All Stories

  1. Direct ink writing of AZS refractories: Dimensional accuracy and corrosion in molten glass

    Article • Materials Letters, October 2026, Elsevier

    Gianpaolo Savio

  2. A Systematic Methodology for Design in Multi-Material Additive Manufacturing Derived by a Reverse-Traced Workflow

    Article • Eng—Advances in Engineering, January 2026, MDPI AG

    Gianpaolo Savio

  3. Lattice materials for additive manufacturing: geometric modeling and representation

    Article • January 2026, Elsevier

    Gianpaolo Savio

  4. Development of functionally graded properties components via filament foaming in material extrusion

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), September 2025, Springer Science + Business Media

    Gianpaolo Savio

  5. Design and Characterization of Negative-Stiffness Lattice Structures for Diabetic Midsoles

    Article • Applied Sciences, August 2025, MDPI AG

    Gianpaolo Savio

  6. Design and Characterization of Negative Stiffness Lattice Structures for Diabetic Midsoles

    Article • August 2025, MDPI AG

    Gianpaolo Savio

  7. On the direct design of future open cells foams for thermal science application

    Article • International Journal of Thermofluids, July 2025, Elsevier

    Gianpaolo Savio

  8. Computed Tomography-Driven Design and Fused Filament Fabrication of Graded Density Bone Scaffolds

    Article • Applied Sciences, June 2025, MDPI AG

    Gianpaolo Savio

  9. A Design Method for Graded Density Components by Polylactic Acid Foaming via Material Extrusion

    Article • January 2025, Springer Science + Business Media

    Gianpaolo Savio

  10. A Methodological Approach for the Evaluation of Deformations in Additively Manufactured Lattice Structures

    Article • January 2025, Springer Science + Business Media

    Gianpaolo Savio

  11. Challenges in the Selection of New Product Development Models for SMEs

    Article • January 2025, Springer Science + Business Media

    Gianpaolo Savio

  12. Shape Memory Waterbomb Origami by Polylactic Acid Fused Filament Fabrication for Biomedical Devices

    Article • January 2025, Springer Science + Business Media

    Gianpaolo Savio

  13. Three-dimensional automated measurements of femoral angles for the preoperative planning in dogs with patellar luxation

    Article • Frontiers in Veterinary Science, November 2024, Frontiers

    Gianpaolo Savio

  14. Electrolyte Gradients and Capacity Drop in Large Flow Battery Tanks: From Experiments to Fluid-Dynamic Investigations

    Article • ECS Meeting Abstracts, August 2024, The Electrochemical Society

    Gianpaolo Savio

  15. A Bioinspired Geometric Modeling Approach Based on Curve Differential Growth

    Article • January 2024, Springer Science + Business Media

    Gianpaolo Savio

  16. Representative Volume Element Analysis in Material Coextrusion

    Article • January 2024, Springer Science + Business Media

    Gianpaolo Savio

  17. Microstructure, distortion and residual stress investigation in a bio-inspired welding pattern

    Article • Procedia Structural Integrity, January 2024, Elsevier

    Gianpaolo Savio

  18. Masked stereolithography of wollastonite-diopside glass-ceramics from novel silicone-based liquid feedstock

    Article • Open Ceramics, December 2023, Elsevier

    Gianpaolo Savio

  19. Multi-Material Additive Manufacturing: Creating IN718-AISI 316L Bimetallic Parts by 3D Printing, Debinding, and Sintering

    Article • Sustainability, August 2023, MDPI AG

    Gianpaolo Savio

  20. Coupling of multilayer CAD-CAM prosthetic components: Computing the user interaction influence on the adhesion interface geometry

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), July 2023, Springer Science + Business Media

    Gianpaolo Savio

  21. High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering

    Article • Fracture and Structural Integrity, June 2023, Gruppo Italiano Frattura

    Gianpaolo Savio

  22. Functionally Graded Additive Manufacturing: Bridging the Gap between Design and Material Extrusion

    Article • Applied Sciences, January 2023, MDPI AG

    Gianpaolo Savio

  23. Modeling Materials Coextrusion in Polymers Additive Manufacturing

    Article • Materials, January 2023, MDPI AG

    Gianpaolo Savio

  24. Creating IN718-High Carbon Steel bi-metallic parts by Fused Deposition Modeling and Sintering

    Article • Procedia Structural Integrity, January 2023, Elsevier

    Gianpaolo Savio

  25. Engineering of silicone-based blends for the masked stereolithography of biosilicate/carbon composite scaffolds

    Article • Journal of the European Ceramic Society, October 2022, Elsevier

    Gianpaolo Savio

  26. A novel low-cost visual ear tag based identification system for precision beef cattle livestock farming

    Article • Information Processing in Agriculture, October 2022, Elsevier

    Gianpaolo Savio

  27. A Design Method for Custom Functionally Graded Lattice Orthoses

    Article • September 2022, Springer Science + Business Media

    Gianpaolo Savio

  28. Automatic Segmentation of Stomach of Patients Affected by Obesity

    Article • September 2022, Springer Science + Business Media

    Gianpaolo Savio, Alice Berardo

  29. Geometric Modeling of Lattice Structures with Selectively Activated Walls for Hydraulic Manifolds

    Article • September 2022, Springer Science + Business Media

    Gianpaolo Savio

  30. Image-Driven Manufacturing of Graded Lattices by Fused Deposition Modeling

    Article • September 2022, Springer Science + Business Media

    Gianpaolo Savio

  31. Design and manufacturing of graded density components by material extrusion technologies

    Article • Additive Manufacturing, September 2022, Elsevier

    Gianpaolo Savio

  32. Direct ink writing of silicone/filler mixtures for sphene scaffolds with advanced topologies

    Article • International Journal of Applied Ceramic Technology, August 2022, Wiley

    Gianpaolo Savio

  33. Investigation of the Accuracy of Four Intraoral Scanners in Mandibular Full-Arch Digital Implant Impression: A Comparative In Vitro Study

    Article • International Journal of Environmental Research and Public Health, April 2022, MDPI AG

    Gianpaolo Savio

  34. Metallurgical Characterization of Co-Cr-Mo Parts Processed by a Hybrid Manufacturing Technology

    Article • Physical Mesomechanics, March 2022, Pleiades Publishing Ltd

    Gianpaolo Savio

  35. Evaluation of the Fatigue Strength of a CAD-CAM Nanoceramic Resin Crown on Titanium and Zirconia-Titanium Abutments

    Article • Applied Sciences, January 2022, MDPI AG

    Gianpaolo Savio

  36. 3D Printing of Hierarchically Porous Lattice Structures Based on Åkermanite Glass Microspheres and Reactive Silicone Binder

    Article • Journal of Functional Biomaterials, January 2022, MDPI AG

    Gianpaolo Savio

  37. Analysis of a Preliminary Design Approach for Conformal Lattice Structures

    Article • Applied Sciences, December 2021, MDPI AG

    Gianpaolo Savio

  38. Conformal Lattice Structures: Modeling and Optimization

    Article • December 2021, Springer Science + Business Media

    Gianpaolo Savio

  39. Heterogeneous Materials Additive Manufacturing: An Overview

    Article • December 2021, Springer Science + Business Media

    Gianpaolo Savio

  40. Experimental pressure drops during the water flow into porous materials realized via additive manufacturing

    Article • Journal of Physics Conference Series, November 2021, Institute of Physics Publishing

    Gianpaolo Savio

  41. Digital Planning and Manufacturing of Maxillary Skeletal Expander for Patients with Thin Palatal Bone

    Article • Medical Devices Evidence and Research, October 2021, Taylor & Francis

    Gianpaolo Savio

  42. Up-Cycling of LCD Glass by Additive Manufacturing of Porous Translucent Glass Scaffolds

    Article • Materials, September 2021, MDPI AG

    Gianpaolo Savio

  43. Alkali‐free processing of advanced open‐celled sinter‐crystallized glass‐ceramics

    Article • International Journal of Applied Glass Science, May 2021, Wiley

    Gianpaolo Savio

  44. An Optimization Workflow in Design for Additive Manufacturing

    Article • Applied Sciences, March 2021, MDPI AG

    Gianpaolo Savio

  45. Digital Workflow for 3D Design and Additive Manufacturing of a New Miniscrew-Supported Appliance for Orthodontic Tooth Movement

    Article • Applied Sciences, January 2021, MDPI AG

    Gianpaolo Savio

  46. Trends in additively manufactured microfluidics, microreactors and catalytic materials

    Article • Materials Advances, January 2021, Royal Society of Chemistry

    Gianpaolo Savio

  47. Influence Of Three Different Scanning Techniques In Full-Arch Implants Digital Impression Using Intraoral Scanners: A Randomized Controlled Cross-Over Trial

    Article • EURAS Journal of Health, January 2021, Istanbul Aydin University

    Gianpaolo Savio

  48. Modeling Symmetric Minimal Surfaces by Mesh Subdivision

    Article • January 2021, Springer Science + Business Media

    Gianpaolo Savio

  49. In-depth comparison of polyamide 12 parts manufactured by Multi Jet Fusion and Selective Laser Sintering

    Article • Additive Manufacturing, December 2020, Elsevier

    Gianpaolo Savio

  50. Crack Arresters Design for Fatigue Strength Improvement of Additively Manufactured Components

    Article • November 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Gianpaolo Savio

  51. Concept selection and interactive design of an orthodontic functional appliance

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), October 2020, Springer Science + Business Media

    Gianpaolo Savio

  52. A modified volumetric energy density–based approach for porosity assessment in additive manufacturing process design

    Article • The International Journal of Advanced Manufacturing Technology, August 2020, Springer Science + Business Media

    Gianpaolo Savio

  53. Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components

    Article • Theoretical and Applied Fracture Mechanics, August 2020, Elsevier

    Gianpaolo Savio

  54. Mesh Simplification by Curvature-Enhanced Quadratic Error Metrics

    Article • Journal of Computer Science, August 2020, Science Publications

    Gianpaolo Savio

  55. Experimental study of phase change material (PCM) embedded in 3D periodic structures realized via additive manufacturing

    Article • International Journal of Thermal Sciences, July 2020, Elsevier

    Gianpaolo Savio

  56. Assessment of the Different Types of Failure on Anterior Cantilever Resin-Bonded Fixed Dental Prostheses Fabricated with Three Different Materials: An In Vitro Study

    Article • Applied Sciences, June 2020, MDPI AG

    Gianpaolo Savio

  57. Porosity Inducing Process Parameters in Selective Laser Melted AlSi10Mg Aluminium Alloy

    Article • Physical Mesomechanics, May 2020, Pleiades Publishing Ltd

    Gianpaolo Savio

  58. A New Methodology for the Digital Planning of Micro-Implant-Supported Maxillary Skeletal Expansion

    Article • Medical Devices Evidence and Research, March 2020, Taylor & Francis

    Gianpaolo Savio

  59. UX Concerns in Developing Functional Orthodontic Appliances

    Article • January 2020, Springer Science + Business Media

    Gianpaolo Savio

  60. Heterogeneous objects representation for Additive Manufacturing: a review

    Article • December 2019, RAFT IT and Publications Pvt Limited

    Gianpaolo Savio

  61. Influence of ceramic firing on marginal gap accuracy and metal-ceramic bond strength of 3D-printed Co-Cr frameworks

    Article • Journal of Prosthetic Dentistry, November 2019, Elsevier

    Gianpaolo Savio

  62. Conceptual Design of a Functional Orthodontic Appliance for the Correction of Skeletal Class II Malocclusion

    Article • September 2019, Springer Science + Business Media

    Gianpaolo Savio

  63. High Density AlSi10Mg Aluminium Alloy Specimens Obtained by Selective Laser Melting

    Article • September 2019, Springer Science + Business Media

    Gianpaolo Savio

  64. Scale and Shape Effects on the Fatigue Behaviour of Additively Manufactured SS316L Structures: A Preliminary Study

    Article • September 2019, Springer Science + Business Media

    Gianpaolo Savio

  65. Accuracy of an automated three-dimensional technique for the computation of femoral angles in dogs

    Article • Veterinary Record, July 2019, BMJ

    Gianpaolo Savio

  66. 3D surface imaging of abdominal wall muscular contraction

    Article • Computer Methods and Programs in Biomedicine, July 2019, Elsevier

    Gianpaolo Savio

  67. Optimization Approaches in Design for Additive Manufacturing

    Article • Proceedings of the Design Society International Conference on Engineering Design, July 2019, Cambridge University Press

    Gianpaolo Savio

  68. Full arch digital scanning systems performances for implant-supported fixed dental prostheses: a comparative study of 8 intraoral scanners

    Article • Journal of Prosthodontic Research, May 2019, Elsevier

    Gianpaolo Savio

  69. Manufacturing of Metal Frameworks for Full‐Arch Dental Restoration on Implants: A Comparison Between Milling and a Novel Hybrid Technology

    Article • Journal of Prosthodontics, April 2019, Wiley

    Gianpaolo Savio

  70. Homogenization driven design of lightweight structures for additive manufacturing

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), January 2019, Springer Science + Business Media

    Gianpaolo Savio

  71. Design of variable thickness triply periodic surfaces for additive manufacturing

    Article • Progress in Additive Manufacturing, January 2019, Springer Science + Business Media

    Gianpaolo Savio

  72. Implications of modeling approaches on the fatigue behavior of cellular solids

    Article • Additive Manufacturing, January 2019, Elsevier

    Gianpaolo Savio

  73. 3D Model Representation and Data Exchange for Additive Manufacturing

    Article • January 2019, Springer Science + Business Media

    Gianpaolo Savio

  74. Lattice structures design

    Article • Rapid Prototyping Journal, March 2018, Emerald

    Gianpaolo Savio

  75. In vitro assessment of the accuracy of digital impressions prepared using a single system for full-arch restorations on implants

    Article • International Journal of Computer Assisted Radiology and Surgery, March 2018, Springer Science + Business Media

    Gianpaolo Savio

  76. Automated computation of femoral angles in dogs from three-dimensional computed tomography reconstructions: Comparison with manual techniques

    Article • The Veterinary Journal, February 2018, Elsevier

    Gianpaolo Savio

  77. Geometric Modeling of Cellular Materials for Additive Manufacturing in Biomedical Field: A Review

    Article • Applied Bionics and Biomechanics, January 2018, Hindawi Publishing Corporation

    Gianpaolo Savio

  78. Precision of the Connection Between Implant and Standard or Computer-Aided Design/Computer-Aided Manufacturing Abutments: A Novel Evaluation Method

    Article • The International Journal of Oral & Maxillofacial Implants, January 2018, Quintessence Publishing

    Gianpaolo Savio

  79. Valutazione preliminare in vitro dell’accuratezza di impronte acquisite con scanner intraorale in arcate complete riabilitate con impianti

    Article • Dental Cadmos, April 2017, Edra SpA

    Gianpaolo Savio

  80. Shape and curvature error estimation in polished surfaces of ground glass molds

    Article • Optical Engineering, February 2017, SPIE

    Gianpaolo Savio

  81. Shape and curvature error estimation

    Article • Optical Engineering, February 2017, SPIE

    Gianpaolo Savio, Dr Raj Kumar Pal

  82. Fatigue strength of Bolted joints

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Gianpaolo Savio

  83. 3D Morphometric Parameters in Femur

    Article • Veterinary Surgery, September 2016, Wiley

    Gianpaolo Savio

  84. Lattice structures for Additive Manufacturing

    Article • September 2016, Springer Science + Business Media

    Gianpaolo Savio

  85. Research in Interactive Design (Vol. 4)

    Article • January 2016, Springer Science + Business Media

    Professor Benoit Eynard, Gianpaolo Savio

  86. A NovelIn VitroTechnique for Assessing Dental Implant Osseointegration

    Article • Tissue Engineering Part C Methods, November 2015, Mary Ann Liebert Inc

    Gianpaolo Savio

  87. In Vitro Implant Impression Accuracy Using a New Photopolymerizing SDR Splinting Material

    Article • Clinical Implant Dentistry and Related Research, March 2015, Wiley

    Gianpaolo Savio

  88. Lines of Curvature and Umbilical Points: Computation Method and Applications

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Gianpaolo Savio

  89. Process Optimization in Glass Polishing Based on a Material Removal Model

    Article • Advanced Science Letters, February 2013, American Scientific Publishers

    Gianpaolo Savio

  90. Optical Properties of Spectacle Lenses Computed by Surfaces Differential Quantities

    Article • Advanced Science Letters, February 2013, American Scientific Publishers

    Gianpaolo Savio

  91. An integrated methodology for the functional design of dental prosthesis

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), October 2012, Springer Science + Business Media

    Professor Roberto Raffaeli, Gianpaolo Savio

  92. Progressive lens design by discrete shape modelling techniques

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), October 2012, Springer Science + Business Media

    Gianpaolo Savio

  93. Shape analysis of a parametric human lens model based on geometrical constraints

    Article • Journal of Modern Optics, November 2011, Taylor & Francis

    Gianpaolo Savio

  94. A surface roughness predictive model in deterministic polishing of ground glass moulds

    Article • International Journal of Machine Tools and Manufacture, January 2009, Elsevier

    Gianpaolo Savio

  95. Surface and geometry error modeling in brittle mode grinding of ophthalmic lenses moulds

    Article • International Journal of Machine Tools and Manufacture, October 2006, Elsevier

    Gianpaolo Savio