All Stories

  1. Development of actuation system for artificial cilia with magnetic elastomer

    Article • Japanese Journal of Applied Physics, May 2015, Japan Society of Applied Physics

    Professor Fujio Tsumori

  2. Formation of ceramic micro-channel by combination of laser beam machining and micro powder imprinting

    Article • Japanese Journal of Applied Physics, May 2015, Japan Society of Applied Physics

    Professor Fujio Tsumori

  3. 原料粉末粒度分布制御によるMIM 大形複雑形状品の変形抑制

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2015, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  4. Hierarchical patterning by multi-step micro-imprinting with layered materials

    Article • Manufacturing Review, January 2015, EDP Sciences

    Professor Fujio Tsumori

  5. 粉末プロセスを用いたセラミックス薄層への微細加工

    Article • Journal of the Japan Society for Technology of Plasticity, January 2015, The Japan Society for Technology and Plasticity

    Professor Fujio Tsumori

  6. Development of improved solid oxide fuel cell electrolyte sheet by microimprinting for layered material

    Article • Japanese Journal of Applied Physics, May 2014, Japan Society of Applied Physics

    Professor Fujio Tsumori

  7. Development of Power Generation Device Using Inverse Magnetostriction Effect of Elastomer Material Dispersed with Magnetic Powder

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2014, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  8. 粉末冶金とレーザ加工の複合プロセスによるセラミックシート上への微細パターンの形成

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2014, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  9. Micrometer-scale Imprinting Process for Ceramic Sheet from Powder Compound Material

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Fujio Tsumori

  10. Improvement of solid oxide fuel cell by imprinted micropatterns on electrolyte

    Article • Micro & Nano Letters, October 2013, the Institution of Engineering and Technology (the IET)

    Professor Fujio Tsumori

  11. Direct Laser Forming for More Complex Shaped Titanium Alloy Compacts

    Article • September 2013, Wiley

    Professor Fujio Tsumori

  12. Magneto-FEM analysis for micro actuator using array of magnetic elements

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Fujio Tsumori

  13. Improvement of Solid Oxide Fuel Cell by imprinted patterns on eelectrolyte

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Fujio Tsumori

  14. MIM によるNi 基超合金René95 の疲労特性向上

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2013, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  15. Evaluation and Analysis of Distortion of Complex Shaped Ti-6Al-4V Compacts by Metal Injection Molding Process

    Article • Key Engineering Materials, August 2012, Trans Tech Publications

    Professor Fujio Tsumori

  16. Magnetic Micro Actuator Using Interactive Force between Magnetic Elements

    Article • Japanese Journal of Applied Physics, June 2012, Japan Society of Applied Physics

    Professor Fujio Tsumori

  17. Study on Fabrication of Micrometer Patterned Ceramic Sheet with Micro Powder Imprinting (μPI) Method

    Article • Advanced Science Letters, June 2012, American Scientific Publishers

    Professor Fujio Tsumori

  18. Magnetic Micro Actuator Using Interactive Force between Magnetic Elements

    Article • Japanese Journal of Applied Physics, June 2012, Japan Society of Applied Physics

    Professor Fujio Tsumori

  19. Effect of MIM Processing Parameters on the Properties of 440C Stainless Steel

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2012, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  20. Investigation of Fine Heterogeneous Microstructure on the Mechanical Properties of MIM Fe-Ni Alloy Steels

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2012, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  21. Evaluation and Analysis of Distortion during MIM Process of Titanium Alloy Materials -2nd Report-

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2012, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  22. 高Ni焼結合金鋼におけるメゾへテロ組織及び転造の面圧疲労強度に及ぼす影響

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2012, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  23. Effects of Resist Thickness and Viscoelasticity on the Cavity Filling Capability in Bilayer Thermal Embossing

    Article • Japanese Journal of Applied Physics, June 2011, Japan Society of Applied Physics

    Professor Fujio Tsumori

  24. Effects of Resist Thickness and Viscoelasticity on the Cavity Filling Capability in Bilayer Thermal Embossing

    Article • Japanese Journal of Applied Physics, June 2011, Japan Society of Applied Physics

    Professor Fujio Tsumori

  25. Fatigue Properties of Ti Alloy Compacts by Metal Injection Molding - Part1

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2011, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  26. Fabrication of Micro Patterned Ceramic Structure by Imprinting Process

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2011, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  27. Fatigue Failure Properties of Injection Molded Superalloy Compacts

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2011, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  28. Effect of Mezzo-Heterogeneous Microstructure and Rolling on the Tooth Root Bending Fatigue Properties of Sintered Ni Alloy Steel Gears

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2011, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  29. Fabrication of Super-Elastic Ti-10V-2Fe-3Al Alloy Compacts by MIM Process

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2011, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  30. Fabrication of Porous Structured WC-Co Alloy Compacts by Indirect Laser Forming

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2011, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  31. Improvement of Surface Densification and Fatigue Strength by Tooth Root Rolling of Sintered Ferrous Alloy Gear Added Mo

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2011, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  32. Laser Forming of Ti-6Al-7Nb Alloy Powder Compacts for Medical Devices

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Fujio Tsumori

  33. Effect of Powder Type on the Rolling Contact Fatigue Strength of 4600 Sintered Alloy Steels

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2010, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  34. Development of High Precision and Strength Sintered Ferrous Alloy Gear by Rolling -3rd Report-

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2010, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  35. The Control Method of Porous Structure for Density Gradient Materials in Direct Metal Laser Sintering (DMLS)

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2010, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  36. Improvement of the Contact Fatigue Strength by Rolling of Sintered Ferrous Alloy Roller -2nd Report-

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2010, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  37. Development of Micro Actuator using Magnetic Powder and Elastic Material (Second Report)-Development of Simulation and Design System-

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2009, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  38. Development of Micro Actuator using Magnetic Powder and Elastic Material (First Report)-Theoretical Formulation of Magnetic Force Applied to Micro Particle-

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2009, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  39. Fast Contact Detection Method for Discrete Element Method using Non-Spherical Particles

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2009, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  40. Micro Fabrication Process of Powder Compact with Semi-Solid Mold

    Article • January 2007, CrossRef Test Account

    Professor Fujio Tsumori

  41. Micro Fabrication Process of Powder Compact with Semi-Solid Mold

    Article • Materials Science Forum, January 2007, Trans Tech Publications

    Professor Fujio Tsumori

  42. 温度制御を利用した半固形モールド粉体成形法の開発

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2006, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  43. Fabrication of Micro Structure with Complicated Shape by Temperature Controlled Semi-solid Mold Isostatic Powder Compaction

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2006, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  44. 粒子間付着力を考慮した個別要素法による粒子挙動の解析（第一報）―二次元モデルによる解析―

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2006, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  45. 粒子間付着力を考慮した個別要素法による粒子挙動の解析（第二報）―三次元モデルによる解析およびモデル実験―

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2006, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  46. Simulation of Powder Behavior in Applied Magnetic Field by Coupled FEM-DEM Modeling

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2005, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  47. 磁場中粉体成形における粉末流動のキャビティ形状による影響

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2005, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  48. 半固形モールド粉体成形法の開発

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2005, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  49. Fabrication and Simulation of Thin Sheets by Bingham semi-solid/fluid Isostatic Powder Compaction Process

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2005, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  50. Macro–micro modeling for coupled elasto–creep and thermal analyses under sintering

    Article • Materials Science and Engineering A, June 2000, Elsevier

    Professor Fujio Tsumori

  51. Coupled-Multilevel Modeling for Hot Deformation and Sintering

    Article • Key Engineering Materials, April 2000, Trans Tech Publications

    Professor Fujio Tsumori

  52. Evaluation of Pressurizing Effects on the Sintering Process by Coupled Macro-micro Modeling.

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 1996, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori

  53. 粒状体モデルによる焼結解析

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 1995, Japan Society of Powder and Powder Metallurgy

    Professor Fujio Tsumori