All Stories

  1. Estimation of thermal properties and boundary heat transfer coefficient of the ground with a Bayesian technique
  2. An inverse parameter estimation problem to recover temperatures in regions affected by the device artifact in magnetic resonance thermometry
  3. A Subvoxel Correction of Boiling‐Induced Susceptibility Artifacts in Magnetic Resonance Thermometry and Dosimetry for Monitoring Microwave Thermoablation: A Feasibility Study in a Swine Model
  4. A combined Physics-informed neural network and particle filter approach to solve a state estimation problem during the heating of a nanofluid
  5. Combined application of particle filters for model predictive control during the systemic hypothermia treatment of the hypoxic-ischemic encephalopathy
  6. Inverse Problem of Parameter Estimation in Natural Convection of an Iron Oxide—Distilled Water Nanofluid
  7. Inverse heat transfer problem for the characterization of nanofluids produced with different types of palladium nanoparticles
  8. Estimation of the brain temperature during the hypothermia treatment of hypoxic ischemic encephalopathy in newborns
  9. Professor Jean-François Sacadura 60 Years Dedicated to Thermal Science and Engineering
  10. Sequential estimation of high temperatures of liquid metals by using particle filter methods
  11. Estimation of ground thermal diffusivity using the conjugate gradient method with adjoint problem formulation
  12. Multiple Inversion Techniques with Multispectral Pyrometry for the Estimation of Temperature and Emissivity of Liquid Niobium and 100c6 Steel
  13. Parameter estimation with the Markov Chain Monte Carlo method aided by evolutionary neural networks in a water hammer model
  14. EDITORIAL: Renato Machado Cotta receives the 2022 Luikov medal
  15. Design Under Uncertainties of the Thermal Ablation Treatment of Skin Cancer
  16. Kalman filter temperature estimation with a photoacoustic observation model during the hyperthermia treatment of cancer
  17. Thermal ablation effects on rotors that characterize functional re‐entry cardiac arrhythmia
  18. An inverse analysis of the brain cooling process in neonates using the particle filter method
  19. Simultaneous estimation of temperature and emissivity of metals around their melting points by deterministic and Bayesian techniques
  20. Sequential Estimation of the Radial Temperature Variation in Overhead Power Cables
  21. Monte Carlo parameter estimation and direct simulation of in vitro hyperthermia-chemotherapy experiment
  22. Computational model of silica nanoparticle penetration into tumor spheroids: Effects of methoxy and carboxy PEG surface functionalization and hyperthermia
  23. State estimation problem for the detection of valve closure in gas pipelines
  24. Sequential estimation of creatinine removal by a haemodialyser
  25. In Memoriam Professor Ismail Hakki Tavman
  26. Thermophysical characterization of materials at high temperatures by solving inverse problems within the Bayesian framework of statistics
  27. Synthesis, characterization and photothermal analysis of nanostructured hydrides of Pd and PdCeO2
  28. Parameter estimation and model selection for water sorption in a wood fibre material
  29. A Bayesian approach for neutral particles source estimation
  30. Nondestructive, real time technique for in-plane heat diffusivity measurements
  31. Estimation Of State Variables And Model Parameters For The Evolution Of COVID-19 In The City Of Rio de Janeiro
  32. Approximate Bayesian computation applied to the identification of thermal damage of biological tissues due to laser irradiation
  33. Real-time temperature estimation with enhanced spatial resolution during MR-guided hyperthermia therapy
  34. George S. Dulikravich on his 70th Birthday
  35. Temperature estimation of inflamed bowel by the photoacoustic inverse approach
  36. Thermal Characterization of Ex Vivo Tissue
  37. A Bayesian approach for the estimation of the thermal diffusivity of aerodynamically levitated solid metals at high temperatures
  38. Thermal Effect by Applying Laser Heating in Iron Oxide Nanoparticles Dissolved in Distilled Water
  39. Coupled POD-Bayesian estimation of the parameters of mathematical model of the packed-bed drying of cherry stones
  40. Estimation of the kidney metabolic heat generation rate
  41. Computational fluid dynamic analysis of physical forces playing a role in brain organoid cultures in two different multiplex platforms
  42. Simultaneous Model Selection and Model Calibration for the Proliferation of Tumor and Normal Cells During In Vitro Chemotherapy Experiments
  43. Thermal conductivity of heavy, even-carbon number n-alkanes (C22 to C32)
  44. Detection of contact failures with the Markov chain Monte Carlo method by using integral transformed measurements
  45. Estimation of the temperature field in laser-induced hyperthermia experiments with a phantom
  46. Application of the photoacoustic technique for temperature measurements during hyperthermia
  47. Computational fluid dynamic analysis reveals the underlying physical forces playing a role in 3D multiplex brain organoid cultures
  48. Thermal damage during ablation of biological tissues
  49. Erratum to ‘Reconstruction of thermal conductivity and heat capacity using a tomographic approach’ [Int. J. Heat Mass Transfer 51(7–8) (2008) 1866–1876]
  50. Estimation of parameters of the dual-phase-lag model for heat conduction in metal-oxide-semiconductor field-effect transistors
  51. State estimation problems in PRF-shift magnetic resonance thermometry
  52. EXPERIMENTAL ESTIMATION OF A HEAT FLUX IMPOSED BY A LASER DIODE WITH THE STEADY STATE KALMAN FILTER
  53. INTERNAL TEMPERATURE FIELD ESTIMATION IN WATER-FILTERED INFRA-RED-A (wIRA) HYPERTHERMIA OF BREAST CANCER FROM SKIN SURFACE TEMPERATURE MEASUREMENTS
  54. MAGNETIC RESONANCE THERMOMETRY DURING THE LOCALIZED HEATING OF BIOLOGICAL TISSUES
  55. Finite Difference Methods in Heat Transfer, Second Edition
  56. Model selection and parameter estimation in tumor growth models using approximate Bayesian computation-ABC
  57. Thermal tomography utilizing truncated Fourier series approximation of the heat diffusion equation
  58. State estimation in bioheat transfer: a comparison of particle filter algorithms
  59. Estimation of the non-linear diffusion coefficient with Marcov Chain Monte Carlo method based on the integral information
  60. Inverse Photoacoustic Technique for Parameter and Temperature Estimation in Tissues
  61. Bayesian estimate of pre-mixed and diffusive rate of heat release phases in marine diesel engines
  62. Multi-Objective Optimization of Micro Pin-Fin Arrays for Cooling of High Heat Flux Electronics with a Hot Spot
  63. Particle Filter and Approximation Error Model for State Estimation in Hyperthermia
  64. An analytical method to estimate spatially-varying thermal contact conductances using the reciprocity functional and the integral transform methods: Theory and experimental validation
  65. Bayesian inference for estimating thermal properties of a historic building wall
  66. Combined Parameter and State Estimation Problem in a Complex Domain: RF Hyperthermia Treatment Using Nanoparticles
  67. Combined parameter and state estimation in the radio frequency hyperthermia treatment of cancer
  68. Real-time identification of a high-magnitude boundary heat flux on a plate
  69. Inverse problem in the hyperthermia therapy of cancer with laser heating and plasmonic nanoparticles
  70. Numerical simulation of nanoparticles assisted laser photothermal therapy: a comparison of the P1-approximation and discrete ordinate methods
  71. Thermography detection of contact failures in double layered materials using the reciprocity functional approach
  72. Proper Generalized Decomposition model reduction in the Bayesian framework for solving inverse heat transfer problems
  73. Thermal analysis of anti-icing systems in aeronautical velocity sensors and structures
  74. Inverse determination of spatially varying material coefficients in solid objects
  75. Bayesian estimation of the hydraulic and solute transport properties of a small-scale unsaturated soil column
  76. Estimation of state variables in the hyperthermia therapy of cancer with heating imposed by radiofrequency electromagnetic waves
  77. Multi-Objective Optimization of Micro Pin-Fin Arrays for Cooling of High Heat Flux Electronics With a Hot Spot
  78. Estimation of Tumor Size Evolution Using Particle Filters
  79. Estimation of a Location- and Time-Dependent High-Magnitude Heat Flux in a Heat Conduction Problem Using the Kalman Filter and the Approximation Error Model
  80. Selected Papers From the 14th Brazilian Congress of Thermal Sciences and Engineering—ENCIT 2012
  81. Bayesian approach to the inverse problem in a light scattering application
  82. 3D thermal tomography with experimental measurement data
  83. Bayesian estimate of mass fraction of burned fuel in internal combustion engines using pressure measurements
  84. Identification of Contact Failures in Multilayered Composites With the Markov Chain Monte Carlo Method
  85. Transient non-intrusive method for estimating spatial thermal contact conductance by means of the reciprocity functional approach and the method of fundamental solutions
  86. A statistical inversion approach for local thermal diffusivity and heat flux simultaneous estimation
  87. ESTIMATION OF THE CONVECTIVE HEAT TRANSFER COEFFICIENT IN PIPELINES WITH THE MARKOV CHAIN MONTE CARLO METHOD
  88. A COMPARISON OF THE ITERATIVE REGULARIZATION TECHNIQUE AND OF THE MARKOV CHAIN MONTE CARLO METHOD: ESTIMATION OF THE SOURCE TERM IN A THREE-DIMENSIONAL HEAT CONDUCTION PROBLEM
  89. State Estimation Problem in the Hyperthermia Treatment of Tumors Loaded with Nanoparticles
  90. A Non-Intrusive Inverse Problem Technique for the Identification of Contact Failures in Double-Layered Composites
  91. Thermal Tomography Using Experimental Measurement Data
  92. Accelerated Bayesian Inference for the Estimation of Spatially Varying Heat Flux in a Heat Conduction Problem
  93. Selected Papers from the Thirteenth Brazilian Congress of Thermal Sciences and Engineering—ENCIT 2010
  94. Pipeline Heating Method Based on Optimal Control and State Estimation
  95. Fabrication Methods of Phantoms Simulating Optical and Thermal Properties
  96. Experimental Identification of Thermophysical Properties in Heterogeneous Materials with Integral Transformation of Temperature Measurements from Infrared Thermography
  97. Inverse Problems in Aerodynamics, Heat Transfer, Elasticity and Materials Design
  98. Theoretical–experimental analysis of heat transfer in nonhomogeneous solids via improved lumped formulation, integral transforms and infrared thermography
  99. Simultaneous estimation of spatially distributed thermal conductivity, heat capacity and surface heat transfer coefficient in thermal tomography
  100. Foreword
  101. Estimation of position-dependent transient heat source with the Kalman filter
  102. Global estimation of thermal parameters from a picoseconds thermoreflectometry experiment
  103. Space-variable thermophysical properties identification in nanocomposites via integral transforms, Bayesian inference and infrared thermography
  104. Thermal-Diffusivity Measurements of Conductive Composites Based on EVA Copolymer Filled With Expanded and Unexpanded Graphite
  105. Fast Bayesian inference for an inverse heat transfer problem using approximations
  106. Size distribution of nanoparticles by dynamic light scattering. Comparison of Bayesian and Tikhonov inversion methods
  107. Inverse Problems in Heat Transfer: New Trends on Solution Methodologies and Applications
  108. Application of Two Bayesian Filters to Estimate Unknown Heat Fluxes in a Natural Convection Problem
  109. STATE ESTIMATION PROBLEMS IN HEAT TRANSFER
  110. Bayesian estimation of thermophysical parameters of thin metal films heated by fast laser pulses
  111. Inverse Heat Transfer Problems
  112. A Bayesian inversion method for estimating the particle size distribution of latexes from multiangle dynamic light scattering measurements
  113. Inverse analysis with integral transformed temperature fields: Identification of thermophysical properties in heterogeneous media
  114. Combining Integral Transforms and Bayesian Inference in the Simultaneous Identification of Variable Thermal Conductivity and Thermal Capacity in Heterogeneous Media
  115. Application of a Bayesian Filter to Estimate Unknown Heat Fluxes in a Natural Convection Problem
  116. Identification of Contact Failures in Multi-Layered Composites
  117. An Analysis of Heat Conduction Models for Nanofluids
  118. Nodal predictive error model and Bayesian approach for thermal diffusivity and heat source mapping
  119. Inverse analysis of forced convection in micro-channels with slip flow via integral transforms and Bayesian inference
  120. Bayesian Estimation of Temperature-Dependent Thermophysical Properties and Transient Boundary Heat Flux
  121. Integral Transforms and Bayesian Inference in the Identification of Variable Thermal Conductivity in Two-Phase Dispersed Systems
  122. Inverse Problems in Heat Transfer: New Trends on Solution Methodologies and Applications
  123. Direct and Inverse Problems Solutions in Micro-Scale Forced Convection
  124. Temperature Field Prediction of a Multilayered Composite Pipeline Based on the Particle Filter Method
  125. Integral Transforms, Bayesian Inference, and Infrared Thermography in the Simultaneous Identification of Variable Thermal Conductivity and Diffusivity in Heterogeneous Media
  126. Foreword
  127. Magnetohydrodynamic simulations using radial basis functions
  128. Eigenfunction expansions for transient diffusion in heterogeneous media
  129. Professor Emeritus M. Necati Özisik 1923–2008
  130. Selected Papers from the Eleventh Brazilian Congress of Thermal Sciences and Engineering—ENCIT 2006
  131. Foreword
  132. HEAT TRANSFER ENHANCEMENT IN LAMINAR FORCED CONVECTION: NANOFLUIDS, MICROCHANNELS, STRUCTURED SURFACES
  133. BAYESIAN ESTIMATION OF HYDRAULIC AND SOLUTE TRANSPORT PARAMETERS FROM LABORATORY SOIL COLUMN EXPERIMENTS
  134. Foreword
  135. Foreword
  136. Interaction Effects During Combustion of Linear Arrays of Gaseous Fuel Pockets
  137. Bayesian approach for thermal diffusivity mapping from infrared images with spatially random heat pulse heating
  138. WITHDRAWN: Reconstruction of thermal conductivity and heat capacity using a tomographic approach
  139. INVERSE PROBLEM ANALYSIS FOR HEAT FLUX ESTIMATION IN CONJUGATED CONDUCTION-EXTERNAL CONVECTION
  140. Integral Transform Solutions for Diffusion in Heterogeneous Media
  141. Recovering the source term in a linear diffusion problem by the method of fundamental solutions
  142. Approximation of the likelihood function in the Bayesian technique for the solution of inverse problems
  143. Foreword
  144. Reconstruction of thermal conductivity and heat capacity using a tomographic approach
  145. Identification and design of source term in a two-region heat conduction problem
  146. Improved lumped-differential formulations and hybrid solution methods for drying in porous media
  147. Selected Papers from the 10th Brazilian Congress of Thermal Sciences and Engineering‐ENCIT 2004
  148. Identification of atmospheric boundary layer parameters by inverse problem
  149. Inverse Approaches to Drying of Thin Bodies With Significant Shrinkage Effects
  150. Simultaneous estimation of the spacewise and timewise variations of mass and heat transfer coefficients in drying
  151. Foreword
  152. Coupled conduction–radiation in semi-transparent materials at high temperatures
  153. Foreword
  154. Foreword
  155. Inverse and optimization problems in heat transfer
  156. IDENTIFICATION OF THE THERMOPHYSICAL PROPERTIES OF SEMI-TRANSPARENT MATERIALS
  157. Measurement of thermophysical properties of ceramics by the flash method
  158. Estimation of thermophysical properties of moist materials under different drying conditions
  159. Selected Papers from the 9th Brazilian Congress of Thermal Sciences and Engineering—ENCIT 2002
  160. Identification of Heat Flux Imposed by an Oxyacetylene Torch
  161. Simultaneous estimation of spatially dependent diffusion coefficient and source term in a nonlinear 1D diffusion problem
  162. Foreword
  163. Inverse natural convection problem of simultaneous estimation of two boundary heat fluxes in irregular cavities
  164. Foreword
  165. Foreword
  166. Simultaneous estimation of spatially-dependent mass and heat transfer coefficients of drying bodies
  167. Analysis of Different Kinds of Measurements on the Estimation of Time Dependent Mass and Heat Transfer Coefficients in Drying
  168. Use of a single heated surface for the estimation of thermal conductivity components of orthotropic 3D solids
  169. Estimation of the heat flux at the surface of ablating materials by using temperature and surface position measurements
  170. Foreword
  171. A nonlinear inverse problem in simultaneously estimating the heat and mass production rates for a chemically reacting fluid
  172. Hybrid Approaches in Heat & Mass Transfer: A Brazilian Experience with Applications in National Strategic Projects
  173. Foreword
  174. An inverse problem of parameter estimation for heat and mass transfer in capillary porous media
  175. Effects of the Heating Process and Body Dimensions on the Estimation of the Thermal Conductivity Components of Orthotropic Solids
  176. A Comparison of Two Solution Techniques for the Inverse Problem of Simultaneously Estimating the Spatial Variations of Diffusion Coefficients and Source Terms
  177. Estimation of dimensionless parameters of Luikov's system for heat and mass transfer in capillary porous media
  178. Estimation of the Heat Flux at the Surface of Ablating Materials
  179. Estimation of Thermal Properties of Ablating Materials
  180. Effects of Lateral Heat Losses on the Parameter Estimation Problem in Moist Capillary Porous Media
  181. A comparison of concentration measurement techniques for the estimation of the apparent mass diffusion coefficient
  182. INVERSE FORCED CONVECTION PROBLEM OF SIMULTANEOUS ESTIMATION OF TWO BOUNDARY HEAT FLUXES IN IRREGULARLY SHAPED CHANNELS
  183. INVERSE FORCED CONVECTION PROBLEM OF SIMULTANEOUS ESTIMATION OF TWO BOUNDARY HEAT FLUXES IN IRREGULARLY SHAPED CHANNELS
  184. Inverse convection problem of simultaneous estimation of two boundary heat fluxes in parallel plate channels
  185. A HYBRID NUMERICAL-ANALYTICAL METHOD FOR THE SOLUTION OF THREE-DIMENSIONAL TRANSIENT DIFFUSION PROBLEMS IN PRISMS
  186. Estimation of the Boundary Heat Flux in Grinding via the Conjugate Gradient Method
  187. Parameter estimation in moist capillary porous media by using temperature measurements
  188. A function estimation approach for the identification of the transient inlet profile in parallel plate channels
  189. A solution via generalised intergral transform technique for the simultaneous transport processes during combustion of wood cylinders
  190. COMPARISON OF DIFFERENT VERSIONS OF THE CONJUGATE GRADIENT METHOD OF FUNCTION ESTIMATION
  191. Local-instantaneous filtering in the integral transform solution of nonlinear diffusion problems
  192. DESIGN OF OPTIMUM EXPERIMENTS FOR THE ESTIMATION OF THE THERMAL CONDUCTIVITY COMPONENTS OF ORTHOTROPIC SOLIDS
  193. On the reduction of computational costs in eigenfunction expansions of multidimensional diffusion problems
  194. Inverse analysis for estimating the timewise and spacewise variation of the wall heat flux in a parallel plate channel
  195. IMPROVED APPROXIMATE FORMULATIONS FOR ANISOTROPIC HEAT CONDUCTION
  196. A function estimation approach for determining temperature-dependent thermophysical properties
  197. ESTIMATION OF THE TIMEWISE AND SPACEWISE VARIATION OF THE WALL HEAT FLUX TO A NON-NEWTONIAN FLUID IN A PARALLEL PLATE CHANNEL
  198. Inverse analysis for estimating the electron-phonon coupling factor in thin metal films
  199. Transient Thermal Constriction Resistance in a Finite Heat Flux Tube
  200. Erratum: “Determination of the Reaction Function in a Reaction-Diffusion Parabolic Problem” (Journal of Heat Transfer, 1994, 116, pp. 1041–1044)
  201. Determination of the Reaction Function in a Reaction-Diffusion Parabolic Problem
  202. Inverse problem of estimating interface conductance between periodically contacting surfaces
  203. Inverse Engineering
  204. Inverse Engineering
  205. Computation of Sensitivity Coefficients and Estimation of Thermophysical Properties with the Line Heat Source Method
  206. Thermophysical Properties of Different Samples of Tissue-Mimicking Materials for Ultrasound Hyperthermia Phantoms