All Stories

  1. Quantifying the role of wall–plug interface shear in the uplift stability of jet-grouted bottom plugs
  2. Structural performance of repaired reinforced concrete beams with damaged compression zones: an experimental study using digital image correlation
  3. Settlement of Lime-Cement Stabilized Soft Clay: A Numerical Modeling Study
  4. Building Information Modeling as the Pillar of Intelligent Building Management and Maintenance
  5. Indoor Environment in Historic Buildings After Renovation
  6. Strain Hardening of Reinforcement in Reinforced Concrete Elements After Residual Deformations
  7. Assessment of the interaction between forced convection and a phase-change battery
  8. Numerical Investigation of Seismic Soil–Structure–Excavation Interaction in Sand
  9. Numerical Study of Seismic- Soil-Structure-Excavation Interaction in Sand
  10. Correction: Elshafei et al. Opportunities for Using Analytical Hierarchy Process in Green Building Optimization. Energies 2022, 15, 4490
  11. Analysis of the Current State of FM in Domestic and International Context
  12. Assessment of Visual Comfort in Industrial Halls: A Case Study
  13. Assessment of the Stress-Strain State of Restored RC Beams Using Digital Image Correlation (DIC)
  14. RC Beams with an Middle Phase of Reinforcement Damage
  15. Preserving the historical value and thermal properties of renovated buildings: The case of reconstructed town houses in Kosice, Slovakia
  16. Evaluation of the stress-strain state of the RC beam with the use of DIC
  17. Computer simulation for the seismic behaviour of bridge expansion joints enhanced with SMA: Case study
  18. Axial compressive and cyclic lateral behavior of a structural masonry prism constructed from crushed COVID ‐19 face masks concrete bricks
  19. Numerical Investigation of Large-Diameter Bored Piles under High-Strain Dynamic Testing: A Case Study in New Alamein City
  20. Flexural behavior of two-layer reinforced concrete slab with hollow cores
  21. Strengthening of hollow core precast prestressed reinforced concrete slabs using different techniques
  22. Development of a Model for Assessing the Reliability of RC Beams Strengthened Under 50% of ULS Load Using Monte Carlo Simulation
  23. CFRP Materials for Restoration of the Bearing Capacity of RC Beams With Damaged Rebar
  24. Refurbishment and Parametricism Case Study: “Sokel” (Stone Plinth)
  25. The Impact of Loggia Renovation on the Daylighting in a Residential Building
  26. Crack Resistance of RC Columns Strengthened By CFRP Under 30% of Uls Loading
  27. Optimal hysteresis of shape memory alloys for eliminating seismic pounding and unseating of movement joint systems
  28. Comparison of Daylight Levels Using Simulation Calculation Tools
  29. Elimination Options of Solar Heat Gains Through Transparent Surfaces–Review
  30. Strengthening of Reinforced Concrete Columns Using Ultra-High Performance Fiber-Reinforced Concrete Jacket
  31. Experimental investigation on the behavior of fly-ash based geopolymer reinforced concrete beams strengthened with CFRP
  32. Modern Thermal Energy Storage Systems Dedicated to Autonomous Buildings
  33. Techniques Used for Bond Strengthening of Sub-Standard Splices in Concrete: A Review Study
  34. Heat-air-moisture modeling for prediction of interior surface condensation of lift-and-slide window – Case study
  35. Shape exploration of a parametrically-designed cliff observatory
  36. Background
  37. Conclusions
  38. Designing with the Wind
  39. Wind-Adaptive Building Envelope
  40. Wind-Based Form-Finding of a Tensegrity Pavilion
  41. Wind-Driven Design
  42. Nonlinear Behavior of Bonded and Unbonded Two-Way Post-Tensioned Slabs Pre-Strengthened with CFRP Laminates
  43. Shape optimization during design for improving outdoor wind comfort and solar radiation in cities
  44. Mutual Interaction of Daylight and Overheating in the Attic Space in Summer Time
  45. Opportunities for Using Analytical Hierarchy Process in Green Building Optimization
  46. Influence of Light Reflection from the Wall and Ceiling Due to Color Changes in the Indoor Environment of the Selected Hall
  47. Green building outdoor thermal comfort in hot-desert climatic region
  48. Quantification of Air Change Rate by Selected Methods in a Typical Apartment Building
  49. Quality of life control by selected methods of air exchange in a typical apartment building
  50. Influence of the Adaptation of Balconies to Loggias on the Lighting Climate inside an Apartment Building under Cloudy Sky
  51. Wind-Based Parametric Design in the Changing Climate
  52. Wind flow around buildings of basic shapes with and without a wind-adaptive envelope
  53. Assessment of Thermal Insulation Properties of Envelope Structures of a Burgher House in Kosice
  54. Assessment of overcast sky daylight conditions in the premises of engineering operations considering two types of skylights
  55. Requirements and opinions of three groups of people (aged under 35, between 35 and 50, and over 50 years) to create a living space suitable for different life situations
  56. Influence of Roof Windows Area Changes on the Classroom Indoor Climate in the Attic Space: A Case Study
  57. Comparative analysis of selected glass systems by dynamic simulation using measured real environmental conditions
  58. Selected problems of thermal insulation of historical buildings
  59. Research of building structures in extreme climate conditions
  60. Building envelope adapting from and to the wind flow
  61. Hybrid design method for wind-adaptive architecture
  62. Assessment of the Working Environment in Terms of Visual Perception
  63. The Influence of the Initial Condition in the Transient Thermal Field Simulation Inside a Wall
  64. COMPARISON OF ENERGY EFFICIENCY PROPERTIES OF CHOICE TYPES OF INDIVIDUAL HOUSES
  65. VISUAL COMFORT ASSESMENT IN THE OFFICE: A CASE OF STUDY
  66. Visual Comfort Assessment in an Industrial Environment: A Case Study
  67. Questionnaire Data Evaluation - Living Space for Different Situations in Life
  68. Digitally Designed Airport Terminal Using Wind Performance Analysis
  69. Various Factors on the Energy Performance of Selected Family Houses
  70. STRUCTURAL ELEMENTS WITH TRANSPARENT WOOD IN ARCHITECTURE
  71. Long-term monitoring of the thermal insulation properties of building envelope structures in real climatic conditions
  72. Simulation of visual comfort in selected industrial hall
  73. Environmental Issues Related to the Elderly People in Different Life Situations
  74. SOLUTION OF THE AIR FLOW IN THE VENTILATED FACADE AND ITS EFFECT ON THE THERMAL CHARACTERISTICS OF THE PERIPHERAL WALL
  75. Daytime Lighting Assessment in Textile Factories Using Connected Windows in Slovakia: A Case Study
  76. Daytime Lighting Assessment in Textile Factories Using Connected Windows in Slovakia: A Case Study
  77. Daytime Lighting Assessment in Textile Factories Using Connected Windows in Slovakia: A Case Study
  78. Lighting Quality of Indoor Environment in Large Floor Buildings in Light Industry
  79. Integrated Lighting Efficiency Analysis in Large Industrial Buildings
  80. Integrated Lighting Efficiency Analysis in Large Industrial Buildings
  81. Integrated Lighting Efficiency Analysis in Large Industrial Buildings
  82. Shape Design and Analysis of Adaptive Structures
  83. Selected problems of temperature conditions in the interior of large area of single store halls
  84. Problems in the Designing of Acoustic Properties of Musical Rehearsals
  85. Case study of the drying of porous concrete
  86. In situ monitoring of internal surface temperature of the historic building envelope
  87. External Conditions and Thermal–Humidity Parameters Changes in Production Building
  88. Hygrothermal Initial Conditions - Case Studies
  89. Energy Consumption for Heating in Production Buildings
  90. Dynamic Thermal Properties of Uninsulated Rammed Earth Envelopes
  91. Dynamic Thermal Properties of Uninsulated Rammed Earth Envelopes
  92. Dynamic thermal properties of uninsulated rammed earth envelopes
  93. Numerical and experimental determination of in-structure temperature profiles
  94. Changing Social Structure in Europe calls for Tailor-made, Barrier-free Living and new Interior Design
  95. Removing Soil Moisture - a Case Study in the Reconstruction of the Church
  96. Experimentally Measured Boundary and Initial Conditions for Simulations
  97. Numerical Analysis of Window Structure Seating Depth Effects on Surface Temperature and Linear Thermal Transmittance
  98. Civil Engineering and Urban Planning III
  99. Impact of the climate conditions on waterproofing materials in long-term use in industrially polluted regions
  100. Analysis of Summer Overheating in Elementary School Building
  101. Transient Pulse Method for Measuring of Heat Conductivity of Autoclaved Aerated Concrete
  102. Numerical Analysis and Measurement Results of a Window Sill
  103. Measurements of Electricity Consumption In a Low-energy Building in Mid-Europe Climatic Conditions
  104. Analysis of Energy Balance in Elementary School Building
  105. Analysis of thermal energy demand and saving in industrial buildings: A case study in Slovakia
  106. Air distribution and temperature stratification in passive houses
  107. Embodied Energy of Stabilized Rammed Earth
  108. Airtightness of Buildings in Slovakia
  109. Effect of Air Heating System Distribution on Temperature Stratification in a Room
  110. Analysis of an Indoor Environment in Year-Round Operation
  111. Measuring Methodology and Results of Heat-Air-Moisture Performances at Building Envelope Levels
  112. Measurements of electric energy consumption in a low energy building in Slovak climatic conditions
  113. Piezoelectric Bender Transducers for Energy Harvesting Applications
  114. Impact of shading structure on energy demand and on risk of summer overheating ina low energy building
  115. POSSIBILITY OF CHOICES INDUSTRIAL HALL OBJECT RECONSTRUCTION