All Stories

  1. Influence of Build-Plate Position and Sequential Printing on the Colour Fidelity of Vat-Photopolymerised Microhybrid Resins

    Article • August 2026, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  2. Influence of Build-Plate Position and Sequential Printing on the Colour Fidelity of Vat-Photopolymerised Microhybrid Resins

    Article • August 2026, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  3. ATR-FTIR assessment of degree of conversion across curing-state transitions in Bis-EMA- and UDMA-based microfilled dental resins for additive manufacturing

    Article • Journal of Materials Science Materials in Medicine, July 2026, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  4. ATR-FTIR Assessment of Degree of Conversion Across Curing-State Transitions in Bis-EMA- and UDMA-Based Microfilled Dental Resins for Additive Manufacturing

    Article • April 2026, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  5. A Novel Technique for Designing and Manufacturing Complete Mandibular Dentures with Resilient Linings Using Additive Manufacturing

    Article • The International Journal of Prosthodontics, November 2025, Quintessence Publishing

    Dr Frank Alifui-Segbaya

  6. Intaglio surface of CNC milled versus 3D printed maxillary complete denture bases – An in vitro investigation of the accuracy of seven systems

    Article • Journal of Dentistry, December 2024, Elsevier

    Dr Frank Alifui-Segbaya

  7. Functionally Graded Metamaterials: Fabrication Techniques, Modeling, and Applications—A Review

    Article • Processes, October 2024, MDPI AG

    Dr Frank Alifui-Segbaya

  8. Material extrusion of thermoplastic acrylic for intraoral devices: Technical feasibility and evaluation

    Article • Journal of the Mechanical Behavior of Biomedical Materials, June 2023, Elsevier

    Dr Frank Alifui-Segbaya, A/Prof Khaled E Ahmed

  9. 3D Printed Materials Dentistry

    Article • March 2023, MDPI AG

    Dr Frank Alifui-Segbaya

  10. Assessing the Impact of Resin Type, Post-Processing Technique, and Arch Location on the Trueness and Precision of 3D-Printed Full-Arch Implant Surgical Guides

    Article • Applied Sciences, February 2023, MDPI AG

    Dr Frank Alifui-Segbaya, A/Prof Khaled E Ahmed

  11. Composites (Fiber-Reinforced Plastic Matrix Composites)

    Article • January 2023, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  12. Environmental Health and Safety II

    Article • January 2023, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  13. Material Extrusion of Thermoplastic Acrylic for Intraoral Devices: Technical Feasibility and Evaluation

    Article • January 2023, Elsevier

    Dr Frank Alifui-Segbaya

  14. Opportunities and Limitations of Additive Manufacturing

    Article • January 2023, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  15. The Effect of Stacking on the Accuracy of 3D-Printed Full-Arch Dental Models

    Article • Polymers, December 2022, MDPI AG

    Dr Frank Alifui-Segbaya, A/Prof Khaled E Ahmed

  16. Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

    Article • Journal of Manufacturing and Materials Processing, December 2021, MDPI AG

    Dr Frank Alifui-Segbaya

  17. Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

    Article • November 2021, MDPI AG

    Dr Frank Alifui-Segbaya

  18. Hierarchical homogenization and experimental evaluation of functionally graded materials manufactured by the fused filament fabrication process

    Article • Composite Structures, November 2021, Elsevier

    Dr Frank Alifui-Segbaya

  19. A Proposed In Vitro Methodology for Assessing the Accuracy of Three-Dimensionally Printed Dental Models and the Impact of Storage on Dimensional Stability

    Article • Applied Sciences, June 2021, MDPI AG

    Dr Frank Alifui-Segbaya, A/Prof Khaled E Ahmed

  20. Accuracy of 3-Dimensionally Printed Full-Arch Dental Models: A Systematic Review

    Article • Journal of Clinical Medicine, October 2020, MDPI AG

    Dr Frank Alifui-Segbaya, A/Prof Khaled E Ahmed

  21. Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion

    Article • Inventions, August 2020, MDPI AG

    Dr Frank Alifui-Segbaya

  22. Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion

    Article • August 2020, MDPI AG

    Dr Frank Alifui-Segbaya

  23. Biomedical photopolymers in 3D printing

    Article • Rapid Prototyping Journal, November 2019, Emerald

    Dr Frank Alifui-Segbaya

  24. Chemical composition and degradation products in additively manufactured methacrylates for dental devices

    Article • Additive Manufacturing, November 2019, Elsevier

    Dr Frank Alifui-Segbaya

  25. The trends and challenges of fiber reinforced additive manufacturing

    Article • The International Journal of Advanced Manufacturing Technology, January 2019, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  26. Australian Dental Research Foundation Special Research Supplement 2018

    Article • Australian Dental Journal, November 2018, Wiley

    Dr Frank Alifui-Segbaya

  27. Additive Manufacturing of Cobalt-Based Dental Alloys: Analysis of Microstructure and Physicomechanical Properties

    Article • Advances in Materials Science and Engineering, November 2018, Hindawi Publishing Corporation

    Dr Frank Alifui-Segbaya, Markus Merkel

  28. Toxicological assessment of additively manufactured methacrylates for medical devices in dentistry

    Article • Acta Biomaterialia, September 2018, Elsevier

    Dr Frank Alifui-Segbaya

  29. Biocompatibility of 3D-Printed Methacrylate for Hearing Devices

    Article • Inventions, July 2018, MDPI AG

    Dr Frank Alifui-Segbaya

  30. Biocompatibility of 3D Printed Methacrylate for Hearing Aids and Inner Ear Devices

    Article • July 2018, MDPI AG

    Dr Frank Alifui-Segbaya

  31. Biocompatibility of 3D Printed Methacrylate for Hearing Aids and Inner Ear Devices

    Article • July 2018, MDPI AG

    Dr Frank Alifui-Segbaya

  32. Biocompatibility of Photopolymers in 3D Printing

    Article • 3D Printing and Additive Manufacturing, December 2017, Mary Ann Liebert Inc

    Dr Frank Alifui-Segbaya

  33. In vitro corrosion analyses of heat treated cobalt-chromium alloys manufactured by direct metal laser sintering

    Article • Rapid Prototyping Journal, January 2015, Emerald

    Dr Frank Alifui-Segbaya

  34. Clinical Relevance of Laser-Sintered Co-Cr Alloys for Prosthodontic Treatments: A Review

    Article • January 2014, Research Publishing Services

    Dr Frank Alifui-Segbaya

  35. The corrosive effects of artificial saliva on cast and rapid manufacture‐produced cobalt chromium alloys

    Article • Rapid Prototyping Journal, March 2013, Emerald

    Dr Frank Alifui-Segbaya