All Stories

  1. Interplay between Cu and Fe in the phase formation of recycled aluminium cast alloys

    Article • Materials Today Communications, December 2025, Elsevier

    Cecilia Poletti

  2. Strengthening effect of Mo in biocompatible titanium alloys

    Article • Materials Science and Engineering A, December 2025, Elsevier

    Cecilia Poletti

  3. Deformation bands in a Ti17 alloy during deformation above the β-transus temperature

    Article • Materials Science and Engineering A, November 2025, Elsevier

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  4. Linking Heat Treatment to Plastic Deformation in Pearlitic Steels Through Mesoscale Modeling

    Article • Advanced Engineering Materials, September 2025, Wiley

    Cecilia Poletti

  5. Influence of copper and heat treatments on the pit formation of cast AlSi10Mg alloys

    Article • Journal of Materials Research and Technology, July 2025, Elsevier

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  6. Crystallographic texture prediction of torsioned aluminum wire using hybrid of machine learning and multi-scale crystal plasticity

    Article • Materials Characterization, June 2025, Elsevier

    Cecilia Poletti

  7. Fatigue Crack Growth Simulation of R260 Grade Pearlitic Rail Steel Using the Discrete Element Method

    Article • Machines, April 2025, MDPI AG

    Cecilia Poletti

  8. A meso-scale model to predict flow stress and microstructure during hot deformation of IN718WP

    Article • International Journal of Plasticity, April 2025, Elsevier

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  9. Phase transformation and recrystallization of cold-rolled AISI 304L austenitic stainless steel during annealing

    Article • Materials & Design, April 2025, Elsevier

    Cecilia Poletti

  10. Fatigue Crack Growth Simulation of R260 Rail Grade Pearlitic Steel Using the Discrete Element Method

    Article • March 2025, MDPI AG

    Cecilia Poletti

  11. Ageing response of Ni-rich NiTi shape memory alloy additively manufactured by electron beam freeform fabrication

    Article • Journal of Materials Research and Technology, March 2025, Elsevier

    Cecilia Poletti

  12. Effects of recovery and phase transformation on the recrystallization kinetics of Ti-6Al-4V during β-processing

    Article • Materials Science and Engineering A, February 2025, Elsevier

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  13. Analysis of Nonuniform Deformation in Aluminum Wires Under Varying Torsional Loads Using EBSD Measurement and Multiscale Crystal Plasticity

    Article • Metals, January 2025, MDPI AG

    Cecilia Poletti

  14. A Meso-Scale Model to Describe the Creep Response and Microstructure Evolution of Superalloy IN-718

    Article • Transactions of the Indian Institute of Metals, January 2025, Springer Science + Business Media

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  15. Fracture behavior of simulated heat affected zones in S690QL high strength steel

    Article • Procedia Structural Integrity, January 2025, Elsevier

    Cecilia Poletti

  16. THERMOMECHANICAL PROCESSING OF NEAR BETA TITANIUM ALLOYS

    Article • January 2025, University Library in Kragujevac

    Cecilia Poletti

  17. Heterogeneous dynamic restoration of Ti–15Mo alloy during hot compression

    Article • Journal of Materials Research and Technology, November 2024, Elsevier

    Cecilia Poletti

  18. The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels

    Article • Materials, September 2024, MDPI AG

    Cecilia Poletti

  19. The Influence of Thermomechanical Conditions on the Hot Ductility of Steels

    Article • August 2024, MDPI AG

    Cecilia Poletti

  20. A predictive mesoscale model for continuous dynamic recrystallization

    Article • International Journal of Plasticity, August 2024, Elsevier

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  21. Al- and Ta-Modified Alloy 740 Superalloy Castings Produced in Non-vacuum Conditions—Microstructure and Selected Properties

    Article • Metallurgical and Materials Transactions A, July 2024, Springer Science + Business Media

    Cecilia Poletti

  22. Influence of the heat treatment path on the precipitation sequence in an AlSi7Cu0.5Mg-alloy

    Article • Journal of Alloys and Compounds, June 2024, Elsevier

    Cecilia Poletti

  23. A comprehensive mean-field approach to simulate the microstructure during the hot forming of Ti-17

    Article • Materials Science and Engineering A, June 2024, Elsevier

    Cecilia Poletti

  24. Structural and Functional Advanced Materials

    Article • May 2024, Trans Tech Publications

    Cecilia Poletti

  25. Representation of the microstructure of pearlitic steels for DEM simulations of fatigue

    Article • Wear, March 2024, Elsevier

    Cecilia Poletti

  26. The effect of thermomechanical welding on the microstructure and mechanical properties of S700MC steel welds

    Article • Welding in the World, February 2024, Springer Science + Business Media

    Cecilia Poletti

  27. Dynamic recrystallisation in Inconel®718 at creep conditions

    Article • Materials Science and Engineering A, February 2024, Elsevier

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  28. Crystallographic Texture Prediction of Torsioned Aluminium Wire Using Hybrid of Machine Learning and Multi-Scale Crystal Plasticity

    Article • January 2024, Elsevier

    Cecilia Poletti

  29. Influence of the Heat Treatment Path on the Precipitation Sequence in an Alsi7cu0.5mg-Alloy

    Article • January 2024, Elsevier

    Cecilia Poletti

  30. Phase transformation kinetics in a coarse-grain Ti17 alloy determined by laser ultrasonics and dilatometry

    Article • Materials Today Communications, December 2023, Elsevier

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  31. Modeling the hot deformation behavior of micro-alloyed steel in the single and two-phase fields

    Article • Journal of Physics Conference Series, November 2023, Institute of Physics Publishing

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  32. Thermomechanical treatments for a dual phase cast high entropy alloy

    Article • Journal of Alloys and Compounds, September 2023, Elsevier

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  33. The electron beam freeform fabrication of NiTi shape memory alloys. Part II: Influence of the heat treatment on the superelastic behaviour

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, June 2023, SAGE Publications

    Cecilia Poletti

  34. Hot deformation mechanisms of dual phase high entropy alloys

    Article • Materials Science and Engineering A, June 2023, Elsevier

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  35. Metamodelling the hot deformation behaviour of titanium alloys using a mean-field approach

    Article • Materials Today Communications, June 2023, Elsevier

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  36. Microstructure refinement of a cast high entropy alloy by thermomechanical treatments

    Article • Materials Science and Engineering A, May 2023, Elsevier

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  37. Influence of thermomechanical treatments on the microstructure and mechanical properties of AISI 304L welds

    Article • Welding International, February 2023, Taylor & Francis

    Cecilia Poletti

  38. Dynamic Recrystallisation in Inconel®718 at Creep Conditions

    Article • January 2023, Elsevier

    Cecilia Poletti

  39. Metamodelling the Hot Deformation Behaviour of Titanium Alloys Using a Mean-Field Approach

    Article • January 2023, Elsevier

    Cecilia Poletti

  40. Functional and Engineering Materials

    Article • December 2022, Trans Tech Publications

    Cecilia Poletti

  41. Topological aspects in the microstructural evolution of AA6082 during hot plastic deformation

    Article • European Journal of Materials, October 2022, Taylor & Francis

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  42. Analysis and Modeling of Stress–Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

    Article • Materials, October 2022, MDPI AG

    Cecilia Poletti

  43. Stress Relaxation during Artificial Aging of an AlSi7Cu0.5Mg Cast Alloy

    Article • Crystals, August 2022, MDPI AG

    Cecilia Poletti

  44. An advanced dislocation density-based approach to model the tensile flow behaviour of a 64.7Ni–31.96Cu alloy

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, April 2022, Taylor & Francis

    Cecilia Poletti

  45. High-Resolution Microstructure Characterization of Additively Manufactured X5CrNiCuNb17-4 Maraging Steel during Ex and In Situ Thermal Treatment

    Article • Materials, December 2021, MDPI AG

    Cecilia Poletti

  46. Comparative thermal fatigue behavior of AlSi7Mg alloy produced by L-PBF and sand casting

    Article • International Journal of Fatigue, November 2021, Elsevier

    Cecilia Poletti

  47. Effects of Cr on NiAl (β′) Precipitation in Ferritic Fe-Ni-Al Alloys

    Article • Metallurgical and Materials Transactions A, June 2021, Springer Science + Business Media

    Cecilia Poletti

  48. Corrigendum to “Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model” [Materials and Design 197 (2021) 109266]

    Article • Materials & Design, May 2021, Elsevier

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  49. The Behaviours of Alloys under Thermo-Mechanical Treatment

    Article • Metals, April 2021, MDPI AG

    Cecilia Poletti

  50. Hot Deformation Behavior of a Ni-Based Superalloy with Suppressed Precipitation

    Article • Metals, April 2021, MDPI AG

    Cecilia Poletti

  51. Initiation of Dynamic Recrystallization of As-Cast N08028 Alloy

    Article • March 2021, University of Liege

    Cecilia Poletti

  52. Microstructure Evolution and Phase Identification in Ni-Based Superalloy Bonded by Transient Liquid Phase Bonding

    Article • Metallurgical and Materials Transactions B, March 2021, Springer Science + Business Media

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  53. TEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPB

    Article • Metallurgical and Materials Transactions A, February 2021, Springer Science + Business Media

    Cecilia Poletti

  54. THERMEC 2021

    Article • January 2021, Trans Tech Publications

    Cecilia Poletti

  55. A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy

    Article • International Journal of Plasticity, January 2021, Elsevier

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  56. Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model

    Article • Materials & Design, January 2021, Elsevier

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  57. Refinement of the Ti-17 microstructure after hot deformation: Coupled mesoscale model

    Article • Materials Science and Engineering A, January 2021, Elsevier

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  58. Improved Predictability of Microstructure Evolution during Hot Deformation of Titanium Alloys

    Article • Materials, December 2020, MDPI AG

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  59. Thermal fatigue testing of laser powder bed fusion (L-PBF) processed AlSi7Mg alloy in presence of a quasi-static tensile load

    Article • Materials Science and Engineering A, July 2020, Elsevier

    Cecilia Poletti, Dr Mateusz M Skalon

  60. Modelling the Competitive Growth of Primary, Allotriomorphic, and Secondary Alpha in Ti-6Al-4V

    Article • Metallurgical and Materials Transactions A, June 2020, Springer Science + Business Media

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  61. In-situ characterization of continuous dynamic recrystallization during hot torsion of an Al–Si–Mg alloy

    Article • Journal of Alloys and Compounds, May 2020, Elsevier

    Cecilia Poletti

  62. Analysis of Splitting and Martensitic Transformation of AlNi Intermetallic Obtained by Transient Liquid Phase Bonding

    Article • Metallurgical and Materials Transactions B, March 2020, Springer Science + Business Media

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  63. Flow modelling of Ti6Al4V under large strains

    Article • MATEC Web of Conferences, January 2020, EDP Sciences

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  64. Phase transformation sequence of Ti-6Al-4V as a function of the cooling rate

    Article • MATEC Web of Conferences, January 2020, EDP Sciences

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin

  65. Strengthening mechanisms of Al wires processed by equal channel angular torsion drawing

    Article • Materials Science and Technology, November 2019, Taylor & Francis

    Cecilia Poletti

  66. In-Situ Synchrotron X-Ray Diffraction of Ti-6Al-4V During Thermomechanical Treatment in the Beta Field

    Article • Metals, August 2019, MDPI AG

    Cecilia Poletti

  67. A continuous dynamic recrystallization model to describe the hot deformation behaviour of a Ti5553 alloy

    Article • Journal of Physics Conference Series, August 2019, Institute of Physics Publishing

    Dr. Ricardo Henrique Buzolin, Cecilia Poletti

  68. Continuous dynamic recrystallization during hot torsion of an aluminum alloy.

    Article • Journal of Physics Conference Series, August 2019, Institute of Physics Publishing

    Cecilia Poletti

  69. Microstructure development of molybdenum during rotary friction welding

    Article • Materials Characterization, May 2019, Elsevier

    Dr. Ricardo Henrique Buzolin, Dr Norbert Enzinger, Cecilia Poletti

  70. A flow instability criterion for alloys during hot deformation

    Article • Procedia Manufacturing, January 2019, Elsevier

    Cecilia Poletti

  71. Microstructure Evolution of Ti-5Al-5V-5Mo-3Cr after Hot Deformation at Large and Moderate Strains

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Cecilia Poletti, Dr. Ricardo Henrique Buzolin, Dr Peng WANG

  72. Diffusion-defining atomic-scale spinodal decomposition within nanoprecipitates

    Article • Nature Materials, November 2018, Springer Science + Business Media

    Cecilia Poletti

  73. Load partition and microstructural evolution during hot deformation of Ti-6Al-6V-2Sn matrix composites, and possible strengthening mechanisms

    Article • Journal of Alloys and Compounds, October 2018, Elsevier

    Cecilia Poletti

  74. Creep modelling of P91 steel employing a microstructural based hybrid concept

    Article • Engineering Fracture Mechanics, September 2018, Elsevier

    Cecilia Poletti

  75. Microstructure Evolution in a 6082 Aluminium Alloy during Thermomechanical Treatment

    Article • Materials, July 2018, MDPI AG

    Cecilia Poletti

  76. Modelling and simulation of diffusion driven pore formation in martensitic steels during creep

    Article • Materials Science and Engineering A, January 2018, Elsevier

    Cecilia Poletti

  77. Characterizing dislocation configurations and their evolution during creep of a new 12% Cr steel

    Article • Materials Characterization, December 2017, Elsevier

    Cecilia Poletti

  78. Investigation of creep cavities in a novel 12Cr0.36Ta steel employing three-dimensional electron backscatter diffraction technique

    Article • Materials Letters, November 2017, Elsevier

    Cecilia Poletti

  79. Enhancing mechanical properties of wires by a novel continuous severe plastic deformation method

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), September 2017, De Gruyter

    Cecilia Poletti

  80. Thermomechanical investigation of the production process of a creep resistant martensitic steel

    Article • January 2017, American Institute of Physics

    Cecilia Poletti

  81. Influence of the degree of scandium supersaturation on the precipitation kinetics of rapidly solidified Al-Mg-Sc-Zr alloys

    Article • Acta Materialia, September 2016, Elsevier

    Cecilia Poletti

  82. Influence of Al3(Sc,Zr) Precipitates on Deformability and Friction Stir Welding Behavior of Al-Mg-Sc-Zr Alloys

    Article • BHM Berg- und Hüttenmännische Monatshefte, June 2016, Springer Science + Business Media

    Cecilia Poletti

  83. Evolution of the substructure of a novel 12% Cr steel under creep conditions

    Article • Materials Characterization, May 2016, Elsevier

    Cecilia Poletti

  84. Modelling the creep behaviour of tempered martensitic steel based on a hybrid approach

    Article • Materials Science and Engineering A, April 2016, Elsevier

    Cecilia Poletti

  85. Load partition and microstructural evolution during in situ hot deformation of Ti–6Al–6V–2Sn alloys

    Article • Materials Science and Engineering A, March 2016, Elsevier

    Cecilia Poletti

  86. Unified description of the softening behavior of beta-metastable and alpha+beta titanium alloys during hot deformation

    Article • Materials Science and Engineering A, January 2016, Elsevier

    Cecilia Poletti

  87. In-situ observation of recrystallization in an AlMgScZr alloy using confocal laser scanning microscopy

    Article • Materials Characterization, October 2015, Elsevier

    Cecilia Poletti

  88. Material Forming ESAFORM 2015

    Article • July 2015, Trans Tech Publications

    Cecilia Poletti

  89. Adaptive multiscale modelling of metal alloy treatment process

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Dr Piotr Macioł, Cecilia Poletti

  90. Flow Localization Modelling in Ti Alloys and Ti Matrix Composites

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Cecilia Poletti

  91. Microstructure Evolution and Hardness Distribution in Al Wires Subjected to Simultaneous Tension-Torsion Deformation

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Cecilia Poletti

  92. Study of the Hot Deformation Behaviour of Metal-based Alloys with Reference to Processing Maps

    Article • BHM Berg- und Hüttenmännische Monatshefte, June 2015, Springer Science + Business Media

    Cecilia Poletti

  93. Characterisation and quantification of cavities in 9Cr martensitic steel for power plants

    Article • Materials Science and Technology, March 2015, SAGE Publications

    Cecilia Poletti

  94. Investigation of Pre‐Existing Pores in Creep Loaded 9Cr Steel

    Article • July 2014, Wiley

    Cecilia Poletti

  95. Investigation of the Precipitation Kinetics of a New Al-Mg-Sc-Zr Alloy

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Cecilia Poletti

  96. Investigation of the Hot Deformation Behavior of an Al-Mg-Sc-Zr Alloy under Plane Strain Condition

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Cecilia Poletti

  97. Modelling of the Ductile Damage Behaviour of a Beta Solidifying Gamma Titanium Aluminide Alloy during Hot-Working

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Cecilia Poletti

  98. Studies on Ductile Damage and Flow Instabilities during Hot Deformation of a Multiphase γ-TiAl Alloy

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Cecilia Poletti

  99. Friction Stir Welding of Aluminum Metal Matrix Composite Containers for Electric Components

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Dr Norbert Enzinger, Cecilia Poletti

  100. Investigations into the delayed fracture susceptibility of 34CrNiMo6 steel, and the opportunities for its application in ultra-high-strength bolts and fasteners

    Article • Materials Science and Engineering A, January 2014, Elsevier

    Cecilia Poletti

  101. MODELING OF TWO-PHASE GRAIN STRUCTURE IN THE TITANIUM ALLOY TI-6AL-4V USING CELLULAR AUTOMATA

    Article • International Journal for Multiscale Computational Engineering, January 2014, Begell House

    Cecilia Poletti

  102. Thermomechanical behavior of different Ni-base superalloys during cyclic loading at elevated temperatures

    Article • MATEC Web of Conferences, January 2014, EDP Sciences

    Cecilia Poletti

  103. Physical simulation of hot deformation and microstructural evolution of AISI 1016 steel using processing maps

    Article • Materials Science and Engineering A, December 2013, Elsevier

    Cecilia Poletti

  104. Deformation Mechanisms in the Near-β Titanium Alloy Ti-55531

    Article • Metallurgical and Materials Transactions A, November 2013, Springer Science + Business Media

    Cecilia Poletti

  105. Compression-creep response of magnesium alloy DieMag422 containing barium compared with the commercial creep-resistant alloys AE42 and MRI230D

    Article • Materials Science and Engineering A, November 2013, Elsevier

    Cecilia Poletti

  106. Hot Deformation Studies of a Low Carbon Steel Containing V

    Article • Key Engineering Materials, June 2013, Trans Tech Publications

    Cecilia Poletti

  107. Law of mixture used to model the flow behavior of a duplex stainless steel at high temperatures

    Article • Materials Chemistry and Physics, May 2013, Elsevier

    Cecilia Poletti

  108. Microstructural Evolution of AA6082 with Small Aluminides under Hot Torsion and Friction Stir Processing

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Cecilia Poletti

  109. Modeling of Dual-Phase Grain Structure in Ti-6Al-4V during Isothermal and Non-Isothermal Heat Treatment by Using Cellular Automata

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Cecilia Poletti

  110. Corrigendum to “Microstructure development in hot deformed AA6082” [Mater. Sci. Eng. A 528 (2011) 2423–2430]

    Article • Materials Science and Engineering A, March 2013, Elsevier

    Cecilia Poletti

  111. Precipitation kinetics in warm forming of AW-7020 alloy

    Article • Materials Science and Engineering A, January 2013, Elsevier

    Cecilia Poletti

  112. Hot Deformation of AA6082 Containing Fine Intermetallic Particles

    Article • Metallurgical and Materials Transactions A, October 2012, Springer Science + Business Media

    Cecilia Poletti

  113. Hot Deformation Study by Processing Maps of N Containing Microalloyed Steel

    Article • May 2012, Wiley

    Cecilia Poletti

  114. Influence of Strain Rate on Hot Ductility of a V‐Microalloyed Steel Slab

    Article • steel research international, March 2012, Wiley

    Cecilia Poletti

  115. Determination of the Mechanism of Restoration in Subtransus Hot Deformation of Ti-6Al-4V

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Cecilia Poletti

  116. Hot Deformation Behaviour of Low Alloyed Steel

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Cecilia Poletti

  117. Microstructure Evolution of Allotropic Materials during Thermomechanical Processing

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Cecilia Poletti

  118. Extruded Al–Al2O3 composites formed in situ during consolidation of ultrafine Al powders: Effect of the powder surface area

    Article • Materials Science and Engineering A, November 2011, Elsevier

    Martin Balog, Cecilia Poletti

  119. Study of the hot deformation behaviour in Ti–5Al–5Mo–5V–3Cr–1Zr

    Article • Materials Science and Engineering A, October 2011, Elsevier

    Cecilia Poletti

  120. The effect of native Al2O3 skin disruption on properties of fine Al powder compacts

    Article • Journal of Alloys and Compounds, June 2011, Elsevier

    Martin Balog, Cecilia Poletti

  121. Hot Deformation Behaviour of Low Alloy Steel

    Article • steel research international, April 2011, Wiley

    Cecilia Poletti

  122. Microstructure development in hot deformed AA6082

    Article • Materials Science and Engineering A, March 2011, Elsevier

    Cecilia Poletti

  123. Characterization of the microstructure and damage mechanisms in a Ti6Al4V alloy modified with 1 wt.% B

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), September 2010, De Gruyter

    Cecilia Poletti

  124. Microstructural Features of AZ31 Deformed at High Temperatures

    Article • Practical Metallography, September 2010, De Gruyter

    Cecilia Poletti

  125. High-temperature strength of compacted sub-micrometer aluminium powder

    Article • Acta Materialia, June 2010, Elsevier

    Martin Balog, Cecilia Poletti

  126. Microstructure evolution during hot deformation of Ti-6Al-4V double cone specimens

    Article • International Journal of Material Forming, April 2010, Springer Science + Business Media

    Cecilia Poletti

  127. Local deformation of Ti6Al4V modified 1wt% B and 0.1wt% C

    Article • Materials Science and Engineering A, February 2010, Elsevier

    Cecilia Poletti

  128. Mechanical properties of particle reinforced titanium and titanium alloys

    Article • Kovove Materialy-Metallic Materials, January 2010, Central Library of the Slovak Academy of Sciences

    Cecilia Poletti

  129. Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick–Baez optics

    Article • Scripta Materialia, October 2009, Elsevier

    Cecilia Poletti

  130. Local deformation and processing maps of as-cast AZ31 alloy

    Article • Materials Science and Engineering A, August 2009, Elsevier

    Cecilia Poletti

  131. Production of titanium matrix composites reinforced with SiC particles

    Article • Composites Science and Technology, July 2008, Elsevier

    Martin Balog, Cecilia Poletti

  132. Processing maps of Ti662 unreinforced and reinforced with TiC particles according to dynamic models

    Article • Materials Science and Engineering A, July 2008, Elsevier

    Cecilia Poletti

  133. Wear and Friction Coefficient of Particle Reinforced Ti‐Alloys

    Article • Materialwissenschaft und Werkstofftechnik, October 2004, Wiley

    Cecilia Poletti

  134. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), De Gruyter

    Cecilia Poletti