Contact

All Stories

  1. Thermal and tool path effects on forming force and surface integrity in heat-assisted single point incremental forming of AA1050 aluminum alloy

    Article • Case Studies in Thermal Engineering, March 2026, Elsevier

    Prof. Duc-Toan Nguyen

  2. Plastic deformation characterization of automotive dual-phase steel sheets using a non-associated flow rule framework

    Article • International Journal of Modern Physics B, February 2026, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  3. Derivative-based statistical analysis of energy dissipation and dynamic stability in ultrasonic-assisted deep drilling

    Article • International Journal of Modern Physics B, February 2026, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  4. Integrated experimental and thermo-mechanical investigation of temperature distribution and tensile failure mechanisms in dissimilar stainless steel 304–carbon steel welds

    Article • International Journal of Modern Physics B, February 2026, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  5. Integrated numerical–experimental framework for predicting fracture and formability in heat-assisted single point incremental forming of AA1050 aluminum sheets

    Article • International Journal of Modern Physics B, February 2026, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  6. Microstructural defects and failure mechanisms in dissimilar welds of austenitic stainless steel and carbon steel

    Article • International Journal of Modern Physics B, February 2026, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  7. Torque prediction in ultrasonic vibration assisted drilling for small and deep holes using AI

    Article • Transactions of the Canadian Society for Mechanical Engineering, January 2026, Canadian Science Publishing

    Prof. Duc-Toan Nguyen

  8. Integrated Experimental Study on Thickness Uniformity, Thinning Limit, and Forming Force in Heat-Assisted Single-Point Incremental Forming of AA1050 Aluminum Alloy

    Article • Journal of Materials Engineering and Performance, December 2025, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  9. An in-depth analysis of process parameter effects on forming forces in single point incremental forming of Al1050 aluminium sheets

    Article • Advances in Materials and Processing Technologies, December 2025, Taylor & Francis

    Prof. Duc-Toan Nguyen

  10. Parametric study and multi-objective optimization in heat-assisted single point incremental forming of AA1050 aluminum alloy using experimental design methods

    Article • The International Journal of Advanced Manufacturing Technology, November 2025, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  11. A Novel Dynamic Modeling Framework for Flexure Mechanism-Based Piezoelectric Stick–Slip Actuators with Integrated Design Parameter Analysis

    Article • Machines, September 2025, MDPI AG

    Prof. Duc-Toan Nguyen

  12. A NOVEL REINFORCEMENT LEARNING - BASED CONTROL APPROACH FOR GRID-INTERGRATED PV-FESS SYSTEMS USING INDUCTION MOTORS

    Article • TNU Journal of Science and Technology, May 2025, Thai Nguyen University - Journal of Science and Technology

    Prof. Duc-Toan Nguyen

  13. Formability Assessment of C1100 Pure-Copper Tube Considering an Enhanced Modified Maximum Force Criterion

    Article • Materials, April 2025, MDPI AG

    Prof. Duc-Toan Nguyen

  14. INVESTIGATION OF ELECTRODE WEAR AND SURFACE QUALITY IN POWDER MIXED ELECTRICAL DISCHARGE MACHINING (PMEDM) WITH LOW-FREQUENCY VIBRATION APPLIED TO THE WORKPIECE

    Article • Surface Review and Letters, April 2025, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  15. OPTIMIZATION OF SURFACE ROUGHNESS IN AISI D-3 MACHINING USING POWDER-MIXED ELECTRICAL DISCHARGE MACHINING WITH ALUMINUM POWDER

    Article • Surface Review and Letters, April 2025, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  16. SURFACE ROUGHNESS AND GEOMETRIC PRECISION IN ULTRASONIC VIBRATION-ASSISTED TURNING OF HARDENED 9CrSi ALLOY STEEL

    Article • Surface Review and Letters, March 2025, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  17. Finite Element Analysis of the Contact Pressure for Human–Seat Interaction with an Inserted Pneumatic Spring

    Article • Applied Sciences, March 2025, MDPI AG

    Prof. Duc-Toan Nguyen

  18. A Study Using Advanced Simulation Techniques and Statistical Analysis for Enhanced Precision of Cylinder Cup in Sheet Metal Deep Drawing Processes

    Article • January 2025, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  19. Improving parameters for achieving uniform cylindrical cup wall thickness in two-step deep drawing processes with SPCC sheet material

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, October 2024, SAGE Publications

    Prof. Duc-Toan Nguyen

  20. A Study on Yield Criteria Influence on Anisotropic Behavior and Fracture Prediction in Deep Drawing SECC Steel Cylindrical Cups

    Article • Materials, June 2024, MDPI AG

    Prof. Duc-Toan Nguyen

  21. Investigating the correlation between surface roughness and degree of chip segmentation in A7075 aluminum alloy milling across varied cutting speeds

    Article • Sadhana, June 2024, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  22. Enhancing EDM performance with multi-objective decision-making using copper-coated aluminum electrodes and TOPSIS methodology for Ti-6Al-4V machining

    Article • International Journal of Modern Physics B, May 2024, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  23. Improving Micro-EDM Machining Efficiency for Titanium Alloy Fabrication with Advanced Coated Electrodes

    Article • Micromachines, May 2024, MDPI AG

    Prof. Duc-Toan Nguyen

  24. A combined simulation and experimental investigation on tool radius influence on enhancing the formability SPIF process for Al1050 sheet material

    Article • International Journal of Modern Physics B, May 2024, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  25. Analyzing cutting force and vibration amplitude in high-speed milling of SKD11 steel with thermal assistance

    Article • International Journal of Modern Physics B, May 2024, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  26. Enhancing grid stability through predictive control and fuzzy neural networks in flywheel energy storage systems integration

    Article • International Journal of Modern Physics B, May 2024, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  27. Optimization and Modelling of Fracture Height in SECC Cylindrical Cup Deep Drawing Processes

    Article • Journal of Machine Engineering, March 2024, Wroclaw Board of Scientific Technical Societies Federation NOT

    Prof. Duc-Toan Nguyen

  28. Investigating Technological Parameters and TiN-Coated Electrodes for Enhanced Efficiency in Ti-6Al-4V Micro-EDM Machining

    Article • Metals, January 2024, MDPI AG

    Prof. Duc-Toan Nguyen

  29. A study on rocker arm defect inspection based on vision system

    Article • International Journal of Modern Physics B, January 2024, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  30. Optimizing micro-EDM with carbon-coated electrodes: A multi-criteria approach

    Article • International Journal of Modern Physics B, January 2024, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  31. Investigating the influence of high-speed machining with heat-assisted machining (HAM) on machinability of heat-treated SKD61 steel

    Article • International Journal of Modern Physics B, December 2023, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  32. Enhancing/Improving Forming Limit Curve and Fracture Height Predictions in the Single-Point Incremental Forming of Al1050 Sheet Material

    Article • Materials, November 2023, MDPI AG

    Prof. Duc-Toan Nguyen

  33. Novel model predictive control-based motion cueing algorithm for compensating centrifugal acceleration in KUKA robocoaster-based driving simulators

    Article • Science Progress, October 2023, SAGE Publications

    Prof. Duc-Toan Nguyen

  34. Predictive Modeling of Spring-Back Behavior in V-Bending of SS400 Steel Sheets under Elevated Temperatures Using Combined Hardening Laws

    Article • Applied Sciences, September 2023, MDPI AG

    Prof. Duc-Toan Nguyen

  35. A Study Utilizing Numerical Simulation and Experimental Analysis to Predict and Optimize Flange-Forming Force in Open-Die Forging of C45 Billet Tubes

    Article • Applied Sciences, August 2023, MDPI AG

    Prof. Duc-Toan Nguyen

  36. Investigating the impact of yield criteria and process parameters on fracture height of cylindrical cups in the deep drawing process of SPCC sheet steel

    Article • The International Journal of Advanced Manufacturing Technology, August 2023, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  37. Enhancing Fire Detection Technology: A UV-Based System Utilizing Fourier Spectrum Analysis for Reliable and Accurate Fire Detection

    Article • Applied Sciences, July 2023, MDPI AG

    Prof. Duc-Toan Nguyen

  38. Improved uniformity in cylindrical cup wall thickness at elevated temperatures using deep drawing process for SPCC sheet steel

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, June 2023, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  39. EMPIRICAL EVALUATION OF HIGH-SPEED MACHINING AND HEATING SUPPORT ON CUTTING TOOL WEAR AND SURFACE ROUGHNESS DURING PROCESSING OF HEAT-TREATED SKD61 STEEL

    Article • TNU Journal of Science and Technology, May 2023, Thai Nguyen University - Journal of Science and Technology

    Prof. Duc-Toan Nguyen

  40. The Impact of High-Speed and Thermal-Assisted Machining on Tool Wear and Surface Roughness during Milling of SKD11 Steel

    Article • Metals, May 2023, MDPI AG

    Prof. Duc-Toan Nguyen

  41. Effectiveness of Lubricants and Fly Ash Additive on Surface Damage Resistance under ASTM Standard Operating Conditions

    Article • Coatings, April 2023, MDPI AG

    Prof. Duc-Toan Nguyen

  42. Assessment of the Effect of Thermal-Assisted Machining on the Machinability of SKD11 Alloy Steel

    Article • Metals, April 2023, MDPI AG

    Prof. Duc-Toan Nguyen

  43. A study on the investigation of the microstructure of SKD61 steel after selected quenching and tempering processes

    Article • Modern Physics Letters B, February 2023, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  44. Simulation and experimental comparison study based on predicting forming limit curve of SUS304 sheet material

    Article • Modern Physics Letters B, February 2023, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  45. Validation of the magnetometer calibration algorithms based on geometric fitting

    Article • Modern Physics Letters B, February 2023, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  46. An efficient approach for traffic sign detection, classification, and localization applied for autonomous intelligent vehicles

    Article • Modern Physics Letters B, February 2023, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  47. Influence of heat treatment process on the hardness and material structure of SKD61 tool steel

    Article • Modern Physics Letters B, February 2023, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  48. Person re-identification from multiple surveillance cameras combining face and body feature matching

    Article • Modern Physics Letters B, February 2023, World Scientific Pub Co Pte Lt

    Prof. Duc-Toan Nguyen

  49. Comparative Analysis of Simulated and Experimental Results for SUS-304 Sheet Material in Incremental Sheet Metal Forming Process

    Article • January 2023, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  50. Parameter Identification of Chaboche Model for Aluminum Alloy Sheets Based on Differential Evolution Algorithm

    Article • Journal of Advanced Engineering and Computation, September 2022, Ton Duc Thang University

    Prof. Duc-Toan Nguyen

  51. Auto-Tuning parameters of motion cueing algorithms for high performance driving simulator based on Kuka Robocoaster

    Article • Science Progress, April 2022, SAGE Publications

    Prof. Duc-Toan Nguyen

  52. A Study for Improved Prediction of the Cutting Force and Chip Shrinkage Coefficient during the SKD11 Alloy Steel Milling

    Article • Machines, March 2022, MDPI AG

    Prof. Duc-Toan Nguyen

  53. A simulation and experimental study on the deep drawing process of SPCC sheet using the graphical method

    Article • Alexandria Engineering Journal, March 2022, Elsevier

    Prof. Duc-Toan Nguyen

  54. A comparative investigation on theoretical models for forming limit diagram prediction of automotive sheet metals

    Article • Mechanics Based Design of Structures and Machines, July 2021, Taylor & Francis

    Prof. Duc-Toan Nguyen

  55. False cue influence on motion cue quality for 10 motion cueing algorithms

    Article • Science Progress, July 2021, SAGE Publications

    Prof. Duc-Toan Nguyen

  56. Experimental Researches of Turning Hardened 9CrSi Alloy Tool Steel with Laser-Assisted Machining

    Article • Arabian Journal for Science and Engineering, April 2021, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  57. Graphical method based on modified maximum force criterion to indicate forming limit curves of 22MnB5 boron steel sheets at elevated temperatures

    Article • Journal of Iron and Steel Research International, February 2021, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  58. A Comparative Investigation on Theoretical Models for Forming Limit Diagram Prediction of Sheet Metals

    Article • January 2021, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  59. A Study on Vibration During Heat Assisted End Milling of SKD11 Tool Steel

    Article • January 2021, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  60. An Application of Kinect-Based 3D Scanning in Mechanical Engineering

    Article • January 2021, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  61. Effect of High-Speed Milling Parameters on Chip Shrinkage and Tool–Chip Junction Length of A6061 Alloy

    Article • January 2021, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  62. Optimization of Predicting Spring-Back When V-Bending for SS400 Steel Plate

    Article • January 2021, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  63. A numerical and experimental study on the hold-edge conditions and hole-expansion ratio of hole-blanking and hole-expansion tests for ferrite bainite steel (FB590) sheets

    Article • Ironmaking & Steelmaking Processes Products and Applications, November 2020, SAGE Publications

    Prof. Duc-Toan Nguyen

  64. A study on experiment and simulation to predict the spring-back of SS400 steel sheet in large radius of V-bending process

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Prof. Duc-Toan Nguyen

  65. A novel motion cueing algorithm integrated multi-sensory system–Vestibular and proprioceptive system

    Article • Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics, December 2019, SAGE Publications

    Prof. Duc-Toan Nguyen

  66. A Study on Partitioning Freeform Surface and Tool Selection Method for 3-Axes CNC Machining

    Article • Journal of the Korean Society for Precision Engineering, September 2019, Korean Society of Precision Engineering

    Prof. Duc-Toan Nguyen

  67. Application/Comparison Study of a Graphical Method of Forming Limit Curve Estimation for DP590 Steel Sheets

    Article • Journal of the Korean Society for Precision Engineering, September 2019, Korean Society of Precision Engineering

    Prof. Duc-Toan Nguyen

  68. Multi-Criteria Decision Making Using Preferential Selection Index in Titanium based Die-Sinking PMEDM

    Article • Journal of the Korean Society for Precision Engineering, September 2019, Korean Society of Precision Engineering

    Prof. Duc-Toan Nguyen, Dr Muthuramalingam Thangaraj

  69. Study on Cutting Force and Chip Shrinkage Coefficient during Thermal - Assisted Machining by Induction Heating of SKD11 Steel

    Article • Journal of the Korean Society for Precision Engineering, September 2019, Korean Society of Precision Engineering

    Prof. Duc-Toan Nguyen

  70. Rapid Prototyping for Sheet Metal Products

    Article • August 2019, IntechOpen

    Prof. Duc-Toan Nguyen

  71. Combined Hardening Behavior for Sheet Metal and its Application

    Article • August 2019, Advanced International Journals of Research (AIJR)

    Prof. Duc-Toan Nguyen

  72. A study on a deep-drawing process with two shaping states for a fuel-filter cup using combined simulation and experiment

    Article • Advances in Mechanical Engineering, August 2019, SAGE Publications

    Prof. Duc-Toan Nguyen

  73. Improving the Depth Accuracy and Assessment of Microsoft Kinect v2 Towards a Usage for Mechanical Part Modeling

    Article • Journal of the Korean Society for Precision Engineering, July 2019, Korean Society of Precision Engineering

    Prof. Duc-Toan Nguyen

  74. Experimental study on the chip morphology, tool–chip contact length, workpiece vibration, and surface roughness during high-speed face milling of A6061 aluminum alloy

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, July 2019, SAGE Publications

    Dr Tong Van-Canh, Prof. Duc-Toan Nguyen

  75. Combined numerical and experimental study to predict the forming limit curve of boron steel sheets at elevated temperatures

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, April 2019, SAGE Publications

    Prof. Duc-Toan Nguyen

  76. Material, Machines and Methods for Sustainable Development

    Article • March 2019, Trans Tech Publications

    Prof. Duc-Toan Nguyen

  77. Mechanical Properties of SS400 Steel Plate at Elevated Temperatures

    Article • Applied Mechanics and Materials, March 2019, Trans Tech Publications

    Prof. Duc-Toan Nguyen, Minh Nguyen T. H.

  78. A Simulation Study on Improving Formability of SUS304 Sheet Metal Deep Drawing Process

    Article • Applied Mechanics and Materials, March 2019, Trans Tech Publications

    Prof. Duc-Toan Nguyen

  79. Determining the Optimal Parameters of Chip Shrinkage Coefficient and Cutting Force in High-Speed Machining for Aluminum Alloy A6061

    Article • Applied Mechanics and Materials, March 2019, Trans Tech Publications

    Prof. Duc-Toan Nguyen

  80. Experimental Researching of Thermal - Assisted Milling with Induction on Surface Roughness of SKD11 Steel

    Article • Applied Mechanics and Materials, March 2019, Trans Tech Publications

    Prof. Duc-Toan Nguyen

  81. A Graphical Method to Estimate Forming Limit Curve of Sheet Metals

    Article • Key Engineering Materials, February 2019, Trans Tech Publications

    Pham Quoc Tuan, Prof. Duc-Toan Nguyen

  82. Cutting Force Model for Thermal-Assisted Machining of Tool Steel Based on the Taguchi Method

    Article • Metals, November 2018, MDPI AG

    Prof. Duc-Toan Nguyen

  83. Die steel surface layer quality improvement in titanium μ-powder mixed die sinking electrical discharge machining

    Article • The International Journal of Advanced Manufacturing Technology, October 2018, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  84. A study on spring-back in U-draw bending of DP350 high-strength steel sheets based on combined isotropic and kinematic hardening laws

    Article • Advances in Mechanical Engineering, September 2018, SAGE Publications

    Dr Tong Van-Canh, Prof. Duc-Toan Nguyen

  85. A study of combined finite element method simulation/experiment to predict forming limit curves of steel DP350 sheets

    Article • Advances in Mechanical Engineering, April 2018, SAGE Publications

    Prof. Duc-Toan Nguyen

  86. A study on the cutting force and chip shrinkage coefficient in high-speed milling of A6061 aluminum alloy

    Article • The International Journal of Advanced Manufacturing Technology, September 2017, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  87. Characteristics optimization of powder mixed electric discharge machining using titanium powder for die steel materials

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, February 2017, SAGE Publications

    Mr Nguyen Huu Phan, Prof. Duc-Toan Nguyen

  88. Simulation and experimental studies to verify the effect of cutting parameters on chip shrinkage coefficient and cutting forces in machining of A6061 aluminum alloy

    Article • Advances in Mechanical Engineering, October 2016, SAGE Publications

    Dr Tong Van-Canh, Prof. Duc-Toan Nguyen

  89. Surface quality analysis of die steels in powder-mixed electrical discharge machining using titan powder in fine machining

    Article • Advances in Mechanical Engineering, July 2016, SAGE Publications

    Mr Nguyen Huu Phan, Prof. Duc-Toan Nguyen

  90. Incremental forming of 3D structured aluminum sheet

    Article • International Journal of Precision Engineering and Manufacturing, February 2016, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  91. A Study on Yield Function for Ti–6Al–4V Titanium Alloy Sheets at Elevated Temperatures

    Article • Transactions of the Indian Institute of Metals, November 2015, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  92. Improving formability of tube bending for a copper material using finite element simulation

    Article • Journal of Mechanical Science and Technology, October 2015, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  93. Scientific and technological journals in Vietnam: the current state and direction of development

    Article • Science Editing, February 2015, Korean Council of Science Editors

    Prof. Duc-Toan Nguyen

  94. A New Constitutive Model for AZ31B Magnesium Alloy Sheet Deformed at Elevated Temperatures and Various Strain Rates

    Article • High Temperature Materials and Processes, February 2014, De Gruyter

    Prof. Duc-Toan Nguyen

  95. Formability improvement and blank shape definition for deep drawing of cylindrical cup with complex curve profile from SPCC sheets using FEM

    Article • Journal of Central South University, January 2014, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  96. A numerical study on establishing the forming limit curve and indicating the formability of complex shape in incremental sheet forming process

    Article • International Journal of Precision Engineering and Manufacturing, December 2013, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  97. Coupled thermomechanical finite element analysis to improve press formability for camera shape using AZ31B magnesium alloy sheet

    Article • Metals and Materials International, August 2012, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  98. Finite element method study to predict spring-back in roll-bending of pre-coated material and select bending parameters

    Article • International Journal of Precision Engineering and Manufacturing, July 2012, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  99. Flow stress equations of Ti-6Al-4V titanium alloy sheet at elevated temperatures

    Article • International Journal of Precision Engineering and Manufacturing, May 2012, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  100. A Modified Johnson–Cook Model to Predict Stress-strain Curves of Boron Steel Sheets at Elevated and Cooling Temperatures

    Article • High Temperature Materials and Processes, February 2012, De Gruyter

    Prof. Duc-Toan Nguyen

  101. Formability Predictions of Deep Drawing Process for Aluminum Alloy A1100-O Sheets by Using Combination FEM with ANN

    Article • Advanced Materials Research, February 2012, Trans Tech Publications

    Prof. Duc-Toan Nguyen

  102. A study on material modeling to predict spring-back in V-bending of AZ31 magnesium alloy sheet at various temperatures

    Article • The International Journal of Advanced Manufacturing Technology, December 2011, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  103. A Study on Developing Robustness Engineering by Using Stochastic Analysis Method

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Prof. Duc-Toan Nguyen

  104. A Development of Lancing Engineering Method for Lamp-CAN Stamping Process by Using Forming Analysis

    Article • Advanced Materials Research, September 2011, Trans Tech Publications

    Prof. Duc-Toan Nguyen

  105. A Study on Modified Maximum Force Criterion to Predict Forming Limit Curve of Stainless Steel Sheet

    Article • Advanced Materials Research, August 2011, Trans Tech Publications

    Prof. Duc-Toan Nguyen

  106. Application of Incremental Sheet Metal Forming for Automotive Body-In-White Manufacturing

    Article • Transactions of Materials Processing, July 2011, The Korean Society of Technology of Plasticity

    Prof. Duc-Toan Nguyen

  107. Incremental Sheet Metal Forming: Numerical Simulation and Rapid Prototyping Process to make an Automobile White‐Body

    Article • steel research international, March 2011, Wiley

    Prof. Duc-Toan Nguyen

  108. A Modified Johnson-Cook Model for Sheet Metal Forming at Elevated Temperatures and Its Application for Cooled Stress-Strain Curve and Spring-Back Prediction

    Article • January 2011, American Institute of Physics

    Prof. Duc-Toan Nguyen

  109. Ductile Fracture Prediction in Rotational Incremental Forming for Magnesium Alloy Sheets Using Combined Kinematic/Isotropic Hardening Model

    Article • Metallurgical and Materials Transactions A, May 2010, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  110. Combined kinematic/isotropic hardening behavior study for magnesium alloy sheets to predict ductile fracture of rotational incremental forming

    Article • International Journal of Material Forming, April 2010, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  111. Finite element method study of incremental sheet forming for complex shape and its improvement

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, January 2010, SAGE Publications

    Prof. Duc-Toan Nguyen

  112. Finite Element Method Simulations to Improve Press Formability of Door Hinge

    Article • Journal of Materials Engineering and Performance, November 2009, Springer Science + Business Media

    Prof. Duc-Toan Nguyen

  113. Combination of isotropic and kinematic hardening to predict fracture and improve press formability of a door hinge

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, October 2009, SAGE Publications

    Prof. Duc-Toan Nguyen