All Stories

  1. Quantifying the Trajectory Tracking Accuracy in UGVs: The Role of Traffic Scheduling in Wi-Fi-Enabled Time-Sensitive Networking
  2. A Smart Redundant Version of the MQTT Protocol
  3. Bridging real-time CAN networks with in-vehicle single-pair ethernet: A time-sensitive networking approach
  4. Phasor measurement units’ responsiveness: Fault simulations in a 5G network environment
  5. A low-cost TSN-based embedded measurement system: synchronization accuracy assessment
  6. Fault simulation in Phasor Measurement Units: A study on system reaction time in a 5G network environment
  7. IEEE 1588 (PTP) Over mmWave 5G NR: Preliminary Assessment of the Synchronization Accuracy for TSN Applications
  8. Message from the Conference Chairs
  9. Redundancy for MQTT Communication: An Evolution
  10. Time-Sensitive Networking and Software-Defined Networking: An Experimental Setup for Realistic Performances
  11. A TSN-Based Technique for Latency Measurement in Real-Time Wireless Communication Networks
  12. Time Sensitive Networking for Future Enabling Technologies: Overview and Measurement Issues for Metrological Characterization
  13. A TSN-Based Approach to Combine Real-Time CAN Network with In-Vehicle Ethernet
  14. Welcome Message from the General Chairs
  15. A TSN-based Technique for Real-Time Latency Evaluation in Communication Networks
  16. Packet Losses Distributions in 5G Networks for PMU-Based Monitoring Systems
  17. 5G-Enabled PMU-Based Distributed Measurement Systems: Network infrastructure optimization and scalability analysis
  18. Optimized 5G Communication Infrastructure for PMU-Based Distributed Measurement Systems
  19. Time-Sensitive Networking to Improve the Performance of Distributed Functional Safety Systems Implemented over Wi-Fi
  20. Evaluating the Integration of Wireless Time-Sensitive Networking with Software-Defined Networking for Dynamic Network Configuration
  21. Image analysis algorithm for the Anterior Chamber Angle Closure estimation and Van Herick classification
  22. IEC 61850 on 5G Communication Infrastructure: Feasibility Analysis and Practical Considerations
  23. Measurement method for end-to-end Time synchronization of wired and wireless TSN
  24. Exploiting Hybrid Medium Access Control and Relaying Strategies to Overcome Duty-Cycle Limitations in LoRa-Based Sensor Networks
  25. Health Status Remote Monitoring System: ECG Peaks Detection by Successive Thresholding Algorithm Employing Envelope Function
  26. Driver Drowsiness Detection: A Machine Learning Approach on Skin Conductance
  27. learning model for battery lifetime prediction of LoRa sensors in additive manufacturing
  28. A Preliminary Prototype of Smart Healthcare Modular System for Cardiovascular Diseases Remote Monitoring
  29. Exploiting Blood Volume Pulse and Skin Conductance for Driver Drowsiness Detection
  30. An IoT Measurement System Based on LoRaWAN for Additive Manufacturing
  31. Artificial Intelligence - Based Measurement Systems for Automotive: a Comprehensive Review
  32. Driver Drowsiness Detection based on Variation of Skin Conductance from Wearable Device
  33. On the Use of Artificial Intelligence and Sensor Fusion to Develop Accurate Eye Tracking and Driver’s Emotional State Estimation Systems
  34. Ultra-Wideband for Distance Measurement and Positioning in Functional Safety Applications
  35. Smart Measurement Systems Exploiting Adaptive LoRaWAN Under Power Consumption Constraints: a RL Approach
  36. On the Use of an Hyperspectral Imaging Vision Based Measurement System and Machine Learning for Iris Pigmentation Grading
  37. A simple Maxwellian optical system to investigate the photoreceptors contribution to pupillary light reflex
  38. Training of an artificial intelligence algorithm for automatic detection of the Van Herick grade
  39. A Comprehensive Review on Time Sensitive Networks with a Special Focus on Its Applicability to Industrial Smart and Distributed Measurement Systems
  40. Assessment of a Vision-Based Technique for an Automatic Van Herick Measurement System
  41. Functional Safety Networks and Protocols in the Industrial Internet of Things Era
  42. Wi-Fi based Functional Safety: an Assessment of the Fail Safe over EtherCAT (FSoE) protocol
  43. Tuning of a simulation model for the assessment of Functional Safety over Wi-Fi
  44. Welcome Message from the Workshop Chairs
  45. Adaptive LoRaWAN Transmission exploiting Reinforcement Learning: the Industrial Case
  46. A Machine Learning Approach for a Vision-Based Van-Herick Measurement System
  47. SNR-based Reinforcement Learning Rate Adaptation for Time Critical Wi-Fi Networks: Assessment through a Calibrated Simulator
  48. Guest Editorial: Industrial Cyber–Physical Systems—New Trends in Computing and Communications
  49. Assessment of Different OPC UA Implementations for Industrial IoT-Based Measurement Applications
  50. Drive-by-Wi-Fi: Model-Based Control Over Wireless at 1 kHz
  51. The Impact of Rate Adaptation Algorithms on Wi-Fi-Based Factory Automation Systems
  52. Adaptive transmission rate for LQG control over Wi-Fi: A cross-layer approach
  53. A Profinet Simulator for the Digital Twin of Networked Electrical Drive Systems
  54. An IIoT System to Monitor 3D–Printed Artifacts via LoRaWAN Embedded Sensors
  55. Rate Adaptation by Reinforcement Learning for Wi-Fi Industrial Networks
  56. Assessment of Different OPC UA Industrial IoT solutions for Distributed Measurement Applications
  57. Evaluation of LoRaWAN for Sensor Data Collection in an IIoT–based Additive Manufacturing Project
  58. Time-Critical Wireless Networked Embedded Systems: feasibility and experimental assessment
  59. 1 kHz Remote Control of a Balancing Robot with Wi-Fi-in-the-Loop
  60. Comparative assessment of different OPC UA open–source stacks for embedded systems
  61. The Fail Safe over EtherCAT (FSoE) protocol implemented on the IEEE 802.11 WLAN
  62. Embedded systems for time–critical applications over Wi-Fi: design and experimental assessment
  63. Drive-by-Wi-Fi: testing 1 kHz control experiments over wireless
  64. An indoor localization system to detect areas causing the freezing of gait in Parkinsonians
  65. Real-Time and Reliable Industrial Control Over Wireless LANs: Algorithms, Protocols, and Future Directions
  66. SNR-triggered Communication Rate for LQG Control over Wi-Fi
  67. A graph-based approach for mobile localization exploiting real and virtual landmarks
  68. Assessing the Impact of Full-Duplex Wireless in Real-Time Industrial Networks
  69. An Innovative Algorithmic Safety Strategy for Networked Electrical Drive Systems
  70. A Calibrated Test-Set for Measurement of Access-Point Time Specifications in Hybrid Wired/Wireless Industrial Communication †
  71. Characterization of electrical rotary distributors for real-time data communication
  72. On the Use of LoRaWAN for Indoor Industrial IoT Applications
  73. Industrial Communication Technology Handbook
  74. Ethernet POWERLINK
  75. A learning algorithm for rate selection in real-time wireless LANs
  76. Real-time wireless extensions of industrial ethernet networks
  77. IEEE 802.11n for Distributed Measurement Systems
  78. IEEE 802.11s performance assessment: From simulations to real-world experiments
  79. A Dynamic Rate Selection Algorithm for IEEE 802.11 Industrial Wireless LAN
  80. On the Use of IEEE 802.11n for Industrial Communications
  81. Performance analysis of IEEE 802.11 Rate Selection for Industrial Networks
  82. An innovative approach to rate adaptation in IEEE 802.11 real-time industrial networks
  83. An Energy Efficient Ethernet Strategy Based on Traffic Prediction and Shaping
  84. Isochronous wireless communication system for industrial automation
  85. Improved Rate Adaptation strategies for real-time industrial IEEE 802.11n WLANs
  86. Strategies and Services for Energy Efficiency in Real-Time Ethernet Networks
  87. The IEEE 802.11n wireless LAN for real-time industrial communication
  88. Enhancing the real-time behavior of IEEE 802.11n
  89. Energy Efficient Ethernet for Real-Time Industrial Networks
  90. Resolution Enhancement by Compressive Sensing in Power Quality and Phasor Measurement
  91. An energy efficient traffic shaping algorithm for Ethernet-based multimedia industrial traffic
  92. Performance assessment of an IEEE 802.11-based protocol for real-time communication in agriculture
  93. System-level performance of an automation solution based on industry standards
  94. Performance analysis of IEEE 802.11g multi-rate support for industrial applications
  95. Resolution enhancement in harmonic analysis by compressive sensing
  96. Energy Efficient Ethernet for the industrial communication scenario
  97. Industrial Wireless Networks: The Significance of Timeliness in Communication Systems
  98. Characterization of microgrid smart metering: Phasor estimation under impaired conditions
  99. Estimation and analysis of communication service time in a real-time wireless industrial network
  100. On the Rate Adaptation Techniques of IEEE 802.11 Networks for Industrial Applications
  101. A system architecture for distributed monitoring and control in a Smart Microgrid
  102. Tuning of IEEE 802.11 MAC for improving real-time in industrial wireless networks
  103. Performance of Industrial Communication Systems: Real Application Contexts
  104. Estimation of the delay of network devices in hybrid wired/wireless real-time industrial communication systems
  105. A case for IEEE Std. 1451 in smart microgrid environments
  106. A cross-layer simulator for industrial wireless communication systems
  107. Experimental evaluation of the service time for industrial hybrid (wired/wireless) networks under non-ideal environmental conditions
  108. Influence of real components behavior on the performance of wireless industrial communication systems
  109. An Effective and Low-Cost Measurement System for EMC Pre-Compliance Testing of Radiated emissions in the Range 2-8 GHz
  110. Retransmission Strategies for Cyclic Polling Over Wireless Channels in the Presence of Interference
  111. Design of experiments for the assessment of coexistence between wireless networks
  112. Retransmission strategies for cyclic polling over wireless channels in the presence of interference
  113. Investigating WirelessHART coexistence issues through a specifically designed simulator
  114. Investigating wireless networks coexistence issues through an interference aware simulator