All Stories

  1. Characterizing the aging of asphaltic materials through the evolution of continuous relaxation spectrum
  2. Applying asphalt binder modifier in reducing moisture-induced damage of asphalt mixtures
  3. Nonlinear genetic-base models for prediction of fatigue life of modified asphalt mixtures by precipitated calcium carbonate
  4. Effect of liquid silane-based anti-stripping additives on rheological properties of asphalt binder and hot mix asphalt moisture sensitivity
  5. Time-Temperature-Age Superposition Validation for Linear Viscoelastic Properties of Bituminous Materials
  6. Evaluation of pavement surface drainage using an automated image acquisition and processing system
  7. An investigation on the effect of SBS+Vacuum bottoms residue modification on rheological characteristics of asphalt binder
  8. Evaluation of the effective parameters on shear resistance of interface in a geocomposite-reinforced pavement
  9. Evaluation of geocomposite-reinforced bituminous pavements with Amirkabir University Shear Field Test
  10. Evaluation of shear bonding and reflective crack propagation in a geocomposite reinforced overlay
  11. Effect of cross-linkers on the performance of polyethylene-modified asphalt binders
  12. Investigating the mechanical and fatigue properties of sustainable cement emulsified asphalt mortar
  13. The effects of base binder and styrene–butadiene–styrene structure on rutting resistance of polymer–nanocomposite asphalt mixture
  14. Solar pavement: A new emerging technology
  15. An Overview of Multiresolution Analysis for Nondestructive Evaluation of Pavement Surface Drainage
  16. Thermal and rheological properties of nanoparticle modified asphalt binder at low and intermediate temperature range
  17. Effective parameters on interface failure in a geocomposite reinforced multilayered asphalt system
  18. A new method to determine maintenance and repair activities at network-level pavement management using falling weight deflectometer
  19. Lane-based car-following behaviour based on inductive loops
  20. Evaluating the Effect of Mix Design and Thermodynamic Parameters on Moisture Sensitivity of Hot Mix Asphalt
  21. Evaluating the Effects of Using Recycled Asphalt Pavements on Fatigue Properties of Warm Mix Asphalt
  22. Influence of Tire-Derived Aggregates on the Properties of Railway Ballast Material
  23. Investigation of rutting performance of asphalt binders containing warm additive
  24. Nanomaterial and fatigue cracking of hot mix asphalt
  25. Rahbin: A quadcopter unmanned aerial vehicle based on a systematic image processing approach toward an automated asphalt pavement inspection
  26. Hybrid PSO and GA approach for optimizing surveyed asphalt pavement inspection units in massive network
  27. Automatic image acquisition with knowledge-based approach for multi-directional determination of skid resistance of pavements
  28. Using the Surface Free Energy Method to Evaluate the Effects of Nanomaterial on the Fatigue Life of Hot Mix Asphalt
  29. Image Based Techniques for Crack Detection, Classification and Quantification in Asphalt Pavement: A Review
  30. Evaluation of the effect of nano-TiO2 on the adhesion between aggregate and asphalt binder in hot mix asphalt
  31. A statistical analysis on the mechanical properties of nanocomposite modified asphalt mixtures
  32. The influence of cohesion and adhesion parameters on the fatigue life of hot mix asphalt
  33. Statistical-experimental study of geosynthetics performance on reflection cracking phenomenon
  34. Rheological properties of bitumen modified with a combination of FT paraffin wax (sasobit®) and other additives
  35. Physiochemical, Rheological, and Oxidative Aging Characteristics of Asphalt Binder in the Presence of Mesoporous Silica Nanoparticles
  36. The employment of thermodynamic and mechanical methods to evaluate the impact of nanomaterials on moisture damage of HMA
  37. Pavement Friction and Skid Resistance Measurement Methods: A Literature Review
  38. Predicting the tensile relaxation modulus of asphalt mixes based on the mix design and environmental factors
  39. Evaluation of Healing Potential in Unmodified and SBS-Modified Asphalt Mixtures Using a Dissipated-Energy Approach
  40. Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures
  41. Use of aggregate nanocoating to decrease moisture damage of hot mix asphalt
  42. Nanoclay application to asphalt concrete: Characterization of polymer and linear nanocomposite-modified asphalt binder and mixture
  43. An investigation of different fitting functions to accurately model the compressive relaxation modulus master curve of asphalt mixes
  44. Comparing different rutting specification parameters using high temperature characteristics of rubber-modified asphalt binders
  45. Characterization of permanent deformation resistance of precipitated calcium carbonate modified asphalt mixture
  46. R-curve behavior and crack propagation properties of asphalt concrete at low temperatures
  47. Development of a predictive model for the compressive relaxation modulus of asphalt mixtures
  48. Rutting Characteristics of Styrene-Ethylene/Propylene-Styrene Polymer Modified Asphalt
  49. Investigating the effects of using nanomaterials on moisture damage of HMA
  50. Estimating the moisture damage of asphalt mixture modified with nano zinc oxide
  51. Comparing various fitting models to construct the tensile relaxation modulus master curve of asphalt mixes
  52. Investigating the effect of nanoparticles on the rutting behaviour of hot-mix asphalt
  53. Comparison of tensile and compressive relaxation modulus of asphalt mixes under various testing conditions
  54. Using energy parameters based on the surface free energy concept to evaluate the moisture susceptibility of hot mix asphalt
  55. Evaluation of rutting properties of high density polyethylene modified binders
  56. Effect of using geosynthetics on reflective crack prevention
  57. Modeling the Primary and Secondary Regions of Creep Curves for SBS-Modified Asphalt Mixtures under Dry and Wet Conditions
  58. Investigating the Effects of Loading Frequency and Temperature on Moisture Sensitivity of SBS-Modified Asphalt Mixtures
  59. A microscopic analysis of speed deviation impacts on lane-changing behavior
  60. A comparative study of temperature shifting techniques for construction of relaxation modulus master curve of asphalt mixes
  61. Investigating the mechanical properties of carbon fibre-reinforced asphalt concrete
  62. Effect of high density polyethylene on the fatigue and rutting performance of hot mix asphalt – a laboratory study
  63. Comparison between GA and PSO in Analyzing Pavement Management Activities
  64. Prediction of Asphalt Mixture Resistance Using Neural Network via Laboratorial X-ray Images
  65. An Image Processing Approach to Asphalt Concrete Feature Extraction
  66. Rutting performance prediction of warm mix asphalt containing reclaimed asphalt pavements
  67. The effects of using recycled concrete on fatigue behavior of hot mix asphalt
  68. Moisture sensitivity of asphalt mixtures under different load frequencies and temperatures
  69. Investigating the Relationships between the Electrical Resistivity Characteristics and the Volumetric Properties of Asphalt Mixtures
  70. Influence of using polymeric aggregate treatment on moisture damage in hot mix asphalt
  71. Low temperature J-resistance curve determination of asphalt concrete using wavelet-Radon transform
  72. Laboratory evaluation of recycled waste concrete into asphalt mixtures
  73. Use of Surface Free Energy Method to Evaluate Effect of Hydrate Lime on Moisture Damage in Hot-Mix Asphalt
  74. Laboratory Evaluation of Using Recycled Marble Aggregates on the Mechanical Properties of Hot Mix Asphalt
  75. Comparative Study on Performance of Wax-Modified and Typical SMA Mixtures
  76. Numerical analysis of thermal and composite stresses in pre-stressed concrete pavements
  77. Mechanistic approach for fiber and polymer modified SMA mixtures
  78. Performance evaluation of linear and nonlinear nanocomposite modified asphalts
  79. Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt
  80. Investigating the properties of crumb rubber modified bitumen using classic and SHRP testing methods
  81. An optimum feature extraction method based on Wavelet–Radon Transform and Dynamic Neural Network for pavement distress classification
  82. An expert system based on wavelet transform and radon neural network for pavement distress classification
  83. PREDICTION THE FATIGUE BEHAVIOR OF STABILIZED RECYCLED BASE
  84. A parametric study on the laboratory fatigue characteristics of recycled mixes
  85. Nonlinear Genetic-Based Models for Prediction of Flow Number of Asphalt Mixtures
  86. A comparison of multi-resolution methods for detection and isolation of pavement distress
  87. Fatigue behavior of SMA and HMA mixtures
  88. Effects of geosynthetics on reduction of reflection cracking in asphalt overlays
  89. Resilient and Permanent Characteristics of Reinforced Granular Materials by Repeated Load Triaxial Tests
  90. Effect of Geogrid Reinforcement in Model Track Tests on Pavements