All Stories

  1. Spatial coherence and diffraction effects in beam homogenizers for optical-based 3D printers
  2. Addressing Challenges in Porous Silicon Fabrication for Manufacturing Multi-Layered Optical Filters
  3. PN Junction Optimization for High-Speed Silicon Photonic Modulators
  4. Effects of Extreme Mirror Downscaling on Open Micro‐Fabry–Perot Spectral Responses and Resonant Mode Profiles
  5. Replica symmetry breaking dynamics in high-order optical mode multi-Stokes coherent random fiber laser
  6. Telecentric DLP optical engine for an optical-based 3D printer
  7. Dynamic Microfluidic Synthesis of Zinc Oxide Nanowires: Impact of Channel Architecture on Growth Homogeneity and Uniformity
  8. Artificial Intelligence-Supported Spatial Scanning for Enhanced Real-Time Spectral Analysis of Heterogeneous Media
  9. Effect of Inhomogeneous Temperature in Chip‐Scale Infrared Thermal Sources: A Revisited Blackbody Radiation Formula with Experimental Validation
  10. Multilevel asymmetric coupler MAC polarization beam splitter for Si photonics technology
  11. Modeling and characterization of deeply etched multilayer resonators under partial coherent excitation via multimode optical fibers
  12. Modeling of photonic MEMS Michelson interferometers comprising curved micromirrors under partially coherent light excitation
  13. Silicon Multipass Cells for Localized Multi-Parameter Gas Sensing by Absorption Spectroscopy
  14. A disposable optofluidic micro-transmission cell with tailorable length for Fourier-transform infrared spectroscopy of biological fluids
  15. Modelling and experimental characterization of double layer InP/AlGaInP quantum dot laser
  16. Single Infrared Spectrum Enables Simultaneous Identification of (Bio)Chemical Nature and Particle Size of Microorganisms and Synthetic Microplastic Beads
  17. Multilevel asymmetric coupler MAC field rotator for LP11 mode in few mode fiber
  18. On-Chip Photonic MEMS Coupled-Cavity Spectrometer
  19. Potential of a Miniature Spectral Analyzer for District-Scale Monitoring of Multiple Gaseous Air Pollutants
  20. Matrix analysis for back reflection and mode conversion in silicon waveguide bend structure
  21. Allan Variance Characterization of Compact Fourier Transform Infrared Spectrometers
  22. 2D coupling configurations in integrated optical structures
  23. Polarized light diffuse reflectance FT-NIR MEMS spectrometer enabling the detection of powder samples through a thin plastic layer
  24. Numerical modelling for micropillar-enhanced silicon ATR crystals for mid-infrared spectroscopy of biomarkers
  25. Detection of Sub-20 μm Microplastic Particles by Attenuated Total Reflection Fourier Transform Infrared Spectroscopy and Comparison with Raman Spectroscopy
  26. Substrate Signal Inhibition in Raman Analysis of Microplastic Particles
  27. Novel Wavefront-Splitting Interferometer for Ultra-Compact Broadband FT-IR Spectroscopy Extending to Visible Range
  28. 2D spot size converter using a multilevel asymmetric coupler MAC structure for Si photonics planar technology
  29. Modeling of surface roughness in deeply etched photonic MEMS mirrors and filters
  30. Semi-supervised deep learning framework for milk analysis using NIR spectrometers
  31. Numerical Study of Parabolic Pulse Generation in Backward-Pumped Erbium-Doped Fiber Amplifiers
  32. Critical analysis of in-plane free-space light beam coupling using photonic curved micromirrors
  33. Optical phase shifter design for single and multi-mode waveguide configurations
  34. High sensitivity refractive index sensing using zone plate metasurfaces with a conical phase profile
  35. Direct Absorption and Photoacoustic Spectroscopy for Gas Sensing and Analysis: A Critical Review
  36. Double coincide rings-patterned plasmonic photonic crystal with engineered spectral emissivity for integrated thermal emitters
  37. Three-dimensional v-trough solar concentrator embedding a diffuser enabling high concentration ratio and uniform cell illumination
  38. Analysis of metallic slotted micromirrors using modal decomposition and multiple reflections
  39. Physical Parameter Extraction and Modeling of Metallized Deeply-Etched Vertical Mirrors
  40. Modelling of ATR-FTIR MEMS Spectrometer Under Partially-Coherent Multimode-Fiber Illumination
  41. Ultra-Compact Fourier Transform Near-Infrared MEMS Spectral Sensor for Smart Industry and IoT
  42. Spatiotemporal dynamics of nanowire growth in a microfluidic reactor
  43. Subthreshold Spectral Bi-Modality of Double Layer InP/AlGaInP Quantum Dot Laser
  44. Complex Kernel-based spectrum reconstruction algorithm for cascaded Fabry–Perot interferometric spectrometer
  45. Characteristics of a refractometer based on Michelson interferometer integrated with a Fabry-Perot interferometer
  46. Optical Fiber Filters Linewidth Enhancement Based on Erbium-doped Photonic Crystal Fiber Cavities
  47. Modeling of Fabry-Perot Micro Cavities Under Partial Spatial Coherence Illumination Using Multimode Optical Fibers
  48. Differential Optical Spectrometer Based on Critical Angle Dispersion
  49. Single MEMS Chip Enabling Dual Spectral‐Range Infrared Micro‐Spectrometer with Optimal Detectors
  50. High collection uniformity three-dimensional V-trough concentrators
  51. MEMS-based polarized FTIR spectrometer for polymer quality control
  52. Wide-angle wide-spectral range IMI plasmonic MEMS mirror in the MIR for spectroscopic gas sensing applications
  53. Sensitivity Enhancement Factor for Gain-Assisted Cavity Enhanced Spectroscopy
  54. Micro-Electro-Mechanical System Fourier Transform Infrared (MEMS FT-IR) Spectrometer Under Modulated–Pulsed Light Source Excitation
  55. Design of a 2D fiber mode converter using a planar 2D multi-mode interference structure
  56. FTIR AND UV IN STEEL PIPELINE COATING APPLICATION
  57. Silicon Multi-Pass Gas Cell for Chip-Scale Gas Analysis by Absorption Spectroscopy
  58. Parameter extraction of silicon photonic devices using optical coherence tomography
  59. Enhanced resolution MEMS spectrometer based on FTIR technique combined with reflection-type etalon
  60. Mid-infrared radiation source for spectroscopic applications based on multiwalled carbon nanotubes on top of silicon
  61. Plastic sorting based on MEMS FTIR spectral chemometrics sensing
  62. Silicon based integrated hollow waveguide for gas sensing applications
  63. Simple and low-cost method for particulate matter size determination based on far-field interference pattern image processing
  64. Visible Laser on Silicon Optofluidic Microcavity
  65. High sensitivity refractive index sensing using an axicon lens structure
  66. Cavity enhanced spectroscopy using multi-longitudinal mode laser RF beating
  67. NIR optical properties of SWCNTs based on ab-initio calculations and the transfer matrix method
  68. Spectral background removal of MEMS FTIR spectrometer-based gas analyzer
  69. Attenuated total reflection (ATR) MEMS FTIR spectrometer
  70. Combined MEMS spectrometer based on Michelson interferometer and tunable filter for wideband selective operation
  71. Compressive sensing MEMS FTIR spectrometer
  72. Modeling and characterization of the reflectance of vertical metal-coated micromirrors in deeply-etched optical benches
  73. Multi-walled carbon nanotubes based near-infrared radiation source
  74. Absorptivity enhancement of black silicon using electroless Cu plating
  75. Beam finite spot size effect on angle-tolerant optical filters
  76. Suspended silicon waveguide for mid-infrared gas sensing
  77. Waveguides sensitivity analysis for mid-infrared gas sensing
  78. Comprehensive study on the parameters affecting the line-width and stability of SOA-based SLM random fiber laser
  79. Real-time optical monitoring of zinc-oxide nanowires in-situ growth within a microfluidic chamber
  80. Continuous Monitoring of Air Purification: A Study on Volatile Organic Compounds in a Gas Cell
  81. On-chip parallel Fourier transform spectrometer for broadband selective infrared spectral sensing
  82. Mid Infrared Optical Gas Sensor Using Plasmonic Mach-Zehnder Interferometer
  83. Kinetics Study and Online Monitoring of in-Situ Growth of Zinc-Oxide Nanowire Arrays Within Microfluidic Chambers
  84. Semi-Analytical Effective Layer Model for the Skin in the SWIR Spectral Range
  85. Silicon photonic coupled-ring resonator in nested configuration comprising different length scales
  86. Capturing the Instantaneous Spectral Response of a MEMS Swept Laser Source Using a Quasi-Static Tunable Filter
  87. Compact Adiabatic Taper for SOI Waveguide
  88. Micro-Machined Heater Designed for Miniaturized Thermal IR Sources
  89. Spectroscopic Gas Sensing Based on a MEMS-SOA Swept Fiber Laser Source
  90. Mid Infrared Integrated MZI Gas Sensor Using Suspended Silicon Waveguide
  91. Autoregressive superresolution microelectromechanical systems Fourier transform spectrometer
  92. All‐Silicon Double‐Cavity Fourier‐Transform Infrared Spectrometer On‐Chip
  93. Highly Doped Semiconductor Plasmonic Nanoantenna for Biomedical Sensing
  94. Corrections to “Toward On-Chip MEMS-Based Optical Autocorrelator” [Oct 18 5003-5009]
  95. On-Chip Parallel Architecture Mems FTIR Spectrometers Enabling High Spectral Resolution for Environmental Gas Analysis
  96. Combining MEMS FTIR Spectrometer and Widened-Spectrum Mode-Locked Fiber Laser for Gas-Sensing
  97. Gas Detection using a MEMS-Based Swept Laser Source
  98. Odd excitation of symmetric multimode interference structures
  99. On the Detection of Volatile Organic Compounds (VOCs) Using Machine Learning and FTIR Spectroscopy for Air Quality Monitoring
  100. Performance Improvement of White LED-Based VLC Systems Using Blue and Flattening Filters
  101. Planar asymmetric nano-resonators for highly angle tolerant trans-reflective color filters
  102. Active fiber-ring enhanced absorption gas spectroscopy using multi-longitudinal mode tunable laser in the NIR
  103. Silicon photonics dual-coupler nested coupled cavities
  104. Crosstalk analysis in asymmetric directional coupler for MDM application
  105. MEMS FTIR optical spectrometer enables detection of volatile organic compounds (VOCs) in part-per-billion (ppb) range for air quality monitoring
  106. MEMS swept laser source with enhanced performance
  107. Optimization of silicon on silica waveguides for mid-infrared applications at 4.28 um
  108. Ultra wide band MIR MEMS FTIR spectrometer
  109. Modal analysis of TE and TM excitations in a metallic slotted micromirror
  110. Modeling and characterization of a dual-wavelength SOA-based single longitudinal mode random fiber laser with tunable separation
  111. Incoherent Gain-Assisted Ring Enhanced Gas Absorption Spectroscopy
  112. NIR and MIR Absorption of Ultra-Black Silicon (UBS). Application to High Emissivity, All-Silicon, Light Source
  113. Strip Waveguide Enabling Low Loss for Silicon on Silica Technology in the MIR
  114. Enhancement of Modulation Bandwidth in Wide-Angle VLC Systems via Response-Flattening Filters
  115. Impact of blue filtering on effective modulation bandwidth and wide-angle operation in white LED-based VLC systems
  116. Toward On-Chip MEMS-Based Optical Autocorrelator
  117. Transformation algorithm and analysis of the Fourier transform spectrometer based on cascaded Fabry–Perot interferometers
  118. In-plane coupled Fabry–Perot micro-cavities based on Si-air Bragg mirrors: a theoretical and practical study
  119. Transmission-enabled fiber Fabry–Perot cavity based on a deeply etched slotted micromirror
  120. Optical modeling of black silicon using an effective medium/multi-layer approach
  121. Long travel range thermal actuator for deeply etched MEMS components
  122. Narrow line width dual wavelength EDFA based random fiber laser
  123. Near-infrared optical MEMS spectrometer-based quantification of fat concentration in milk
  124. Omnidirectional optical MEMS scanner based on two degrees-of-freedom translation of acylindrical micromirrors
  125. Optical MEMS-scale multipass white cell for onchip gas sensing
  126. Vernier effect-based multiplication of the Sagnac beating frequency in ring laser gyroscope sensors
  127. Narrow line width dual wavelength semiconductor optical amplifier based random fiber laser
  128. Mode converter using 2D MMI
  129. Modeling of the emissivity of super-wavelength black silicon in the geometrical optics regime
  130. MEMS FTIR spectrometer with enhanced resolution for low cost gas sensing in the NIR
  131. MEMS tunable-finesse slotted micromirror resonator
  132. MEMS-based Fourier transform spectrometer using pulsed infrared light source
  133. Optical MEMS notch filter based on the multi-mode interference in a butterfly metallic waveguide
  134. Ring-patterned plasmonic photonic crystal thermal light source for miniaturized near-infrared spectrometers
  135. Mid-infrared plasmonic gas sensor
  136. Dual coupler coupled cavities optical gyroscope with enhanced performance
  137. Experimental Access to the Instantaneous Spectrum of MEMS-Based Swept Source
  138. Analysis of dual coupler nested coupled cavities
  139. Numerical estimation of dispersion effect in deeply-etched fully integrated MEMS Mach-Zhender interferometer
  140. Planar broad-band and wide-angle hybrid plasmonic IMI filters with induced transmission for visible light applications
  141. Quasi-homogeneous partial coherent source modeling of multimode optical fiber output using the elementary source method
  142. Optical Gas Sensing Based on MEMS FTIR Spectrometers
  143. Single-longitudinal-mode broadband tunable random laser
  144. Overcoming the near-infra-red spectral range limit with Fabry-Perot silicon microcavity enabled by slotted micromirrors
  145. Ultra-compact MEMS FTIR spectrometer
  146. In-Plane Optical Beam Collimation Using a Three-Dimensional Curved MEMS Mirror
  147. Multimode spot-size converter for optical MEMS applications
  148. Distortion of Gaussian beams reflected off-axis on curved mirrors in the MEMS scale
  149. Theoretical and experimental analysis of the fabrication tolerance on deeply etched silicon/air Bragg micromirrors
  150. Multi-segment tapered optical mirror for MEMS LiDAR application
  151. Ring mirror fiber laser gyroscope
  152. Characterization and modelling of multimode optical fiber for MOEMS applications using the elementary source method
  153. Narrow line width semiconductor optical amplifier based random laser
  154. A method for determining the direction of rotation in ring laser gyroscope based on fiber ring cavity and semiconductor optical amplifier
  155. Dual wavelength SOA based fiber ring laser
  156. Tunable and non-reciprocal dual-wavelength SOA-fiber ring laser
  157. Gain-assisted broadband ring cavity enhanced spectroscopy
  158. Environmental mid-infrared gas sensing using MEMS FTIR spectrometer
  159. Deeply-etched MEMS slotted micromirrors with controlled transmittance
  160. Optical characterization of high speed microscanners based on static slit profiling method
  161. Angle-tolerant hybrid plasmonic filters for visible light communications
  162. Electrostatic Comb-Drive Actuator with High In-Plane Translational Velocity
  163. In-Line Optical MEMS Phase Modulator and Application in Ring Laser Frequency Modulation
  164. A compact polarization beam splitter based on an array of rectangular waveguides
  165. Optical diffuse reflectance of Black Silicon and its isotropicity
  166. Compact Si photonic multimode interference-based optical circuit for mode division multiplexing applications
  167. Fourier transform spectrometer based on Fabry–Perot interferometer
  168. Wideband Optical MEMS Interferometer Enabled by Multimode Interference Waveguides
  169. Optical filter finesses enhancement based on nested coupled cavities and active medium
  170. On-Chip Micro–Electro–Mechanical System Fourier Transform Infrared (MEMS FT-IR) Spectrometer-Based Gas Sensing
  171. Millimeter-wave small-cells traffic off-loading with large-scale antenna arrays for UDN
  172. In-plane monolithic microscanner with two synchronized, self-aligned flat mirrors and compliant springs
  173. Mid infrared MEMS FTIR spectrometer
  174. Deeply-etched micromirror with vertical slit and metallic coating enabling transmission-type optical MEMS filters
  175. Novel Fourier transform infrared spectrometer architecture based on cascaded Fabry-Perot interferometers
  176. Black silicon-based infrared radiation source
  177. Characterization technique for long optical fiber cavities based on beating spectrum of multi-longitudinal mode fiber laser and beating spectrum in the RF domain
  178. Beating signal power level improvement in ring lasers based on coupled ring resonators
  179. Ring laser gyroscope based on standard single-mode fiber and semiconductor optical amplifier
  180. The MEMS FTIR spectrometer: An optical IC to analyze everywhere
  181. On the environmental gas sensing using MEMS FTIR spectrometer in the near-infrared region
  182. Box-like filter response using multimode single-ring microresonators
  183. Parameter Extraction of Wide Band SOA Targeting Rapidly Swept Source Sensing Applications
  184. Hierarchical Precoding in a Realistic Ultradense Heterogeneous Environment Exceeding the Degrees of Freedom
  185. Accessing Rapidly Scanning Swept Laser Source Instantaneous Spectral Width Using a Multimode Rate Equation Model
  186. Volume refractometry of liquids using stable optofluidic Fabry–Pérot resonator with curved surfaces
  187. Study of dual-source Fourier-domain optical coherence tomography
  188. Design of an InGaAsP/InP compact integrated optical depolarizer
  189. In-plane deeply-etched optical MEMS notch filter with high-speed tunability
  190. Spatial interference management with hierarchical precoding in ultra-dense heterogeneous networks
  191. Diffraction grating polarization beam splitter using nano optical slits
  192. Proposed static timing analysis framework for extracted 3D integrated circuits (3D-STA)
  193. Curved Silicon Micromirror for Linear Displacement-to-Angle Conversion With Uniform Spot Size
  194. Wideband Subwavelength Deeply Etched Multilayer Silicon Mirrors for Tunable Optical Filters and SS-OCT Applications
  195. Multimode waveguide spot size width converter for silicon photonics applications
  196. Bidirectional single-longitudinal mode SOA-fiber ring laser based on optical filter assisted gain starvation
  197. Thermal stability of multi-longitudinal mode laser beating frequencies in hybrid semiconductor-fiber ring lasers
  198. D3. Optical coupling of cylindrical micromirrors in micro-optical benches
  199. D1. High frequency in-plane MEMS actuator
  200. D5. Design of InGaAsP/InP compact integrated lyot depolarizer
  201. Energy efficient design of DVB-T2 constellation demapper
  202. Volume refractometry of liquids using stable optofluidic Fabry-Pérot resonator with curved surfaces
  203. Fiber-coupled Fabry-Pérot notch filter combining in-plane axis, high speed MEMS tunability and large etching depth
  204. MEMS-based frequency modulation of fiber ring laser
  205. Monolithic silicon-micromachined free-space optical interferometers onchip
  206. Dispersion compensation in Fourier domain optical coherence tomography
  207. Robust energy harvesting aware clustering with fuzzy petri net reasoning algorithm
  208. Network coding gain in device-to-device underlaying primary communications
  209. MEMS corner-cube transmission-type optical phase modulator in DRIE technology
  210. High-throughput deeply-etched scanning Michelson interferometer on-chip
  211. Deeply-etched 1 micron-thick silicon layers enabling 170-NM bandwidth highly-reflective Bragg mirrors
  212. In-plane comb-drive actuator with high frequency-displacement product for micro-optical bench applications
  213. Performance evaluation of a metal–insulator–metal surface plasmon resonance optical gas sensor under the effect of Gaussian beams
  214. Intrinsic improvement of diffraction-limited resolution in optical MEMS fourier-transform spectrometers
  215. Resonance Wavelength of Integrated Optical Ring Resonator With Small Radius of Curvature
  216. DNG versus SNG-based IR SPR optical CO2 sensor performance evaluation under Gaussian beam excitation
  217. On the resonance frequency of an integrated optical ring resonator with low radius of curvature
  218. MMI-based MOEMS FT spectrometer for visible and IR spectral ranges
  219. Three-dimensional collimation of in-plane-propagating light using silicon micromachined mirror
  220. MEMS optical tunable filter based on free-standing subwavelength silicon layers
  221. Dual-fiber OCT measurements
  222. Multi-step etching of three-dimensional sub-millimeter curved silicon microstructures with in-plane principal axis
  223. Deeply-Etched Optical MEMS Tunable Filter for Swept Laser Source Applications
  224. Inclination-independent transformation of light beams using high-throughput uniquely-curved micromirrors
  225. In-plane external fiber Fabry–Perot cavity comprising silicon micromachined concave mirror
  226. Design optimization of linearly DC controlled staggered vertical comb drive actuators
  227. Silicon micromirrors with three-dimensional curvature enabling lensless efficient coupling of free-space light
  228. Integrated wide-angle scanner based on translating a curved mirror of acylindrical shape
  229. In-plane diffraction loss free optical cavity using coated optical fiber and silicon micromachined spherical mirror
  230. Wide steering angle microscanner based on curved surface
  231. Propagation of Bessel beams generated using finite-width Durnin ring
  232. Signal-to-noise ratio calculation in a moving-optical-wedge spectrometer
  233. Prioritized Adaptive Modulation for MIMO-OFDM Using Pre-Ordered SIC
  234. Parameter extraction of MEMS comb-drive near-resonance equivalent circuit: physically-based technique for a unique solution
  235. Applying a modal technique on a planar lens based on nanoscale slit arrays
  236. Modeling of subwavelength problems using modal techniques
  237. Effect of ring width on ring generated Bessel beam
  238. Linewidth of swept laser source
  239. Fully Integrated Mach-Zhender MEMS Interferometer With Two Complementary Outputs
  240. Spot size effects in miniaturized moving-optical-wedge interferometer
  241. Simple method for measuring dispersion and spectral absorption of Si wafers for use in MEMS applications
  242. Fabrication of optical filters using multilayered porous silicon
  243. Characterization of MEMS FTIR spectrometer
  244. Refractive index change in porous silicon after detaching from the substrate
  245. The effect of Gaussian beam spot size on the performance of an SPR IR optical CO
  246. Modeling the field diffracted from photo mask at oblique incidence
  247. Diffraction effects in optical microelectromechanical system Michelson interferometers
  248. Design of CWDM multiplexers based on series coupled ring resonators: analysis, potential and prospects on MEMS fabrication technologies
  249. Miniaturized tunable integrated Mach-Zehnder MEMS interferometer for spectrometer applications
  250. Stable optical filter using porous silicon technology
  251. Mach-Zehnder MEMS interferometer with two Si/Air beam splitters
  252. SRAM dynamic stability estimation using MPFP and its applications
  253. Steady and oscillating multiple dissipative solitons in normal-dispersion mode-locked Yb-doped fiber laser
  254. Dispersion compensation in moving-optical-wedge Fourier transform spectrometer
  255. A Timing-Dependent Power Estimation Framework Considering Coupling
  256. Modeling mask scattered field at oblique incidence
  257. Optimizing stable mode-locked operation of Yb-doped fiber laser
  258. Properties and stability limits of an optimized mode-locked Yb-doped femtosecond fiber laser
  259. Optical characterization technique for MEMS comb-drive resonators
  260. MEMS tunable Michelson interferometer with robust beam splitting architecture
  261. RF optoelectronic oscillator using a directly modulated semiconductor laser and a fiber optical ring filter
  262. Accurate Estimation of SRAM Dynamic Stability
  263. Effect of the fabrication and design parameters on the performance of multimode interference devices made by ion exchange: a detailed study
  264. Straight multimode interference phased array structure using periodic segmented waveguide phase array
  265. Design of an arrayed waveguide grating optical demultiplexer for CWDM applications
  266. Analytical Model for the Propagation Delay of Through Silicon Vias
  267. A global interconnect link design for many-core microprocessors
  268. SRAM dynamic stability estimation using MPFP
  269. Design of Compact Integrated InGaAsP/InP Polarization Controller Over the C-Band
  270. A Semianalytical Technique for Leaky-Mode Loss Calculation in Hollow Dielectric Waveguides With Arbitrary Cross Sections
  271. Comparison of the N times mode-lines technique to the inverse technique in refractive index profile reconstruction
  272. The Design and Optimization of an Ion-Exchanged Polarization Converter Using a Genetic Algorithm
  273. FTTH Triplexer Design Using Asymmetric Y-Junction With Etched Branch
  274. Effect of Power Supply Noise on SRAM Dynamic Stability
  275. Multiple Quantum Well laser diode parameter extraction using the IM response
  276. Assessment of the NM-Lines Sensitivity for Measurement Errors
  277. Design of Compact Integrated InGaAsP/ InP Polarization-Insensitive Tunable 2�2 Power Coupler over the C-band
  278. Design of silicon hollow waveguide in-line polarizer using a photonic crystal concept
  279. Monte Carlo Simulation of Photonic Band Gap Structures
  280. Highly Efficient Micromachined Bragg Mirrors Using Advanced DRIE Process
  281. Free-Space Tunable and Drop Optical Filters Using Vertical Bragg Mirrors on Silicon
  282. A Timing Dependent Power Estimation Framework Considering Coupling
  283. Ray optics model for triangular hollow silicon waveguides
  284. Tuning of an RF Optoelectronic Oscillator
  285. SPICE Modeling of Free-Space Optical Systems
  286. Single-Mode Refractive Index Reconstruction Using an NM-Line Technique
  287. Optimized 3D design of an MMI splitter with ion exchange technology
  288. A MEMS Tunable Optical Ring Resonator Filter
  289. Design of a compact three-dimensional multimode interference phased array structures (3-D MMI PHASAR) for DWDM applications
  290. Yield analysis of optical MEMS assembly Process using a Monte Carlo Simulation technique
  291. Multiple-Imaging in 2-D MMI Silicon Hollow Waveguides
  292. Cascaded multimode interference phased array structures for dense wavelength division multiplexing applications
  293. A MEMS-Based VOA With Very Low PDL
  294. Two-dimensional multimode interference in integrated optical structures
  295. Characterization of digitally compensated, large displacement comb drive
  296. The effect of shutter thickness on opto-mechanical variable optical attenuators
  297. Digital compensation technique for the improvement of the comb drive actuator transient response
  298. The second Born approximation in electron-atom collisions in the presence of a laser field
  299. Modeling of MOEMS components using HDL-A
  300. Fabrication and test of an integrated optical magic T on a glass substrate
  301. Integrating optical wave simulation into microsystems CAD tools
  302. Design of an integrated optical magic T for astronomy applications
  303. CAD models for optical integrated circuits using the radiation spectrum method (RSM) with evanescent modes
  304. Design of an integrated optical magic T using the multimode interference phenomena
  305. On the radiation mode effects in integrated optical directional couplers
  306. Optical modeling of waveguide photonic nanostructures using the radiation spectrum method (RSM) with evanescent modes
  307. Light polarization effects in laser-assisted elastic electron-helium collisions: a Sturmian approach
  308. Design of strip-loaded weak-guiding multimode interference structure for an optical router
  309. Rigorous modal analysis of multi-mode interference (MMI) structures by radiation spectrum method with multiple reflection
  310. Weighted-index beam-propagation method for analysis of three-dimensional optical structures
  311. Towards a full vectorial and modal technique for the analysis of integrated optics structures: the Radiation Spectrum Method (RSM)
  312. On the improvement of the performance of the optically controlled microwave switch
  313. Quasi-static analysis of an optically illuminated directional coupler
  314. An optically controlled microwave matching technique
  315. Rigorous spectral analysis of leaky structures: application to the prism coupling problem
  316. All-optical networks as microwave and millimeter-wave circuits
  317. Effects of radiation-mode coherent coupling in integrated optics discontinuities
  318. An electrooptic switching structure on III-V semiconductors using the coherent coupling of radiation modes
  319. On the use of optical networks for performing microwave functions
  320. Novel structure for electro-optic intensity modulators: the radiation mode modulator
  321. Analyse théorique et caractérisation expérimentale ďune jonction Y intégrée utilisée comme capteur de déplacement
  322. Study of linear tapered waveguides made by ion exchange in glass
  323. Coherent coupling of radiation modes in Mach-Zehnder electrooptic modulators
  324. An exact simplified method for the normalization of radiation modes in planar multilayer structures
  325. Asymmetric excitation of symmetric single-mode Y-junctions: the radiation mode effects
  326. Nonharmonic large amplitude modulation of a semiconductor laser in a self-homodyne interferometric optical system
  327. Simple homodyne technique for the characterisation of wideband optical detectors
  328. THREE-DIMENSIONAL INTEGRATED OPTICS: MMI COUPLERS FOR MULTILEVEL PHASARS
  329. Optical Gas Sensing with MEMS FTIR Spectrometers
  330. Recent trends in optical MEMS for telecommunication applications
  331. Design of silicon hollow waveguide polarizer using multilayer structures
  332. Evaluation of Capacitor Ratios in Automated Accurate Common-Centroid Capacitor Arrays
  333. Analysis of 2D multimode interference structures
  334. Assembly and characterization of optical MEMS (micro-electro-mechanical systems)
  335. Modelling and characterisation of a VOA with different shutter thickness
  336. Advances in optical filters
  337. Teaching laser dynamics and optical communication systems using a standard system simulator
  338. Compensated layout for automated accurate common-centroid capacitor arrays
  339. Hollow waveguides for NxN optical cross connect switch
  340. On the monte carlo simulation of optical MEMS components
  341. Optimization of optical wide band 3-dB MMI splitter with graded-index side diffusions
  342. Towards multilevel integrated optics: the two-dimensional multimode interference PHASAR
  343. A MEMS-based Coupled-cavity Tunable Optical Filter
  344. Optical Characterization of Single Crystal Silicon Microlens Fabricated by the 'MEMSNAS' Process
  345. Fabrication and characterization of surface and buried optical waveguides made by ion exchange on glass
  346. The weighted index beam propagation method (WIBPM)