Contact

All Stories

  1. Enhancing Thermal Performance of Protective Textiles through Smart and Sustainable Fabric with Internal Structure Adjustments

    Article • July 2024, Taylor & Francis

    Dr. Virendra Kumar

  2. Model tests on ordinary and geosynthetic encased stone columns with recycled aggregates as filler material

    Article • International Journal of Geo-Engineering, January 2024, Springer Science + Business Media

    Dr. Virendra Kumar

  3. Thermodynamic evaluation of water-cooled photovoltaic thermal system with PCM-based thermal energy storage

    Article • Sadhana, January 2024, Springer Science + Business Media

    Dr. Virendra Kumar

  4. A Review on Solid Oxide Fuel Cell Technology: An Efficient Energy Conversion System

    Article • International Journal of Energy Research, January 2024, Wiley

    Dr. Virendra Kumar

  5. Experimental probe into an automative engine run on waste cooking oil biodiesel blend at varying engine speeds

    Article • Fuel, August 2023, Elsevier

    Dr. Virendra Kumar

  6. Recovered Reverse-Osmosis Water and MgO Nanoparticles for Improved Performance of Solar PV/T Systems

    Article • Water, July 2023, MDPI AG

    Dr. Virendra Kumar

  7. An investigation of combined effect of infill pattern, density, and layer thickness on mechanical properties of 3D printed ABS by fused filament fabrication

    Article • Heliyon, June 2023, Elsevier

    Dr. Virendra Kumar

  8. Biodiesel as a potential replacement fuel for CI engine to meet the sustainability criteria: A review

    Article • Materials Today Proceedings, April 2023, Elsevier

    Dr. Virendra Kumar

  9. Design of CRMC non-adiabatic supersonic nozzle with frictional effect

    Article • Materials Today Proceedings, March 2023, Elsevier

    Dr. Virendra Kumar

  10. Selection of Response Reduction Factor Considering Resilience Aspect

    Article • Buildings, February 2023, MDPI AG

    Dr. Virendra Kumar

  11. Seismic hazard analysis of Silchar city located in North East India

    Article • Geomatics Natural Hazards and Risk, January 2023, Taylor & Francis

    Dr. Virendra Kumar

  12. Numerical assessment on constant rate of kinetic energy change (CKREC) based variable area supersonic nozzle

    Article • Materials Today Proceedings, January 2023, Elsevier

    Dr. Virendra Kumar

  13. Adsorption of trivalent and pentavalent arsenic ions from the aqueous stream using natural Bombax ceiba fibers: Insights from density functional theory calculations

    Article • Total Environment Research Themes, December 2022, Elsevier

    Dr. Virendra Kumar

  14. Effectiveness of LRB in Curved Bridge Isolation: A Numerical Study

    Article • Applied Sciences, November 2022, MDPI AG

    Dr. Virendra Kumar

  15. Life cycle environmental sustainability and cumulative energy assessment of biomass pellets biofuel derived from agroforest residues

    Article • PLOS One, October 2022, PLOS

    Dr. Virendra Kumar

  16. Mechanical properties of AA6061T6 and AA6351T6 plates joined by friction stir welding

    Article • Materialwissenschaft und Werkstofftechnik, August 2022, Wiley

    Dr. Virendra Kumar, Ritesh Jaiswal

  17. Numerical Analysis on a Constant Rate of Kinetic Energy Change Based a Two-Stage Ejector-Diffuser System

    Article • Strojniški vestnik – Journal of Mechanical Engineering, May 2022, Faculty of Mechanical Engineering

    Dr. Virendra Kumar

  18. Evaluation of Physical, Mechanical, and Wear Properties of Jatropha Shell Powder Reinforced Epoxy Glass Fiber Composites

    Article • Journal of Natural Fibers, March 2022, Taylor & Francis

    Dr. Virendra Kumar

  19. Numerical study for the influences of nozzle exit position, mixing, and diffuser section lengths on performance of CRMC ejector

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, October 2021, Springer Science + Business Media

    Dr. Virendra Kumar

  20. Physico-Mechanical Properties and Taguchi Optimized Abrasive Wear of Alkali Treated and Fly Ash Reinforced Himalayan Agave Fiber Polyester Composite

    Article • Journal of Natural Fibers, October 2021, Taylor & Francis

    Dr. Virendra Kumar, Dr. Sanjeev Kumar

  21. Numerical assessment on the performance of variable area single- and two-stage ejectors: A comparative study

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, August 2021, SAGE Publications

    Dr. Virendra Kumar

  22. In Situ Formation of ZrB2 and Its Influence on Wear and Mechanical Properties of ADC12 Alloy Mixed Matrix Composites

    Article • Materials, April 2021, MDPI AG

    Dr Anil Kumar, Dr. Virendra Kumar

  23. Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites

    Article • Polymers, April 2021, MDPI AG

    Dr Anil Kumar, Dr. Virendra Kumar, Dr. Sanjeev Kumar

  24. Physical and Mechanical Properties of Rambans (Agave) Fiber Reinforced with Polyester Composite Materials

    Article • Journal of Natural Fibers, March 2021, Taylor & Francis

    Dr. Virendra Kumar

  25. Comparative study of the VINCI Robot's arm end effector matrix using Python and MATLAB

    Article • Materials Today Proceedings, March 2021, Elsevier

    Dr. Virendra Kumar

  26. Effect of Variation of SiC Reinforcement on Wear Behaviour of AZ91 Alloy Composites

    Article • Materials, February 2021, MDPI AG

    Dr Anil Kumar, Dr. Virendra Kumar

  27. Investigation of mechanical and tribological performance of marble dust 7075 aluminium alloy composites

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Anil Kumar, Dr. Virendra Kumar

  28. Computational analysis of a supersonic two-stage ejector

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. Virendra Kumar

  29. Development of the constant rate of momentum change (CRMC) variable area nozzle

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. Virendra Kumar

  30. Fabrication and evaluation of physical and mechanical properties of jute and coconut coir reinforced polymer matrix composite

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. Virendra Kumar

  31. Comparison of Static and Harmonic Response of Structural Steel and Aluminium Alloy Automotive Shock Absorbers

    Article • January 2021, Springer Science + Business Media

    Dr. Virendra Kumar

  32. Physical and Mechanical Behaviour of Sugarcane Bagasse Fibre-Reinforced Epoxy Bio-Composites

    Article • Materials, November 2020, MDPI AG

    Dr. Virendra Kumar

  33. Optimization of process parameters during WEDM of EN-42 spring steel

    Article • SN Applied Sciences, April 2020, Springer Science + Business Media

    Dr Anil Kumar, Dr. Virendra Kumar

  34. Effect of nozzle exit position (NXP) on variable area mixing ejector

    Article • SN Applied Sciences, October 2019, Springer Science + Business Media

    Dr. Virendra Kumar

  35. Mechanical Performance of Jute and Basalt Fiber Geo-grid-Reinforced Epoxy Hybrid Composite Material

    Article • Journal of Natural Fibers, August 2019, Taylor & Francis

    Dr. Lalta Prasad , Dr. Virendra Kumar

  36. Heat transfer augmentation in automobile radiator using Al2O3–water based nanofluid

    Article • SN Applied Sciences, February 2019, Springer Science + Business Media

    Dr Anil Kumar, Dr. Virendra Kumar

  37. Properties of functionally gradient composites reinforced with waste natural fillers

    Article • Acta periodica technologica, January 2019, National Library of Serbia

    Dr Anil Kumar, Dr. Virendra Kumar

  38. A Comparative Study on Mechanical and Dry Sliding Wear Behaviour of Al 7075-T6 Welded Joints Fabricated by FSW, TIG and MIG

    Article • December 2018, Springer Science + Business Media

    Dr. Virendra Kumar

  39. Realization of novel constant rate of kinetic energy change (CRKEC) supersonic ejector

    Article • Energy, December 2018, Elsevier

    Dr. Virendra Kumar

  40. Thermal degradation and gasification characteristics of Tung Shells as an open top downdraft wood gasifier feedstock

    Article • Clean Technologies and Environmental Policy, December 2014, Springer Science + Business Media

    Dr. Virendra Kumar

  41. Study of supersonic flow in a constant rate of momentum change (CRMC) ejector with frictional effects

    Article • Applied Thermal Engineering, October 2013, Elsevier

    Dr. Virendra Kumar

  42. CFD Analysis of Twin Jet Flow At Mach 1.74with Fluent Software

    Article • International Journal of Environmental Science and Development, January 2010, EJournal Publishing

    Dr. Virendra Kumar

  43. CFD Analysis of Four Jet Flow at Mach 1.74 with Fluent Software

    Article • International Journal of Chemical Engineering and Applications, January 2010, EJournal Publishing

    Dr. Virendra Kumar

  44. International Journal of Environmental Science and Development

    Article • International Journal of Environmental Science and Development, EJournal Publishing

    Dr. Virendra Kumar