All Stories

  1. Multiobjective optimization of RMD welding parameters for ASTM A387 steel using Taguchi method and artificial neural networks

    Article • Measurement, February 2026, Elsevier

    Dr. Din Bandhu

  2. Synergistic enhancement of Al-Si7Mg alloy: Strengthening mechanical properties through combined electromagnetic agitation and AL-10%Ti refinement

    Article • PLOS One, January 2026, PLOS

    Dr. Din Bandhu

  3. Predicting Consumer Adoption of Luxury Products via Instagram Marketing: A Machine Learning Approach

    Article • F1000Research, October 2025, Faculty of 1000, Ltd.

    Dr. Din Bandhu

  4. Predicting Consumer Adoption of Luxury Products via Instagram Marketing: A Machine Learning Approach

    Article • F1000Research, September 2025, Faculty of 1000, Ltd.

    Dr. Din Bandhu

  5. Optimizing diesel engine performance and emissions with mahua biodiesel blends using taguchi methodology

    Article • PLOS One, September 2025, PLOS

    Dr. Din Bandhu

  6. Experimental study on the performance of a 3D-Printed model of a Tesla turbine

    Article • Results in Engineering, September 2025, Elsevier

    Dr. Din Bandhu

  7. A study on porosity and mechanical properties of the open aluminum metal foam through spark plasma sintering SDP technique

    Article • The International Journal of Advanced Manufacturing Technology, January 2025, Springer Science + Business Media

    Dr. Din Bandhu

  8. EFFECTS OF ALKALI TREATMENT ON THE MECHANICAL, CHEMICAL, AND THERMAL PROPERTIES OF ARAMID AND GRASS FIBER-REINFORCED EPOXY HYBRID COMPOSITES

    Article • Composites Mechanics Computations Applications An International Journal, January 2025, Begell House

    Dr. Din Bandhu

  9. Comparative performance analysis of recuperative helium and supercritical CO₂ Brayton cycles for high-temperature energy systems

    Article • Energy, December 2024, Elsevier

    Dr. Din Bandhu

  10. Development and mechanical properties evaluation of environmentally sustainable composite material using various reinforcements with epoxy

    Article • Case Studies in Construction Materials, December 2024, Elsevier

    Dr. Din Bandhu

  11. Investigating the structural properties and wear resistance of martensitic stainless steels

    Article • PLOS One, November 2024, PLOS

    Dr. Din Bandhu

  12. Sustainable decision-making approach for operational excellence considering emerging technologies and energy sources: a review

    Article • Discover Sustainability, September 2024, Springer Science + Business Media

    Dr. Din Bandhu

  13. Design and development of a modular hydroponic tower with topology optimization

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), August 2024, Springer Science + Business Media

    Dr. Din Bandhu

  14. Role of fiber orientation and design on thermal and mechanical properties of natural composite

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), August 2024, Springer Science + Business Media

    Dr. Din Bandhu

  15. Experimental and numerical investigation of the solid cold-welding properties of the APB process of Al/Cu bulk composites

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), July 2024, Springer Science + Business Media

    Dr. Din Bandhu

  16. Effect of ARB process on the plane stress fracture toughness, creep properties and forming limit diagram of Aluminum/BN/Copper composite strips

    Article • Physica Scripta, July 2024, Institute of Physics Publishing

    Dr. Din Bandhu

  17. Enhancing the mechanical properties of composite films adding granite powder for sustainable packaging solutions

    Article • Advances in Materials and Processing Technologies, July 2024, Taylor & Francis

    Dr. Din Bandhu

  18. Machine learning classification approach for predicting tensile strength in aluminium alloy during friction stir welding

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), July 2024, Springer Science + Business Media

    Dr. Din Bandhu

  19. Optimizing wire electrical discharge machining performance of Inconel 625 with genetic algorithms & particle swarm optimization

    Article • Journal of Materials Research and Technology, July 2024, Elsevier

    Dr. Din Bandhu

  20. Enhancing machining performance of Inconel 825 alloy using grey relation analysis and JAYA-TLBO optimization techniques

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), May 2024, Springer Science + Business Media

    Dr. Din Bandhu

  21. Influence of inconel interlayer on microstructural, mechanical and electrochemical characteristics in single-pass ATIG welding of dissimilar austenitic and duplex stainless steel

    Article • Materials Research Express, May 2024, Institute of Physics Publishing

    Dr. Din Bandhu

  22. Effects of low-power laser hardening on the mechanical and metallurgical properties of biocompatible SAE 420 steel

    Article • Journal of Materials Research and Technology, May 2024, Elsevier

    Dr. Din Bandhu

  23. Thermo-electric modeling and analysis of lithium-ion battery pack for E-mobility

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), April 2024, Springer Science + Business Media

    Dr. Din Bandhu

  24. Abrasive waterjet machining of titanium alloy using an integrated approach of taguchi-based passing vehicle search algorithm

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), April 2024, Springer Science + Business Media

    Dr. Din Bandhu

  25. Analysis of Deep Drawing Quality Steel Using Incremental Hole Flanging with Different Pre-Cut Hole Diameters

    Article • April 2024, Taylor & Francis

    Dr. Din Bandhu

  26. Non-invasive glucometer monitoring system through optical based near-infrared sensor method

    Article • Computer Methods in Biomechanics and Biomedical Engineering Imaging & Visualization, April 2024, Taylor & Francis

    Dr. Din Bandhu

  27. Theories of motivation: A comprehensive analysis of human behavior drivers

    Article • Acta Psychologica, April 2024, Elsevier

    Dr. Din Bandhu

  28. Application of metal cored filler wire for environmental-friendly welding of low alloy steel: experimental investigation and parametric optimization

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), March 2024, Springer Science + Business Media

    Dr. Din Bandhu

  29. Human–machine interaction and implementation on the upper extremities of a humanoid robot

    Article • Discover Applied Sciences, March 2024, Springer Science + Business Media

    Dr. Din Bandhu

  30. Recycling of agro-industrial waste by fabricating laminated Al-metal matrix composites: a numerical simulation and experimental study

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), March 2024, Springer Science + Business Media

    Dr. Din Bandhu

  31. Machining performance optimization of graphene carbon fiber hybrid composite using TOPSIS-Taguchi approach

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), February 2024, Springer Science + Business Media

    Dr. Din Bandhu

  32. Machinability study of laser beam drilling on GFRP composites using Taguchi-based grey relational analysis

    Article • January 2024, American Institute of Physics

    Kumar abhishek, Dr. Din Bandhu

  33. Advancing Microchannel Fabrication: Tool‐Innovated Die Sink Electrodischarge Machining

    Article • Journal of Engineering, January 2024, Wiley

    Dr. Din Bandhu, Meenakshi Reddy R

  34. Multistage Scheduling of VPP Under Distributed Locational Marginal Prices and LCOE Evaluation

    Article • IEEE Access, January 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Din Bandhu

  35. Stretch-forming characteristics of austenitic material stainless steel 304 at hot working temperatures

    Article • High Temperature Materials and Processes, January 2024, De Gruyter

    Dr. Din Bandhu

  36. Experimental and simulation study for mechanical properties characterisation of green natural reinforced composites

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), December 2023, Springer Science + Business Media

    Dr. Din Bandhu

  37. Mechanical properties and morphology of the Balanites aegyptiaca composite

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, December 2023, SAGE Publications

    Dr Madhusudhan Reddy, Dr. Din Bandhu

  38. Effective removal of Congo red dye using adsorbent prepared from bio-waste: isotherm, kinetic, and thermodynamic studies

    Article • Biomass Conversion and Biorefinery, December 2023, Springer Science + Business Media

    Dr. Din Bandhu

  39. Evaluation of surface roughness of novel Al-based MMCs using Box-Cox transformation

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), October 2023, Springer Science + Business Media

    Dr. Din Bandhu

  40. Flexural and impact response of bamboo and pineapple leaf fiber reinforced composites using experimental and numerical techniques

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), October 2023, Springer Science + Business Media

    Dr. Din Bandhu

  41. Sustainable shape formation of multifunctional carbon fiber-reinforced polymer composites: A study on recent advancements

    Article • Mechanics of Advanced Materials and Structures, September 2023, Taylor & Francis

    Dr. Din Bandhu

  42. Development of cellulose nanocomposites for electromagnetic shielding applications by using dynamic network

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, September 2023, SAGE Publications

    Dr. Din Bandhu

  43. Predicting the thermal performance of screen mesh wick heat pipe with alumina nanofluids using response surface methodology

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), September 2023, Springer Science + Business Media

    Dr. Din Bandhu

  44. Hybrid Composite for Lightweight Applications

    Article • Journal of Materials Research and Technology, September 2023, Elsevier

    Dr Madhusudhan Reddy, Dr. Din Bandhu

  45. Appearance of reinforcement, interfacial product, heterogeneous nucleant and grain refiner of MgAl2O4 in aluminium metal matrix composites

    Article • Journal of Materials Research and Technology, September 2023, Elsevier

    Dr. Din Bandhu

  46. Influence of twin-screw elements on dispersion of nano-clay in vinyl ester polymer composites using Taguchi’s orthogonal array technique

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), August 2023, Springer Science + Business Media

    Dr. Din Bandhu

  47. CFD simulation analysis of a rectangular chambered muffler model for a C.I. engine

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), August 2023, Springer Science + Business Media

    Dr. Din Bandhu

  48. Parametric analysis of processing variables for enhanced adhesion in metal-polymer composites fabricated by fused deposition modeling

    Article • Journal of Adhesion Science and Technology, June 2023, Taylor & Francis

    Dr. Din Bandhu

  49. Exploring the potential of metal-cored filler wire in gas metal arc welding for ASME SA387-Gr.11-Cl.2 steel joints

    Article • Journal of Adhesion Science and Technology, June 2023, Taylor & Francis

    Dr. Din Bandhu

  50. Machining behavior investigation of aluminium metal matrix composite reinforced with TiC particulates

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), June 2023, Springer Science + Business Media

    Dr. Din Bandhu

  51. The influence of flow blockage elements at the orifice exit on the hydrodynamic and thermal performances of impinging square jets - an experimental investigation

    Article • Heat and Mass Transfer, May 2023, Springer Science + Business Media

    Dr. Din Bandhu

  52. Elucidating the Effect of Friction Stir Welding Variables on HDPE Sheets Using Grey Integrated with Fuzzy: Experimental Investigation and Parametric Optimization

    Article • JOM, May 2023, Springer Science + Business Media

    Dr. Din Bandhu

  53. Recent trends in parametric influence and microstructural analysis of friction stir welding for polymer composites

    Article • Advances in Materials and Processing Technologies, March 2023, Taylor & Francis

    Dr. Din Bandhu

  54. Performance optimization and investigation of metal-cored filler wires for high-strength steel during gas metal arc welding

    Article • High Temperature Materials and Processes, January 2023, De Gruyter

    Hemenkumar Thakar, Dr. Din Bandhu

  55. Industrial and market opportunities in hybrid additive manufacturing

    Article • Innovation and Emerging Technologies, January 2023, World Scientific Pub Co Pte Lt

    Dr. Din Bandhu

  56. Innovative Approaches to Thermal Management in Next-Generation Electronics

    Article • E3S Web of Conferences, January 2023, EDP Sciences

    Dr. Din Bandhu

  57. Revolutionizing Material Science: Exploring the Novel Applications of Thermally-Enhanced Processes in Next-Generation Materials

    Article • E3S Web of Conferences, January 2023, EDP Sciences

    Dr. Din Bandhu

  58. A Hybrid Ensemble Learning Model for Evaluating the Surface Roughness of AZ91 Alloy during the End Milling Operation

    Article • Surface Review and Letters, December 2022, World Scientific Pub Co Pte Lt

    Dr. Din Bandhu

  59. Optimization of Selective Laser Melting Parameter for Invar Material by Using JAYA Algorithm: Comparison with TLBO, GA and JAYA

    Article • Materials, November 2022, MDPI AG

    Dr. Din Bandhu

  60. Effect of Metal-Cored Filler Wire on Surface Morphology and Micro-Hardness of Regulated Metal Deposition Welded ASTM A387-Gr.11-Cl.2 Steel Plates

    Article • Materials, September 2022, MDPI AG

    Dr. Din Bandhu

  61. Effect of Various Lubricating Strategies on Machining of Titanium Alloys: A State-of-the-Art Review

    Article • Coatings, August 2022, MDPI AG

    Dr. Din Bandhu

  62. Influence of Regulated Metal Deposition and Gas Metal Arc Welding on ASTM A387-11–2 Steel Plates: As-deposited Inspection, Microstructure, and Mechanical Properties

    Article • Journal of Materials Engineering and Performance, August 2022, Springer Science + Business Media

    Dr. Din Bandhu

  63. Experimental study on application of gas metal arc welding based regulated metal deposition technique for low alloy steel

    Article • Materials and Manufacturing Processes, March 2022, Taylor & Francis

    Dr. Din Bandhu

  64. Multi-Attribute Group Decision Making (MAGDM) Using Fuzzy Linguistic Modeling Integrated With the VIKOR Method for Car Purchasing Model

    Article • International Journal of Decision Support System Technology, March 2022, IGI Global

    Dr. Din Bandhu

  65. Design and Fabrication of Mini Woodworking Lathe Machine

    Article • January 2022, Springer Science + Business Media

    Dr. Din Bandhu

  66. Design of Bluetooth-Controlled Floor Cleaning Robot

    Article • January 2022, Springer Science + Business Media

    Dr. Din Bandhu

  67. Stress analysis of an infinite plate with single hole by using Airy’s stress function

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. Din Bandhu

  68. Design and Development of Portable UAV Ground Control and Communication Station Integrated with Antenna Tracking Mechanism

    Article • December 2021, Springer Science + Business Media

    Dr. Din Bandhu

  69. Recent trends in drilling of carbon fiber reinforced polymers (CFRPs): A state-of-the-art review

    Article • Journal of Manufacturing Processes, September 2021, Elsevier

    Dr. Din Bandhu

  70. Assessment of weld bead geometry in modified shortcircuiting gas metal arc welding process for low alloy steel

    Article • Materials and Manufacturing Processes, April 2021, Taylor & Francis

    Dr. Din Bandhu

  71. Experimental investigation and optimization of abrasive waterjet machining parameters for GFRP composites using metaphor-less algorithms

    Article • Materials and Manufacturing Processes, January 2021, Taylor & Francis

    Dr. Din Bandhu

  72. A Study on Mechanical Attributes of Epoxy-Carbon Fiber-Terminalia bellirica Embedded Hybrid Composites

    Article • January 2021, Springer Science + Business Media

    Dr. Din Bandhu

  73. An Overview of Proteus: The world’s First Man-Made Non-cuttable Material

    Article • January 2021, Springer Science + Business Media

    Dr. Din Bandhu

  74. Parametric Optimization and Evaluation of Machining Performance for Aluminium-Based Hybrid Composite Using Utility-Taguchi Approach

    Article • January 2021, Springer Science + Business Media

    Dr. Din Bandhu

  75. Parametric Optimization and Evaluation of RMDTM Welding Performance for ASTM A387 Grade 11 Steel Plates Using TOPSIS-Taguchi Approach

    Article • January 2021, Springer Science + Business Media

    Dr. Din Bandhu

  76. Recent trends in non-traditional machining of shape memory alloys (SMAs): A review

    Article • CIRP Journal of Manufacturing Science and Technology, January 2021, Elsevier

    Dr. Din Bandhu

  77. Study of machinability aspects of shape memory alloys: A critical review

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. Din Bandhu

  78. Advances in gas metal arc welding process: modifications in short-circuiting transfer mode

    Article • January 2021, Elsevier

    Dr. Din Bandhu

  79. Analysis of Dimensional Accuracy of ABS M30 Built Parts Using FDM Process

    Article • January 2021, Springer Science + Business Media

    Dr. Din Bandhu

  80. Reduction of Scrap and Rework Cost by Implementing 5S Methodology: A Case Study

    Article • January 2021, Springer Science + Business Media

    Dr. Din Bandhu

  81. Experimental investigation and optimization of RMDTM welding parameters for ASTM A387 grade 11 steel

    Article • Materials and Manufacturing Processes, December 2020, Taylor & Francis

    Dr. Din Bandhu

  82. Study of parametric influence and welding performance optimization during regulated metal deposition (RMD™) using grey integrated with fuzzy taguchi approach

    Article • Journal of Manufacturing Processes, June 2020, Elsevier

    Dr. Din Bandhu

  83. Experimental studies of Regulated Metal Deposition (RMD™) on ASTM A387 (11) steel: study of parametric influence and welding performance optimization

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, January 2020, Springer Science + Business Media

    Dr. Din Bandhu

  84. Experimental investigation on material removal rate during abrasive water jet machining of GFRP composites

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr. Din Bandhu

  85. Experimental investigation on peel strength during ultrasonic welding of polypropylene H110MA

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr. Din Bandhu

  86. Application of Utility Function Approach Aggregated with Imperialist Competitive Algorithm for Optimization of Turning Parameters of AISI D2 Steel

    Article • October 2019, Springer Science + Business Media

    Dr. Din Bandhu

  87. Characterization & evaluation of Al7075 MMCs reinforced with ceramic particulates and influence of age hardening on their tensile behavior

    Article • Journal of Mechanical Science and Technology, July 2018, Springer Science + Business Media

    Dr. Din Bandhu

  88. Characterization and Evaluation of Mechanical Behavior of Epoxy-CNT-Bamboo Matrix Hybrid Composites

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr. Din Bandhu

  89. A REVIEW ON USAGE OF NANO-PARTICLES IN NUCLEAR POWER PLANTS

    Article • International Journal of Research -GRANTHAALAYAH, February 2017, Granthaalayah Publications and Printers

    Dr. Din Bandhu

  90. Ranitidine Loaded Biopolymer Floats: Designing, Characterization, and Evaluation

    Article • Journal of Chemistry, January 2017, Hindawi Publishing Corporation

    Dr. Din Bandhu