025, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  4. Quasistatic tensile and flexural behaviors of fiber metal laminates after subjecting to uniaxial tensile impact loading

    Article • Scientific Reports, May 2025, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  5. Fracture behavior of Al/GFRP/Al sandwich panels under uniaxial static and impact tensile loadings

    Article • Journal of Sandwich Structures & Materials, April 2025, SAGE Publications

    Professor Hossam El-Din Sallam

  6. Effect of β-spodumene additions on the phase composition, thermal, mechanical, and fracture behavior of zirconia toughened alumina composites

    Article • Journal of Materials Research and Technology, July 2024, Elsevier

    Professor Hossam El-Din Sallam

  7. Long term behavior of rubberized concrete under static and dynamic loads

    Article • Case Studies in Construction Materials, July 2024, Elsevier

    Professor Hossam El-Din Sallam

  8. Implementation of a new approach based on the functionally graded materials concept to improve the strength of laminated composites containing open‐hole

    Article • Polymer Composites, June 2024, Wiley

    Professor Hossam El-Din Sallam

  9. Effect of fiber addition on strength and toughness of rubberized concretes

    Article • Scientific Reports, February 2024, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  10. Failure assessment of hip stem due to pelvic positioning and femoral stem loosening

    Article • Fatigue & Fracture of Engineering Materials & Structures, November 2023, Wiley

    Professor Hossam El-Din Sallam

  11. Utilization of Various Industrial Wastes in Ordinary Concrete Under Normal Manufacturing Conditions

    Article • International Journal of Concrete Structures and Materials, August 2023, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  12. Mechanical properties of sustainable concrete comprising various wastes

    Article • Scientific Reports, August 2023, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  13. Applicability of CMOD to Obtain the Actual Fracture Toughness of Rightly-Cracked Fibrous Concrete Beams

    Article • Buildings, August 2023, MDPI AG

    Professor Hossam El-Din Sallam

  14. The efficiency of advanced polymeric composite sleeves in the rehabilitation of cracked pipelines under combined loadings

    Article • Journal of Materials Research and Technology, July 2023, Elsevier

    Professor Hossam El-Din Sallam

  15. Effect of Mold Casting Parameters in Interface Properties of Iron/Copper Bimetallic Composites Based upon an Ancient Quranic Metal Matrix Composite (QMMC)

    Article • International Journal of Metalcasting, June 2023, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  16. Implementing functionally graded fibers technique to enhance pinned-joint performance in cross-ply laminate polymeric composites

    Article • Composite Structures, June 2023, Elsevier

    Professor Hossam El-Din Sallam

  17. Numerical study and experimental validation of the size effect of smooth and mode I cracked semi-circular bend specimens

    Article • Scientific Reports, May 2023, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  18. Effect of hybrid nanoparticles additions to normal weight concrete on its microstructures and mechanical properties before and after exposure to gamma-rays

    Article • Construction and Building Materials, May 2023, Elsevier

    Professor Hossam El-Din Sallam

  19. An investigation of wear, mechanical, and water sorption/solubility behaviors of a commercial restorative composite containing nano-additives

    Article • Journal of Materials Research and Technology, March 2023, Elsevier

    Professor Hossam El-Din Sallam

  20. Flexural and fracture behaviors of functionally graded long fibrous polymeric composite beam-like specimens

    Article • Composite Structures, November 2022, Elsevier

    Professor Hossam El-Din Sallam

  21. Lateral Impact Response of Rubberized-Fibrous Concrete-Filled Steel Tubular Columns: Experiment and Numerical Study

    Article • Buildings, September 2022, MDPI AG

    Professor Hossam El-Din Sallam

  22. Mechanical Behavior of Epoxy Reinforced by Hybrid Short Palm/Glass Fibers

    Article • Sustainability, August 2022, MDPI AG

    Professor Hossam El-Din Sallam

  23. Mixed-mode fracture toughness of high strength FRC: a realistic experimental approach

    Article • Archives of Civil and Mechanical Engineering, July 2022, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  24. Effect of crack and fiber length on mode I fracture toughness of matrix-cracked FRC beams

    Article • Construction and Building Materials, July 2022, Elsevier

    Professor Hossam El-Din Sallam

  25. Effect of reinforcement type on structural behavior of RC beams containing recycled aggregate

    Article • Fracture and Structural Integrity, June 2022, Gruppo Italiano Frattura

    Professor Hossam El-Din Sallam

  26. The Applicability of TOPSIS- and Fuzzy TOPSIS-Based Taguchi Optimization Approaches in Obtaining Optimal Fiber-Reinforced Concrete Mix Proportions

    Article • Buildings, June 2022, MDPI AG

    Professor Hossam El-Din Sallam

  27. Mechanical and Tribological Behavior of Functionally Graded Unidirectional Glass Fiber-Reinforced Epoxy Composites

    Article • Polymers, May 2022, MDPI AG

    Professor Hossam El-Din Sallam

  28. Structural Behavior of RC Beams Containing Unreinforced Drilled Openings with and without CFRP Strengthening

    Article • Polymers, May 2022, MDPI AG

    Professor Hossam El-Din Sallam

  29. Real fracture toughness of FRC and FGC: size and boundary effects

    Article • Archives of Civil and Mechanical Engineering, March 2022, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  30. Fracture toughness of matrix cracked FRC and FGC beams using equivalent TPFM

    Article • Fracture and Structural Integrity, March 2022, Gruppo Italiano Frattura

    Professor Hossam El-Din Sallam

  31. The Effect of Reinforcement Preheating Temperatures on Tribological Behavior of Advanced Quranic Metal-Matrix Composites (QMMC)

    Article • Materials, January 2022, MDPI AG

    Professor Hossam El-Din Sallam

  32. Experimental assessment of different strengthening techniques for opening in reinforced concrete beams

    Article • Fracture and Structural Integrity, December 2021, Gruppo Italiano Frattura

    Professor Hossam El-Din Sallam

  33. Intrinsic fracture toughness of fiber reinforced and functionally graded concretes: An innovative approach

    Article • Engineering Fracture Mechanics, December 2021, Elsevier

    Professor Hossam El-Din Sallam

  34. Time-dependent behavior of NSM strengthened RC beams under sustained loading

    Article • Engineering Structures, November 2021, Elsevier

    Professor Hossam El-Din Sallam

  35. Flexural behavior of functionally graded concrete beams with different patterns

    Article • Archives of Civil and Mechanical Engineering, October 2021, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  36. An Assessment of ASTM E1922 for Measuring the Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials

    Article • Polymers, September 2021, MDPI AG

    Professor Hossam El-Din Sallam

  37. Experimental gamma-ray attenuation and theoretical optimization of barite concrete mixtures with nanomaterials against neutrons and gamma rays

    Article • Construction and Building Materials, June 2021, Elsevier

    Professor Hossam El-Din Sallam

  38. Investigation on integrity assessment tests of WRB metal-polymer-metal composites

    Article • Archives of Civil and Mechanical Engineering, March 2021, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  39. Flexural behavior of functionally graded polymeric composite beams

    Article • Journal of Industrial Textiles, March 2021, SAGE Publications

    Professor Hossam El-Din Sallam

  40. Long-term behavior of normal weight concrete containing hybrid nanoparticles subjected to gamma radiation

    Article • Archives of Civil and Mechanical Engineering, January 2021, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  41. Tribological and Mechanical Properties of Epoxy Reinforced by Hybrid Nanoparticles

    Article • Latin American Journal of Solids and Structures, January 2021, FapUNIFESP (SciELO)

    Professor Hossam El-Din Sallam

  42. Mechanical Properties of Al/PU/Perforated CU/PU/Al Sandwich Composites

    Article • Materials Research, January 2021, FapUNIFESP (SciELO)

    Professor Hossam El-Din Sallam

  43. The Most Effective Index for Pavement Management of Urban Major Roads at a Network Level

    Article • Arabian Journal for Science and Engineering, November 2020, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  44. Progressive failure analysis of a hip joint based on extended finite element method

    Article • Engineering Failure Analysis, November 2020, Elsevier

    Professor Hossam El-Din Sallam

  45. Finite element analysis of the behavior of bonded composite patches repair in aircraft structures

    Article • Fracture and Structural Integrity, September 2020, Gruppo Italiano Frattura

    Professor Hossam El-Din Sallam

  46. Effects of composite patching on cyclic crack tip deformation of cracked pinned metallic joints

    Article • The Journal of Adhesion, August 2020, Taylor & Francis

    Professor Hossam El-Din Sallam

  47. Effect of Loading Rate and Pipe Wall Thickness on the Strength and Toughness of Welded and Unwelded Polyethylene Pipes

    Article • Journal of Pressure Vessel Technology, August 2020, ASME International

    Professor Hossam El-Din Sallam

  48. Deformation and load transfer analysis of staggered composite-steel lap joints subjected to progressive damage

    Article • Engineering Structures, July 2020, Elsevier

    Professor Hossam El-Din Sallam

  49. Investigation of fatigue crack propagation in steel pipeline repaired by glass fiber reinforced polymer

    Article • Composite Structures, June 2020, Elsevier

    Professor Hossam El-Din Sallam

  50. Effect of different parameters controlling the flexural behavior of RC beams strengthened with NSM using nonlinear finite element analysis

    Article • Fracture and Structural Integrity, May 2020, Gruppo Italiano Frattura

    Professor Hossam El-Din Sallam

  51. Experimental and numerical determination of critical osmotic blister size affecting the strength of aged FRP seawater pipe

    Article • Polymers and Polymer Composites, May 2020, SAGE Publications

    Professor Hossam El-Din Sallam

  52. Field-testing and numerical simulation of vantage steel bridge

    Article • Journal of Civil Structural Health Monitoring, March 2020, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  53. The influence of interaction between NSM and internal reinforcements on the structural behavior of upgrading RC beams

    Article • Composite Structures, February 2020, Elsevier

    Professor Hossam El-Din Sallam, Prof. Ibrahim Attia Sharaky

  54. Effects of tensile reinforcing steel ratio and Near-Surface-Mounted bar development length on the structural behavior of strengthened RC beams

    Article • Latin American Journal of Solids and Structures, January 2020, FapUNIFESP (SciELO)

    Professor Hossam El-Din Sallam

  55. Failure analysis of bolted joints

    Article • Advances in Structural Engineering, November 2019, SAGE Publications

    Professor Hossam El-Din Sallam

  56. Mechanical and Bond Behavior of an Advanced Quranic Metal-Matrix Composite Material (QMMC)

    Article • June 2019, ASME International

    Professor Hossam El-Din Sallam

  57. Effect of RAP content on flexural behavior and fracture toughness of flexible pavement

    Article • Latin American Journal of Solids and Structures, March 2019, FapUNIFESP (SciELO)

    Professor Hossam El-Din Sallam

  58. Prediction of failure stages for double lap joints using finite element analysis and artificial neural networks

    Article • Engineering Failure Analysis, March 2019, Elsevier

    Professor Hossam El-Din Sallam

  59. Mixed Mode Crack Growth in Functionally Graded Material Under Three-Point Bending

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Hossam El-Din Sallam

  60. Notch Tensile Strength of Carbon Fiber/Epoxy Composite Plate with a Center Hole under Static and Cyclic Loading

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Hossam El-Din Sallam

  61. Reliability study on fracture and fatigue behavior of pavement materials using SCB specimen

    Article • International Journal of Pavement Engineering, December 2018, Taylor & Francis

    Professor Hossam El-Din Sallam

  62. Structural behavior of hybrid CFRP/steel bolted staggered joints

    Article • Construction and Building Materials, November 2018, Elsevier

    Professor Hossam El-Din Sallam

  63. Effect of axial stiffness of NSM FRP reinforcement and concrete cover confinement on flexural behaviour of strengthened RC beams: Experimental and numerical study

    Article • Engineering Structures, October 2018, Elsevier

    Professor Hossam El-Din Sallam, Prof. Ibrahim Attia Sharaky

  64. The failure stages of bolted double-lap metallic joints: experimental study

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, July 2018, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  65. Structural Behavior of RC Beams Containing a Pre- Diagonal Tension Crack

    Article • Latin American Journal of Solids and Structures, July 2018, FapUNIFESP (SciELO)

    Professor Hossam El-Din Sallam

  66. Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines

    Article • Latin American Journal of Solids and Structures, July 2018, FapUNIFESP (SciELO)

    Professor Hossam El-Din Sallam

  67. Fatigue Crack Tip Plasticity for Inclined Cracks

    Article • International Journal of Steel Structures, April 2018, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  68. Peeling Prevention in Strengthened RC Beams Using End Cover Replacement

    Article • April 2018, American Society of Civil Engineers (ASCE)

    Professor Hossam El-Din Sallam

  69. Fracture behavior of roll bonded Al-brass-Al multilayer composites – Concept of the maximum undamaged defect size (d)

    Article • Procedia Structural Integrity, January 2018, Elsevier

    Professor Hossam El-Din Sallam

  70. Experimental and numerical study of RC beams strengthened with bottom and side NSM GFRP bars having different end conditions

    Article • Construction and Building Materials, September 2017, Elsevier

    Professor Hossam El-Din Sallam, Prof. Ibrahim Attia Sharaky

  71. Discussion of “Fatigue Behavior of Cracked Steel Plates Strengthened with Different CFRP Systems and Configurations” by Hai-Tao Wang, Gang Wu, and Jian-Biao Jiang

    Article • Journal of Composites for Construction, June 2017, American Society of Civil Engineers (ASCE)

    Professor Hossam El-Din Sallam

  72. Composite Patch Configuration and Prestress Effect on SIFs for Inclined Cracks in Steel Plates

    Article • Journal of Structural Engineering, May 2017, American Society of Civil Engineers (ASCE)

    Professor Hossam El-Din Sallam

  73. Failure Analysis of Composite Repaired Pipelines with an Inclined Crack under Static Internal Pressure

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Professor Hossam El-Din Sallam

  74. Mixed mode fracture behavior of concrete pavement containing RAP - 3D finite element analysis

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Professor Hossam El-Din Sallam

  75. Discussion: Mechanical properties of hybrid fibre-reinforced concrete – analytical modelling and experimental behaviour

    Article • Magazine of Concrete Research, November 2016, ICE Publishing

    Professor Hossam El-Din Sallam

  76. Composite Patch Configuration and Prestraining Effect on Crack Tip Deformation and Plastic Zone for Inclined Cracks

    Article • Journal of Composites for Construction, August 2016, American Society of Civil Engineers (ASCE)

    Professor Hossam El-Din Sallam

  77. Flexural behavior of RC beams strengthened by NSM GFRP Bars having different end conditions

    Article • Composite Structures, July 2016, Elsevier

    Professor Hossam El-Din Sallam, Prof. Ibrahim Attia Sharaky

  78. Effect of Poisson’s Ratio on Stress/Strain Concentration at Circular Holes in Elastic Plates Subjected to Biaxial Loading — Three Dimensional Finite Element Analysis

    Article • January 2016, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  79. Evaluation of Fracture Toughness Behavior of Polyethylene Pipe Materials1

    Article • Journal of Pressure Vessel Technology, December 2015, ASME International

    Professor Hossam El-Din Sallam

  80. Mode II Fracture Toughness of Hybrid FRCs

    Article • International Journal of Concrete Structures and Materials, November 2015, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  81. Crack sensitivity of bolted metallic and polymeric joints

    Article • Engineering Fracture Mechanics, October 2015, Elsevier

    Professor Hossam El-Din Sallam

  82. Wear and Corrosion Behavior of High-Cr White Cast Iron Alloys in Different Corrosive Media

    Article • Journal of Bio- and Tribo-Corrosion, August 2015, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  83. Validation of Linear Elastic Fracture Mechanics in Predicting the Fracture Toughness of Polyethylene Pipe Materials

    Article • July 2015, ASME International

    Professor Hossam El-Din Sallam

  84. Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips

    Article • Composite Structures, April 2015, Elsevier

    Professor Hossam El-Din Sallam, Prof. Ibrahim Attia Sharaky

  85. Locating the site of diagonal tension crack initiation and path in reinforced concrete beams

    Article • Ain Shams Engineering Journal, March 2015, Elsevier

    Professor Hossam El-Din Sallam

  86. Wear and Corrosion Behavior of Al–Si Matrix Composite Reinforced with Alumina

    Article • Journal of Bio- and Tribo-Corrosion, January 2015, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  87. Prediction of Crack Initiation Site in Fastener Hole of Composite Laminate

    Article • January 2015, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  88. Effect of strain rate, thickness, welding on the J–R curve for polyethylene pipe materials

    Article • Theoretical and Applied Fracture Mechanics, December 2014, Elsevier

    Professor Hossam El-Din Sallam

  89. Application of the Maximum Undamaged Defect Size (d max) Concept in Fiber-Reinforced Concrete Pavements

    Article • Arabian Journal for Science and Engineering, October 2014, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  90. Evaluation of Fracture Toughness Behavior of Polyethylene Pipe Materials

    Article • July 2014, ASME International

    Professor Hossam El-Din Sallam

  91. Limit Load Determination and Material Characterization of Cracked Polyethylene Miter Pipe Bends1

    Article • Journal of Pressure Vessel Technology, April 2014, ASME International

    Professor Hossam El-Din Sallam

  92. Efficient 3D modeling of damage in composite materials

    Article • Journal of Composite Materials, March 2014, SAGE Publications

    Professor Hossam El-Din Sallam

  93. Effect of Load Angle on Limit Load of Polyethylene Miter Pipe Bends1

    Article • Journal of Pressure Vessel Technology, February 2014, ASME International

    Professor Hossam El-Din Sallam

  94. Behaviors of a cracked lapped joint under mixed mode loading

    Article • Engineering Failure Analysis, January 2014, Elsevier

    Professor Hossam El-Din Sallam

  95. Failure analysis and flexural behavior of high chromium white cast iron and AISI4140 Steel bimetal beams

    Article • Materials & Design (1980-2015), December 2013, Elsevier

    Professor Hossam El-Din Sallam

  96. Plastic Load of Precracked Polyethylene Miter Pipe Bends Subjected to In-Plane Bending Moment1

    Article • Journal of Pressure Vessel Technology, October 2013, ASME International

    Professor Hossam El-Din Sallam

  97. Flexural Strength and Toughness of Austenitic Stainless Steel Reinforced High-Cr White Cast Iron Composite

    Article • Journal of Materials Engineering and Performance, August 2013, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  98. Mechanical Behavior of Welded and Un-Welded Polyethylene Pipe Materials

    Article • July 2013, ASME International

    Professor Hossam El-Din Sallam

  99. Fracture energy of hybrid polypropylene–steel fiber high strength concrete

    Article • June 2012, WITPRESS LTD.

    Professor Hossam El-Din Sallam

  100. Effect of clamping force and friction coefficient on stress intensity factor of cracked lapped joints

    Article • Engineering Failure Analysis, September 2011, Elsevier

    Professor Hossam El-Din Sallam

  101. Limit Load Determination and Material Characterization of Cracked Polyethylene Miter Pipe Bends

    Article • January 2011, ASME International

    Professor Hossam El-Din Sallam

  102. Flexural behavior of strengthened steel–concrete composite beams by various plating methods

    Article • Journal of Constructional Steel Research, August 2010, Elsevier

    Professor Hossam El-Din Sallam

  103. Flexural behavior of steel beams strengthened by carbon fiber reinforced polymer plates – Three dimensional finite element simulation

    Article • Materials & Design (1980-2015), March 2010, Elsevier

    Professor Hossam El-Din Sallam, Prof. Ibrahim Attia Sharaky

  104. Discussion of “Flexural Strengthening of Steel Bridges with High Modulus CFRP Strips” by David Schnerch and Sami Rizkalla

    Article • Journal of Bridge Engineering, January 2010, American Society of Civil Engineers (ASCE)

    Professor Hossam El-Din Sallam

  105. Effect of Load Angle on Limit Load of Polyethylene Miter Pipe Bends

    Article • January 2010, ASME International

    Professor Hossam El-Din Sallam

  106. Limit Load of Pre-Cracked Polyethylene Miter Pipe Bends Subjected to In-Plane Bending Moment

    Article • January 2010, ASME International

    Professor Hossam El-Din Sallam

  107. 3-D Finite Element Analysis of Transient Heat Transfer and Thermal Stress in a Crowned Mandibular First Molar Tooth

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Hossam El-Din Sallam

  108. Evaluation of Steel I-Beams Strengthened by Various Plating Methods

    Article • Advances in Structural Engineering, August 2006, SAGE Publications

    Professor Hossam El-Din Sallam

  109. Effect of washer size and tightening torque on the performance of bolted joints in composite structures

    Article • Composite Structures, June 2006, Elsevier

    Professor Hossam El-Din Sallam

  110. Stress intensity factors of a central slant crack with frictional surfaces in plates with biaxial loading

    Article • International Journal of Fracture, September 2004, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  111. Mode I notch fatigue crack growth behaviour under constant amplitude loading and due to the application of a single tensile overload

    Article • International Journal of Fatigue, February 2004, Elsevier

    Professor Hossam El-Din Sallam

  112. Significance of crack tip plasticity to early notch fatigue crack growth

    Article • International Journal of Fatigue, February 2004, Elsevier

    Professor Hossam El-Din Sallam

  113. Prevention of Peeling Failure in Plated Beams

    Article • Journal of Advanced Concrete Technology, January 2004, Japan Concrete Institute

    Professor Hossam El-Din Sallam

  114. Simulation of mixed mode I/II cyclic deformation at the tip of a short kinked inclined crack with frictional surfaces

    Article • International Journal of Fatigue, August 2003, Elsevier

    Professor Hossam El-Din Sallam

  115. Finite element simulation of the mechanics of flat contact pad fretting fatigue tests

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2003, Wiley

    Professor Hossam El-Din Sallam

  116. Stress intensity factors of a shortly kinked slant central crack with frictional surfaces in uniaxially loaded plates

    Article • International Journal of Fatigue, April 2003, Elsevier

    Professor Hossam El-Din Sallam

  117. Mode II stress intensity factors for central slant cracks with frictional surfaces in uniaxially compressed plates

    Article • International Journal of Fatigue, December 2002, Elsevier

    Professor Hossam El-Din Sallam

  118. The effect of alkali-silica-reaction on the fatigue behaviour of plain concrete tested in compression, indirect tension and flexure

    Article • Magazine of Concrete Research, October 2001, ICE Publishing

    Professor Hossam El-Din Sallam

  119. Discussion: The effect of alkali-silica-reaction on the fatigue behaviour of plain concrete tested in compression, indirect tension and flexure

    Article • Magazine of Concrete Research, October 2001, ICE Publishing

    Professor Hossam El-Din Sallam

  120. Deformation behaviour at the tip of a physically short fatigue crack due to a single overload

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 1999, Wiley

    Professor Hossam El-Din Sallam

  121. FATIGUE CRACK GROWTH DUE TO TWO SUCCESSIVE SINGLE OVERLOADS

    Article • Fatigue & Fracture of Engineering Materials & Structures, December 1998, Wiley

    Professor Hossam El-Din Sallam

  122. The effects of matrix and fiber properties on the mechanical behavior and acoustic emission in continuous fiber reinforced metal matrix composites

    Article • Materials Science and Engineering A, June 1998, Elsevier

    Professor Hossam El-Din Sallam

  123. The effect of pH on the mechanism of corrosion and stress corrosion and degradation of mechanical properties of AA6061 and Nextel 440 fiber-reinforced AA6061 composite

    Article • Corrosion Science, February 1998, Elsevier

    Professor Hossam El-Din Sallam

  124. FRONT DEVELOPMENT OF A LONG FATIGUE CRACK DURING ITS GROWTH

    Article • Fatigue & Fracture of Engineering Materials & Structures, June 1997, Wiley

    Professor Hossam El-Din Sallam

  125. Effect of rest time after application of single overload cycle on fatigue life

    Article • Engineering Fracture Mechanics, April 1997, Elsevier

    Professor Hossam El-Din Sallam

  126. Article • Journal of Materials Science, January 1997, Springer Science + Business Media

    Professor Hossam El-Din Sallam

  127. DISCUSSION ON THE PAPER EFFECT OF A SINGLE PEAK OVERLOAD ON PHYSICALLY SHORT FATIGUE CRACK RETARDATION IN AN AXLE-STEEL, BY Z. CHANGQING, J. YUCHENG AND Y. GUANGLI DISCUSSION BY

    Article • Fatigue & Fracture of Engineering Materials & Structures, August 1996, Wiley

    Professor Hossam El-Din Sallam

  128. Effect of rest time after application of single overload cycle on fatigue life

    Article • Engineering Fracture Mechanics, May 1996, Elsevier

    Professor Hossam El-Din Sallam

  129. CORRELATION OF FATIGUE CRACK GROWTH BY CRACK TIP DEFORMATION BEHAVIOUR

    Article • Fatigue & Fracture of Engineering Materials & Structures, January 1995, Wiley

    Professor Hossam El-Din Sallam

  130. 3-D finite element analysis of cyclic deformation at the front of a stationary crack

    Article • January 1995, Elsevier

    Professor Hossam El-Din Sallam