All Stories

  1. Effect of Mo, Nb and V on Hot Deformation Behaviour, Microstructure and Hardness of Microalloyed Steels

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Professor Elena Pereloma

  2. The evolution of microstructure and mechanical properties of Ti–5Al–5Mo–5V–2Cr–1Fe during ageing

    Article • Journal of Alloys and Compounds, April 2015, Elsevier

    Professor Elena Pereloma

  3. The influence of β phase stability on deformation mode and compressive mechanical properties of Ti–10V–3Fe–3Al alloy

    Article • Acta Materialia, February 2015, Elsevier

    Professor Elena Pereloma

  4. The crystallography of carbide-free bainites in thermo-mechanically processed low Si transformation-induced plasticity steels

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Professor Elena Pereloma

  5. A correlative approach to segmenting phases and ferrite morphologies in transformation-induced plasticity steel using electron back-scattering diffraction and energy dispersive X-ray spectroscopy

    Article • Ultramicroscopy, December 2014, Elsevier

    Professor Elena Pereloma

  6. The Formation of Complex Microstructures After Different Deformation Modes in Advanced High-Strength Steels

    Article • Metallurgical and Materials Transactions A, June 2014, Springer Science + Business Media

    Professor Elena Pereloma

  7. Effect of niobium clustering and precipitation on strength of an NbTi-microalloyed ferritic steel

    Article • Materials Science and Engineering A, June 2014, Elsevier

    Professor Elena Pereloma

  8. Self-Consistent Modelling of TWIP Steel during Uniaxial Tensile Loading

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Professor Elena Pereloma

  9. Effect of Composition and Thermo-Mechanical Processing on Microstructure Development in Ni-30Fe-Nb-C Model Alloys

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Professor Elena Pereloma

  10. Role of Microstructure in Susceptibility to Hydrogen Embrittlement of X70 Microalloyed Steel

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Professor Elena Pereloma

  11. On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel

    Article • Acta Materialia, May 2014, Elsevier

    Professor Elena Pereloma

  12. The effect of ageing on microstructure and mechanical properties of powder Ti–5Al–5Mo–5V–1Cr–1Fe alloy

    Article • Materials Science and Engineering A, May 2014, Elsevier

    Professor Elena Pereloma

  13. Self-Consistent Modeling of Texture Evolution in TWIP Steel During Uniaxial Tension

    Article • steel research international, March 2014, Wiley

    Professor Elena Pereloma

  14. Effect of austenite deformation temperature on Nb clustering and precipitation in microalloyed steel

    Article • Scripta Materialia, March 2014, Elsevier

    Professor Elena Pereloma

  15. Recrystallisation in a cold drawn low cost beta titanium alloy during rapid resistance heating

    Article • Journal of Alloys and Compounds, February 2014, Elsevier

    Professor Elena Pereloma

  16. The effect of processing parameters on the microstructure and mechanical properties of low-Si transformation-induced plasticity steels

    Article • Journal of Materials Science, January 2014, Springer Science + Business Media

    Professor Elena Pereloma

  17. Self-consistent modelling of lattice strains during the in-situ tensile loading of twinning induced plasticity steel

    Article • Materials Science and Engineering A, January 2014, Elsevier

    Professor Elena Pereloma

  18. Effect of deformation temperature on niobium clustering, precipitation and austenite recrystallisation in a Nb–Ti microalloyed steel

    Article • Materials Science and Engineering A, October 2013, Elsevier

    Professor Elena Pereloma

  19. On the evolution and modelling of lattice strains during the cyclic loading of TWIP steel

    Article • Acta Materialia, August 2013, Elsevier

    Professor Elena Pereloma

  20. The effect of cooling rates on the microstructure and mechanical properties of thermo-mechanically processed Ti–Al–Mo–V–Cr–Fe alloys

    Article • Materials Science and Engineering A, August 2013, Elsevier

    Professor Elena Pereloma

  21. EBSD Observations of Recrystallisation and Tensile Deformation in Twinning Induced Plasticity Steel

    Article • Transactions of the Indian Institute of Metals, July 2013, Springer Science + Business Media

    Professor Elena Pereloma

  22. Effect of Mo Concentration on Dynamic Recrystallization Behavior of Low Carbon Microalloyed Steels

    Article • steel research international, June 2013, Wiley

    Professor Elena Pereloma

  23. The effect of processing parameters on the dynamic recrystallisation behaviour of API-X70 pipeline steel

    Article • Materials Science and Engineering A, May 2013, Elsevier

    Professor Elena Pereloma

  24. Microstructure and texture evolution in a twinning-induced-plasticity steel during uniaxial tension

    Article • Acta Materialia, April 2013, Elsevier

    Professor Elena Pereloma

  25. Effect of Austenitising and Deformation Temperatures on Dynamic Recrystallisation in Nb-Ti Microalloyed Steel

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Professor Elena Pereloma

  26. On the feasibility of twinning nucleation via extrinsic faulting in twinning-induced plasticity steel

    Article • Scripta Materialia, March 2013, Elsevier

    Professor Elena Pereloma

  27. Effect of microstructure and composition on hydrogen permeation in X70 pipeline steels

    Article • International Journal of Hydrogen Energy, February 2013, Elsevier

    Professor Elena Pereloma

  28. Addressing Retained Austenite Stability in Advanced High Strength Steels

    Article • Materials Science Forum, January 2013, Trans Tech Publications

    Professor Elena Pereloma

  29. Microstructure Development and Alloying Elements Diffusion during Sintering of Near-β Titanium Alloys

    Article • Key Engineering Materials, August 2012, Trans Tech Publications

    Professor Elena Pereloma

  30. Microstructure evolution and alloying elements distribution between the phases in powder near-β titanium alloys during thermo-mechanical processing

    Article • Journal of Materials Science, June 2012, Springer Science + Business Media

    Professor Elena Pereloma

  31. Recrystallization and Mechanical Behavior of High Mn and Low C Cold Rolled and Annealed Steel with TWIP Effect

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Professor Elena Pereloma

  32. Recrystallisation Behaviour of Low Carbon Steel with and without Addition of Chromium

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Professor Elena Pereloma

  33. 2D modelling of the effect of grain size on hydrogen diffusion in X70 steel

    Article • Computational Materials Science, April 2012, Elsevier

    Professor Elena Pereloma

  34. Microstructure-Property Relationship in the Thermomechanically Processed C-Mn-Si-Nb-Al-(Mo) Transformation-Induced Plasticity Steels Before and After Prestraining and Bake Hardening Treatment

    Article • Metallurgical and Materials Transactions A, March 2012, Springer Science + Business Media

    Professor Elena Pereloma

  35. Effect of bainitic transformation on bake hardening in TRIP assisted steel

    Article • Materials Science and Engineering A, February 2012, Elsevier

    Dr Sourav Das, Professor Elena Pereloma

  36. Phase transformations in steels

    Article • January 2012, Elsevier

    Professor Elena Pereloma

  37. Phase transformations in steels

    Article • January 2012, Elsevier

    Professor Elena Pereloma

  38. Introduction

    Article • January 2012, Elsevier

    Professor Elena Pereloma

  39. Effect of Grain Size on the Hydrogen Diffusion Process in Steel Using Cellular Automaton Approach

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Professor Elena Pereloma

  40. Effect of Annealing on the Microstructure, Texture and Mechanical Properties of Severely Deformed Interstitial Free Steel

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Professor Elena Pereloma

  41. The effect of heating rate on reverse transformations in steels and Fe-Ni-based alloys

    Article • January 2012, Elsevier

    Professor Elena Pereloma

  42. Texture Evolution during Recrystallisation of Cold Rolled TWIP Steel

    Article • Materials Science Forum, December 2011, Trans Tech Publications

    Professor Elena Pereloma

  43. Annealing behaviour and mechanical properties of severely deformed interstitial free steel

    Article • Materials Science and Engineering A, December 2011, Elsevier

    Professor Elena Pereloma

  44. Evolution of Microstructure and Mechanical Properties during Annealing of Cold Rolled Fe-24Mn-3Al-2Si-1Ni-0.06C Twip Steel

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Professor Elena Pereloma

  45. Understanding the Behavior of Advanced High-Strength Steels Using Atom Probe Tomography

    Article • Metallurgical and Materials Transactions A, September 2011, Springer Science + Business Media

    Professor Elena Pereloma

  46. Effect of Iron Content on Sintering Behavior of Ti-V-Fe-Al Near-β Titanium Alloy

    Article • Metallurgical and Materials Transactions A, September 2011, Springer Science + Business Media

    Professor Elena Pereloma

  47. Microtexture analysis of cold-rolled and annealed twinning-induced plasticity steel

    Article • Scripta Materialia, September 2011, Elsevier

    Professor Elena Pereloma

  48. Evolution of recrystallization texture in a 0.78wt.% Cr extra-low-carbon steel after warm and cold rolling

    Article • Acta Materialia, July 2011, Elsevier

    Professor Elena Pereloma

  49. Reversible α′↔β′ transformation in a textured Sm-sialon ceramic

    Article • Journal of the European Ceramic Society, June 2011, Elsevier

    Professor Elena Pereloma

  50. Microstructure and mechanical properties after annealing of equal-channel angular pressed interstitial-free steel

    Article • Acta Materialia, June 2011, Elsevier

    Professor Elena Pereloma

  51. Effect of Thermomechanical Processing on the Microstructure and Retained Austenite Stability during In Situ Tensile Testing Using Synchrotron X-Ray Diffraction of NbMoAl TRIP Steel

    Article • Solid State Phenomena, June 2011, Trans Tech Publications

    Professor Elena Pereloma

  52. Texture evolution of cold rolled and annealed Fe–24Mn–3Al–2Si–1Ni–0.06C TWIP steel

    Article • Materials Science and Engineering A, May 2011, Elsevier

    Professor Elena Pereloma

  53. Atom probe analysis of clusters and precipitates in severely deformed and annealed interstitial free steel

    Article • Materials Science and Technology, April 2011, Taylor & Francis

    Professor Elena Pereloma

  54. Effect of annealing on the microstructure and mechanical properties of cold rolled Fe–24Mn–3Al–2Si–1Ni–0.06C TWIP steel

    Article • Materials Science and Engineering A, April 2011, Elsevier

    Professor Elena Pereloma

  55. Application of advanced analytical techniques to study structure–property relationship of hot rolled high strength low alloy steel

    Article • Materials Science and Technology, January 2011, Taylor & Francis

    Professor Elena Pereloma

  56. Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near-β titanium alloy

    Article • Materials Science and Engineering A, January 2011, Elsevier

    Professor Elena Pereloma

  57. Effect of Cold Rolling on as–ECAP Interstitial Free Steel

    Article • Metallurgical and Materials Transactions A, November 2010, Springer Science + Business Media

    Professor Elena Pereloma

  58. High-strength ultrafine-grained Ti-Fe-Sn alloys with a bimodal structure

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Professor Elena Pereloma

  59. Mechanical, microstructure and texture properties of interstitial-free steel and copper subjected to equal channel angular extrusion and cold-rolling

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Professor Elena Pereloma

  60. Nano-Scale Analysis of Nano-Bainite Formed in Advanced High Strength Steels

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Elena Pereloma

  61. Role of Microstructure in Susceptibility of X70 Pipeline Steel to Hydrogen Embrittlement

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Elena Pereloma

  62. Effect of Thermomechanical Processing Parameters on the Microstructure Development in Low Si TRIP Steel

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Elena Pereloma

  63. Effects of Processing Parameters on Microstructure Development in X70 Pipeline Steel

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Elena Pereloma

  64. Effect of Cr and Mo on strain ageing behaviour of low carbon steel

    Article • Materials Science and Engineering A, April 2010, Elsevier

    Professor Elena Pereloma

  65. An Assessment of Bulk and Local Stored Energy Measurements in Ultrafine Grained Interstitial Free Steel

    Article • Advanced Materials Research, January 2010, Trans Tech Publications

    Professor Elena Pereloma

  66. Effect of Manufacturing Process on the Final Properties of Advanced High Strength Steels for Automotive Applications

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Professor Elena Pereloma

  67. Characterization of the Bake-hardening Behavior of Transformation Induced Plasticity and Dual-phase Steels Using Advanced Analytical Techniques

    Article • ISIJ International, January 2010, Iron and Steel Institute of Japan

    Professor Elena Pereloma

  68. Corrigendum to “Evolution of texture at the initial stages of continuous annealing of cold rolled dual-phase steel: Effect of heating rate” [Mater. Sci. Eng.: A 480 (2008) 540–548]

    Article • Materials Science and Engineering A, November 2009, Elsevier

    Professor Elena Pereloma

  69. Stored energy of a severely deformed interstitial free steel

    Article • Materials Science and Engineering A, October 2009, Elsevier

    Professor Elena Pereloma

  70. Observation of Precipitation Evolution in Fe-Ni-Mn-Ti-Al Maraging Steel by Atom Probe Tomography

    Article • Metallurgical and Materials Transactions A, September 2009, Springer Science + Business Media

    Professor Elena Pereloma

  71. Deep drawing behaviour of ultrafine grained copper: modelling and experiment

    Article • Journal of Materials Science, July 2009, Springer Science + Business Media

    Professor Elena Pereloma

  72. D-84 Observations of Retained Austenite Stability and Stress Partitioning in Transformation-Induced Plasticity Steel During in Situ Tensile Testing Using Synchrotron X-ray Diffraction

    Article • Powder Diffraction, June 2009, Cambridge University Press

    Professor Elena Pereloma

  73. Cyclic Deformation of Advanced High-Strength Steels: Mechanical Behavior and Microstructural Analysis

    Article • Metallurgical and Materials Transactions A, January 2009, Springer Science + Business Media

    Professor Elena Pereloma

  74. Thermomechanical Processing of Pipeline Steels with a Reduced Mn Content

    Article • ISIJ International, January 2009, Iron and Steel Institute of Japan

    Professor Elena Pereloma

  75. Mechanical Behavior and Microstructure of High Carbon Si–Mn–Cr Steel with Trip Effect

    Article • ISIJ International, January 2009, Iron and Steel Institute of Japan

    Professor Elena Pereloma

  76. The Hall-Petch Relationship in Interstitial-Free Steel Processed by Equal Channel Angular Extrusion

    Article • January 2009, Springer Science + Business Media

    Professor Elena Pereloma

  77. Observations of decomposition of martensite during heat treatment of steels using atom probe tomography

    Article • January 2009, EDP Sciences

    Professor Elena Pereloma

  78. An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion

    Article • Materials Science and Engineering A, December 2008, Elsevier

    Professor Elena Pereloma

  79. On the Decomposition of Martensite during Bake Hardening of Thermomechanically Processed Transformation-Induced Plasticity Steels

    Article • Metallurgical and Materials Transactions A, October 2008, Springer Science + Business Media

    Professor Elena Pereloma

  80. Effect of thermomechanical processing on mechanical behavior and microstructure evolution of C–Mn multiphase high strength cold rolled steel

    Article • Journal of Materials Science, September 2008, Springer Science + Business Media

    Professor Elena Pereloma

  81. Stored energy, vacancies and thermal stability of ultra-fine grained copper

    Article • Materials Science and Engineering A, September 2008, Elsevier

    Professor Elena Pereloma

  82. Effect of pre-straining and bake hardening on the microstructure of thermomechanically processed CMnSi TRIP steels with and without Nb and Mo additions

    Article • Scripta Materialia, June 2008, Elsevier

    Professor Elena Pereloma

  83. Evolution of texture at the initial stages of continuous annealing of cold rolled dual-phase steel: Effect of heating rate

    Article • Materials Science and Engineering A, May 2008, Elsevier

    Professor Elena Pereloma

  84. Erratum to: Recent progress on the study of the microstructure and mechanical properties of ECAE copper

    Article • Journal of Materials Science, May 2008, Springer Science + Business Media

    Professor Elena Pereloma

  85. Effect of Processing Schedule on the Microstructure and Texture of 0.78 wt% Cr Extra-low-carbon Steel

    Article • ISIJ International, January 2008, Iron and Steel Institute of Japan

    Professor Elena Pereloma

  86. Texture and Boundary Characteristics of Severely Deformed and Recrystallized Copper

    Article • October 2007, CrossRef Test Account

    Professor Elena Pereloma

  87. Texture Evolution during Annealing of Warm Rolled Cr-Containing Low Carbon Steels

    Article • October 2007, CrossRef Test Account

    Professor Elena Pereloma

  88. Characterization of Nano-Scale Particles in Hot-Rolled, High Strength Low Alloy Steels (HSLA)

    Article • October 2007, CrossRef Test Account

    Professor Elena Pereloma

  89. Texture and Boundary Characteristics of Severely Deformed and Recrystallized Copper

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Elena Pereloma

  90. Texture Evolution during Annealing of Warm Rolled Cr-Containing Low Carbon Steels

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Elena Pereloma

  91. Characterization of Nano-Scale Particles in Hot-Rolled, High Strength Low Alloy Steels (HSLA)

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Elena Pereloma

  92. Transmission Electron Microscopy Characterization of the Bake-Hardening Behavior of Transformation-Induced Plasticity and Dual-Phase Steels

    Article • Metallurgical and Materials Transactions A, August 2007, Springer Science + Business Media

    Professor Elena Pereloma

  93. Recent progress on the study of the microstructure and mechanical properties of ECAE copper

    Article • Journal of Materials Science, August 2007, Springer Science + Business Media

    Professor Elena Pereloma

  94. Intercritical Annealing Behaviour of an Ultrafine Grained C-Mn Steel Obtained by Hot Torsion Deformation

    Article • July 2007, CrossRef Test Account

    Professor Elena Pereloma

  95. Intercritical Annealing Behaviour of an Ultrafine Grained C-Mn Steel Obtained by Hot Torsion Deformation

    Article • Materials Science Forum, July 2007, Trans Tech Publications

    Professor Elena Pereloma

  96. Grain Size, Misorientation, and Texture Evolution of Copper Processed by Equal Channel Angular Extrusion and the Validity of the Hall–Petch Relationship

    Article • Metallurgical and Materials Transactions A, May 2007, Springer Science + Business Media

    Professor Elena Pereloma

  97. Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels

    Article • Acta Materialia, May 2007, Elsevier

    Professor Elena Pereloma

  98. Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography

    Article • Scripta Materialia, April 2007, Elsevier

    Professor Elena Pereloma

  99. Effect of Cr on Strain Ageing Behaviour of Low Carbon Steel

    Article • March 2007, CrossRef Test Account

    Professor Elena Pereloma

  100. Effect of Initial Processing on the Microstructure-Property Relationships in Bake-Hardened C-Mn-Si TRIP Steels

    Article • March 2007, CrossRef Test Account

    Professor Elena Pereloma

  101. Effect of Processing Route on Mechanical Behavior of C-Mn Multiphase High Strength Cold Rolled Steel

    Article • March 2007, CrossRef Test Account

    Professor Elena Pereloma

  102. Effect of Cr on Strain Ageing Behaviour of Low Carbon Steel

    Article • Materials Science Forum, March 2007, Trans Tech Publications

    Professor Elena Pereloma

  103. Effect of Processing Route on Mechanical Behavior of C-Mn Multiphase High Strength Cold Rolled Steel

    Article • Materials Science Forum, March 2007, Trans Tech Publications

    Professor Elena Pereloma

  104. Effect of Initial Processing on the Microstructure-Property Relationships in Bake-Hardened C-Mn-Si TRIP Steels

    Article • Materials Science Forum, March 2007, Trans Tech Publications

    Professor Elena Pereloma

  105. Microstructural characterization of warm rolled Cr-containing low carbon steel

    Article • Scripta Materialia, March 2007, Elsevier

    Professor Elena Pereloma

  106. Orientation Effect on Mechanical Properties of Commercially Pure Titanium at Room Temperature

    Article • Metallurgical and Materials Transactions A, February 2007, Springer Science + Business Media

    Professor Elena Pereloma

  107. Microstructure and texture evolution during equal channel angular extrusion of interstitial-free steel: Effects of die angle and processing route

    Article • Acta Materialia, February 2007, Elsevier

    Professor Elena Pereloma

  108. Progressive texture evolution during equal channel angular extrusion

    Article • Materials Science and Engineering A, November 2006, Elsevier

    Professor Elena Pereloma

  109. Fine-scale microstructural investigations of warm rolled low-carbon steels with and without Cr, P, and B additions

    Article • Acta Materialia, October 2006, Elsevier

    Professor Elena Pereloma

  110. Microstructure and properties of austempered ductile iron subjected to single and two step processing

    Article • Materials Science and Technology, September 2006, Taylor & Francis

    Professor Elena Pereloma

  111. Microbiologically assisted stress corrosion cracking of carbon steel in mixed and pure cultures of sulfate reducing bacteria

    Article • International Biodeterioration & Biodegradation, July 2006, Elsevier

    Professor Elena Pereloma

  112. Effect of Orientation and Temperature on the Mechanical Properties of Commercially Pure Titanium

    Article • February 2006, CrossRef Test Account

    Professor Elena Pereloma

  113. Effect of Orientation and Temperature on the Mechanical Properties of Commercially Pure Titanium

    Article • Advanced Materials Research, February 2006, Trans Tech Publications

    Professor Elena Pereloma

  114. Hot Forging of a Textured alpha-Sialon Ceramic

    Article • Journal of the American Ceramic Society, February 2006, Wiley

    Professor Elena Pereloma

  115. Effect of processing route on microstructure and texture development in equal channel angular extrusion of interstitial-free steel

    Article • Acta Materialia, February 2006, Elsevier

    Professor Elena Pereloma

  116. Characterization of clusters and ultrafine precipitates in Nb-containing C–Mn–Si steels

    Article • Scripta Materialia, February 2006, Elsevier

    Professor Elena Pereloma

  117. Strain hardening behaviour and deformation kinetics of Cu deformed by equal channel angular extrusion from 1 to 16 passes

    Article • Acta Materialia, February 2006, Elsevier

    Professor Elena Pereloma

  118. Reversible α′↔β′ transformation in preferentially oriented sialon ceramics

    Article • Journal of the European Ceramic Society, January 2006, Elsevier

    Professor Elena Pereloma

  119. Microstructure and texture evolution of bcc and fcc metals subjected to equal channel angular extrusion

    Article • Materials Science and Engineering A, January 2006, Elsevier

    Professor Elena Pereloma

  120. Relationship between Microstructure and Texture Development during the Early Stages of Annealing in Warm Rolled Low Carbon Steels

    Article • November 2005, CrossRef Test Account

    Professor Elena Pereloma

  121. Relationship between Microstructure and Texture Development during the Early Stages of Annealing in Warm Rolled Low Carbon Steels

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Elena Pereloma

  122. Texture Development in Interstitial Free (IF) Steel Subjected to Two Cycles of Equal Channel Angular Extrusion

    Article • September 2005, CrossRef Test Account

    Professor Elena Pereloma

  123. Texture Development in Interstitial Free (IF) Steel Subjected to Two Cycles of Equal Channel Angular Extrusion

    Article • Materials Science Forum, September 2005, Trans Tech Publications

    Professor Elena Pereloma

  124. Hydrogen embrittlement of a low carbon steel during slow strain testing in chloride solutions containing sulphate reducing bacteria

    Article • Materials Science and Technology, September 2005, Taylor & Francis

    Professor Elena Pereloma

  125. Atomic Observations of Warm Rolled Low Carbon Steels Alloyed with Cr and P

    Article • Microscopy and Microanalysis, August 2005, Cambridge University Press

    Professor Elena Pereloma

  126. Development of an ultrafine grained ferrite in a low C–Mn and Nb–Ti microalloyed steels after warm torsion and intercritical annealing

    Article • Materials Science and Engineering A, August 2005, Elsevier

    Professor Elena Pereloma

  127. Reply to comment on “an alternative physical explanation of the Hall–Petch relation”

    Article • Scripta Materialia, July 2005, Elsevier

    Professor Elena Pereloma

  128. Gradient plasticity constitutive model reflecting the ultrafine micro-structure scale: the case of severely deformed copper

    Article • Journal of the Mechanics and Physics of Solids, April 2005, Elsevier

    Professor Elena Pereloma

  129. Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel

    Article • Materials Science and Engineering A, January 2005, Elsevier

    Professor Elena Pereloma

  130. TEM Characterization of the Recrystallization Behaviour of Warm Rolled Low Carbon Steels Containing Chromium during the Early Stages of Annealing

    Article • ISIJ International, January 2005, Iron and Steel Institute of Japan

    Professor Elena Pereloma

  131. Reply to comment on “An alternate physical explanation of the Hall–Petch relation”

    Article • Scripta Materialia, November 2004, Elsevier

    Professor Elena Pereloma

  132. Ageing behaviour of an Fe–20Ni–1.8Mn–1.6Ti–0.59Al (wt%) maraging alloy: clustering, precipitation and hardening

    Article • Acta Materialia, November 2004, Elsevier

    Professor Elena Pereloma

  133. Strain rate sensitivity and apparent activation volume measurements on equal channel angular extruded Cu processed by one to twelve passes

    Article • Scripta Materialia, September 2004, Elsevier

    Professor Elena Pereloma

  134. Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes

    Article • Acta Materialia, September 2004, Elsevier

    Professor Elena Pereloma

  135. Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels

    Article • Metallurgical and Materials Transactions A, August 2004, Springer Science + Business Media

    Professor Elena Pereloma

  136. Effect of aging and deformation on the microstructure and properties of Fe−Ni−Ti maraging steel

    Article • Metallurgical and Materials Transactions A, March 2004, Springer Science + Business Media

    Professor Elena Pereloma

  137. An alternative physical explanation of the Hall–Petch relation

    Article • Acta Materialia, February 2004, Elsevier

    Professor Elena Pereloma

  138. On the Influence of the Misorientation of Grains, Grain Size and Boundary Volume on the Strength and Ductility of Ultrafine Grained Cu

    Article • MRS Proceedings, January 2004, Cambridge University Press

    Professor Elena Pereloma

  139. Effect of Alloying Elements on the Microstructure and Texture of Warm Rolled Steels

    Article • ISIJ International, January 2004, Iron and Steel Institute of Japan

    Professor Elena Pereloma

  140. Simultaneous prediction of austemperability and processing window for austempered ductile iron

    Article • Materials Science and Technology, December 2003, Taylor & Francis

    Professor Elena Pereloma

  141. Microstructure and Mechanical Properties of Interstitial Free Steel Subjected to Equal Channel Angular Extrusion

    Article • Materials Science Forum, August 2003, Trans Tech Publications

    Professor Elena Pereloma

  142. Effect of deformation schedule on the microstructure and mechanical properties of a thermomechanically processed C-Mn-Si transformation-induced plasticity steel

    Article • Metallurgical and Materials Transactions A, August 2003, Springer Science + Business Media

    Professor Elena Pereloma

  143. Preferential Orientation of SiAlON Grains in Reversible α'↔β' Phase Transformations

    Article • Key Engineering Materials, April 2003, Trans Tech Publications

    Professor Elena Pereloma

  144. Formation of ultra-fine ferrite microstructure in warm rolled and annealed C–Mn steel

    Article • Materials Science and Engineering A, April 2003, Elsevier

    Professor Elena Pereloma

  145. Model for prediction of processing window for austempered ductile iron

    Article • Materials Science and Technology, October 2002, Taylor & Francis

    Professor Elena Pereloma

  146. Microstructure and properties of monotectic Cr—Cu cast irons

    Article • Materials Science and Technology, February 2002, Taylor & Francis

    Professor Elena Pereloma

  147. Application of bainite transformation model to estimation of processing window boundaries for Mn-Mo-Cu austempered ductile iron

    Article • Materials Science and Technology, December 2001, Taylor & Francis

    Professor Elena Pereloma

  148. Comparison of ferritic nitrocarburising technologies

    Article • Surface and Coatings Technology, August 2001, Elsevier

    Professor Elena Pereloma

  149. Microstructure and mechanical properties of thermomechanically processed C–Si–Mn steels

    Article • Ironmaking & Steelmaking, April 2001, Taylor & Francis

    Professor Elena Pereloma

  150. Strain-induced precipitation behaviour in hot rolled strip steel

    Article • Materials Science and Engineering A, February 2001, Elsevier

    Professor Elena Pereloma

  151. Microstructure and mechanical properties of C–Si–Mn(–Nb) TRIP steels after simulated thermomechanical processing

    Article • Materials Science and Technology, February 2001, Taylor & Francis

    Professor Elena Pereloma

  152. Effect of temper embrittlement and specimen size on Charpy impact testing of a Cr–Mo–V rotor steel

    Article • Materials Science and Technology, February 2001, Taylor & Francis

    Professor Elena Pereloma

  153. Formation of cementite in tempered Fe–Co–C alloys

    Article • Micron, January 2001, Elsevier

    Professor Elena Pereloma

  154. Mechanical properities of an HSLA bainitic steel subjected to controlled rolling with accelerated cooling

    Article • Materials Science and Engineering A, May 2000, Elsevier

    Professor Elena Pereloma

  155. Transformation behaviour in thermomechanically processed C–Mn–Si TRIP steels with and without Nb

    Article • Materials Science and Engineering A, December 1999, Elsevier

    Professor Elena Pereloma

  156. The effect of transformation path on the final microstructure of high- and low-silicon 0.1 wt.% C steels

    Article • Materials Science and Engineering A, August 1998, Elsevier

    Professor Elena Pereloma

  157. The Effect of Si on the Microstructural Evolution of Discontinuously Cooled Strip Steels

    Article • Materials Science Forum, June 1998, Trans Tech Publications

    Professor Elena Pereloma

  158. Nano-Inclusions Associated with β-SiAlON Grains in α-β SiAlON Materials

    Article • Key Engineering Materials, April 1997, Trans Tech Publications

    Professor Elena Pereloma

  159. Effects of simulated on line accelerated cooling processing on transformation temperatures and microstructure in microalloyed steels Part 2 – Plate processing

    Article • Materials Science and Technology, December 1996, Maney Publishing

    Professor Elena Pereloma

  160. Effects of simulated on line accelerated cooling processing on transformation temperatures and microstructure in microalloyed steels Part 1 – Strip processing

    Article • Materials Science and Technology, October 1996, Maney Publishing

    Professor Elena Pereloma

  161. Microstructural evolution during simulated OLAC processing of a low-carbon microalloyed steel

    Article • Materials Science and Engineering A, June 1996, Elsevier

    Professor Elena Pereloma

  162. On the nature of “raised ferrite” in a low-carbon microalloyed steel

    Article • Scripta Materialia, March 1996, Elsevier

    Professor Elena Pereloma