All Stories

  1. Effects of fiber non-linearity and matrix type on the realization of foldable structures

    Article • January 2021, American Institute of Aeronautics and Astronautics (AIAA)

    Georgios Pappas

  2. Crack propagation in CFRP laminates under mode I monotonic and fatigue loads: A methodological study

    Article • Composite Structures, January 2021, Elsevier

    Georgios Pappas

  3. Material response and failure of highly deformable carbon fiber composite shells

    Article • Composites Science and Technology, October 2020, Elsevier

    Georgios Pappas

  4. Towards a geometry independent traction-separation and angle relation due to large scale bridging in DCB configuration

    Article • Composites Science and Technology, September 2020, Elsevier

    Georgios Pappas

  5. Experiments and numerical modelling on angle-ply laminates under remote mode II loading

    Article • Composites Part A Applied Science and Manufacturing, July 2020, Elsevier

    Georgios Pappas

  6. Variations on R-curves and traction-separation relations in DCB specimens loaded under end opening forces or pure moments

    Article • International Journal of Solids and Structures, May 2020, Elsevier

    Georgios Pappas

  7. Thin-Ply Thermoplastic Composites for Foldable Structures

    Article • January 2020, American Institute of Aeronautics and Astronautics (AIAA)

    Georgios Pappas

  8. Influence of ply-angle on fracture in antisymmetric interfaces of CFRP laminates

    Article • Composite Structures, May 2019, Elsevier

    Georgios Pappas

  9. A comparative study of mode I delamination behavior of unidirectional glass fiber-reinforced polymers with epoxy and polyurethane matrices using two methods

    Article • Engineering Fracture Mechanics, February 2019, Elsevier

    Georgios Pappas

  10. Micromechanical study on the origin of fiber bridging under interlaminar and intralaminar mode I failure

    Article • Composite Structures, February 2019, Elsevier

    Georgios Pappas

  11. Design optimization of a CFRP–aluminum joint for a bioengineering application

    Article • Design Science, January 2019, Cambridge University Press

    Georgios Pappas

  12. Individualized lightweight structures for biomedical applications using additive manufacturing and carbon fiber patched composites

    Article • Design Science, January 2019, Cambridge University Press

    Georgios Pappas

  13. The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part I – Experimental results

    Article • Composite Structures, January 2018, Elsevier

    Georgios Pappas

  14. The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II – Modeling

    Article • Composite Structures, December 2017, Elsevier

    Georgios Pappas

  15. Characterization of intralaminar mode I fracture of AS4/PPS composite using inverse identification and micromechanics

    Article • Composites Part A Applied Science and Manufacturing, December 2016, Elsevier

    Georgios Pappas

  16. Intralaminar fracture of unidirectional carbon/epoxy composite: experimental results and numerical analysis

    Article • International Journal of Solids and Structures, May 2016, Elsevier

    Georgios Pappas

  17. Large scale fiber bridging in mode I intralaminar fracture. An embedded cell approach

    Article • Composites Science and Technology, April 2016, Elsevier

    Georgios Pappas

  18. Fatigue assessment and failure analysis of shot-peened leaf springs

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2012, Wiley

    Dr Michail Malikoutsakis, Georgios Pappas