All Stories

  1. High-efficiency ternary layer-by-layer all-polymer solar cells enabled by a dual-donor alloy strategy
  2. Photomultiplication type quasi-planar all-polymer photodetectors with tunable response range
  3. Recent progress in all-small-molecule organic photovoltaics
  4. Two Y6 Derivations with Similar Chemical Structure As One Alloyed Acceptor Enable Efficient Ternary-Blend Polymer Solar Cells
  5. In Operando Visualization of Interfacial Band Bending in Photomultiplying Organic Photodetectors
  6. Narrowband Photomultiplication Organic Photodetectors by Employing Phosphorescent Material as Optical Field Adjusting Layer
  7. Highly Sensitive Narrowband Photomultiplication‐Type Organic Photodetectors Prepared by Transfer‐Printed Technology
  8. Two-Pronged Effect of Warm Solution and Solvent-Vapor Annealing for Efficient and Stable All-Small-Molecule Organic Solar Cells
  9. Smart Strategy: Transparent Hole-Transporting Polymer as a Regulator to Optimize Photomultiplication-type Polymer Photodetectors
  10. Ternary‐organic photovoltaics with J71 as donor and two compatible nonfullerene acceptors
  11. Broadband photomultiplication organic photodetectors
  12. Highly sensitive all-polymer photodetectors with ultraviolet-visible to near-infrared photo-detection and their application as an optical switch
  13. Highly sensitive, broad-band organic photomultiplication-type photodetectors covering UV-Vis-NIR
  14. Natural biomaterial sarcosine as an interfacial layer enables inverted organic solar cells to exhibit over 16.4% efficiency
  15. Organic photovoltaics with 300 nm thick ternary active layers exhibiting 15.6% efficiency
  16. Rational compatibility in a ternary matrix enables all-small-molecule organic solar cells with over 16% efficiency
  17. Semitransparent organic solar cells exhibiting 13.02% efficiency and 20.2% average visible transmittance
  18. Ternary polymer solar cells with iridium-based polymer PM6Ir1 as a donor and N3:ITIC-Th as an acceptor exhibiting over 17.2% efficiency
  19. A critical review on semitransparent organic solar cells
  20. Recent Progress on Broadband Organic Photodetectors and their Applications
  21. A Critical Review on Efficient Thick‐Film Organic Solar Cells
  22. Review on smart strategies for achieving highly efficient ternary polymer solar cells
  23. Achieving 17.4% Efficiency of Ternary Organic Photovoltaics with Two Well‐Compatible Nonfullerene Acceptors for Minimizing Energy Loss
  24. Over 15.7% Efficiency of Ternary Organic Solar Cells by Employing Two Compatible Acceptors with Similar LUMO Levels
  25. Highly efficient quaternary organic photovoltaics by optimizing photogenerated exciton distribution and active layer morphology
  26. Novel Nitrogen-Containing Heterocyclic Non-Fullerene Acceptors for Organic PhotovoltaicCells: Different End-Capping Groups Leading to a Big Difference of Power Conversion Efficiencies
  27. An asymmetrical fused-ring electron acceptor designed by a cross-conceptual strategy achieving 15.6% efficiency
  28. Broadband organic photodetectors exhibiting photomultiplication with a narrow bandgap non-fullerene acceptor as an electron trap
  29. Charge density modulation on asymmetric fused-ring acceptors for high-efficiency photovoltaic solar cells
  30. Efficient ternary organic photovoltaics with two polymer donors by minimizing energy loss
  31. J71-based ternary organic photovoltaics exhibiting 13.65% efficiency
  32. Low-gap zinc porphyrin as an efficient dopant for photomultiplication type photodetectors
  33. Molecular engineering of acceptors to control aggregation for optimized nonfullerene solar cells
  34. Over 14.5% efficiency and 71.6% fill factor of ternary organic solar cells with 300 nm thick active layers
  35. Photomultiplication type organic photodetectors based on electron tunneling injection
  36. Two compatible polymer donors contribute synergistically for ternary organic solar cells with 17.53% efficiency
  37. Photomultiplication Type Broad Response Organic Photodetectors with One Absorber Layer and One Multiplication Layer
  38. Two Well‐Compatible Acceptors with Efficient Energy Transfer Enable Ternary Organic Photovoltaics Exhibiting a 13.36% Efficiency
  39. 13.26% Efficiency Polymer Solar Cells by Optimizing Photogenerated Exciton Distribution and Phase Separation with the Third Component
  40. Ternary organic photovoltaics with alloyed donor exhibiting 75.53% fill factor and 12.26% efficiency
  41. Photomultiplication type organic photodetectors with tunable spectral response range
  42. Inverted Ternary Organic Photovoltaics with Alloyed Acceptor Exhibiting 12.29% Efficiency
  43. A novel 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile end group for an efficient non-fullerene small molecule acceptor
  44. Acceptor-free photomultiplication-type organic photodetectors
  45. All-polymer photodetectors with photomultiplication
  46. Fluorene-fused ladder-type non-fullerene small molecule acceptors for high-performance polymer solar cells
  47. One key issue in characterization of organic solar cells with solution processed interfacial layers
  48. Recent progress on highly sensitive perovskite photodetectors
  49. Semitransparent polymer solar cells with 9.06% efficiency and 27.1% average visible transmittance obtained by employing a smart strategy
  50. Recent Progress on Photomultiplication Type Organic Photodetectors
  51. Efficient Ternary Organic Solar Cells with Two Compatible Non-Fullerene Materials as One Alloyed Acceptor
  52. Efficient Polymer Solar Cells with Open-Circuit Voltage of 1.01 V and Power Conversion Efficiency of 8.09%
  53. Improved photomultiplication in inverted-structure organic photodetectors via interfacial engineering
  54. Revisiting the Impact of Interfacial Transport Layers on Organic Bulk Heterojunction Systems
  55. Organic Photodetectors with Gain and Broadband/Narrowband Response under Top/Bottom Illumination Conditions
  56. Photomultiplication Type Organic Photodetectors with Broadband and Narrowband Response Ability
  57. Ternary Nonfullerene Polymer Solar Cells with a Power Conversion Efficiency of 11.6% by Inheriting the Advantages of Binary Cells
  58. Efficient Ternary Polymer Solar Cells with Two Well-Compatible Donors and One Ultranarrow Bandgap Nonfullerene Acceptor
  59. Designing an asymmetrical isomer to promote the LUMO energy level and molecular packing of a non-fullerene acceptor for polymer solar cells with 12.6% efficiency
  60. Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5%
  61. Energy level modulation of non-fullerene acceptors enables efficient organic solar cells with small energy loss
  62. High performance non-fullerene polymer solar cells based on PTB7-Th as the electron donor with 10.42% efficiency
  63. Simultaneously improved efficiency and average visible transmittance of semitransparent polymer solar cells with two ultra-narrow bandgap nonfullerene acceptors
  64. Ternary non-fullerene polymer solar cells with an efficiency of 11.6% by simultaneously optimizing photon harvesting and phase separation
  65. Ternary nonfullerene polymer solar cells with efficiency >13.7% by integrating the advantages of the materials and two binary cells
  66. Highly Sensitive Low‐Bandgap Perovskite Photodetectors with Response from Ultraviolet to the Near‐Infrared Region
  67. Highly Efficient Parallel-Like Ternary Organic Solar Cells
  68. Simultaneously Enhanced Efficiency and Stability of Polymer Solar Cells by Employing Solvent Additive and Upside-down Drying Method
  69. Highly Narrowband Photomultiplication Type Organic Photodetectors
  70. Cost-effective hole transporting material for stable and efficient perovskite solar cells with fill factors up to 82%
  71. A liquid crystal material as the third component for ternary polymer solar cells with an efficiency of 10.83% and enhanced stability
  72. Highly efficient polymer solar cells by step-by-step optimizing donor molecular packing and acceptor redistribution
  73. Nematic liquid crystal materials as a morphology regulator for ternary small molecule solar cells with power conversion efficiency exceeding 10%
  74. Photomultiplication type narrowband organic photodetectors working at forward and reverse bias
  75. Switch to Reader View Loading... a review for ternary organic solar cells
  76. Efficient ternary organic photovoltaic cells with better trade-off photon harvesting and phase separation by doping DIB-SQ
  77. Optimization of charge carrier transport balance for performance improvement of PDPP3T-based polymer solar cells prepared using a hot solution
  78. Highly sensitive polymer photodetectors with a broad spectral response range from UV light to the near infrared region
  79. Efficient small molecular ternary solar cells by synergistically optimized photon harvesting and phase separation
  80. A two-step strategy to clarify the roles of a solution processed PFN interfacial layer in highly efficient polymer solar cells
  81. Unique insight into phase separation in polymer solar cells from their electric characteristics
  82. Revealing the working mechanism of polymer photodetectors with ultra-high external quantum efficiency
  83. Efficient ternary polymer solar cells with a parallel-linkage structure
  84. Enhanced performance of polymer solar cells by employing a ternary cascade energy structure
  85. Tuning nanoscale morphology using mixed solvents and solvent vapor treatment for high performance polymer solar cells
  86. Interfacial layer for efficiency improvement of solution-processed small molecular solar cells
  87. Enhanced performance of polymer solar cells through sensitization by a narrow band gap polymer
  88. Organic ultraviolet photodetector based on phosphorescent material
  89. Organic Photovoltaic Cells Based on PbPc Nanocolumns Prepared by Glancing Angle Deposition
  90. Emission colour-tunable phosphorescent organic light-emitting diodes based on the self-absorption effect and excimer emission
  91. Recent progress in the design of narrow bandgap conjugated polymers for high-efficiency organic solar cells
  92. High efficient inverted polymer solar cells with different annealing treatment
  93. Luminescent and photovoltaic properties of poly(9,9-dioctylfluorene-co-bithiophene) in organic electronic devices
  94. Influence of PC60BM or PC70BM as electron acceptor on the performance of polymer solar cells
  95. Luminescence Characteristics of Blue Emission Phosphorescent Material Firpic
  96. Recent development of the inverted configuration organic solar cells
  97. Efficiency improvement of polymer solar cells by iodine doping
  98. Recent development of conjugated oligomers for high-efficiency bulk-heterojunction solar cells
  99. Inverted small molecule organic solar cells with Ca modified ITO as cathode and MoO3 modified Ag as anode
  100. Effect of an Ultra-thin Molybdenum Trioxide Layer and Illumination Intensity on the Performance of Organic Photovoltaic Devices †
  101. Improved performance of organic light emitting diodes by pentacene as hole transporting layer
  102. Energy level alignment and morphology of interfaces between molecular and polymeric organic semiconductors
  103. Influence of evaporation conditions of Alq 3 on the performance of organic light emitting diodes
  104. Synthesis and characteristics of a novel rare earth complex of Eu(TTA)2(N-HPA)Phen