All Stories

  1. Influence of point cloud filtering on optical inspection of additive manufactured metal parts

    Article • Precision Engineering, October 2024, Elsevier

    Eduardo Cuesta

  2. Additive Manufacturing of Ceramic Reference Spheres by Stereolithography (SLA)

    Article • Applied Sciences, August 2024, MDPI AG

    Eduardo Cuesta

  3. Laser Triangulation Sensors Performance in Scanning Different Materials and Finishes

    Article • Sensors, April 2024, MDPI AG

    Eduardo Cuesta

  4. Characterisation of the Performance of a Structured Light Digitising Sensor by Using Different Materials and Surface Finishes

    Article • Key Engineering Materials, October 2023, Trans Tech Publications

    Eduardo Cuesta

  5. Optical Characterization of Materials for Precision Reference Spheres for Use with Structured Light Sensors

    Article • Materials, August 2023, MDPI AG

    Eduardo Cuesta

  6. Metrology Benchmarking of 3D Scanning Sensors Using a Ceramic GD&T-Based Artefact

    Article • Sensors, November 2022, MDPI AG

    Eduardo Cuesta

  7. Comparison of Chemical and Mechanical Surface Treatments on Metallic Precision Spheres for Using as Optical Reference Artifacts

    Article • Materials, May 2022, MDPI AG

    Eduardo Cuesta

  8. Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts

    Article • Rapid Prototyping Journal, January 2022, Emerald

    Eduardo Cuesta

  9. Evaluation of the influence of post-processing on the optical inspection accuracy of additively manufactured parts

    Article • IOP Conference Series Materials Science and Engineering, October 2021, Institute of Physics Publishing

    Eduardo Cuesta

  10. Feasibility analysis of using machinable glass ceramics to manufacture non-contact measurement approach metrological artefacts

    Article • IOP Conference Series Materials Science and Engineering, October 2021, Institute of Physics Publishing

    Eduardo Cuesta

  11. Validation of the sandblasting process in the manufacturing of precision spheres for non-contact metrology

    Article • IOP Conference Series Materials Science and Engineering, October 2021, Institute of Physics Publishing

    Eduardo Cuesta

  12. Testing the Sandblasting Process in the Manufacturing of Reference Spheres for Non-Contact Metrology Applications

    Article • Materials, September 2021, MDPI AG

    Eduardo Cuesta

  13. Laser line scanner aptitude for the measurement of Selective Laser Melting parts

    Article • Optics and Lasers in Engineering, March 2021, Elsevier

    Eduardo Cuesta

  14. Analysis of post-processing influence on the geometrical and dimensional accuracy of selective laser melting parts

    Article • Rapid Prototyping Journal, October 2020, Emerald

    Eduardo Cuesta

  15. Analysis of Modern Optical Inspection Systems for Parts Manufactured by Selective Laser Melting

    Article • Sensors, June 2020, MDPI AG

    Eduardo Cuesta

  16. Metrological evaluation of laser scanner integrated with measuring arm using optical feature-based gauge

    Article • Optics and Lasers in Engineering, October 2019, Elsevier

    Eduardo Cuesta

  17. Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors

    Article • Procedia Manufacturing, January 2019, Elsevier

    Eduardo Cuesta

  18. New procedure for qualification of structured light 3D scanners using an optical feature-based gauge

    Article • Optics and Lasers in Engineering, November 2018, Elsevier

    Eduardo Cuesta

  19. Knowledge base model for automatic probe orientation and configuration planning with CMMs

    Article • Robotics and Computer-Integrated Manufacturing, February 2018, Elsevier

    Eduardo Cuesta

  20. Analysis of influence factors on part quality in micro-SLA technology

    Article • Procedia Manufacturing, January 2017, Elsevier

    Eduardo Cuesta

  21. Metrological evaluation of Structured Light 3D scanning system with an optical feature-based gauge

    Article • Procedia Manufacturing, January 2017, Elsevier

    Eduardo Cuesta

  22. Testing coordinate measuring arms with a geometric feature-based gauge:in situfield trials

    Article • Measurement Science and Technology, March 2016, Institute of Physics Publishing

    Eduardo Cuesta

  23. Dynamic Deformations in Coordinate Measuring Arms Using Virtual Simulation

    Article • International Journal of Simulation Modelling, December 2015, DAAAM International

    Eduardo Cuesta

  24. KBE rules oriented to resources management in coordinates inspection by contact

    Article • Journal of Manufacturing Systems, October 2015, Elsevier

    Eduardo Cuesta

  25. Sensor Prototype to Evaluate the Contact Force in Measuring with Coordinate Measuring Arms

    Article • Sensors, June 2015, MDPI AG

    Eduardo Cuesta

  26. A A Statistical approach to prediction CMM drift behavior using a calibrated mechanical artefact

    Article • January 2015, De Gruyter

    Eduardo Cuesta, Fernando Sánchez Lasheras

  27. Categorization of Inspection Elements in Coordinates Measurement for a KBE Implementation

    Article • Procedia Engineering, January 2015, Elsevier

    Eduardo Cuesta

  28. Uncertainties on CMMs by Applying a Model of Corrections Based on a Global Metric, Monte Carlo and Neural Network Methods

    Article • Procedia Engineering, January 2015, Elsevier

    Eduardo Cuesta

  29. Development of a Force Sensor Prototype Integrated on a Coordinate Measuring Arm

    Article • Procedia Engineering, January 2015, Elsevier

    Eduardo Cuesta

  30. Influence of human factor in the AACMM performance: a new evaluation methodology

    Article • International Journal of Precision Engineering and Manufacturing, July 2014, Springer Science + Business Media

    Eduardo Cuesta

  31. The Use of Virtual Circles Gauge for a Quick Verification of Portable Measuring Arms

    Article • Key Engineering Materials, June 2014, Trans Tech Publications

    Eduardo Cuesta

  32. Development of a Behaviour Curve for Quality Evaluation with Optoelectronic Profilometers

    Article • Key Engineering Materials, June 2014, Trans Tech Publications

    Eduardo Cuesta

  33. A new concept of feature-based gauge for coordinate measuring arm evaluation

    Article • Measurement Science and Technology, May 2014, Institute of Physics Publishing

    Eduardo Cuesta

  34. Study of Virtual Features in the Performance of Coordinate Measuring Arms

    Article • Procedia Engineering, January 2014, Elsevier

    Eduardo Cuesta

  35. AACMM Performance Test: Influence of Human Factor and Geometric Features

    Article • Procedia Engineering, January 2014, Elsevier

    Eduardo Cuesta

  36. Application of a Force Sensor to Improve the Reliability of Measurement with Articulated Arm Coordinate Measuring Machines

    Article • Sensors, August 2013, MDPI AG

    Eduardo Cuesta

  37. A Wiki Collaborative Application for Teaching in Manufacturing Engineering

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Eduardo Cuesta

  38. Evaluation of AACMM Using the Virtual Circles Method

    Article • Procedia Engineering, January 2013, Elsevier

    Eduardo Cuesta

  39. Conformity Analysis in the Measurement of Machined Metal Surfaces with Optoelectronic Profilometer

    Article • Procedia Engineering, January 2013, Elsevier

    Eduardo Cuesta

  40. Feasibility Evaluation of Photogrammetry versus Coordinate Measuring Arms for the Assembly of Welded Structures

    Article • Advanced Materials Research, April 2012, Trans Tech Publications

    Eduardo Cuesta

  41. Evaluation of influence parameters on measurement reliability of coordinated measuring arms

    Article • January 2012, American Institute of Physics

    Eduardo Cuesta

  42. Methodology for identifying and representing knowledge in the scope of CMM inspection resource selection

    Article • January 2012, American Institute of Physics

    Eduardo Cuesta

  43. Study of the technical feasibility of photogrammetry and coordinated measuring arms for the inspection of welded structures

    Article • January 2012, American Institute of Physics

    Eduardo Cuesta

  44. Real-Time Contact Force Measurement System for Portable Coordinate Measuring Arms

    Article • January 2012, DAAAM International

    Eduardo Cuesta

  45. Development of a Virtual Machine for the Sheet Metal Bending Process Simulation for Educational Purposes

    Article • Materials Science Forum, July 2011, Trans Tech Publications

    Eduardo Cuesta

  46. A new process-based ontology for KBE system implementation: application to inspection process planning

    Article • The International Journal of Advanced Manufacturing Technology, April 2011, Springer Science + Business Media

    Eduardo Cuesta

  47. Methodology for comparison of laser digitizing versus contact systems in dimensional control

    Article • Optics and Lasers in Engineering, December 2010, Elsevier

    Eduardo Cuesta

  48. Conceptual principles and ontology for a KBE implementation in inspection planning

    Article • International Journal of Mechatronics and Manufacturing Systems, January 2010, Inderscience Publishers

    Eduardo Cuesta, Dr Susana Martínez

  49. Implementation of decision rules for CMM sampling in a KBE system

    Article • January 2010, Springer Science + Business Media

    Eduardo Cuesta

  50. Influence of surface material on the quality of laser triangulation digitized point clouds for reverse engineering tasks

    Article • September 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Eduardo Cuesta

  51. Analysis of laser scanning and strategies for dimensional and geometrical control

    Article • The International Journal of Advanced Manufacturing Technology, June 2009, Springer Science + Business Media

    Eduardo Cuesta

  52. Selection of Ambient Light for Laser Digitizing of Quasi-Lambertian Surfaces

    Article • January 2009, Springer Science + Business Media

    Eduardo Cuesta

  53. Influence of roughness on surface scanning by means of a laser stripe system

    Article • The International Journal of Advanced Manufacturing Technology, October 2008, Springer Science + Business Media

    Eduardo Cuesta

  54. Influencia del Acabado Superficial en el Digitalizado con Sensores de Triangulación por Láser

    Article • Información tecnológica, January 2008, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Eduardo Cuesta

  55. Validation of an information model for inspection with CMM

    Article • International Journal of Machine Tools and Manufacture, June 2005, Elsevier

    Eduardo Cuesta

  56. Aspectos analíticos y tecnológicos del proceso de punzonado de chapa (2da Parte)

    Article • Informador Técnico, December 2004, SENA - Libraries

    Eduardo Cuesta

  57. Automatización e Integración de la Inspección Dimensional con Máquinas de Medir por Coordenadas

    Article • Información tecnológica, January 2004, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Eduardo Cuesta

  58. Equipos y tecnologías para corte de chapa. Aspectos analíticos y tecnológicos del proceso de punzonado de chapa (1 parte)

    Article • Informador Técnico, December 2003, SENA - Libraries

    Eduardo Cuesta

  59. Automatic determination of bending sequences for sheet metal parts with parallel bends

    Article • International Journal of Production Research, January 2003, Taylor & Francis

    Eduardo Cuesta

  60. Accessibility analysis for star probes in automatic inspection of rotational parts

    Article • International Journal of Production Research, January 2002, Taylor & Francis

    Eduardo Cuesta

  61. Automatic selection of clamping surfaces in the turning process for rotational parts

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, January 2000, SAGE Publications

    Eduardo Cuesta

  62. Times and costs analysis for sheet-metal cutting processes in an integrated CAD/CAM system

    Article • International Journal of Production Research, June 1998, Taylor & Francis

    Eduardo Cuesta

  63. Design of special tools by CAD/CAM systems

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, January 1998, SAGE Publications

    Eduardo Cuesta

  64. Remaining management for automatic sheet-metal cutting

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Eduardo Cuesta

  65. REMAINING MANAGEMENT FOR AUTOMATIC SHEET-METAL CUTTING

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Eduardo Cuesta

  66. An automatic CAPP system for rotational parts

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Eduardo Cuesta