All Stories

  1. A Fuzzy Multi-Objective Model for order Allocation Considering Defect, Late Delivery and Carbon Emission Under Cap-and-Trade Carbon Policy

    Article • Process Integration and Optimization for Sustainability, January 2026, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  2. An integrated analytics model for supplier selection and order allocation with machine learning and multi-criteria optimization

    Article • Decision Analytics Journal, September 2025, Elsevier

    Dr. Cucuk Nur Rosyidi

  3. A Framework for Sustainable Supplier Selection Integrating Grey Forecasting and F-MCDM Methods: A Case Study

    Article • Jurnal Optimasi Sistem Industri, June 2025, Perpustakaan Universitas Andalas

    Dr. Cucuk Nur Rosyidi

  4. A multi-echelon closed-loop supply chain model with multi-recovery systems and carbon regulation

    Article • Supply Chain Analytics, June 2025, Elsevier

    Dr. Cucuk Nur Rosyidi

  5. A Fuzzy Programming Model for Aggregate Production Planning Considering Defect Rate Reduction and Learning Curve

    Article • January 2025, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  6. A Multi-echelon Fish Supply Chain Model with Waste Recycling

    Article • January 2025, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  7. An Optimization Model for Cross-Docking Operation Scheduling and Distribution

    Article • January 2025, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  8. Experimental Investigation of the Effect and Optimization of FDM Process Parameters on Build Time and Compressive Strength of Printed Bone Screws Using Taguchi Method

    Article • January 2025, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  9. Impact Framework of Sugar Agroindustry Restructuring on Supply Chains

    Article • January 2025, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  10. Multi-objective Optimization Modeling in 3D Printing Process of PLA+ Using Response Surface Methodology and NSGA II

    Article • January 2025, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  11. Sustainable Value Stream Mapping Application in the Furnace Process at a Large Nickle Company

    Article • January 2025, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  12. The Improvement of Procurement Process for Promotional Goods Using Value Stream Mapping and Multi-Criteria Decision Making

    Article • January 2025, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  13. An integrated optimization model for procurement and production lot sizing and scheduling problems

    Article • Production Engineering Archives, May 2024, Stowarzyszenie Menedzerow Jakosci i Produkcji

    Dr. Cucuk Nur Rosyidi

  14. An optimization model of supplier selection and order allocation with transportation mode alternatives under carbon cap and trade policy

    Article • Cogent Engineering, March 2024, Taylor & Francis

    Dr. Cucuk Nur Rosyidi

  15. Pricing and green inventory decisions for a supply chain system with green investment and carbon tax regulation

    Article • Journal of Cleaner Production, November 2023, Elsevier

    Dr. Cucuk Nur Rosyidi, Dr Umakanta Mishra

  16. Classification of Acceleration Signal in Machining Process for Surface Roughness Identification using Tuned Support Vector Mechanics

    Article • October 2023, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  17. Application of Quality Function Deployment (QFD) in Die Redesign to Lowering Rework of Stamping Parts

    Article • International Journal of Industrial Engineering and Management, September 2023, Faculty of Technical Sciences

    Dr. Cucuk Nur Rosyidi

  18. Integrating Bass model in a closed loop supply chain system with low and high product return scenario under carbon cap and trade policy

    Article • Cogent Engineering, May 2023, Taylor & Francis

    Dr. Cucuk Nur Rosyidi

  19. A Mixed Integer Linear Programming Model of Order Allocation Involving Mass Customization Logistic Service (MCLS)

    Article • CAUCHY Jurnal Matematika Murni dan Aplikasi, October 2022, Maulana Malik Ibrahim State Islamic University

    Dr. Cucuk Nur Rosyidi

  20. Multi objective optimization model of CNC turning for minimizing processing time and carbon emission with real machining application

    Article • Journal of Industrial Engineering and Management, March 2021, Omnia Publisher SL

    Dr. Cucuk Nur Rosyidi

  21. Inventory and sales decisions in a vendor–buyer system with imperfect items and learning in inspection

    Article • Journal of Control and Decision, March 2021, Taylor & Francis

    Dr. Cucuk Nur Rosyidi

  22. Multi-objective cutting parameter optimization model of multi-pass turning in CNC machines for sustainable manufacturing

    Article • Heliyon, February 2021, Elsevier

    Dr. Cucuk Nur Rosyidi

  23. A closed-loop supply chain model with rework, waste disposal, and carbon emissions

    Article • Operations Research Perspectives, June 2020, Elsevier

    Dr. Cucuk Nur Rosyidi

  24. Optimization model for determining economic production quantity and process mean by considering internal and external quality loss

    Article • January 2020, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  25. Improvement of work processes and methods to achieve production targets using VA/NVA analysis, ECRS and line balancing

    Article • January 2020, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  26. An integrated inventory model for deteriorated and imperfect items considering carbon emissions and inflationary environment

    Article • January 2020, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  27. A consignment policy for a supplier-retailer inventory system

    Article • January 2020, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  28. An optimization model of make or buy decision and quality improvement of components using rebate

    Article • Cogent Engineering, January 2020, Taylor & Francis

    Dr. Cucuk Nur Rosyidi

  29. Inventory model optimisation for a closed-loop retailer-manufacturer-supplier system with imperfect production, reworks and quality dependent return rate

    Article • International Journal of Services and Operations Management, January 2020, Inderscience Publishers

    Dr. Cucuk Nur Rosyidi

  30. Inventory‐based optimization of a two‐echelon fossil‐fuelled energy storage system

    Article • International Transactions on Electrical Energy Systems, December 2019, Wiley

    Dr. Cucuk Nur Rosyidi

  31. Supplier selection of recycled plastic materials using best worst and TOPSIS method

    Article • Journal of Physics Conference Series, November 2019, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  32. A Sequential Optimization Model of Cut-off Grade and Project/Location Selection in Open Pit Mining

    Article • Industrial Engineering & Management Systems, September 2019, Korean Institute of Industrial Engineers

    Dr. Cucuk Nur Rosyidi

  33. Scheduling of undergraduate thesis examination: a case study in Industrial Engineering Department of Universitas Sebelas Maret

    Article • Journal of Industrial Engineering International, September 2019, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  34. Machines Maintenance Interval on Filling Lithos Lubricant Production Line: A Case Study

    Article • IOP Conference Series Materials Science and Engineering, August 2019, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  35. A Distributor-Retailer Inventory Model for Pharmaceutical Supply Chain With Expiry Cost

    Article • IOP Conference Series Materials Science and Engineering, June 2019, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  36. An eletricity inventory model for power plant and transmission stasion system with in-house demand and carbon emission cost

    Article • IOP Conference Series Materials Science and Engineering, June 2019, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  37. On optimizing the number of repetition in an operation skill training program based on cost of quality and learning curve

    Article • Cogent Engineering, March 2019, Taylor & Francis

    Cucuk Nur Rosyidi, Dr. Cucuk Nur Rosyidi

  38. Product quality improvement model considering quality investment in rework policies and supply chain profit sharing

    Article • Journal of Industrial Engineering International, March 2019, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  39. Design of Manufacture Professional Training and Assessment Information System in The Implementation of PBET (Production Based Education and Training) Learning Activity Model

    Article • March 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  40. Minimizing gap of utility between consumer and producer in a duopoly market considering outsourcing decision, price, and product tolerance

    Article • Production & Manufacturing Research, January 2019, Taylor & Francis

    Dr. Cucuk Nur Rosyidi, Eko Pujiyanto

  41. Service quality measurement of higher vocational education based on SERVQUAL and KANO: A case study in Politeknik ATMI Surakarta

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  42. The optimal-sizing of energy storage for a fossil fuel power plant

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  43. Multi responses optimization of plastic injection molding for biodegradable polymers using Taguchi method and TOPSIS

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  44. Manufacturing planning in an engineer-to-order company using CPM and PERT

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  45. A linear programming model in guitar production to maximize profit: A case study of guitar manufacturer in Indonesia

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  46. The implementation of lean six sigma in a book manufacturing company: A case study

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  47. Supplier selection and order allocation using TOPSIS and linear programming method at Pt. Sekarlima Surakarta

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  48. An optimization model of undergraduate thesis examination scheduling in department of industrial engineering, Sebelas Maret University

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  49. An optimization model for liquid steel production allocation at PT. XYZ considering maintenance schedule

    Article • January 2019, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  50. Two-stage optimization model for process/supplier selection, component allocation, and quality improvement

    Article • Cogent Engineering, December 2018, Taylor & Francis

    Dr. Cucuk Nur Rosyidi

  51. Two stages optimization model on make or buy analysis and quality improvement considering learning and forgetting curve

    Article • Journal of Industrial Engineering and Management, November 2018, Omnia Publisher SL

    Dr. Cucuk Nur Rosyidi

  52. An integrated optimisation model of refinery short-term planning: a case study

    Article • Energy Systems, November 2018, Springer Science + Business Media

    Dr. Cucuk Nur Rosyidi

  53. A vendor–buyer inventory model with imperfect production considering investment to reduce lead time variability

    Article • Cogent Engineering, October 2018, Taylor & Francis

    Dr. Cucuk Nur Rosyidi

  54. A Goal Programming Optimization Model for The Allocation of Liquid Steel Production

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  55. Reliability Centred Maintenance (RCM) Analysis of Laser Machine in Filling Lithos at PT X

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  56. Profit Analysis Model of Smart Item Implementation in Integrated Supply Chain Process

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  57. Design of conveyor utilization monitoring system: a case study of powder coating line in sheet metal fabrication

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  58. The development of daily monitoring tool in a service part manufacturing company

    Article • January 2018, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  59. Multi objective optimization model for minimizing production cost and environmental impact in CNC turning process

    Article • January 2018, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  60. Design of an automatic production monitoring system on job shop manufacturing

    Article • January 2018, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  61. Assessment of the readiness of SME to entering the modern market by using the good manufacturing practice and halal assurance system (Case study on Sari Murni SME)

    Article • January 2018, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  62. An optimization model for quality improvement investment decisions considering learning and forgetting curve

    Article • December 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  63. An integrated customer-manufacturer optimization model to determine the optimal product price and quality level using theory of utility

    Article • December 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  64. Integrated vendor-buyer inventory model considering imperfect quality and inspection errors with controllable lead time

    Article • December 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  65. A cut-off grade optimization model in the open pit mining considering reclamation and valuable waste materials

    Article • December 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  66. Inventory model optimization for supplier-manufacturer-retailer system with rework and waste disposal

    Article • IOP Conference Series Materials Science and Engineering, November 2017, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  67. Inventory Decisions in A Two-Echelon System with Remanufacturing, Carbon Emission, and Energy Effects

    Article • Cogent Engineering, September 2017, Taylor & Francis

    Dr. Cucuk Nur Rosyidi

  68. A concurrent optimization model for supplier selection with fuzzy quality loss

    Article • Journal of Industrial Engineering and Management, April 2017, Omnia Publisher SL

    Dr. Cucuk Nur Rosyidi

  69. Considering Children’s Methods of Grasping and Carrying Elementary School Chairs for Easy Carrying, Lifting, and Turning

    Article • SAGE Open, January 2017, SAGE Publications

    Associate Professor lulu purwaningrum, Dr. Cucuk Nur Rosyidi

  70. Open pit mining profit maximization considering selling stage and waste rehabilitation cost

    Article • January 2017, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  71. Make or buy decision model with multi-stage manufacturing process and supplier imperfect quality

    Article • January 2017, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  72. A closed-loop supply chain inventory model for manufacturer - Collector system with inspection, waste disposal and price-quality dependent return rate

    Article • January 2017, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  73. Factor Analysis of Kansei Words for Female Batik Clothes Using Three Stages Research: Looking, Touching, and Wearing

    Article • Advanced Science Letters, January 2017, American Scientific Publishers

    Dr. Cucuk Nur Rosyidi

  74. A collaborative inventory model for vendor-buyer system with inspection errors, unequal sized shipment, and repairable item

    Article • January 2017, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  75. The evaluation of criteria and subcriteria of research proposals using ANP method

    Article • January 2017, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  76. A supply chain inventory model for vendor-buyer system with defective items and imperfect inspection process

    Article • International Journal of Mathematics in Operational Research, January 2017, Inderscience Publishers

    Dr. Cucuk Nur Rosyidi

  77. Multi-objective optimization model of CNC machining to minimize processing time and environmental impact

    Article • January 2017, American Institute of Physics

    Dr. Cucuk Nur Rosyidi

  78. An investment allocation model for quality improvement to reduce component variances at manufacturer and supplier side to maximize the return on investment

    Article • December 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  79. Quality improvement by variance reduction of component using learning investment allocation model

    Article • December 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  80. Make or buy analysis model in a multi-stage manufacturing processes

    Article • December 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  81. A concurrent optimization model for suppliers selection, tolerance and component allocation with fuzzy quality loss

    Article • Cogent Engineering, August 2016, Taylor & Francis

    Dr. Cucuk Nur Rosyidi

  82. Mismatch Analysis of Elementary School Furniture in Several Regions of Central Java, Indonesia, and Redesign Recommendations

    Article • SAGE Open, August 2016, SAGE Publications

    Dr. Cucuk Nur Rosyidi

  83. An Integrated Optimization Model for Product Design and Production Allocation in a Make to Order Manufacturing System

    Article • International Journal of Technology, July 2016, International Journal of Technology

    Dr. Cucuk Nur Rosyidi

  84. Make or buy analysis model based on tolerance allocation to minimize manufacturing cost and fuzzy quality loss

    Article • IOP Conference Series Materials Science and Engineering, February 2016, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  85. A variation reduction allocation model for quality improvement to minimize investment and quality costs by considering suppliers’ learning curve

    Article • IOP Conference Series Materials Science and Engineering, February 2016, Institute of Physics Publishing

    Dr. Cucuk Nur Rosyidi

  86. A closed-loop supply chain model for supplier-manufacturer-retailer system with rework and waste disposal

    Article • January 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  87. The evaluation of criteria and subcriteria of research project selection using fuzzy analytical hierarchy process method

    Article • January 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  88. A collaborative supply chain inventory model with defective items, adjusted production rate and variable lead time

    Article • International Journal of Procurement Management, January 2016, Inderscience Publishers

    Dr. Cucuk Nur Rosyidi

  89. Mismatch Analysis of Elementary School Desk and Chair Using Monte Carlo Simulation

    Article • Applied Mechanics and Materials, November 2015, Trans Tech Publications

    Dr. Cucuk Nur Rosyidi

  90. Make or buy decision model with multi-stage manufacturing process to minimize manufacturing cost and quality loss

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Cucuk Nur Rosyidi

  91. Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

    Article • PLOS One, June 2015, PLOS

    Dr. Cucuk Nur Rosyidi

  92. Optimization and Improvement of Gas Spring Design in An Energy Storing Prosthetic Knee

    Article • International Journal of Technology, April 2015, International Journal of Technology

    Dr. Cucuk Nur Rosyidi

  93. Make or Buy Analysis Model Based on Tolerance Design to Minimize Manufacturing Cost and Quality Loss

    Article • Makara Journal of Technology, October 2014, Universitas Indonesia, Directorate of Research and Public Service

    Dr. Cucuk Nur Rosyidi

  94. Make or Buy Analysis Model Based on Tolerance Design to Minimize Manufacturing Cost and Quality Loss

    Article • Makara Journal of Technology, October 2014, Universitas Indonesia, Directorate of Research and Public Service

    Dr. Cucuk Nur Rosyidi

  95. Monte Carlo Simulation of Gas Spring in an Energy Storing Prosthetic Knee

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr. Cucuk Nur Rosyidi

  96. Mismatch Analysis of Elementary School Desk and Chair Key Characteristics in Indonesia

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr. Cucuk Nur Rosyidi

  97. Optimization Models for Deriving Optimum Target of Key Characteristics

    Article • Journal of Advanced Manufacturing Systems, June 2014, World Scientific Pub Co Pte Lt

    Dr. Cucuk Nur Rosyidi

  98. Cooperative inventory model for vendor-buyer system with unequal-sized shipment, defective items and carbon emission cost

    Article • International Journal of Logistics Systems and Management, January 2014, Inderscience Publishers

    Dr. Cucuk Nur Rosyidi

  99. A Multi-Objective Optimization Model for Plastic Cup Design Using Mechanical and Environmental Performances

    Article • Applied Mechanics and Materials, August 2013, Trans Tech Publications

    Dr. Cucuk Nur Rosyidi

  100. Redesigning Manual Wheelchair for Disabled Children Using Anthropometry Data and Biomechanical Analysis

    Article • Applied Mechanics and Materials, July 2013, Trans Tech Publications

    Dr. Cucuk Nur Rosyidi

  101. Simultaneous component and tolerance allocation through suppliers' selection considering technological capability and production capacity to minimise purchasing cost and quality loss

    Article • International Journal of Logistics Economics and Globalisation, January 2013, Inderscience Publishers

    Dr. Cucuk Nur Rosyidi

  102. Model Penentuan Nilai Target Functional Requirement Berbasis Utilitas

    Article • Jurnal Teknik Industri Jurnal Keilmuan dan Aplikasi Teknik Industri, June 2012, Petra Christian University

    Dr. Cucuk Nur Rosyidi

  103. PRIORITIZING KEY CHARACTERISTICS

    Article • Journal of Advanced Manufacturing Systems, June 2009, World Scientific Pub Co Pte Lt

    Dr. Cucuk Nur Rosyidi