All Stories

  1. Tailored porosity in additive manufacturing of 7075 aluminum alloy for crack suppression and high strength

    Article • Journal of Materials Processing Technology, December 2024, Elsevier

    Fern Ng

  2. Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

    Article • International Journal of Minerals Metallurgy and Materials, November 2024, Springer Science + Business Media

    Fern Ng

  3. EBSD Method for Measuring Wafer Off-cut Angle

    Article • July 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Fern Ng

  4. Extending the mechanical property regime of laser powder bed fusion Sc- and Zr-modified Al6061 alloy by manipulating process parameters and heat treatment

    Article • Additive Manufacturing, April 2024, Elsevier

    Fern Ng

  5. Process Development, Microstructure and Electrical Resistance on Green Laser Induced Graphene from Polyimide

    Article • December 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Fern Ng

  6. Machine Learning Customized Novel Material for Energy‐Efficient 4D Printing

    Article • Advanced Science, February 2023, Wiley

    Fern Ng

  7. Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying

    Article • Composites Part B Engineering, January 2023, Elsevier

    Fern Ng

  8. Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion

    Article • Journal of Alloys and Compounds, December 2022, Elsevier

    Fern Ng

  9. Revealing mechanisms underlying powder reusability of Ti-48Al-2Cr-2Nb intermetallic in electron beam powder bed fusion process

    Article • Additive Manufacturing, November 2022, Elsevier

    Fern Ng

  10. Towards the mechanism of in situ welding during electron beam powder bed fusion process

    Article • Materials Science and Engineering A, November 2022, Elsevier

    Fern Ng

  11. Additive manufacturing of voxelized heterostructured materials with hierarchical phases

    Article • Additive Manufacturing, June 2022, Elsevier

    Fern Ng

  12. Tailoring the microstructure and mechanical property of laser powder bed fusion fabricated Ti–6Al–2Sn–4Zr–2Mo via heat treatment

    Article • Journal of Alloys and Compounds, February 2022, Elsevier

    Fern Ng

  13. Enhanced corrosion resistance of laser aided additive manufactured CoCrNi medium entropy alloys with oxide inclusion

    Article • Corrosion Science, February 2022, Elsevier

    Fern Ng

  14. Selective laser melting of micron-sized niobium functionalized Al7075 alloy: Element evaporation and grain refinement

    Article • Materials Science and Engineering A, February 2022, Elsevier

    Fern Ng

  15. Method to maximize the productivity of laser powder bed fusion systems through dimensionless parameters

    Article • Journal of Laser Applications, January 2022, Laser Institute of America

    Fern Ng

  16. Additive Manufacturing of Spatially Configurable Heterostructured Materials

    Article • January 2022, Research Publishing Services

    Fern Ng

  17. Laser aided additive manufacturing of spatially heterostructured steels

    Article • International Journal of Machine Tools and Manufacture, January 2022, Elsevier

    Fern Ng

  18. Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation

    Article • Materials Today, January 2022, Elsevier

    Fern Ng

  19. Effects of laser pulse modulation on intermetallic compounds formation for welding of Ti-6Al-4V and AA7075 using AA4047 filler

    Article • Materials & Design, January 2022, Elsevier

    Fern Ng

  20. Powder Reusability of Ti-48Al-2Cr-2Nb Intermetallic in Electron Beam Powder Bed Fusion Process

    Article • January 2022, Research Publishing Services

    Fern Ng

  21. The Effect of Hot Forging on the Mechanical Properties of Additive Manufactured 7075 Aluminium Alloy Preform through Crack Closure

    Article • January 2022, Research Publishing Services

    Fern Ng

  22. Additive manufacturing of high-entropy alloys by thermophysical calculations and in situ alloying

    Article • Journal of Material Science and Technology, December 2021, Elsevier

    Fern Ng

  23. High-density WC–45Cr–18Ni cemented hard metal fabricated with binder jetting additive manufacturing

    Article • Virtual and Physical Prototyping, November 2021, Taylor & Francis

    Fern Ng

  24. Thermo-metallurgical simulation and performance evaluation of hybrid laser arc welding of chromium-molybdenum steel

    Article • Materials & Design, November 2021, Elsevier

    Fern Ng

  25. Superior strength-ductility in laser aided additive manufactured high-strength steel by combination of intrinsic tempering and heat treatment

    Article • Virtual and Physical Prototyping, July 2021, Taylor & Francis

    Fern Ng

  26. Influence of oxides on the cryogenic tensile properties of the laser aided additive manufactured CoCrNi medium entropy alloy

    Article • Composites Part B Engineering, July 2021, Elsevier

    Fern Ng

  27. Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

    Article • Journal of Material Science and Technology, June 2021, Elsevier

    Fern Ng

  28. Additive manufacturing of multi-scale heterostructured high-strength steels

    Article • Materials Research Letters, March 2021, Taylor & Francis

    Fern Ng

  29. Hybrid manufacturing of γ-TiAl and Ti–6Al–4V bimetal component with enhanced strength using electron beam melting

    Article • Composites Part B Engineering, February 2021, Elsevier

    Fern Ng

  30. Enhanced strength–ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel

    Article • Additive Manufacturing, October 2020, Elsevier

    Fern Ng

  31. Excellent combination of strength and ductility of CoCrNi medium entropy alloy fabricated by laser aided additive manufacturing

    Article • Additive Manufacturing, August 2020, Elsevier

    Fern Ng

  32. IN100 Ni-based superalloy fabricated by micro-laser aided additive manufacturing: Correlation of the microstructure and fracture mechanism

    Article • Materials Science and Engineering A, June 2020, Elsevier

    Fern Ng

  33. Double-side friction stir welding of thick magnesium alloy: microstructure and mechanical properties

    Article • Science and Technology of Welding & Joining, January 2020, Taylor & Francis

    Fern Ng

  34. Hybrid laser-TIG welding of dissimilar ferrous steels: 10 mm thick low carbon steel to 304 austenitic stainless steel

    Article • Journal of Manufacturing Processes, November 2019, Elsevier

    Fern Ng

  35. Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy

    Article • Materials Research Letters, August 2019, Taylor & Francis

    Dr Zhiming Li, Jun Wei, Fern Ng

  36. Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder

    Article • Materials & Design, April 2019, Elsevier

    Fern Ng

  37. Gradient hierarchical grain structures of Al0.1CoCrFeNi high-entropy alloys through dynamic torsion

    Article • Materials Letters, March 2019, Elsevier

    Fern Ng

  38. High mechanical strengths and ductility of stainless steel 304L fabricated using selective laser melting

    Article • Journal of Material Science and Technology, February 2019, Elsevier

    Fern Ng

  39. Interplay between microstructure and deformation behavior of a laser-welded CoCrFeNi high entropy alloy

    Article • Materials Research Express, January 2019, Institute of Physics Publishing

    Fern Ng

  40. Microstructure and enhanced strength of laser aided additive manufactured CoCrFeNiMn high entropy alloy

    Article • Materials Science and Engineering A, January 2019, Elsevier

    Fern Ng

  41. Process study and characterization of properties of FerCrNiMnCo high-entropy alloys fabricated by laser-aided additive manufacturing

    Article • November 2018, SPIE

    Fern Ng

  42. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting

    Article • Scripta Materialia, September 2018, Elsevier

    Fern Ng

  43. Oxidation behaviour of CrAlYN coatings at elevated temperatures

    Article • Surface and Coatings Technology, June 2017, Elsevier

    Fern Ng

  44. Microstructure Stability of a Fine-Grained AZ31 Magnesium Alloy Processed by Constrained Groove Pressing During Isothermal Annealing

    Article • Journal of Manufacturing Science and Engineering, May 2017, ASME International

    Fern Ng

  45. Understanding non-parabolic solidification kinetics in Ni-based alloys during TLP bonding via thermo-kinetic modelling

    Article • Journal of Alloys and Compounds, March 2017, Elsevier

    Fern Ng

  46. Evaluation of Corrosion Protection Performance of Zinc Coatings and Failure Mechanisms

    Article • ECS Meeting Abstracts, September 2016, The Electrochemical Society

    Fern Ng

  47. Temperature cycling aging studies of Zn-based solders for high-temperature applications

    Article • December 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Fern Ng

  48. Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing

    Article • Materials & Design (1980-2015), August 2014, Elsevier

    Fern Ng

  49. Effects of CNTs on microstructure and hardness of laser welds of the CNT-reinforced magnesium composite

    Article • Composites Part A Applied Science and Manufacturing, May 2013, Elsevier

    Fern Ng

  50. Controlling porous properties of polymer monoliths synthesized by photoinitiated polymerization

    Article • Polymer International, November 2012, Wiley

    Fern Ng

  51. Effect of porogenic solvent on the porous properties of polymer monoliths

    Article • Journal of Applied Polymer Science, May 2012, Wiley

    Fern Ng

  52. Development of porous polymer monolith by photoinitiated polymerization

    Article • Journal of Applied Polymer Science, February 2011, Wiley

    Fern Ng

  53. UV curing kinetic of high performance epoxy resin for Roll-to-Roll UV embossing

    Article • December 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Fern Ng

  54. Micro Machining of Metal Injection Mould with Micro Channel Features of Tens Micro Meters for Polymer Microfluidic Devices Manufacturing

    Article • Key Engineering Materials, September 2010, Trans Tech Publications

    Fern Ng

  55. Feasibility Study on Producing Components with Embedded Channel by Powder Injection Moulding

    Article • Key Engineering Materials, September 2010, Trans Tech Publications

    Fern Ng

  56. Investigations on the structure, composition and performance of nanocrystalline thin film thermocouples deposited using anodic vacuum arc

    Article • Thin Solid Films, August 2010, Elsevier

    Fern Ng

  57. Spectroscopic ellipsometry study of thin film thermo-optical properties

    Article • Thin Solid Films, July 2009, Elsevier

    Fern Ng

  58. Characterisation of micro gears produced by micro powder injection moulding

    Article • Powder Technology, January 2009, Elsevier

    Fern Ng

  59. The influence of solder volume and pad area on Sn–3.8Ag–0.7Cu and Ni UBM reaction in reflow soldering and isothermal aging

    Article • Microelectronics Reliability, April 2008, Elsevier

    Fern Ng

  60. Microstructure of eutectic 80Au/20Sn solder joint in laser diode package

    Article • Microelectronic Engineering, March 2008, Elsevier

    Fern Ng

  61. Metallic thin film depth measurements by X-ray microanalysis

    Article • Applied Surface Science, March 2006, Elsevier

    Fern Ng

  62. Inspection and Image Analysis of Nickel Sulphide Inclusions in Toughened Glass Panels

    Article • January 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Fern Ng

  63. Femtosecond pulsed laser-induced periodic surface structures on GaN/sapphire

    Article • Applied Surface Science, December 2005, Elsevier

    Fern Ng

  64. SUBWAVELENGTH PERIODIC RIPPLE FORMATION ON GaN SURFACE BY FEMTOSECOND LASER PULSES

    Article • Surface Review and Letters, August 2005, World Scientific Pub Co Pte Lt

    Fern Ng

  65. Femtosecond pulse laser ablation of sapphire in ambient air

    Article • Applied Surface Science, April 2004, Elsevier

    Fern Ng

  66. WAFER BONDING PROCESS BASED ON THE TAGUCHI ANALYSIS

    Article • International Journal of Computational Engineering Science, June 2003, World Scientific Pub Co Pte Lt

    Fern Ng

  67. Role of bonding temperature and voltage in silicon-to-glass anodic bonding

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Fern Ng

  68. Influence of Solder Volume on Interfacial Reaction between Sn-Ag-Cu Solder and TiW/Cu/Ni UBM

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Fern Ng