All Stories

  1. Enhancement of Seismic Resilience of Structures With Tuned Mass Damper Inerter by Using Effective Damping Ratio
  2. Seismic Performance of Eccentrically Braced Frames Using Codal Provisions: A Comparative Design Study
  3. Effect of Earthquake and Hydrostatic Water Pressure on the Seismic Stability of Slopes Supported by Mechanically Stabilized Earth Retaining Walls
  4. The Role of Digital Twin for Space and Remote Terrestrial Construction
  5. Design and structural performance of connections in façade
  6. Develop a hybrid metaheuristic algorithm for the cost optimization of castellated beam
  7. 3D Printing of Conventional and Geopolymer Concretes: Advancements, Challenges, Future Directions, and Cost Analysis
  8. A metaheuristic-based approach for optimizing the allocation of emergency water reservoirs for fire following earthquake suppression
  9. Australia faces a home insurance reckoning – and we can learn from California’s bold move
  10. Here’s what pausing the National Construction Code means for builders and home buyers
  11. Analyzing Progressive Damage of the Millennium Dome’s Tensile Membrane under Storm Eunice
  12. Effects of River Shapes on Structural Damages to Buildings in Flood-Prone Regions
  13. Enhancing Axial Behavior of RC Columns: Experimental Study on GFRP Confinement
  14. Comprehensive Evaluation of Sliding and Overturning Failure in Mechanically Stabilized Earth (MSE) Retaining Walls Considering the Effect of Hydrostatic Pressure
  15. Australia is forecast to fall 262,000 homes short of its housing target. We need bold action
  16. Nonlinear Seismic Performance Evaluation of Hybrid Base Isolation Systems
  17. Analysis and Classification of Distress on Flexible Pavements Using Convolutional Neural Networks: A Case Study in Benin Republic
  18. Climate change and the housing crisis are a dangerous mix. So which party is grappling with both?
  19. A Novel Hybrid Metaheuristic MPA-PSO to Optimize the Properties of Viscous Dampers
  20. Why is it so hard for everyone to have a house in Australia?
  21. A $33 billion vote-grabber or real relief? Examining the Albanese government’s big housing pledge
  22. Shuttered car factories in Australia could be repurposed to make houses faster and cheaper
  23. Fracture mechanics analysis of steel bolted joints using a 3D global model based on peridynamics theory
  24. Enhancing Blast Mitigation Strategies in RC Buildings: A Fuzzy Logic Approach to Optimal Damper Placement
  25. Application of the Modified Endurance Time Method for Predicting Seismic Response of Base-Isolated Structures Under Pounding
  26. Performance-driven choice of steel vs aluminum curtain walls: A scenario-based comparison
  27. Cheaper housing and better transport? What you need to know about Australia’s new National Urban Policy
  28. A State-of-the-Art Review and Bibliometric Analysis on the Smart Preservation of Heritages
  29. Predicting the Residual Compressive Strength of Concrete Exposed to Elevated Temperatures Using Interpretable Machine Learning
  30. From climate change to landfill, AI promises to solve Earth’s big environmental problems – but there’s a hitch
  31. Effect of high‐range water reducer and W/C ratio on the fresh and mechanical properties of fiber‐reinforced natural zeolite SCC
  32. Correlation of Soil Conditions with Seismic Damage of Structures in Craiova, Romania
  33. Toward Sustainable Architecture: Structural Analysis and Energy Efficiency of Vertical Sun Control Systems
  34. Effect of polypropylene fibers on the bond-slip performance of HSS bars in HPC and UHPC
  35. How investing in green buildings, including cheaper home loans, is a win for banks, people and our planet
  36. Fostering Social Sustainability: Inclusive Communities through Prefabricated Housing
  37. Using Biopolymers as Anti-Washout Admixtures under Water Concreting
  38. Design of lead-rubber-bearing isolation systems using a grasshopper optimisation algorithm
  39. Bridges damaged during the 2019 Poldokhtar flood: towards flood-resilient bridges
  40. Innovative triangular plate elements for enhanced plate bending analyses
  41. Prediction of CBR by Deep Artificial Neural Networks with Hyperparameter Optimization by Simulated Annealing
  42. Adequacy of Equivalent Static Analysis Method Employing Caltrans, AASHTO, and ATC-32 Provisions in Response Estimation of Vibration-Controlled Bridges
  43. Wind-Induced Structural Response of Skylights: A Eurocode-Based Assessment
  44. A prefab building revolution can help resolve both the climate and housing crises
  45. Enhancing the performance of precast hybrid concrete deep beams using curved and arched designs: Experimental investigations
  46. From model-driven to data-driven: A review of hysteresis modeling in structural and mechanical systems
  47. An Insight into the Characteristics of the September 24, 2019, MW 5.8 Mirpur, Pakistan, Earthquake and Reconnaissance of the Induced-Failure Modes in Buildings and Civil Infrastructure Facilities
  48. The influence of model and measurement uncertainties on damage detection of experimental structures through recursive algorithms
  49. Editorial: Seismic resilience, vulnerability and energy efficiency in respect of climate change
  50. Blast Mitigation of Reinforced Concrete Structures Incorporating Shear Walls in Modern Building Designs
  51. Automation in Construction toward Resilience
  52. Autonomous Inspection and Construction of Civil Infrastructure Using Robots
  53. Corrigendum to “On the utilization of rice husk ash in high-performance fiber reinforced concrete (HPFRC) to reduce silica fume content” [Constr. Build. Mater. 369 (2023) 130576]
  54. Optimum tuned tandem mass dampers for suppressing seismic-induced vibrations considering soil-structure interaction
  55. Experimental and Numerical Investigations of Laced Built-Up Lightweight Concrete Encased Columns Subjected to Cyclic Axial Load
  56. Performance and protection of pre-engineered buildings subjected to blast and earthquake excitations
  57. Seismic fragility estimation considering field inspection of reinforced concrete girder bridges
  58. Innovative cost-effective pendulum tiltmeter based on the moiré technique
  59. Application of metaheuristic algorithms in prediction of earthquake peak ground acceleration
  60. Effects of Ground Motion Incident Angle on Inelastic Seismic Demands of Skewed Bridges Subjected to Mainshock–Aftershock Sequences
  61. Influence of Fiber Type on the Performance of Reinforced Concrete Beams Made of Waste Aggregates: Experimental, Numerical, and Cost Analyses
  62. Modified endurance time method for seismic performance assessment of base-isolated structures
  63. Performance evaluation of high-performance self-compacting concrete with waste glass aggregate and metakaolin
  64. Eco-friendly and cost-effective self-compacting concrete using waste banana leaf ash
  65. Global performance of multi-story stiffness-eccentric RC structures subjected to progressive seismic excitations: Shaking table investigations
  66. Experimental investigation of GFRP-RC beams with Polypropylene fibers and waste granite recycled aggregate
  67. On the utilization of rice husk ash in high-performance fiber reinforced concrete (HPFRC) to reduce silica fume content
  68. Seismic fragility estimation of cable-stayed bridges with various pylon shapes considering soil-pile interaction
  69. A novel clevis-based beam-column model to investigate the hysteretic characteristics of steel moment connections: Experimental and numerical simulations
  70. Airy stress function for proposed thermoelastic triangular elements
  71. Representing capabilities of novel semi-analytical triangular plate elements
  72. Application of a Novel Optimization Algorithm in Design of Lead Rubber Bearing Isolation Systems for Seismic Rehabilitation of Building Structures
  73. Enhancing Seismic Design of Non-structural Components Implementing Artificial Intelligence Approach: Predicting Component Dynamic Amplification Factors
  74. Performance evaluation of composite concrete-filled steel tube columns by steel fibers and different cross-section shapes: Experimental and numerical investigations
  75. Resilient clevis-based connections equipped with hybrid Ni–Ti shape memory alloys and steel tendons: Experimental and FE investigations
  76. A Novel Computer-Vision Approach Assisted by 2D-Wavelet Transform and Locality Sensitive Discriminant Analysis for Concrete Crack Detection
  77. Impact of Polypropylene Fibers on the Mechanical and Durability Characteristics of Rubber Tire Fine Aggregate Concrete
  78. Experimental investigation of GFRP‐reinforced concrete columns made with waste aggregates under concentric and eccentric loads
  79. Seismic Performance Upgrade of Elevated Water Tanks Utilizing Friction Dampers
  80. Seismic Performance Analysis of the Elevated RC Tanks under Strong Far- and Near-Fault Ground Motions Considering Fluid–Structure Interaction
  81. Seismic resilience enhancement of MDOF systems utilizing a hybrid TMD-TLD
  82. Flutter control of truss-type suspension bridges with a tuned mass damper based on the mass polar moment of inertia's optimum configuration
  83. Influence of earthquake excitations on concrete gravity dams founded on homogeneous and layered foundation
  84. Sustainable Earthquake Resilience with the Versatile Shape Memory Alloy (SMA)-Based Superelasticity-Assisted Slider
  85. Investigation of Behavior of Masonry Walls Constructed with Autoclaved Aerated Concrete Blocks under Blast Loading
  86. An innovative negative stiffness-inerter hybrid control device toward seismic-resilient structures
  87. Effective range of base isolation design parameters to improve structural performance under far and near-fault earthquakes
  88. On the Efficacy of a Novel Optimized Tuned Mass Damper for Minimizing Dynamic Responses of Cantilever Beams
  89. Application and modelling of Shape-Memory Alloys for structural vibration control: State-of-the-art review
  90. Development of probabilistic seismic hazard microzonation maps at the surface level for central-east Iran (Kerman region), using a hybrid site condition model
  91. Experimental investigations of resilient hybrid fiber reinforced SCC beam-column subassemblies under cyclic loadings
  92. Progressive collapse evaluation of RC frames under high-temperature conditions: Experimental and finite element investigations
  93. Assessment of Structural Performance of a historical Mosque under Static and dynamic loads: Burmali Mosque in Amasya, Turkey
  94. Interpretation of simultaneously optimized fuzzy controller and active tuned mass damper parameters under Pulse-type ground motions
  95. Performance of Solid Waste Landfills Under Earthquake-Induced Vibrations
  96. Using a Full-Scale Mock-Up of Skylight to Evaluate Its Performance Following Standards Criteria
  97. Rehabilitation of SDOF systems under air blast loading with a modified negative stiffness amplifying damper
  98. Development of a uniform seismic vulnerability index framework for reinforced concrete building typology
  99. An innovative methodology for hybrid vibration control (MR+TMD) of buildings under seismic excitations
  100. A reappraisal of active faults in central-east Iran (Kerman province)
  101. In-Plane measurements using a novel streamed digital image correlation for shake table test of steel structures controlled with MR dampers
  102. Optimal design of Magnetorheological damper for seismic response reduction of Base-Isolated structures considering Soil-Structure interaction
  103. A novel approach for deterioration and damage identification in building structures based on Stockwell-Transform and deep convolutional neural network
  104. On the seismic performance evaluation of dam-foundation-reservoir system for the effect of frequency content and foundation flexibility
  105. Effect of Link Beam Length of the Eccentric Bracing System on Seismic Rehabilitation of Weak Reinforced Concrete Frames
  106. Investigation of Resilience of Eccentrically Braced Frames Equipped with Shape Memory Alloys
  107. Acceleration Response-Based Adaptive Strategy for Vibration Control and Location Optimization of Magnetorheological Dampers in Multistoried Structures
  108. Effect of Flexibly Attached Secondary Systems on Dynamic Behavior of Light Structures
  109. Seismic Loss Estimation Using Experimental Fragility and Vulnerability Functions: Case Study of Buzau County, Romania
  110. A data-driven approach for linear and nonlinear damage detection using variational mode decomposition and GARCH model
  111. Cyclic Behavior of Masonry Shear Walls Retrofitted with Engineered Cementitious Composite and Pseudoelastic Shape Memory Alloy
  112. A Critical Review on Control Strategies for Structural Vibration Control
  113. Modified plate frame interaction method for evaluation of steel plate shear walls with beam-connected web plates
  114. Strengthening of RC beam-column joints using steel plate with shear connectors: Experimental investigation
  115. A state-of-the-art review on the experimental investigations of bendable concrete
  116. Experimental Study on the Behavior of Steel–Concrete Composite Decks with Different Shear Span-to-Depth Ratios
  117. A Novel MRE Adaptive Seismic Isolator Using Curvelet Transform Identification
  118. Shaking table tests and numerical investigations of a novel response-based adaptive control strategy for multi-story structures with magnetorheological dampers
  119. Finite Element Modeling of Self-Compacting Concrete Beams Under Shear
  120. Investigation of the Occurrence of Progressive Collapse in High-Rise Steel Buildings with Different Braced Configurations
  121. Development of empirical models for reinforced concrete flat-slab structures using experimental results
  122. Proposing a Novel Oriented Genetic Algorithm for Optimum Seismic Design of Steel Moment Resisting Frames
  123. Enhancing the Structural Performance of RC Beam-Column Joints Using a Novel Optimized Stochastic Lattice Structure
  124. Experimental and numerical investigations of a new hysteretic damper for seismic resilient steel moment connections
  125. Influence of Pulse-Like Near-Fault Ground Motions on the Base-Isolated Buildings with LRB Devices
  126. A Critical Review on Structural Health Monitoring: Definitions, Methods, and Perspectives
  127. Experimental characterization of quaternary blended mortar exposed to marine environment using mechanical strength, corrosion resistance and chemical composition
  128. Active control of building structures under seismic load using a new uniform deformation-based control algorithm
  129. Structural assessment of glass used in façade industry
  130. Investigation of proposed integrated control strategies based on performance and positioning of MR dampers on shaking table
  131. Scientific Perspectives to Earthquake Resistant Design of RC Buildings—A Global Approach
  132. Seismic Control of Base-Isolated Liquid Storage Tanks Subjected to Bi-directional Strong Ground Motions
  133. Reliability-Based Analysis and Design of Structures and Infrastructure
  134. Comparative seismic RISK assessment of existing RC buildings using seismic vulnerability index approach
  135. Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes
  136. Seismic performance assessment of multi-story steel frames with curved dampers and semi-rigid connections
  137. A hybrid seismic isolation system toward more resilient structures: Shaking table experiment and fragility analysis
  138. A Novel Lightweight Phase-changing Cooling Roof Tile
  139. Uniform deformation design of outrigger braced skyscrapers: A simplified method for the preliminary design stage
  140. Improved Vulnerability Index Methodology to Quantify Seismic Risk and Loss Assessment in Reinforced Concrete Buildings
  141. Seismic Performance Evaluation of a Recently Developed Magnetorheological Damper: Experimental Investigation
  142. Risk-Based Evaluation of Economic Feasibility for Strengthening of Low-Code RC Structures
  143. Deterioration and damage identification in building structures using a novel feature selection method
  144. Development of risk-targeted seismic hazard maps for the Iranian plateau
  145. Punching Shear Behavior of Flat Slabs Utilizing Reactive Powder Concrete with and without Flexural Reinforcement
  146. Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure
  147. Estimation of dynamic design parameters for buildings with multiple sliding non-structural elements using machine learning
  148. Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading
  149. Performance evaluation of curved damper truss moment frames designed using equivalent energy design procedure
  150. A Study on the Significance of the Design Parameters of Steel Plate Shear Walls Subjected to Monotonic Loading
  151. Seismic Behavior of Earth Dams with Different Reservoir Water Levels Under Near-Field and Far-Field Earthquakes
  152. The seismic vulnerability assessment methodologies: A state-of-the-art review
  153. Influence of soil-structure interaction (SSI) on optimal design of passive damping devices
  154. Trade-off Pareto optimum design of an innovative curved damper truss moment frame considering structural and non-structural objectives
  155. The effects of earthquake incidence angle on the seismic fragility of reinforced concrete box-girder bridges of unequal pier heights
  156. Simultaneous optimization approach for combined control–structural design versus the conventional sequential optimization method
  157. ESTIMATION OF DISPLACEMENT CAPACITY OF RECTANGULAR RC SHEAR WALLS USING EXPERIMENTAL AND ANALYTICAL DATABASE
  158. Investigating the efficiency of DDBD approaches for RC buildings
  159. Application of Buckling Restrained Braces to Upgrade Vertical Stiffness of Existing RC Frames
  160. Performance Evaluation of the Base Isolation Technique on the Blast Mitigation of Spatial Structures
  161. Assessment of Seismic Scenario-Structure Based Limit State Criteria for a Reinforced Concrete High-Rise Building
  162. Development of a novel cost-effective toggle-brace-curveddamper (TBCD) for mid-rise steel structures using multi-objective NSGA II optimization technique
  163. Estimation of Vibration Frequency of Structural Floors Using Combined Artificial Intelligence and Finite Element Simulation
  164. Supervised damage and deterioration detection in building structures using an enhanced autoregressive time-series approach
  165. Eco-friendly Hybrid Concrete Using Pozzolanic Binder and Glass Fibers
  166. Development of a Multiple Coil Magneto-Rheological Smart Damper to Improve the Seismic Resilience of Building Structures
  167. Editorial: New Trends and Developments on Structural Control & Health Monitoring
  168. An Intelligent Method to Cryptocurrency Price Variation Forecasting
  169. BASYS-MTB: An integrative structural simulation platform based on adjacency matrices
  170. Reliability Assessment and Sensitivity Analysis of Concrete Gravity Dams by Considering Uncertainty in Reservoir Water Levels and Dam Body Materials
  171. Reliability-Based Safety Evaluation of the BISTOON Historic Masonry Arch Bridge
  172. The efficiency of an improved seismic vulnerability index under strong ground motions
  173. Seismic Response of Building Structures with Sliding Non-structural Elements
  174. Ambient Vibration Testings and Field Investigations of Two Historical Buildings in Europe
  175. Probabilistic Safety Evaluation of a Concrete arch dam Based on Finite Element Modeling and A Reliability L-R Approach
  176. Noise and Vibration Control - From Theory to Practice
  177. Nonlinear Giant Magnetostrictive Actuator and Its Application in Active Control
  178. Direct Displacement Based Design of Reinforced Concrete Elevated Water Tanks Frame Staging
  179. Seismic Performance Evaluation of a Proposed Buckling-Restrained Brace for RC-MRFS
  180. Shake table tests and numerical investigation of a resilient damping device for seismic response control of building structures
  181. On the quantification of collapse margin of a retrofitted university building in Beirut using a probabilistic approach
  182. Statistical Prediction of Probable Seismic Hazard Zonation of Iran Using Self-organized Artificial Intelligence Model
  183. Development of seismic vulnerability index methodology for reinforced concrete buildings based on nonlinear parametric analyses
  184. Improvement of Building Resilience by Viscous Dampers
  185. Resilient Structures and Infrastructure
  186. New Trends in Structural Engineering
  187. Probabilistic Evaluation of Structural Pounding Between Adjacent Buildings Subjected to Repeated Seismic Excitations
  188. Assessment of Structure-Specific Fragility Curves for Soft Storey Buildings Implementing IDA and SPO Approaches
  189. Critical response evaluation of damped bilinear hysteretic SDOF model under long duration ground motion simulated by multi impulse motion
  190. Influence of concurrent horizontal and vertical ground excitations on the collapse margins of non-ductile RC frame buildings
  191. The influence of coupled horizontal–vertical ground excitations on the collapse margins of modern RC-MRFs
  192. Fragility assessment of RC-MRFs under concurrent vertical-horizontal seismic action effects
  193. Seismic Risk Analysis of Steel-MRFs by Means of Fragility Curves in High Seismic Zones
  194. Telescopic columns as a new base isolation system for vibration control of high-rise buildings