All Stories

  1. An effective approach for identifying fatigue-critical defects from X-ray 3D reconstruction: Example in L-PBF AlSil0Mg alloys

    Article • International Journal of Fatigue, May 2026, Elsevier

    Enrico Salvati

  2. Influence of fused filament fabrication process parameters on the quasi-static mechanical behaviour and failure mechanisms of 316L stainless steel

    Article • Engineering Failure Analysis, March 2026, Elsevier

    Enrico Salvati

  3. Defect analysis by computed tomography in metallic materials: Optimisation, uncertainty quantification and classification

    Article • Precision Engineering, January 2026, Elsevier

    Enrico Salvati

  4. Characterization of Defect Distribution in an Additively Manufactured AlSi10Mg as a Function of Processing Parameters and Correlations with Extreme Value Statistics

    Article • Advanced Engineering Materials, December 2025, Wiley

    Enrico Salvati

  5. Crystal plasticity model for cyclic hardening-softening of 316L steel produced by laser-powder bed fusion including the role of sub-grain structures

    Article • Materials Science and Engineering A, November 2025, Elsevier

    Enrico Salvati

  6. Fatigue experimental characterisation of brazed joints in aluminium microchannel heat exchangers

    Article • Fracture and Structural Integrity, October 2025, Gruppo Italiano Frattura

    Enrico Salvati

  7. Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

    Article • Communications Materials, February 2025, Springer Science + Business Media

    Enrico Salvati

  8. Multimodal experimental and numerical evaluation of Residual Stress in AA6082-T6 Friction Stir Welding pipe girths

    Article • Journal of Materials Processing Technology, January 2025, Elsevier

    Enrico Salvati

  9. Evaluating fatigue onset in metallic materials: Problem, current focus and future perspectives

    Article • International Journal of Fatigue, November 2024, Elsevier

    Enrico Salvati

  10. Tuning residual stresses in welded structures by exploiting bio‐inspired suture interfaces

    Article • Fatigue & Fracture of Engineering Materials & Structures, September 2024, Wiley

    Enrico Salvati

  11. Low cycle fatigue modelling of cellular materials produced by laser-powder bed fusion

    Article • Materials & Design, August 2024, Elsevier

    Enrico Salvati

  12. Microstructure and residual stress evolution during cyclic elastoplastic deformation of AISI316L fabricated via laser powder bed fusion

    Article • Materials Science and Engineering A, April 2024, Elsevier

    Enrico Salvati

  13. A Bayesian defect-based physics-guided neural network model for probabilistic fatigue endurance limit evaluation

    Article • Computer Methods in Applied Mechanics and Engineering, January 2024, Elsevier

    Enrico Salvati

  14. Low cycle fatigue behaviour of cellular materials: Experimental comparative study of strut-based and gyroid structures made of additively manufactured 316L steel

    Article • International Journal of Fatigue, January 2024, Elsevier

    Enrico Salvati

  15. GPFniCS: A generalised phase field method to model fracture

    Article • SoftwareX, December 2023, Elsevier

    Enrico Salvati

  16. Quantification of uncertainty in a defect-based Physics-Informed Neural Network for fatigue evaluation and insights on influencing factors

    Article • Engineering Fracture Mechanics, November 2023, Elsevier

    Enrico Salvati

  17. A contact analysis for unconventional mounting processes of angular ball bearings

    Article • International Journal of Mechanics and Materials in Design, October 2023, Springer Science + Business Media

    Enrico Salvati

  18. Probabilistic defect-based modelling of fatigue strength for incomplete datasets assisted by literature data

    Article • International Journal of Fatigue, August 2023, Elsevier

    Enrico Salvati

  19. Experimental and Numerical Investigation of Hot Extruded Inconel 718

    Article • Metals, June 2023, MDPI AG

    Enrico Salvati

  20. Advanced welding and joining technologies – A commentary

    Article • Materials Today Communications, June 2023, Elsevier

    Enrico Salvati

  21. Strain‐controlled fatigue loading of an additively manufactured AISI 316L steel: Cyclic plasticity model and strain–life curve with a comparison to the wrought material

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2023, Wiley

    Enrico Salvati

  22. Multi-length-scale study on the heat treatment response to supersaturated nickel-based superalloys: Precipitation reactions and incipient recrystallisation

    Article • Additive Manufacturing, January 2023, Elsevier

    Enrico Salvati

  23. On the factors influencing the elastoplastic cyclic response and low cycle fatigue failure of AISI 316L steel produced by laser-powder bed fusion

    Article • International Journal of Fatigue, December 2022, Elsevier

    Enrico Salvati

  24. A defect-based physics-informed machine learning framework for fatigue finite life prediction in additive manufacturing

    Article • Materials & Design, October 2022, Elsevier

    Enrico Salvati

  25. Microstructural observations of an AA6082-T6 Hybrid Metal Extrusion & Bonding (HYB) butt weld

    Article • Materials Today Communications, June 2022, Elsevier

    Enrico Salvati

  26. Contour Method with Uncertainty Quantification: A Robust and Optimised Framework via Gaussian Process Regression

    Article • Experimental Mechanics, April 2022, Springer Science + Business Media

    Enrico Salvati

  27. Evaluation and Origin of Residual Stress in Hybrid Metal and Extrusion Bonding and Comparison with Friction Stir Welding

    Article • International Journal of Mechanical Sciences, March 2022, Elsevier

    Enrico Salvati

  28. Improving ultra-fast charging performance and durability of all solid state thin film Li-NMC battery-on-chip systems by in situ TEM lamella analysis

    Article • Applied Materials Today, March 2022, Elsevier

    Enrico Salvati

  29. Cyclic Plasticity and Low-Cycle Fatigue of an AISI 316L Stainless Steel Tested at Room Temperature

    Article • January 2022, Springer Science + Business Media

    Enrico Salvati

  30. The role of cortical zone level and prosthetic platform angle in dental implant mechanical response: A 3D finite element analysis

    Article • Dental Materials, November 2021, Elsevier

    Enrico Salvati

  31. Analysis of in vitro demineralised human enamel using multi-scale correlative optical and scanning electron microscopy, and high-resolution synchrotron wide-angle X-ray scattering

    Article • Materials & Design, August 2021, Elsevier

    Enrico Salvati

  32. Residual stress as a fracture toughening mechanism: A Phase-Field study on a brittle material

    Article • Theoretical and Applied Fracture Mechanics, August 2021, Elsevier

    Enrico Salvati

  33. On the significance of diffuse crack width self‐evolution in the phase‐field model for residually stressed brittle materials

    Article • Material Design & Processing Communications, July 2021, Wiley

    Enrico Salvati

  34. Cyclic Plasticity and Low Cycle Fatigue of an AISI 316L Stainless Steel: Experimental Evaluation of Material Parameters for Durability Design

    Article • Materials, June 2021, MDPI AG

    Enrico Salvati

  35. 3D analysis of enamel demineralisation in human dental caries using high-resolution, large field of view synchrotron X-ray micro-computed tomography

    Article • Materials Today Communications, June 2021, Elsevier

    Enrico Salvati

  36. Finite Element Modelling and Experimental Validation of the Enamel Demineralisation Process at the Rod Level

    Article • Journal of Advanced Research, March 2021, Elsevier

    Enrico Salvati

  37. Stress-Assisted Thermal Diffusion Barrier Breakdown in Ion Beam Deposited Cu/W Nano-Multilayers on Si Substrate Observed by in Situ GISAXS and Transmission EDX

    Article • ACS Applied Materials & Interfaces, January 2021, American Chemical Society (ACS)

    Enrico Salvati

  38. Acid-induced demineralisation of human enamel as a function of time and pH observed using X-ray and polarised light imaging

    Article • Acta Biomaterialia, January 2021, Elsevier

    Enrico Salvati

  39. Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

    Article • Materials & Design, January 2021, Elsevier

    Enrico Salvati

  40. Mode I fracture toughness determination in Cu/W nano-multilayers on polymer substrate by SEM - Digital Image Correlation

    Article • Journal of the Mechanics and Physics of Solids, December 2020, Elsevier

    Enrico Salvati

  41. 2D auxetic metamaterials with tuneable micro-/nanoscale apertures

    Article • Applied Materials Today, September 2020, Elsevier

    Enrico Salvati

  42. An analysis of fatigue failure mechanisms in an additively manufactured and shot peened IN 718 nickel superalloy

    Article • Materials & Design, June 2020, Elsevier

    Enrico Salvati

  43. Synchrotron X-ray Scattering Analysis of Nylon-12 Crystallisation Variation Depending on 3D Printing Conditions

    Article • Polymers, May 2020, MDPI AG

    Enrico Salvati

  44. An experimental and numerical analysis of residual stresses in a TIG weldment of a single crystal nickel-base superalloy

    Article • Journal of Manufacturing Processes, May 2020, Elsevier

    Enrico Salvati

  45. Nano-Scale Residual Stress Profiling in Thin Multilayer Films with Non-Equibiaxial Stress State

    Article • Nanomaterials, April 2020, MDPI AG

    Enrico Salvati

  46. Mechanical properties of thermally grown submicron oxide layers on a nickel-based superalloy

    Article • Corrosion Science, April 2020, Elsevier

    Enrico Salvati

  47. Highly stretchable two-dimensional auxetic metamaterial sheets fabricated via direct-laser cutting

    Article • International Journal of Mechanical Sciences, February 2020, Elsevier

    Enrico Salvati

  48. Polar transformation of 2D X-ray diffraction patterns and the experimental validation of the hDIC technique

    Article • Measurement, February 2020, Elsevier

    Enrico Salvati

  49. Micro-scale measurement & FEM modelling of residual stresses in AA6082-T6 Al alloy generated by wire EDM cutting

    Article • Journal of Materials Processing Technology, January 2020, Elsevier

    Enrico Salvati

  50. Nano-scale residual stress depth profiling in Cu/W nano-multilayers as a function of magnetron sputtering pressure

    Article • Surface and Coatings Technology, January 2020, Elsevier

    Enrico Salvati

  51. Synchrotron X-ray quantitative evaluation of transient deformation and damage phenomena in a single nickel-rich cathode particle

    Article • Energy & Environmental Science, January 2020, Royal Society of Chemistry

    Enrico Salvati

  52. Multiscale synchrotron scattering studies of the temperature-dependent changes in the structure and deformation response of a thermoplastic polyurethane elastomer

    Article • Materials Today Advances, December 2019, Elsevier

    Enrico Salvati

  53. Evolution of thermal and mechanical properties of Nitinol wire as a function of ageing treatment conditions

    Article • Journal of Alloys and Compounds, November 2019, Elsevier

    Enrico Salvati

  54. Investigations into the interface failure of yttria partially stabilised zirconia - porcelain dental prostheses through microscale residual stress and phase quantification

    Article • Dental Materials, November 2019, Elsevier

    Enrico Salvati

  55. Datasets for multi-scale diffraction analysis (synchrotron XRD and EBSD) of twinning-detwinning during tensile-compressive deformation of AZ31B magnesium alloy samples

    Article • Data in Brief, October 2019, Elsevier

    Enrico Salvati

  56. Nanoscale Depth Profiling of Residual Stresses Due to Fine Surface Finishing

    Article • Advanced Materials Interfaces, September 2019, Wiley

    Enrico Salvati

  57. Multi-scale mechanisms of twinning-detwinning in magnesium alloy AZ31B simulated by crystal plasticity modeling and validated via in situ synchrotron XRD and in situ SEM-EBSD

    Article • International Journal of Plasticity, August 2019, Elsevier

    Enrico Salvati

  58. Transverse fatigue behaviour and residual stress analyses of double sided FSW aluminium alloy joints

    Article • Fatigue & Fracture of Engineering Materials & Structures, June 2019, Wiley

    Enrico Salvati

  59. Generalised residual stress depth profiling at the nanoscale using focused ion beam milling

    Article • Journal of the Mechanics and Physics of Solids, April 2019, Elsevier

    Enrico Salvati

  60. Probing the complex thermo-mechanical properties of a 3D-printed polylactide-hydroxyapatite composite using in situ synchrotron X-ray scattering

    Article • Journal of Advanced Research, March 2019, Elsevier

    Enrico Salvati

  61. The effect of surface damage and residual stresses on the fatigue life of nickel superalloys at high temperature

    Article • International Journal of Fatigue, February 2019, Elsevier

    Enrico Salvati

  62. Grain Rotation during Twin-Detwin Deformation of Mg AZ31 Alloy Using In Situ XRD and EBSD

    Article • Key Engineering Materials, January 2019, Trans Tech Publications

    Dr XU X Song, Alexander Korsunsky, Enrico Salvati

  63. The inclusion of short-transverse displacements in the eigenstrain reconstruction of residual stress and distortion in in740h weldments

    Article • Journal of Manufacturing Processes, December 2018, Elsevier

    Enrico Salvati

  64. Separating macro- (Type I) and micro- (Type II+III) residual stresses by ring-core FIB-DIC milling and eigenstrain modelling of a plastically bent titanium alloy bar

    Article • Acta Materialia, September 2018, Elsevier

    Enrico Salvati

  65. In situ monitoring and analysis of enamel demineralisation using synchrotron X-ray scattering

    Article • Acta Biomaterialia, September 2018, Elsevier

    Enrico Salvati

  66. Multiscale analysis of bamboo deformation mechanisms following NaOH treatment using X-ray and correlative microscopy

    Article • Acta Biomaterialia, May 2018, Elsevier

    Enrico Salvati

  67. Nanoscale residual stress depth profiling by Focused Ion Beam milling and eigenstrain analysis

    Article • Materials & Design, May 2018, Elsevier

    Enrico Salvati

  68. Nanoscale Origins of the Size Effect in the Compression Response of Single Crystal Ni-Base Superalloy Micro-Pillars

    Article • Materials, April 2018, MDPI AG

    Enrico Salvati

  69. A simplified FEM eigenstrain residual stress reconstruction for surface treatments in arbitrary 3D geometries

    Article • International Journal of Mechanical Sciences, April 2018, Elsevier

    Enrico Salvati

  70. Digital Image Correlation of 2D X-ray Powder Diffraction Data for Lattice Strain Evaluation

    Article • Materials, March 2018, MDPI AG

    Enrico Salvati

  71. Nanoscale structural damage due to focused ion beam milling of silicon with Ga ions

    Article • Materials Letters, February 2018, Elsevier

    Enrico Salvati

  72. An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modelling

    Article • International Journal of Plasticity, November 2017, Elsevier

    Enrico Salvati

  73. Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade

    Article • Computer Methods in Applied Mechanics and Engineering, June 2017, Elsevier

    Enrico Salvati

  74. Probing the deformation and fracture properties of Cu/W nano-multilayers by in situ SEM and synchrotron XRD strain microscopy

    Article • Surface and Coatings Technology, June 2017, Elsevier

    Enrico Salvati

  75. Strain softening of nano-scale fuzzy interfaces causes Mullins effect in thermoplastic polyurethane

    Article • Scientific Reports, April 2017, Springer Science + Business Media

    Enrico Salvati

  76. Separating plasticity-induced closure and residual stress contributions to fatigue crack retardation following an overload

    Article • Journal of the Mechanics and Physics of Solids, January 2017, Elsevier

    Enrico Salvati

  77. Quantifying eigenstrain distributions induced by focused ion beam damage in silicon

    Article • Materials Letters, December 2016, Elsevier

    Enrico Salvati

  78. A study of overload effect on fatigue crack propagation using EBSD, FIB–DIC and FEM methods

    Article • Engineering Fracture Mechanics, November 2016, Elsevier

    Enrico Salvati

  79. Full in-plane strain tensor analysis using the microscale ring-core FIB milling and DIC approach

    Article • Journal of the Mechanics and Physics of Solids, September 2016, Elsevier

    Enrico Salvati

  80. Elucidating the Mechanism of Fatigue Crack Acceleration Following the Occurrence of an Underload

    Article • Advanced Engineering Materials, August 2016, Wiley

    Enrico Salvati

  81. Experimental and modelling characterisation of residual stresses in cylindrical samples of rapidly cooled bulk metallic glass

    Article • Materials & Design, August 2016, Elsevier

    Enrico Salvati

  82. Uncertainty quantification of residual stress evaluation by the FIB–DIC ring-core method due to elastic anisotropy effects

    Article • International Journal of Solids and Structures, June 2016, Elsevier

    Enrico Salvati

  83. The effect of eigenstrain induced by ion beam damage on the apparent strain relief in FIB-DIC residual stress evaluation

    Article • Materials & Design, February 2016, Elsevier

    Enrico Salvati

  84. A non-linear model for the fatigue assessment of notched components under fatigue loadings

    Article • International Journal of Fatigue, January 2016, Elsevier

    Enrico Salvati

  85. Crack surface morphology and grain misorientation in fatigued aluminium alloy AA7050 samples after interrupted ageing and retrogression-reageing treatments

    Article • Procedia Structural Integrity, January 2016, Elsevier

    Enrico Salvati

  86. Fatigue and Fracture behaviour of AZ31b Mg alloy plastically deformed by Constrained Groove Pressing in the Presence of Overloads

    Article • Procedia Structural Integrity, January 2016, Elsevier

    Enrico Salvati

  87. Residual Stress Measurement on Shot Peened Samples Using FIB-DIC

    Article • January 2016, Springer Science + Business Media

    Enrico Salvati

  88. A state-of-the-art review of micron-scale spatially resolved residual stress analysis by FIB-DIC ring-core milling and other techniques

    Article • The Journal of Strain Analysis for Engineering Design, August 2015, SAGE Publications

    Enrico Salvati

  89. Mode I Stress Intensity Factors for triangular corner crack nearby intersecting of cylindrical holes

    Article • Fracture and Structural Integrity, September 2013, Gruppo Italiano Frattura

    Enrico Salvati