All Stories

  1. Texture-engineered ceramics—Property enhancements through crystallographic tailoring
  2. ChemInform Abstract: Cold Sintering: A Paradigm Shift for Processing and Integration of Ceramics.
  3. Direct foaming and seeding of highly porous, lightweight gypsum
  4. Pb2+-stabilized Ruddlesden–Popper (Sr1−xPbx)3Ti2O7 ceramics
  5. PB2+-stabilized Ruddlesden–Popper (Sr1–xPBx)3Ti2O7 ceramics – ERRATUM
  6. Particle size effects on yttrium aluminum garnet (YAG) phase formation by solid-state reaction
  7. Improved Fracture Behavior of Alumina Microstructural Composites with Highly Textured Compressive Layers
  8. Low-field dynamic magnetic alignment and templated grain growth of diamagnetic PMN–PT ceramics
  9. Creating a safety culture in academic laboratories
  10. Fabrication and properties of radially 〈001〉C textured PMN-PT cylinders for transducer applications
  11. Low temperature, transient liquid phase sintering of B2O3-SiO2-doped Nd:YAG transparent ceramics
  12. Processing and mechanical response of highly textured Al2O3
  13. Thermomechanical Behavior of Ceramic Green Bodies During Presintering
  14. Efficient Resonantly-Pumped Eye-Safe Composite Ceramic Er:YAG Laser
  15. Tape Cast Composite Ceramic Er:YAG Laser
  16. The Leidenfrost effect during spray pyrolysis of nickel oxide-gadolinia doped ceria composite thin films
  17. Templated Grain Growth of <001> Textured PMN-28PT Using SrTiO3Templates
  18. First-Principles Calculations and Thermodynamic Modeling of the Al2O3-Nd2O3System
  19. Aqueous slip casting of transparent yttrium aluminum garnet (YAG) ceramics
  20. Microstructural Changes in Hot Isostatically Pressed Alumina-Glass Composites
  21. Synthesis of Nano-Scaled α-Al2O3 Particles by Combustion Spray Pyrolysis
  22. PROGRESS IN CERAMIC LASERS
  23. Synthesis of Nano-Scaled α-Al2O3 Particles by Combustion Spray Pyrolysis
  24. Comparison of Optical, Mechanical and Thermo-Optical Properties of Oxide Polycrystalline Laser Gain Materials with Single Crystals
  25. Mullite Transformation Kinetics in P2O5-, TiO2-, and B2O3-Doped Aluminosilicate Gels
  26. Kinetic Analysis of Combustion Synthesis of Lead Magnesium Niobate from Metal Carboxylate Gels
  27. Texture Development by Templated Grain Growth in Liquid-Phase-Sintered α-Alumina
  28. Anisotropic Grain Growth in Diphasic-Gel-Derived Titania-Doped Mullite
  29. Liquid-Phase Sintering of Alumina Coated with Magnesium Aluminosilicate Glass
  30. Determination of the Mechanical Response of Sintering Compacts by Cyclic Loading Dilatometry
  31. Constrained Densification of Alumina/Zirconia Hybrid Laminates, II: Viscoelastic Stress Computation
  32. Constrained Densification of Alumina/Zirconia Hybrid Laminates, I: Experimental Observations of Processing Defects
  33. Molten Salt Synthesis of Anisotropic Sr2Nb2O7 Particles
  34. Effect of Preparation Conditions on Phase Formation, Densification, and Microstructure Evolution in La-β-Al2O3/Al2O3 Composites
  35. Templated Grain Growth of Barium Titanate Single Crystals
  36. Critical Factors in the Templated Grain Growth of Textured Reaction-Bonded Alumina
  37. The Reaction-Bonded Aluminum Oxide (RBAO) Process: II, The Solid-State Oxidation of RBAO Compacts
  38. Comparison of Texture Analysis Techniques for Highly Oriented α-Al2O3
  39. Fabrication and Electrical Properties of Textured Sr0.53Ba0.47Nb2O6 Ceramics by Templated Grain Growth
  40. Molten salt synthesis of anisometric particles in the SrO–Nb2O5–BaO system
  41. Measurement of Viscosity of Densifying Glass-Based Systems by Isothermal Cyclic Loading Dilatometry
  42. Warpage Evolution of Screen Printed Multilayer Ceramics during Co-Firing
  43. (Reactive) Templated Grain Growth of Textured Sodium Bismuth Titanate (Na1/2Bi1/2TiO3-BaTiO3) Ceramics—II Dielectric and Piezoelectric Properties
  44. (Reactive) Templated Grain Growth of Textured Sodium Bismuth Titanate (Na1/2Bi1/2TiO3-BaTiO3) Ceramics—I Processing
  45. Microwave Sintering of Alumina at 2.45 GHz
  46. Bending Creep Test to Measure the Viscosity of Porous Materials during Sintering
  47. Dielectric and piezoelectric properties of textured Sr0.53Ba0.47Nb2O6 ceramics prepared by templated grain growth
  48. Sintering of α-Al2O3-seeded nanocrystalline γ-Al2O3 powders
  49. Textured Alumina Ceramics by Uniaxial Pressing
  50. Hydrothermal Synthesis of Tabular Perovskite Particles
  51. Templated Grain Growth of Textured Piezoelectric Ceramics
  52. Co-Sintering of Multilayer Ceramics
  53. Preparation and Fracture Behavior of Alumina Platelet Reinforced Alumina-Monazite Composites
  54. Kinetics of Templated Grain Growth of 0.65Pb(Mg1/3Nb2/3)O3·0.35PbTiO3
  55. Response of granular powders to uniaxial loading and unloading
  56. Low-Temperature Reactive Sintering of 0.65PMN·0.35PT
  57. Seeding of the Reaction-Bonded Aluminum Oxide Process
  58. Texturing of mullite by templated grain growth with aluminum borate whiskers
  59. Thermogravimetric analysis of organic binder segregation during drying of particulate suspensions
  60. Sintering of Mixtures of Seeded Boehmite and Ultrafine -Alumina
  61. Dielectric and Electromechanical Properties of Textured Niobium-Doped Bismuth Titanate Ceramics
  62. Reaction-based Processing of Textured Alumina by Templated Grain Growth
  63. Residual stresses in alumina–zirconia laminates
  64. Effect of phase separation in metal carboxylate gels on perovskite lead magnesium niobate crystallization
  65. Seeding of Perovskite Lead Magnesium Niobate Crystallization from Pb-Mg-Nb-EDTA Gels
  66. Development of Textured Mullite by Templated Grain Growth
  67. Anisotropic grain growth in boria-doped diphasic mullite gels
  68. Templated Grain Growth of Textured Bismuth Titanate
  69. Effect of Seeding and Water Vapor on the Nucleation and Growth of α-Al2O3 from γ-Al2O3
  70. Mechanical characterization of Al2O3/ZrO2 hybrid laminates
  71. Thermal analysis of phase transformation kinetics in α-Al2O3 seeded boehmite and γ-Al2O3
  72. Interfacial precipitation in titania-doped diphasic mullite gels
  73. Mechanisms of phase separation in gel-based synthesis of multicomponent metal oxides
  74. Synthesis, Decomposition and Crystallization Characteristics of Peroxo−Citrato−Niobium:  An Aqueous Niobium Precursor
  75. Seeding for the Development of Unique Microstructures
  76. Dry pressing boehmite gels for the fabrication of monolithic α-Al2O3
  77. Transformation and Densification of Nanocrystalline θ-Alumina during Sinter Forging
  78. Critical Factors in the Production of Sol-Gel Derived Porous Alumina
  79. Pressureless Co-Sintering of Al2O/ZrO2 Multilayers and Bilayers
  80. Anisotropic grain growth in TiO2-doped alumina
  81. Computer simulation of anisotropic grain growth
  82. Submicrometer Transparent Alumina by Sinter Forging Seeded γ-Al2O3 Powders
  83. Constitutive Model for Dry Cohesive Powders with Application to Powder Compaction
  84. Formation of Solid and Hollow Spherical Particles by Spray Pyrolysis
  85. Ceramic Powder Synthesis by Spray Pyrolysis
  86. Sintering of foamed silica gels
  87. Synthesis of Barium Titanate by a Basic pH Pechini Process
  88. Chemistry-crystallization relations in molecular mullite gels
  89. Synthesis of Ceramic Powders from Metal Alkoxides
  90. YBa2Cu3O7−x Superconductor powder synthesis by spray pyrolysis of organic acid solutions
  91. SiC-Whisker-Reinforced Cellular SiO2 Composites
  92. Synthesis of cellular inorganic materials by foaming sol-gels
  93. Crystallization of sol-gel-derived lithium aluminosilicate (LAS) glass ceramic powders
  94. Hybrid Gels Designed for Mullite Nucleation and Crystallization Control
  95. Synthesis of Solid, Spherical Zirconia Particles by Spray Pyrolysis
  96. Alumina Monolith Formation by Flocculation of Boehmite Sols
  97. Hybrid Gels for Homoepitactic Nucleation of Mullite
  98. Gas Diffusion During Containerless Hot Isostatic Pressing of Liquid-Phase Sintered Ceramics
  99. Low-Temperature Sintering of Seeded Sol-Gel-Derived, ZrO2-Toughened Al2O3 Composites
  100. Transformation and Microstructure Control in Boehmite-Derived Alumina by Ferric Oxide Seeding
  101. Liquid-Phase-Assisted Transformation of Seeded gamma-Alumina
  102. A Method for Preparation of Unsupported Sol-Gel Thin Films
  103. Metastable solid solution extension of mullite by rapid solidification
  104. Tailoring Multiphase and Composite Ceramics
  105. The Need for Controlled Heterogeneous Nucleation in Ceramic Processing
  106. Controlled Transformation and Sintering of a Boehmite Sol-Gel by alpha-Alumina Seeding
  107. Enhanced Densification of Boehrmte Sol-Gels by ?-Alumina Seeding
  108. Fluoride salt effects on the decomposition of dolomite
  109. Magnesium salt decomposition and morphological development during evaporative decomposition of solutions
  110. Reactive-Phase Calsintering of Calcium-Carbonate-Derived Lime
  111. Preparation of Alumina-Zirconia Powders by Evaporative Decomposition of Solutions
  112. Microstructural Analysis of Rapidly Solidified Alumina
  113. Chloride salt effects on the decomposition of dolomite
  114. Sintering of Inhomogeneous Binary Powder Mixtures
  115. Packing and Sintering Relations for Binary Powders
  116. Inhomogeneity-Packing Density Relations in Binary hwders