All Stories

  1. Wickless vapor chambers open new opportunities for cooling of electronics
  2. Sprayable Superoleophobic Coatings for Pumpless Handling of Low‐Surface‐Tension Liquids
  3. Laser‐Tuned Surface Wettability Modification and Incorporation of Aluminum Nitride (AlN) Ceramics in Thermal Management Devices
  4. Droplet impact on a wettability‐patterned woven mesh
  5. Review of jet impingement cooling of electronic devices: Emerging role of surface engineering
  6. Droplet orthogonal impact on nonuniform wettability surfaces
  7. Air-cooled hybrid vapor chamber for thermal management of power electronics
  8. Real-time TEM observations of ice formation in graphene liquid cell
  9. Patterning Wettability for Open-Surface Fluidic Manipulation: Fundamentals and Applications
  10. Low-profile heat pipe consisting of wick-lined and non-adiabatic wickless wettability-patterned surfaces
  11. Wick-free paradigm for high-performance vapor-chamber heat spreaders
  12. Nanopumps without Pressure Gradients: Ultrafast Transport of Water in Patterned Nanotubes
  13. Machine Learning Prediction of TiO2-Coating Wettability Tuned via UV Exposure
  14. Effect of H2O2 Antiseptic on Dispersal of Cavitation-Induced Microdroplets
  15. Experimental investigation of low-profile heat pipe with wickless wettability-patterned condenser
  16. Quantifying Steam Dropwise Condensation Heat Transfer via Experiment, Computer Vision and Machine Learning Algorithms
  17. Computer simulation of the SARS-CoV-2 contamination risk in a large dental clinic
  18. Jet Impact on Superhydrophobic Metal Mesh
  19. Revisiting the supplementary relationship of dynamic contact angles measured by sessile-droplet and captive-bubble methods: Role of surface roughness
  20. Lateral Spreading of Gas Bubbles on Submerged Wettability-Confined Tracks
  21. Experimental investigation of a vapor chamber featuring wettability-patterned surfaces
  22. Numerical simulation of droplet impact on wettability-patterned surfaces
  23. Vapor Chamber with Wickless Condenser - Thermal Diode
  24. Explosive behavior during binary-droplet impact on superheated substrates
  25. Assessment of Pressure and Density of Confined Water in Graphene Liquid Cells
  26. Wettability-Engineered Meshes for Gas Microvolume Precision Handling in Liquids
  27. <p>Correlative ex situ and Liquid-Cell TEM Observation of Bacterial Cell Membrane Damage Induced by Rough Surface Topology</p>
  28. Post-Impact Behavior of a Droplet Impacting on a Permeable Metal Mesh with a Sharp Wettability Step
  29. Importance of Body Stance in Fog Droplet Collection by the Namib Desert Beetle
  30. Fluorinated Nanocomposite Coatings for Confinement and Pumpless Transport of Low‐Surface‐Tension Liquids
  31. Ultrafast Propulsion of Water Nanodroplets on Patterned Graphene
  32. In Situ Study of Molecular Structure of Water and Ice Entrapped in Graphene Nanovessels
  33. Advances in Graphene‐Based Liquid Cell Electron Microscopy: Working Principles, Opportunities, and Challenges
  34. Orthogonal liquid-jet impingement on wettability-patterned impermeable substrates
  35. Wettability-confined liquid-film convective cooling: Parameter study
  36. In Situ Transmission Electron Microscopy Explores a New Nanoscale Pathway for Direct Gypsum Formation in Aqueous Solution
  37. Precise Liquid Transport on and through Thin Porous Materials
  38. Surface-Wettability Patterning for Distributing High-Momentum Water Jets on Porous Polymeric Substrates
  39. Scaling Laws in Directional Spreading of Droplets on Wettability-Confined Diverging Tracks
  40. A methodology to produce eco-friendly superhydrophobic coatings produced from all-water-processed plant-based filler materials
  41. Carbon Nanotubes as Thermally Induced Water Pumps
  42. Rapid, Self-driven Liquid Mixing on Open-Surface Microfluidic Platforms
  43. Combating Frosting with Joule-Heated Liquid-Infused Superhydrophobic Coatings
  44. Spatially-selective cooling by liquid jet impinging orthogonally on a wettability-patterned surface
  45. Environmentally-safe and transparent superhydrophobic coatings
  46. Key design and operating parameters for enhancing dropwise condensation through wettability patterning
  47. Extremely stretchable and conductive water-repellent coatings for low-cost ultra-flexible electronics
  48. Sustaining dry surfaces under water
  49. Durable and flexible graphene composites based on artists’ paint for conductive paper applications
  50. Droplet Impacting a Cantilever: A Leaf-Raindrop System
  51. Magnetite (Fe3O4)-filled carbon nanofibers as electro-conducting/superparamagnetic nanohybrids and their multifunctional polymer composites
  52. Self-Driven One-Step Oil Removal from Oil Spill on Water via Selective-Wettability Steel Mesh
  53. Morphing and vectoring impacting droplets by means of wettability-engineered surfaces
  54. Enhancing Dropwise Condensation through Bioinspired Wettability Patterning
  55. Electrospinning Techniques to Control Deposition and Structural Alignment of Nanofibrous Scaffolds for Cellular Orientation and Cytoskeletal Reorganization
  56. The Fluid Diode: Tunable Unidirectional Flow through Porous Substrates
  57. Terahertz shielding of carbon nanomaterials and their composites – A review and applications
  58. Polymeric Films with Electric and Magnetic Anisotropy Due to Magnetically Assembled Functional Nanofibers
  59. Inkjet patterned superhydrophobic paper for open-air surface microfluidic devices
  60. Wettability patterning for high-rate, pumpless fluid transport on open, non-planar microfluidic platforms
  61. Surface engineering for phase change heat transfer: A review
  62. Water-Based Superhydrophobic Coatings for Nonwoven and Cellulosic Substrates
  63. Water-Based, Nonfluorinated Dispersions for Environmentally Benign, Large-Area, Superhydrophobic Coatings
  64. Barriers to Superfast Water Transport in Carbon Nanotube Membranes
  65. Quasi-optical terahertz polarizers enabled by inkjet printing of carbon nanocomposites
  66. Superoleophobic and conductive carbon nanofiber/fluoropolymer composite films
  67. Surface tension confined (STC) tracks for capillary-driven transport of low surface tension liquids
  68. Superhydrophobic–superhydrophilic binary micropatterns by localized thermal treatment of polyhedral oligomeric silsesquioxane (POSS)–silica films
  69. Novel Fluoropolymer Blends for the Fabrication of Sprayable Multifunctional Superhydrophobic Nanostructured Composites
  70. High strain sustaining, nitrile rubber based, large-area, superhydrophobic, nanostructured composite coatings
  71. Design and synthesis of superhydrophobic carbon nanofiber composite coatings for terahertz frequency shielding and attenuation
  72. Are Superhydrophobic Surfaces Best for Icephobicity?
  73. Superhydrophobic and conductive carbon nanofiber/PTFE composite coatings for EMI shielding
  74. Highly Liquid-Repellent, Large-Area, Nanostructured Poly(vinylidene fluoride)/Poly(ethyl 2-cyanoacrylate) Composite Coatings: Particle Filler Effects
  75. Resins with “Nano-Raisins”
  76. Poly(vinylidene fluoride) and Poly(ethyl 2‐cyanoacrylate) Blends through Controlled Polymerization of Ethyl 2‐Cyanoacrylates
  77. Fluidic delivery of homogeneous solutions through carbon tube bundles
  78. Elongational and shear rheology of carbon nanotube suspensions
  79. Chondrogenic Differentiation of Human Mesenchymal Stem Cells on Oriented Nanofibrous Scaffolds: Engineering the Superficial Zone of Articular Cartilage
  80. Mechanistic Examination of Protein Release from Polymer Nanofibers
  81. Composite thin films of poly(phenylene oxide)/poly(styrene) and PPO/silver via vapor phase deposition
  82. Biocompatible poly(vinylidene fluoride)/cyanoacrylate composite coatings with tunable hydrophobicity and bonding strength
  83. Smoothing of nanoscale roughness based on the Kelvin effect
  84. Electrospinning Techniques to Control Deposition and Structural Alignment of Nanofibrous Scaffolds for Cellular Orientation and Cytoskeletal Reorganization
  85. Electrospun fibrous nanocomposites as permeable, flexible strain sensors
  86. Electrospun Nanocomposites as Flexible Sensors
  87. Pressure-driven fluidic delivery through carbon tube bundles
  88. Desorption-Limited Mechanism of Release From Polymer Nanofibers
  89. Room-temperature, open-air, wet intercalation of liquids, surfactants, polymers and nanoparticles within nanotubes and microchannels
  90. Desorption-Limited Mechanism of Release from Polymer Nanofibers
  91. Selective Intercalation of Polymers in Carbon Nanotubes
  92. Dynamic Wetting of Aqueous Conductive Polymer Solutions on Thin Dielectric Coatings
  93. Co-electrospinning of Core−Shell Fibers Using a Single-Nozzle Technique
  94. Analysis and surface energy estimation of various model polymeric surfaces using contact angle hysteresis
  95. Evaluation and Testing of Organometallic Precursor for Copper Direct-Write
  96. Contact angle dynamics in droplets impacting on flat surfaces with different wetting characteristics
  97. Lines of dense nanoparticle colloidal suspensions evaporating on a flat surface: Formation of non-uniform dried deposits
  98. Heat Transfer Characteristics of Liquid Suspensions Containing Fluid-Filled Carbon Nanotubes
  99. Metal Line Interconnects Produced by Means of Printable Copper Precursor Solutions
  100. Soot graphitic order in laminar diffusion flames and a large-scale JP-8 pool fire
  101. Theoretical and experimental investigation of aqueous liquids contained in carbon nanotubes
  102. Electron microscope vualization of muliphase fluids contained in closed carbon nanotubes
  103. Thermal stimulation of aqueous volumes contained in carbon nanotubes: Experiment and modeling
  104. Observation of Water Confined in Nanometer Channels of Closed Carbon Nanotubes
  105. Dynamic surface tension measurements with submillisecond resolution using a capillary-jet instability technique
  106. Partial rebound of molten‐metal droplets impacting on solid substrates
  107. Dynamic surface tension measurements of molten Sn/Pb solder using oscillating slender elliptical jets
  108. Evaporative Transport of Aqueous Liquid in a Closed Carbon Nanotube: A Nano Heat Pipe?
  109. INK JET PROCESSING OF METALLIC NANOPARTICLE SUSPENSIONS FOR ELECTRONIC CIRCUITRY FABRICATION
  110. Wall structure and surface chemistry of hydrothermal carbon nanofibres
  111. A capillary-jet instability method for measuring dynamic surface tension of liquid metals
  112. Ink Jet Processing of Metallic Nanoparticle Suspensions for Electronic Circuitry Fabrication
  113. Fluid Transport and Phase Transition Experiments in Closed Multiwall Carbon Nanotubes
  114. DIRECT WRITE OF PASSIVE CIRCUITRY USING INK-JET TECHNOLOGY
  115. Attoliter fluid experiments in individual closed-end carbon nanotubes: Liquid film and fluid interface dynamics
  116. Agile micromirrors with three degrees of freedom manufactured with liquid MEMS technology
  117. Urodynamic evaluation of the human bladder response tgo an increase in outlet resistance
  118. Fine-line conductor manufacturing using drop-on demand PZT printing technology
  119. Freezing dynamics of molten solder droplets impacting onto flat substrates in reduced gravity
  120. In situ multiphase fluid experiments in hydrothermal carbon nanotubes
  121. Monitoring the flame synthesis of TiO2 particles by in-situ FTIR spectroscopy and thermophoretic sampling
  122. MEASUREMENT OF FRACTAL PROPERTIES OF SOOT AGGLOMERATES IN LAMINAR COFLOW DIFFUSION FLAMES USING THERMOPHORETIC SAMPLING IN CONJUNCTION WITH TRANSMISSION ELECTRON MICROSCOPY AND IMAGE PROCESSING
  123. Flame Synthesis of Spherical Nanoparticles
  124. Flame Synthesis of Spherical Nanoparticles
  125. Soot formation effects of oxygen concentration in the oxidizer stream of laminar coannular nonpremixed methane/air flames
  126. Manufacture of Microelectronic Circuitry by Drop-on-Demand Dispensing of Nano-particle Liquid Suspensions
  127. In-situ Fluid Experiments in Carbon Nanotubes
  128. Soot aerosol properties in laminar soot-emitting microgravity nonpremixed flames
  129. Fuel preheat effects on soot-field structure in laminar gas jet diffusion flames burning in 0-g and 1-g
  130. An Investigation of Key Factors Affecting Solder Microdroplet Deposition
  131. Impact and Solidification of Molten-Metal Droplets on Electronic Substrates
  132. Fuel Preheat Effects on Soot Formation in Soot-Emitting Laminar Microgravity Jet Diffusion Flames
  133. MODELING OF MULTIPLE VAPORIZING DROPLET STREAMS IN CLOSE SPACING CONFIGURATIONS
  134. Analysis of nanometre‐sized pyrogenic particles in the scanning transmission electron microscope
  135. Droplet spindown in a high-temperature gas environment
  136. Soot suppression by ferrocene in laminar ethylene/air nonpremixed flames
  137. Effects of rotating gaseous flows on transient droplet dynamics and heating
  138. Thermocapillary flow effects on convective droplet evaporation
  139. Soot-field structure in laminar soot-emitting microgravity nonpremixed flames
  140. Suspended droplet evaporation modeling in a laminar convective environment
  141. CALCULATIONS OF TANDEM DROPLET ARRAYS EVAPORATING NEAR A VERTICAL HOT PLATE
  142. Wetting effects on the spreading of a liquid droplet colliding with a flat surface: Experiment and modeling
  143. Internal droplet circulation induced by surface-driven rotation
  144. FINITE DIFFERENCE DISCRETIZATION EFFECTS ON MULTIDIMENSIONAL DROPLET EVAPORATION MODELING
  145. Iron/soot interaction in a laminar ethylene nonpremixed flame
  146. Modeling of the deformation of a liquid droplet impinging upon a flat surface
  147. Liquid-Phase Variable Property Effects in Multicomponent Droplet Convective Evaporation
  148. Comparison between experimental measurements and numerical predictions of internal temperature distributions of a droplet vaporizing under high-temperature convective conditions
  149. Multicomponent Droplet Vaporization in a Laminar Convective Environment
  150. Numerical modeling of a slurry droplet containing a spherical particle
  151. PRESOLIDIFICATION LIQUID METAL DROPLET COOLING UNDER CONVECTIVE CONDITIONS
  152. Absorption and scattering of light by polydisperse aggregates
  153. Numerical modeling of a vaporizing multicomponent droplet
  154. Morphological Description of Flame-Generated Materials
  155. Numerical modeling of a vaporizing slurry droplet
  156. A Bimodal Integral Solution of the Dynamic Equation for an Aerosol Undergoing Simultaneous Particle Inception and Coagulation
  157. Comparison of Soot Growth and Oxidation in Smoking and Non–Smoking Ethylene Diffusion Flames
  158. Soot aerosol dynamics in a laminar ethylene diffusion flame
  159. An Integral Solution of the Aerosol Dynamic Equation Including Surface Growth Reactions
  160. Morphology of flame-generated soot as determined by thermophoretic sampling