All Stories

  1. Dynamic response of MRE under power tool excitation: Implications for hand-arm vibration reduction
  2. Development and Experimental Verification of a Novel IR-Sensor Module for Rotor Position Sensing in an In-wheel SRM
  3. Implementation of model free fuzzy control on a novel magnetorheological elastomer-based handle for a rotary hammer
  4. Driving Cycle-Based Design Optimization and Experimental Verification of a Switched Reluctance Motor for an E-Rickshaw
  5. Experimental investigation and optimization of performance, emission, and vibro-acoustic parameters of SI engine fueled with n-propanol and gasoline blends using ANN-GA coupled with NSGA3-modified TOPSIS hybrid approach
  6. Influence of Stator Structure on the Electromagnetic Performance of an In-Wheel Multi-teeth SRM
  7. Closed Loop Vector Formulation in Eulers Complex Numbers for Multi Loop Planar Mechanisms With N bars A Novel Modeling Approach and Algorithm
  8. Design and Performance Analysis of a Switched Reluctance Motor Using Finite Element Analysis and Magnetic Equivalent Circuit Model
  9. Conceptualization and Design of Remotely-Accessible Hardware Interface (RAHI) Laboratory
  10. Numerical and experimental study on dynamic characteristics of honeycomb core sandwich panel from equivalent 2D model
  11. Fault diagnosis of internal combustion engine gearbox using vibration signals based on signal processing techniques
  12. A novel approach to characterize the magnetic field and frequency dependent dynamic properties of magnetorheological elastomer for torsional loading conditions
  13. Performance of magnetorheological elastomer based torsional vibration isolation system for dynamic loading conditions
  14. Theoretical and experimental investigation of model-free adaptive fuzzy sliding mode control for MRE based adaptive tuned vibration absorber
  15. An Experimental Study to Evaluate the Warpage and Cracking Issues in Fused Deposition Modeling
  16. Preparation and dynamic characterization of polymer based magnetorheological elastomer for vibration isolator
  17. Experimental investigation of 3D-printed polymer-based MR sandwich beam under discretized magnetic field
  18. Experimental study on the dynamic properties of magneto-rheological materials
  19. Engine gearbox fault diagnosis using machine learning approach
  20. IoT Based Joystick Controlled Pibot Using Socket Communication
  21. Parametric studies on bending stiffness and damping ratio of Sandwich structures
  22. A comparative study on the effectiveness of system parameters in monitoring pre-load loss in bolted joints
  23. Vibro-acoustic response and sound transmission loss characteristics of truss core sandwich panel filled with foam
  24. Design of magneto-rheological brake for optimum dimension
  25. Integer and Fractional Order-Based Viscoelastic Constitutive Modeling to Predict the Frequency and Magnetic Field-Induced Properties of Magnetorheological Elastomer
  26. Experimental investigation of torsional vibration isolation using Magneto Rheological Elastomer
  27. Parametric Modeling and Real Time Remote Experimentation of a Reconfigurable Coupled Pendulum
  28. Sensor Fusion for Operational Mode Shape Analysis of Multi DoF Systems
  29. Experimental investigation on the effect of carbon nanotube additive on the field-induced viscoelastic properties of magnetorheological elastomer
  30. Aileron endurance test rig design based on high fidelity mathematical modeling
  31. Engine gearbox fault diagnosis using empirical mode decomposition method and Naïve Bayes algorithm
  32. Design and development of magneto-rheological brake for optimum casing thickness
  33. Bending and free vibration analysis of foam-filled truss core sandwich panel
  34. Sound transmission loss characteristics of sandwich aircraft panels: Influence of nature of core
  35. force transmissibility characteristics of magnetorheological elastomer
  36. Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings: Effect of inherent material damping
  37. Dynamic blocked transfer stiffness method of characterizing the magnetic field and frequency dependent dynamic viscoelastic properties of MRE
  38. Experimental investigation on the effect of magnetic field on strain dependent dynamic stiffness of magnetorheological elastomer
  39. Active vibration control real time
  40. Evaluation of Flow Properties of Air at the Exit of Holes on the Blow Pipe in a Pulse Jet Filter Bag House
  41. Influence of nature of core on vibro acoustic behavior of sandwich aerospace structures
  42. An adoption model describing clinician’s acceptance of automated diagnostic system for tuberculosis
  43. Magnetic field and frequency dependent LVE limit characterization of magnetorheological elastomer
  44. Optimization of Magneto-Rheological Damper for Maximizing Magnetic Flux Density in the Fluid Flow Gap Through FEA and GA Approaches
  45. Vertical dynamic analysis of a quarter car suspension system with MR damper
  46. Effect of Core Topology on Vibro-acoustic Characteristics of Truss Core Sandwich Panels
  47. Model based test equipment design and controller tuning for elevator endurance test rig
  48. Design and development of a model free robust controller for active control of dominant flexural modes of vibrations in a smart system
  49. Fault Detection of Gear Using Spectrum and Cepstrum Analysis
  50. Fault diagnosis of gears through discrete wavelet features based on a decision tree and support vector machine
  51. A novel approach to investigate effect of magnetic field on dynamic properties of natural rubber based isotropic thick magnetorheological elastomers in shear mode
  52. Modeling and design of field programmable gate array based real time robust controller for active control of vibrating smart system
  53. Fabrication of Functionally Graded Carbon Nanotube-Reinforced Aluminium Matrix Laminate by Mechanical Powder Metallurgy Technique - Part I
  54. Analysis of MR Damper Based on Finite Element Approach
  55. Comparative Study on MSMA Actuation under Electromagnetic and biased-Magnetic Fields
  56. 10.1007/s40032-016-0251-z
  57. Functionally Graded Composite Materials: An Overview
  58. Gear Fault Detection Using Vibration Analysis and Continuous Wavelet Transform
  59. Experimental Study of Damping Characteristics of Air, Silicon Oil, Magneto Rheological Fluid on Twin Tube Damper
  60. Vibration Control of Smart Cantilever Beam Using Strain Rate Feedback
  61. Design and Implementation of Remote Mechatronics Laboratory for e-Learning Using LabVIEW and Smartphone and Cross-platform Communication Toolkit (SCCT)
  62. Experimental Investigation of Effect of Ingredient Particle Size on Dynamic Damping of RTV Silicone Base Magnetorheological Elastomers
  63. Active vibration control of a smart cantilever beam at resonance: A comparison between conventional and Real Time Control
  64. Computer Interface to Accurately Determine Fermi Energy and Fermi Temperature of Materials
  65. Machining Characteristics Of Nanocomposites
  66. FPGA Based Vibration Control of a Mass Varying Two-Degree of Freedom System
  67. Investigation on feasibility of recurrence quantification analysis for detecting flank wear in face milling
  68. Fabrication and Investigation of Damping Properties of Nano Particulate Composites
  69. 10.1016/j.mspro.2014.07.492
  70. Statistical modeling of a magneto-rheological fluid damper using the design of experiments approach
  71. Dynamic response of railroad vehicle to rail joints and average vertical profile: a time domain approach