All Stories

  1. Solvothermally synthesized dopant-free anatase-titania nanostructures for efficient photocatalytic degradation of crystal violet under violet irradiation
  2. Development of electrospun scaffolds for bone regeneration from strontium-doped hydroxyapatite nanorods and thermoplastic polyurethane elastomer
  3. Design and Development of a High-Performance Gel Polymer Electrolyte for Na-Ion Battery from Halloysite Nanotube-Dispersed PVDF Nanofabrics
  4. Effect of Ni doping on the acetone vapor sensing performance of ZnO nanofibers
  5. Synthesis and characterization of Cu-doped ZnO nanofibers for ethanol vapor sensing
  6. Probing the influence of strontium doping and annealing temperature on the structure and biocompatibility of hydroxyapatite nanorods
  7. A Facile Strategy to Achieve High Piezoelectric Performance in Electrospun Poly(Vinylidene Fluoride) Non-woven Nanofabrics
  8. An Investigation on the Acetone and Ethanol Vapor-Sensing Behavior of Sol–Gel Electrospun ZnO Nanofibers Using an Indigenous Setup
  9. Understanding the interplay of solution and process parameters on the physico-chemical properties of ZnO nanofibers synthesized by sol-gel electrospinning
  10. Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics
  11. A new multifunctional energy harvester based on mica nanosheet-dispersed PVDF nanofabrics featuring piezo-capacitive, piezoelectric and triboelectric effects
  12. Synthesis and evaluation of a new gel polymer electrolyte for high-performance Li-ion batteries from electrospun nanocomposite of PVDF/Ca–Al-layered double hydroxide
  13. Polymer Nanocomposites-Based Wearable Smart Sensors
  14. Recent Developments of Polymer Electrolytes for Rechargeable Sodium-Ion Batteries
  15. Piezoelectric Energy Harvesting Using Flexible Self-Poled Electroactive Nanofabrics Based on PVDF/ZnO-Decorated SWCNT Nanocomposites
  16. Evaluation of piezoelectric behavior and biocompatibility of poly(vinylidene fluoride) ultrafine fibers with incorporated talc nanosheets
  17. Recent development in carbon dot-based gas sensors
  18. Physico-chemical and piezoelectric characterization of electroactive nanofabrics based on functionalized graphene/talc nanolayers/PVDF for energy harvesting
  19. Highly sensitive and wearable NO2 gas sensor based on PVDF nanofabric containing embedded polyaniline/g-C3N4 nanosheet composites
  20. Influence of multiwalled carbon nanotubes on the structure and properties of poly(ethylene‐ co ‐vinyl acetate‐ co ‐carbon monoxide) nanocomposites
  21. Dispersion analysis of nanofillers and its relationship to the properties of the nanocomposites
  22. Effect of nanofillers on the crystalline and mechanical properties of EVACO polymer nanocomposites
  23. Cationic surfactant assisted enhancement of dielectric and piezoelectric properties of PVDF nanofibers for energy harvesting application
  24. Magnetic behavior of polymorph composite nickel titanate nanofibers
  25. A study on electroactive PVDF/mica nanosheet composites with an enhanced γ-phase for capacitive and piezoelectric force sensing
  26. Structure-property relationship of glass fabric/MWCNT/epoxy multi-layered laminates
  27. Thermoplastic polyurethane composites reinforced with renewable and sustainable fillers – a review
  28. Development of a new flexible nanogenerator from electrospun nanofabric based on PVDF/talc nanosheet composites
  29. Effect of polarization switching on piezoelectric and dielectric performance of electrospun nanofabrics of poly(vinylidene fluoride)/Ca–Al LDH nanocomposite
  30. Sol-gel electrospun ZnMn2O4 nanofibers as bifunctional electrocatalysts for hydrogen and oxygen evolution reactions
  31. Polymorphism, dielectric and piezoelectric response of organo-modified Ni–Co layered double hydroxide nanosheets dispersed electrospun PVDF nanofabrics
  32. PVDF Nanofibers with Embedded Polyaniline–Graphitic Carbon Nitride Nanosheet Composites for Piezoelectric Energy Conversion
  33. Synergism of graphitic-carbon nitride and electrospinning on the physico-chemical characteristics and piezoelectric properties of flexible poly(vinylidene fluoride) based nanogenerator
  34. Polymorph nickel titanate nanofibers as bifunctional electrocatalysts towards hydrogen and oxygen evolution reactions
  35. PVDF/halloysite nanocomposite-based non-wovens as gel polymer electrolyte for high safety lithium ion battery
  36. Durable, efficient, and flexible piezoelectric nanogenerator from electrospun PANi/HNT/PVDF blend nanocomposite
  37. Pyrolysis-controlled synthesis and magnetic properties of sol–gel electrospun nickel cobaltite nanostructures
  38. A Mechanistic Study on the Structure Formation of NiCo2O4 Nanofibers Decorated with In Situ Formed Graphene-Like Structures
  39. Synergism of Electrospinning and Nano-alumina Trihydrate on the Polymorphism, Crystallinity and Piezoelectric Performance of PVDF Nanofibers
  40. Synergism of fictitious forces on nickel cobaltite nanofibers: electrospinning forces revisited
  41. Sol–gel electrospun mesoporous ZnMn2O4 nanofibers with superior specific surface area
  42. Some new observations on the structural and phase evolution of nickel titanate nanofibers
  43. Organoclay enabled nanofiber formation from a polyolefin elastomer
  44. Electroactive poly(vinylidene fluoride) fluoride separator for sodium ion battery with high coulombic efficiency
  45. Advances in Polymer Materials and Technology
  46. Polyaniline/poly(styrene-co-acrylonitrile) blend nanofibers exhibit enhanced ammonia and nitrogen dioxide sensing characteristics
  47. Characterization of composites based on biodegradable poly(vinyl alcohol) and nanostructured fly ash with an emphasis on polymer–filler interaction
  48. Structure–property relationship of halloysite nanotubes/ethylene–vinyl acetate–carbon monoxide terpolymer nanocomposites
  49. Tuning characteristics of Co3O4 nanofiber mats developed for electrochemical sensing of glucose and H2O2
  50. Optimised microwave-assisted biosynthesis of silver nanoparticles fromNothapodytes foetidaleaf extracts and its anti-microbial activities
  51. Ductility and Flame Retardancy Enhancement of PVC by Nanostructured Fly Ash
  52. Chitosan composites reinforced with nanostructured waste fly ash
  53. On-Demand Guided Bone Regeneration with Microbial Protection of Ornamented SPU Scaffold with Bismuth-Doped Single Crystalline Hydroxyapatite: Augmentation and Cartilage Formation
  54. Probing the synergism of halloysite nanotubes and electrospinning on crystallinity, polymorphism and piezoelectric performance of poly(vinylidene fluoride)
  55. Influence of planetary ball milling parameters on the mechano-chemical activation of fly ash
  56. Comparison of structural, spectral and magnetic properties of NiO nanofibers obtained by sol–gel electrospinning from two different polymeric binders
  57. Interparticle interactions and lacunarity of mechano-chemically activated fly ash
  58. Electrospinning of non-woven poly(styrene-co-acrylonitrile) nanofibrous webs for corrosive chemical filtration: Process evaluation and optimization by Taguchi and multiple regression analyses
  59. Morphological and structural characterisation of sol–gel electrospun Co3O4 nanofibres and their electro-catalytic behaviour
  60. A comparative study on the physico–chemical properties of sol–gel electrospun cobalt oxide nanofibres from two different polymeric binders
  61. Electrospun nickel oxide nanofiber webs for thermistor applications
  62. Structure–property relationship of sol–gel electrospun ZnO nanofibers developed for ammonia gas sensing
  63. Thermodynamic Miscibility and Thermal and Mechanical Properties of Poly(ethylene-co-vinyl acetate-co-carbon monoxide)/Poly(vinyl chloride) Blends
  64. Glass fiber–supported NiO nanofiber webs for reduction of CO and hydrocarbon emissions from diesel engine exhaust
  65. Nanostructured Fly Ash as Reinforcement in a Plastomer-Based Composite: A New Strategy in Value Addition to Thermal Power Station Fly Ash
  66. Use of nano-ATH as a multi-functional additive for poly(ethylene-co-vinyl acetate-co-carbon monoxide)
  67. Mechanical properties and sliding wear behavior of jatropha seed cake waste/epoxy composites
  68. Synthesis and characterisation of nickel oxide nanofibre webs with alcohol sensing characteristics
  69. Fabrication of styrene–acrylonitrile random copolymer nanofiber membranes from N,N-dimethyl formamide by electrospinning
  70. Solution electrospinning of styrene-acrylonitrile random copolymer from dimethyl sulfoxide
  71. Epoxy/Glass-Fabric/Silica Hybrid Composites: Mechanical Properties and Wear Behavior
  72. Structural characterization of nano-crystalline Co3O4 ultra-fine fibers obtained by sol–gel electrospinning
  73. Chemical-resistant Ultrafine Poly(styrene-co-acrylonitrile) Fibers by Electrospinning: Process Optimization by Design of Experiment
  74. Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites
  75. Thermoplastic vulcanizates from post consumer computer plastics/nitrile rubber blends by dynamic vulcanization
  76. Influence of organically modified clay mineral on domain structure and properties of segmented thermoplastic polyurethane elastomer
  77. Parametric study of manufacturing ultrafine polybenzimidazole fibers by electrospinning
  78. Poly(ethylene-co-vinyl acetate-co-carbon monoxide)/Layered Silicate Nanocomposites: Preparation, Characterization and Properties
  79. Extruded poly(ethylene-co-octene)/fly ash composites – value added products from an environmental pollutant
  80. Polymer Nanocomposites: From Synthesis to Applications
  81. Characterization of poly(ethylene-co-vinyl acetate-co-carbon monoxide)/layered silicate clay hybrids obtained by melt mixing
  82. Waste Rubber Recycling
  83. Waste natural gum as a multifunctional additive in rubber
  84. Synthesis and characterization ofin situ polymerized segmented thermoplastic elastomeric polyurethane/layered silicate clay nanocomposites
  85. Novel Thermoplastic Elastomers Based on Acrylonitrile-Butadiene-Styrene Terpolymer (ABS) from Waste Computer Equipment and Nitrile Rubber
  86. Thermorheological studies of novel thermoplastic elastomeric blends of nitrile rubber (NBR) and scrap computer plastics (SCP) based on acrylonitrile–butadiene–styrene terpolymer (ABS)
  87. Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile). II. Replacement of nitrile rubber by its vulcanizate powder
  88. Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile). I. Effect of mixing sequence and dynamic vulcanization on mechanical properties