All Stories

  1. Flexible-rigid dynamics and vibration suppression of slender structures on partial space elevator
  2. A comprehensive review on computational control
  3. Attitude Stabilization of Slender Payloads in Partial Space Elevator Transport by Super-Twisting Sliding Mode Control
  4. Development of Pseudo-Celestial Navigation and Tracking System for Planar Air-Bearing Satellite Simulators
  5. Planar air-bearing microgravity testing for maneuverable space net deployment and retrieval with distributed cooperative control
  6. Bioinspired consensus-based spacecraft swarm control for autonomous capture of uncooperative targets
  7. Data Identification Optimal Control for Quantized Linear Systems Under DoS Attacks
  8. Rigid-flexible coupled dynamics and configuration stability of maneuverable space tether net under impact loads
  9. A novel Dyson-Harrop CubeSat for harvesting energy in solar wind
  10. Dynamic modeling and prediction of post launch rebound mechanism of tethered space net
  11. Geometric mechanics framework for tethered de-spinning of massive asteroids by small tug using passivity-based control
  12. An experimental investigation of microgravity conditions on FDM-based in-space polymer additive manufacturing
  13. Computational control framework for tethered space systems using finite element method
  14. Dynamical modeling of deployable electrodynamic tethers using geometric mechanics
  15. Tensile experiment based nonlinear tether element model for tethered space net
  16. Multi-Objective optimization for stable and efficient cargo transportation of partial space elevator
  17. Shape Reconstruction Of Unknown Tumbling Target Using Factor Graph-Based Dynamic SLAM
  18. Geometric Profile Control for Electrodynamic Tether
  19. Advanced 3D Hamiltonian nodal position finite element method for nonlinear dynamic analysis of rotating solids
  20. Elastodynamic analysis of rotating solids by novel nodal position finite element method
  21. Review of Autonomous Space Robotic Manipulators for On-Orbit Servicing and Active Debris Removal
  22. Fault-Tolerant Synchronization Control of Switched Complex Networks by a Proportional-Integral Intermediate Observer Approach
  23. Koopman-based data-driven control of networked nonlinear system under an event-triggered communication
  24. Dynamic Guaranteed Cost Event-Triggered-Based Anti-Disturbance Control of T-S Fuzzy Wind-Turbine Systems Subject to External Disturbances
  25. Spacecraft Proximity Operations Under Motion and Input Constraints: A Learning-Based Robust Optimal Control Approach
  26. Equilibrium state of axially symmetric electric solar wind sail at arbitrary sail angles
  27. Path planning of 6-DOF free-floating space robotic manipulators using reinforcement learning
  28. Development of 6DOF Hardware-in-the-Loop Ground Testbed for Autonomous Robotic Space Debris Removal
  29. A comprehensive survey of space robotic manipulators for on-orbit servicing
  30. A comprehensive review on metal laser additive manufacturing in space: Modeling and perspectives
  31. Improving Soft-Capture Phase Success in Space Debris Removal Missions: Leveraging Deep Reinforcement Learning and Tactile Feedback
  32. Development of 6DOF Hardware-In-the-Loop Ground Testbed for Autonomous Robotic Space Debris Removal
  33. Multi-Debris Capture by Tethered Space Net Robot via Redeployment and Assembly
  34. Review of machine learning in robotic grasping control in space application
  35. Characterization of out-of-plane libration of tethered satellite systems in elliptical orbits
  36. Reinforcement learning for path planning of free-floating space robotic manipulator with collision avoidance and observation noise
  37. Towards Real-World Efficiency: Domain Randomization in Reinforcement Learning for Pre-Capture of Free-Floating Moving Targets by Autonomous Robots
  38. Dynamics-Informed hierarchical sliding mode control for libration of partial space elevators in cargo transportation
  39. A Lithium-Ion Battery Degradation Prediction Model With Uncertainty Quantification for Its Predictive Maintenance
  40. New geometric formulation for libration dynamics and suppression of partial space elevator by fuzzy logic and thrust vectoring control
  41. Evaluation of E-sail parameters on central spacecraft attitude stability using a high-fidelity rigid-flexible coupling model
  42. An introductory review of swarm technology for spacecraft on‐orbit servicing
  43. Enhancing Robotic Grasping of Free-Floating Targets with Soft Actor-Critic Algorithm and Tactile Sensors: a Focus on the Pre-Grasp Stage
  44. Capturing an Unknown Uncooperative Target with a Swarm of Spacecraft
  45. An Experimental Investigation of Microgravity Conditions on FDM-Based In-Space Additive Manufacturing
  46. Space Debris Mitigation: Integration of Carbon Nanotube Cold Cathode Electron Emission with Electrodynamic Tether Payload for Rapid Deorbiting of Nanosatellites
  47. Utilizing deep reinforcement learning for tactile-based autonomous capture of non-cooperative objects in space
  48. Space tether system state estimation using distributed fibre optical strain measurement, inverse finite element method and Kalman filter
  49. Kinematic Path Planning for Underactuated Spacecraft Reorientation with Forbidden Pointing Constraints
  50. Barrier function-based prescribed-performance adaptive attitude tracking control for spacecraft with uncertainties
  51. Out-of-plane chaotic motion and suppression for tethered tug-debris systems with thrust perturbation
  52. Cross-verification and benchmarking analysis of electrodynamic tether simulators
  53. Orbital radius keeping of floating partial space elevator in cargo transposition
  54. Global dynamics of a ring-tethered three-satellite system in any plane
  55. Cooperative game-based multi-objective optimization of cargo transportation with floating partial space elevator
  56. Finite-Time Adaptive Consensus Tracking Control Based on Barrier Function and Cascaded High-Gain Observer
  57. Configuration Keeping Technology of Partial Space Elevators
  58. Spin deployment of Hub-Spoke tethered satellite formation with sliding mode tether tension control
  59. Cu and Fe bimetallic heterostructure nanoparticles supported by carbon nanotube for multilayer structure electromagnetic interference shielding composite
  60. Development of air-bearing microgravity testbed for autonomous spacecraft rendezvous and robotic capture control of a free-floating target
  61. Deep reinforcement learning for robotic grasping with tactile sensor feedback
  62. Symmetric and asymmetric dynamics of a tethered satellite in nontypical planes
  63. Adaptive Anti-Saturation Prescribed-Time Control for Payload Retrieval of Tethered Space System
  64. A multi-scale model to predict the electromagetic interference shielding performance of (Fe/Cu)@CNT/SA/PDMS flexible composite
  65. Attitude Control and Stability Analysis of Electric Sail
  66. Effect of Martensitic Transformation of NiTi Particles on Temperature Sensitivity of Flexible VGCF/PDMS Films
  67. Fault-Tolerant Reduced-Attitude Control for Spacecraft Constrained Boresight Reorientation
  68. Libration-free cargo transfer of floating space elevator
  69. Data-driven predictive maintenance strategy considering the uncertainty in remaining useful life prediction
  70. Modeling and characterization of the electrical conductivity on metal nanoparticles/carbon nanotube/polymer composites
  71. Improving the mechanical and damping properties of polymer/memory alloy composite by introducing nanotubes covered with nano-scale Ni particles
  72. Libration-Free Cargo Transfer of Floating Space Elevator
  73. Experiment and simulation of flexible CNT/SA/PDMS electromagnetic shielding composite
  74. Single-Atom and Bimetallic Nanoalloy Supported on Nanotubes as a Bifunctional Electrocatalyst for Ultrahigh-Current-Density Overall Water Splitting
  75. On Attitude Dynamics of Electric Solar Wind Sail
  76. Atomic order transition of TiNiPt nanoparticles supported on carbon nanotubes for the stable hydrogen evolution reaction
  77. Passivity-Based Model Predictive Control for Tethered Despin of Massive Space Objects by Small Space Tug
  78. Dynamic Predictive Maintenance Scheduling Using Deep Learning Ensemble for System Health Prognostics
  79. A new looped tether transportation system with multiple rungs
  80. Dual quaternion-based adaptive iterative learning control for flexible spacecraft rendezvous
  81. Dynamic characterization and sail angle control of electric solar wind sail by high-fidelity tether dynamics
  82. Prescribed performance based dual-loop control strategy for configuration keeping of partial space elevator in cargo transportation
  83. Despin An Asteroid By Tethered Spacecraft
  84. Fuzzy-based continuous current control of electrodynamic tethers for stable and efficient orbital boost
  85. A data-driven degradation prognostic strategy for aero-engine under various operational conditions
  86. Stable cargo transportation of partial space elevator with multiple actuators
  87. Barrier function based finite‐time tracking control for a class of uncertain nonlinear systems with input saturation
  88. Model predictive control for electrodynamic tether geometric profile in orbital maneuvering with finite element state estimator
  89. Analytical and Experimental Investigation of Stabilizing Rotating Uncooperative Target by Tethered Space Tug
  90. Validation of CubeSat tether deployment system by ground and parabolic flight testing
  91. Deployment of Hub-Spoke Tethered Satellite Formation with Adaptive Sliding Mode Tension Control
  92. Large Deformation Dynamic Analysis of a Cable System by a New Hamiltonian Finite Element Method
  93. Adaptive sliding mode disturbance observer-based control for rendezvous with non-cooperative spacecraft
  94. Flexoelectric energy harvesters utilizing controllably wrinkled micro-dielectric film
  95. Libration suppression of partial space elevator by controlling climber attitude using reaction wheel
  96. Model Predictive Control for Electrodynamic Tether Geometric Profile in Orbital Maneuvering with Finite Element State Estimator
  97. Estimation of flexible space tether state based on end measurement by finite element Kalman filter state estimator
  98. Effect of nano-scale Cu particles on the electrical property of CNT/polymer nanocomposites
  99. Rigid-flexible coupling effect on attitude dynamics of electric solar wind sail
  100. Libration and end body swing stabilization of a parallel partial space elevator system
  101. A novel looped space tether transportation system with multiple climbers for high efficiency
  102. Stability and control of radial deployment of electric solar wind sail
  103. Prediction Interval Estimation of Aeroengine Remaining Useful Life Based on Bidirectional Long Short-Term Memory Network
  104. Adaptive learning observer for spacecraft attitude control with actuator fault
  105. Analysis of thrust-induced sail plane coning and attitude motion of electric sail
  106. Libration suppression of moon-based partial space elevator in cargo transportation
  107. Experimental Validation of Detumbling Space Debris by Tethered Space Tug by Air Bearing Testbed
  108. A Novel Concept of a Parallel Partial Space Elevator With Multiple Carts
  109. Automatic orbital maneuver for mega-constellations maintenance with electrodynamic tethers
  110. Vibration damping mechanism of CuAlMn/polymer/carbon nanomaterials multi-scale composites
  111. Orbital boost characteristics of spacecraft by electrodynamic tethers with consideration of electric-magnetic-dynamic energy coupling
  112. Flight Dynamics and Control Strategy of Electric Solar Wind Sails
  113. Investigation of electrical conductivity and electromagnetic interference shielding performance of Au@CNT/sodium alginate/polydimethylsiloxane flexible composite
  114. Dynamic Analysis of Deployment of Electric Solar Wind Sail
  115. PLSD: A Perceptually Accurate Line Segment Detection Approach
  116. Coherency evaluation of GNSS MBOC pilot and data signal in joint tracking
  117. Dynamics of Partial Space Elevator with Parallel Tethers and Multiple Climbers
  118. Electrical characterization of flexible CNT/polydimethylsiloxane composite films with finite thickness
  119. Hamiltonian formulation and energy-based control for space tethered system deployment and retrieval
  120. Dynamics and control of de-spinning giant asteroids by small tethered spacecraft
  121. A percolation network model to predict the electrical property of flexible CNT/PDMS composite films fabricated by spin coating technique
  122. Dynamics and control of tethered multi-satellites in elliptic orbits
  123. On libration suppression of partial space elevator with a moving climber
  124. Characteristics of coupled orbital-attitude dynamics of flexible electric solar wind sail
  125. A high accurate hamiltonian nodal position finite element method for spatial cable structures undergoing long-term large overall motion
  126. Dynamics and operation optimization of partial space elevator with multiple climbers
  127. Deployment control of tethered space systems with explicit velocity constraint and invariance principle
  128. Three-Dimensional High-Fidelity Dynamic Modeling of Tether Transportation System with Multiple Climbers
  129. Dynamics and de-spin control of massive target by single tethered space tug
  130. Fractional-order sliding mode control for deployment of tethered spacecraft system
  131. Attitude Stabilization of Tug–Towed Space Target by Thrust Regulation in Orbital Transfer
  132. Kinematics-based incremental visual servo for robotic capture of non-cooperative target
  133. Parallel Optimization of Trajectory Planning and Tracking for Three-Body Tethered Space System
  134. Optimized energy harvesting through piezoelectric functionally graded cantilever beams
  135. Analysis on BDS signal ranging performance onboard LEO satellite
  136. A virtual experiment for partial space elevator using a novel high-fidelity FE model
  137. De-Spin of Massive Rotating Space Object by Tethered Space Tug
  138. Stable orbital transfer of partial space elevator by tether deployment and retrieval
  139. A unified energy-based control framework for tethered spacecraft deployment
  140. Predictive visual servo kinematic control for autonomous robotic capture of non-cooperative space target
  141. High temperature response capability in carbon nanotube/polymer nanocomposites
  142. Space tether deployment with explicit maximum libration angle constraint and tension disturbance
  143. Temperature-independent piezoresistive sensors based on carbon nanotube/polymer nanocomposite
  144. Piecewise Parallel Optimal Algorithm
  145. Pose and motion estimation of unknown tumbling spacecraft using stereoscopic vision
  146. Energy-based Output Feedback Tension Control for Space Tether Deployment under Physical Constraint
  147. Coupled Orbital-Attitude Dynamics Of Flexible Electric Solar Wind Sail
  148. Development Of A Ground Based Testbed For Studying The Libration Dynamics Of Orbiting Tethered Satellite Systems
  149. High Density Polyethylene/Carbon Nanotube Nanocomposite Foams: Electrical Conductivity And Percolation Threshold
  150. Lagrangian, Hamiltonian, And Energy-Based Control For Space Tethered System
  151. The Libration Stabilization Of A Partial Space Elevator System Using Analytical Reel Rate Control
  152. Vision-Based Relative State And Inertia Ratio Estimation Of Unknown Targets
  153. Practical Implementation of Test-As-You-Fly for the DESCENT CubeSat Mission
  154. Model predictive control for spacecraft rendezvous in elliptical orbit
  155. Dynamics and control of three-body tethered system in large elliptic orbits
  156. Hybrid Cooperative Guidance Law for Active Aircraft Defense Against a Guided Missile
  157. Wrinkling of flexoelectric nano-film/substrate systems
  158. Pulse-Width Pulse-Frequency Modulated Nonlinear Model Predictive Control for Spacecraft Rendezvous
  159. Vision-Based Relative State Estimation for A Non-Cooperative Target
  160. Nonovershooting Space Tether Deployment with Explicit Constraint of Positive Deployment Velocity
  161. Relative State and Inertia Estimation of Unknown Tumbling Spacecraft by Stereo Vision
  162. Two-Dimensional Continuous Terminal Interception Guidance Law With Predefined Convergence Performance
  163. Eliminating common biases in modelling the electrical conductivity of carbon nanotube–polymer nanocomposites
  164. Parameter influence on electron collection efficiency of a bare electrodynamic tether
  165. Precise Analysis of Deorbiting by Electrodynamic Tethers Using Coupled Multiphysics Finite Elements
  166. Space Tether Deployment with Explicit Non-Overshooting Length and Positive Velocity Constraints
  167. Hamiltonian Nodal Position Finite Element Method for Cable Dynamics
  168. Libration suppression of tethered space system with a moving climber in circular orbit
  169. Line-of-sight nonlinear model predictive control for autonomous rendezvous in elliptical orbit
  170. Characterization of carbon nanotube enhanced interlaminar fracture toughness of woven carbon fiber reinforced polymer composites
  171. DESCENT: Mission Architecture and Design Overview
  172. Effect of temperature on the electrical property of epoxy composites with carbon nanotube
  173. Spacecraft orbit propagator integration with GNSS in a simulated scenario
  174. Multiphysics elastodynamic finite element analysis of space debris deorbit stability and efficiency by electrodynamic tethers
  175. Multisensor Parallel Largest Ellipsoid Distributed Data Fusion with Unknown Cross-Covariances
  176. Editorial
  177. Prescribed performance slide mode guidance law with terminal line-of-sight angle constraint against maneuvering targets
  178. Research on Space Debris Protection and Removal Strategy Based on Space Station Platform
  179. Reduction of Libration Angle in Electrodynamic Tether Deployment by Lorentz Force
  180. Electron tunnelling and hopping effects on the temperature coefficient of resistance of carbon nanotube/polymer nanocomposites
  181. Fractional order sliding mode control for tethered satellite deployment with disturbances
  182. Simulation of collision probability between space station and space debris and structure failure probability
  183. Timescale Separate Optimal Control of Tethered Space-Tug Systems for Space-Debris Removal
  184. Model Predictive Control with Output Feedback for a Deorbiting Electrodynamic Tether System
  185. Incremental visual servo control of robotic manipulator for autonomous capture of non-cooperative target
  186. Active Space Debris Removal by Visual Servo Controlled Autonomous Robotics
  187. Multiphysics Modeling of Electron Collection by Bare Flexible Electrodynamic Tether in Space Debris Deorbit
  188. Mission Design for a CubeSat Deorbit Experiment Using an Electrodynamic Tether
  189. Mass Ratio of Electrodynamic Tether to Spacecraft on Deorbit Stability and Efficiency
  190. Multiphysics Finite Element Modeling of Current Generation of Bare Flexible Electrodynamic Tether
  191. State dependent model predictive control for orbital rendezvous using pulse-width pulse-frequency modulated thrusters
  192. Effect of carbon nanotubes on electromagnetic interference shielding of carbon fiber reinforced polymer composites
  193. Autonomous robotic capture of non-cooperative target by adaptive extended Kalman filter based visual servo
  194. Exponentially Convergent Velocity Observer for an Electrodynamic Tether in an Elliptical Orbit
  195. Incremental inverse kinematics based vision servo for autonomous robotic capture of non-cooperative space debris
  196. Space Tether Deployment Control with Explicit Tension Constraint and Saturation Function
  197. Libration Control of Bare Electrodynamic Tethers Considering Elastic–Thermal–Electrical Coupling
  198. Constrained tension control of a tethered space-tug system with only length measurement
  199. Libration and transverse dynamic stability control of flexible bare electrodynamic tether systems in satellite deorbit
  200. Tension control of space tether via online quasi-linearization iterations
  201. small satellite ground simulator; infrared vision navigation system
  202. Development of an Air-Bearing Inclinable Turntable for Testing Tether Deployment
  203. Fast Nonsingular Terminal Sliding Mode to Attenuate the Chattering for Missile Interception with Finite Time Convergence
  204. Ground based testing of space tether deployment using an air bearing inclinable turntable
  205. Position-based visual servo control of autonomous robotic manipulators
  206. Autonomous Robotic Capture of Non-cooperative Target by Vision-based Kinematic Control
  207. Impact of Atmospheric Perturbation on Dynamics of Space Tether Systems
  208. Long-term dynamic modeling of tethered spacecraft using nodal position finite element method and symplectic integration
  209. Fractional-Order Dynamics and Control of Rigid–Flexible Coupling Space Structures
  210. Piezoresistive Strain Sensors Based on Carbon Nanotube Networks: Contemporary approaches related to electrical conductivity.
  211. Dynamic Modeling of Towed Cable System Using the Nodal Position Finite Element and Symplectic Integration
  212. Giant piezoresistivity in aligned carbon nanotube nanocomposite: account for nanotube structural distortion at crossed tunnel junctions
  213. Anisotropic electrical conductivity of polymer composites with aligned carbon nanotubes
  214. POSITION-BASED VISUAL SERVOING IN ROBOTIC CAPTURE OF MOVING TARGET ENHANCED BY KALMAN FILTER
  215. Dynamic control of space tether deployment
  216. Modeling and characterization of carbon nanotube agglomeration effect on electrical conductivity of carbon nanotube polymer composites
  217. Characterization of Electrical Conductivity of Carbon Nanotube Composites
  218. Dynamic Modeling of Space Electrodynamic Tether System Using the Nodal Position Finite Element and Symplectic Integration
  219. Visual-Servo Autonomous Robotic Manipulators for Capturing Non-Cooperative Target
  220. Fractional-Order Tension Control Law for Deployment of Space Tether System
  221. Fractional order tension control for stable and fast tethered satellite retrieval
  222. Carbon nanotube agglomeration effect on piezoresistivity of polymer nanocomposites
  223. Optimal Current Switch ing Control of Electrodynamic Tethers for Fast Deorbit
  224. Long-Term Libration Dynamics and Stability Analysis of Electrodynamic Tethers in Spacecraft Deorbit
  225. Fractional Order Control of Tethered Satellite System Deployment and Retrieval
  226. Vision-based Pose and Motion Estimation of Non-cooperative Target for Space Robotic Manipulators
  227. Modeling sensor behavior of CNT/polymer nanocomposite
  228. On the mechanism of piezoresistivity of carbon nanotube polymer composites
  229. Polymer nanocomposite for space applications
  230. Optimal Control of Nanosatellite Fast Deorbit Using Electrodynamic Tether
  231. Autonomous robotic capture of non-cooperative target using visual servoing and motion predictive control
  232. Long term dynamics and optimal control of nano-satellite deorbit using a short electrodynamic tether
  233. Optimal Control of Self-Deorbit Nano-Satellite Using Electrodynamic Tethers
  234. The Latest Progress of Intelligent Manufacturing Reviews
  235. Modeling electrical conductivity of nanocomposites by considering carbon nanotube deformation at nanotube junctions
  236. Input Shaping-based Impedance Control for Flexible Joint Robotic Manipulator
  237. Modeling and Control of Flexible Joint Robotic Manipulator
  238. Nano-Satellite Deorbit by Bare Electrodynamic Tether
  239. Effect of carbon nanotube geometry upon tunneling assisted electrical network in nanocomposites
  240. Libration dynamics and stability of electrodynamic tethers in satellite deorbit
  241. WAVE REFLECTION IN PIEZOELECTRIC HALF-PLANE
  242. Dynamics of Nanosatellite Deorbit by Bare Electrodynamic Tether in Low Earth Orbit
  243. Investigation of impedance controller for autonomous on-orbit servicing robot
  244. Interface effects on the viscoelastic characteristics of carbon nanotube polymer matrix composites
  245. Experimental investigation of inflated multiple-beam structures for future space tower
  246. Optimal trajectory design of a deorbiting electrodynamic tether system
  247. Pressure induced active control mechanism for a pneumatically supported space tower
  248. Reflection and refraction of plane waves at interface between two piezoelectric media
  249. Dynamics of Deorbiting of Low Earth Orbit Nano-satellites by Bare Electrodynamic Tether
  250. Vision-Based On-orbit Service Robot
  251. A generalized enriched finite element method for blunt cracks
  252. Postbuckling of sandwich plates with nanotube-reinforced composite face sheets resting on elastic foundations
  253. Interfacial Thermal Stresses in Fiber Reinforced Composites
  254. Tunneling resistance and its effect on the electrical conductivity of carbon nanotube nanocomposites
  255. A novel approach to predict the electrical conductivity of multifunctional nanocomposites
  256. The Potential of Ultrasonic Non-Destructive Measurement of Residual Stresses by Modal Frequency Spacing using Leaky Lamb Waves
  257. Percolation threshold and electrical conductivity of a two-phase composite containing randomly oriented ellipsoidal inclusions
  258. Modeling electrical conductivities of nanocomposites with aligned carbon nanotubes
  259. Design of a Electrodynamic Tether Nanosatellite Mission
  260. Compressive and thermal postbuckling behaviors of laminated plates with piezoelectric fiber reinforced composite actuators
  261. Dynamic modeling of cable towed body using nodal position finite element method
  262. A nodal position finite element method for plane elastic problems
  263. Consistent element coupling in nonlinear static and dynamic analyses using explicit solvers
  264. Stress Evaluation Using Ultrasonic Interference Spectrum of Leaky Lamb Waves
  265. Development of autonomous robot for space servicing
  266. Dynamic modeling of cable system using a new nodal position finite element method
  267. Fatigue Life Estimation of Helicopter Landing Probe Based on Dynamic Simulation
  268. A free-standing space elevator structure: A practical alternative to the space tether
  269. Micromechanics of interfacial thermal stresses in fiber reinforced composites
  270. Dynamic Stability Analysis of Aerial Refueling Hose/Drogue System by Finite Element Method
  271. Nodal Position Finite Element Method and its Application to Dynamics of Cable Systems
  272. Elastodynamic Analysis of Towed Cable Systems by Global Nodal Position Vector Finite Element Method
  273. Vibration analysis of a new curved beam element
  274. Modeling and simulation of aerial refueling by finite element method
  275. Nonlinear FE-based investigation of flexural damping of slacking wire cables
  276. Elastodynamic Analysis of Aerial Refueling Hose Using Curved Beam Element
  277. Elastodynamic analysis of low tension cables using a new curved beam element
  278. ANALYSIS OF THREE-DIMENSIONAL LOCKING-FREE CURVED BEAM ELEMENT
  279. Dynamic multiscale simulation of towed cable and body
  280. On the thermoelastic stresses of multiple interacting inhomogeneities
  281. People’s Republic of China
  282. Dynamic robot manipulator trajectory planning for obstacle avoidance
  283. Stress distribution in dissimilar materials containing inhomogeneities near the interface using a novel finite element
  284. Analysis of cracks perpendicular to bimaterial interfaces using a novel finite element
  285. A novel finite element for treating inhomogeneous solids