All Stories

  1. Numerical Study of a Hydraulic Turbine Designed from Centrifugal Atomizers Theory Varying Its Inlet Parameters

    Article • Fluids, March 2025, MDPI AG

    Dr Carlos Raymundo

  2. Study of Internal Flow in a Liquid Nitrogen Flow Decelerator Through Swirl Effect Consisting of a Jet-Type Cryogenic Injection System for Food Freezing

    Article • Fluids, December 2024, MDPI AG

    Dr Carlos Raymundo

  3. Comprehensive Theoretical Formulation and Numerical Simulation of the Internal Flow in Pressure-Swirl Atomizers Type Screw-Conveyer

    Article • Energies, October 2024, MDPI AG

    Dr Carlos Raymundo

  4. Numerical Simulation and Design of a Mechanical Structure of an Ankle Exoskeleton for Elderly People

    Article • Technologies, July 2024, MDPI AG

    Dr Carlos Raymundo

  5. Development of a Low-Cost Device for Respiratory Frequency Measurement and Anomaly Detection

    Article • January 2024, Springer Science + Business Media

    Dr Carlos Raymundo

  6. Evaluation of the Application of Activated Carbon in Acid Drainage Remediation

    Article • January 2024, Springer Science + Business Media

    Dr Carlos Raymundo

  7. Internal Flow Model of a Helical Centrifugal Atomizer for Cold Preservation Systems in the Fishing Industry

    Article • January 2024, Springer Science + Business Media

    Dr Carlos Raymundo

  8. Structural Model of a Hydrostatic Cryogenic Liquid Storage and Pressurization Tank in the Food Sector

    Article • January 2024, Springer Science + Business Media

    Dr Carlos Raymundo

  9. Micro and Nano-Silica Additions to Optimize the Compressive Strength of Shotcrete

    Article • International Journal of Engineering Trends and Technology, December 2023, Seventh Sense Research Group Journals

    Dr Carlos Raymundo

  10. Study of Internal Flow in Open-End and Closed Pressure-Swirl Atomizers with Variation of Geometrical Parameters

    Article • Aerospace, October 2023, MDPI AG

    Dr Carlos Raymundo

  11. Minimally Active Neutralization of Acid Mine Drainage through the Monte Carlo Method

    Article • Water, October 2023, MDPI AG

    Dr Carlos Raymundo

  12. Analysis and Design of a Non-Invasive Wood Moisture Sensor

    Article • October 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  13. Continuous Improvement Model under the Lean Six Sigma and KPIs approach to reduce unproductive times in the loading and hauling stage in surface mining

    Article • October 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  14. Lean Safety Model to reduce accidents in conventional subway mining haulage activities

    Article • October 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  15. Model of a Safety Management System through Continuous Improvement (PDCA) for Artisanal Mining

    Article • October 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  16. Prediction model by probabilistic methods for the evaluation of variables in underground mining pumping systems of variables in pumping systems in subway mining

    Article • October 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  17. Rock mass classification method applying neural networks to minimize geomechanical characterization in underground Peruvian mines

    Article • Energy Reports, September 2023, Elsevier

    Dr Carlos Raymundo

  18. Development of a turbine spirometer prototype and signal digitalization

    Article • July 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  19. Corrigendum: Artificial neural network model to predict student performance using nonpersonal information

    Article • Frontiers in Education, March 2023, Frontiers

    Dr Carlos Raymundo

  20. Artificial neural network model to predict student performance using nonpersonal information

    Article • Frontiers in Education, February 2023, Frontiers

    Dr Carlos Raymundo

  21. Application of Bayesian networks for the prediction of gas accidents in semi-mechanized underground operations on the southern coast of Peru

    Article • January 2023, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  22. Propose the surface flow constructed wetland in the treatment of acid drainage in the closure of a tailings deposit

    Article • January 2023, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  23. Study of Internal Flow and Three Dimensional Numerical Simulation of a Closed and Open-End Pressure-Swirl Atomizer of a Rocket Engine

    Article • January 2023, Elsevier

    Dr Carlos Raymundo

  24. Digitization model for costs and operating times reduction in Peruvian Banks

    Article • Energy Reports, November 2022, Elsevier

    Dr Carlos Raymundo

  25. Pre-split blasting design to reduce costs and improve safety in underground mining

    Article • Energy Reports, November 2022, Elsevier

    Dr Carlos Raymundo

  26. Application of Lean Manufacturing to Improve the Duct Production Process of an Air Conditioning Company in the Year 2021

    Article • International Journal of Engineering Trends and Technology, March 2022, Seventh Sense Research Group Journals

    Dr Carlos Raymundo

  27. The Demand Driven MRP Implementation in Complex Manufacturing Industries: A Systematic Literature Reviews

    Article • International Journal of Engineering Trends and Technology, March 2022, Seventh Sense Research Group Journals

    Dr Carlos Raymundo

  28. Business model to increase the profitability of a plastic products company using digital marketing and lead management.

    Article • January 2022, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  29. Methodology to improve marketing in an olive company through the use of Scrum and Digital Marketing.

    Article • January 2022, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  30. Methodology to increase productivity in a production process in a textile company by means of 5S and Standard Work.

    Article • January 2022, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  31. BPM Model of Design Management Under a Design Thinking Approach to Implement New Products in Textile SMEs

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  32. Calculation of the Probability of Landslides Caused by Precipitation Applying the Janbu and MonteCarlo Method in Skarn-Type Mineral Deposits

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  33. Compressive Stress Analysis in an Underground Mining Geomechanical Model with Long Holes for Stability in Advance Work through Uniaxial Compression Tests

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  34. Cost of Sale Reduction in a Company Within the Restaurant Industry Using a Procurement Model Based on Supply Chain Management and Lean Philosophy

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  35. Geostatistical Method Used in Quarry-Type Exploitation Based on Gaussian Simulation to Reduce the Uncertainty of Hydrogeological Values in Surface Mining in Peru

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  36. Integrated Lean Model Under the Theory of Constraints Approach that Allows Increased Production in Cement Companies in Lima, Peru

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  37. Inventory Optimization Model Applying the FIFO Method and the PHVA Methodology to Improve the Stock Levels of Olive Products in SMEs of the Agro-Industrial Sector in Peru

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  38. Lean Green Production Management Model Under a Circular Economy Approach for Reducing Variable Costs at a Small Plastics Business

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  39. Lean Maintenance Management Model, Based on TPM and 5S to Increase the Availability of Machines in the Plastics Industry

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  40. Lean Manufacturing Model for Production Management Under Design Thinking Approach to Increase Productivity of Musical Instrument SMEs

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  41. Lean Manufacturing Model of Production Management Make to Order Based on QRM to Reduce Order Delivery Times in Metal-Mechanical SMEs

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  42. Maintenance Service Management Model Based on Vehicle Routing Problem and Time Study to Reduce Lead Time in an ATM Maintenance Company

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  43. Model for Optimization of Spaces Through the Redistribution of Warehouse and Application of Lean Logistics to Reduce Service Times Within an Air Cargo Company

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  44. Predictive Model Influenced by External Factors to Reduce Uncertainty in the Budget Forecast of a Gold Mining Company

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  45. Production Management Method Based on Agile Approach and Lean Manufacturing Tools to Increase Production Levels in Peruvian Metalworking MSMEs

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  46. Production Management Model Based on Lean Manufacturing and SLP to Increase Efficiency in the Tapestry Manufacturing Process in Lima Manufacturing SMEs

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  47. Production Management Model for the Evaluation of Operator's Posture-Base Measurement and to Redesign Work Area to Improve Labor Productivity in a Manufacturing SME

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  48. Production Planning and Control Model to Increase On-Time Deliveries Through Demand-Driven MRP and PDCA in a Make-to-Order Environment of Non-primary Manufacturing Industry

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  49. Resource Management Model to Reduce Maintenance Service Times for SMEs in Lima-Peru

    Article • September 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  50. Increasing e-government adoption by emphasizing environmental sustainability: an extended case study in Peru

    Article • Transforming Government People Process and Policy, April 2021, Emerald

    PhD Carlos Raymundo, Dr Carlos Raymundo

  51. Lean Service Model for Maintenance Management Using a Linear Programing Approach

    Article • March 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  52. Productivity Improvement Model Using the Business Transformation Approach in Poultry Processing Plants

    Article • March 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  53. Lean Manufacturing Model Using a Biotechnological Approach for Increasing Efficiency and Reducing Waste at a Small Plastic Production Company

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  54. Method for the Identification of Criticality Levels Through Microtectonic and Geotectonic Studies in Surface Outcrops with a Potential Impact on Underground Mining Works

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  55. Modelo Comparativo De Las Propiedades Físico-Mecánicas Del Shotcrete Con Contenido De Fibras De Acero Y Polipropileno Empleado En El Sostenimiento De Labores Mineras Subterraneas Del Perú

    Article • January 2021, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  56. Metodología De Toma De Decisión De Un Sistema De Drenaje De Aguas Subterráneas Utilizando El Proceso Analítico Jerárquico (AHP) Simplificado En Minería Superficial

    Article • January 2021, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  57. Evaluation Method in Multiple Scenarios by Means of Datamine Applying the Law of Variable Cutting in Optimization of the NPV in Open Pit

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  58. Modelo Hidrogeológico Basado En El Método Numérico De Profundización, Aplicando La Técnica Back Propagation Neural Network Para La Evaluación De Grandes Filtraciones De Agua En El Interior De Una Mina Subterranea Del Perú

    Article • January 2021, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  59. Lean Manufacturing Model for Production Management Based on SAP-LAP to Reduce Delays in the Production Line in Mypes of the Metalworking Sector

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  60. Management Model Based on the Application of the DEA (Data Envelopment Analysis) and 5s Method to Improve the Efficiency of Production Processes in the Coffee Agronomic Sector

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  61. Method of Implementation of Air Chambers Using Recycled Rubber Based on Positioning for the Optimization of Fragmentation in Open-Pit Blasting

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  62. Modelo De Mantenimiento Predictivo Basado En El Análisis Del Dispatch Para El Incremento De La Utilizacion Efectiva

    Article • January 2021, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  63. Predictive Model of Rock Fragmentation Using the Neuro-Fuzzy Inference System (ANFIS) and Particle Swarm Optimization (PSO) to Estimate Fragmentation Size in Open Pit Mining

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  64. Método De Predicción De Estallido De Roca En Minería Subterránea De Gran Profundidad Basado En Extreme Learning Machine

    Article • January 2021, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  65. Shotcrete Elaboration Method Using Geopolymer Cement Product of the Alkaline Activation of Tailings for the Support of Underground Work in Polymetallic Mines of Peru

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  66. Stability Method for Pit Dimensioning Obtained Using the Gradient Boosting Machine Algorithm in Underground Mining

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  67. Modelo De Ecuaciones Estructurales Para El Análisis De Accidentes Basado En El Sistema De Clasificación De Factores Humanos En Minas Subterráneas Del Perú

    Article • January 2021, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  68. Sustainment Method in Gold-Bearing Workings Using Woodpacks to Mitigate the Induced Stresses that Cause Instability in an Underground Mine that Uses Longwall Exploitation

    Article • January 2021, Springer Science + Business Media

    Dr Carlos Raymundo

  69. Waste Elimination Model Based on Lean Manufacturing and Lean Maintenance to Increase Efficiency in the Manufacturing Industry

    Article • IOP Conference Series Materials Science and Engineering, December 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  70. Waste Reduction with Lean Manufacturing Model in an Alpaca Wool Workshop

    Article • IOP Conference Series Materials Science and Engineering, December 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  71. A Strategic Lean Procurement Model Based on Supplier Approval to Reduce Unplanned Downtime in a Textile Small and Medium-Sized Enterprises

    Article • December 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  72. Digital Transformation Model with a Focus on Total Quality Management and Lean Manufacturing to Increase Online Sales in Textile SMEs

    Article • December 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  73. Hydraulic Fill Assessment Model Using Weathered Granitoids Based on Analytical Solutions to Mitigate Rock Mass Instability in Conventional Underground Mining

    Article • December 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  74. Lean Six Sigma Fleet Management Model for the Optimization of Ore Transportation in Mechanized Underground Mines in Peru

    Article • December 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  75. Lean Startup in a Commercial Management Model Based on Digital Marketing to Increase Sales in Companies of the Health Food Industry

    Article • December 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  76. Production Control Model Using Lean Manufacturing Tools and Kanban/CONWIP Systems to Improve Productivity in the Process of Sand Casting in a Heavy Metalworking SME

    Article • December 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  77. Production Model Under Lean Manufacturing and Change Awareness Approaches to Reduce Order Delays at Small and Medium-Sized Enterprises from the Clothing Sector in Peru

    Article • December 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  78. Patented portable spirometer based on fluid mechanics and low energy consumption to monitor rehabilitation of Covid-19 patients

    Article • Energy Reports, November 2020, Elsevier

    Dr Carlos Raymundo

  79. Lean Thinking Simulation Model to Improve the Service Performance in Fast Food

    Article • October 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  80. Comprehensive Management model for increasing the competitiveness of small and medium artisan jewelry enterprises in Peru

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  81. LEAN Production Management Model based on Organizational Culture to Improve Cutting Process Efficiency in a Textile and Clothing SME in Peru

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  82. LEAN maintenance model based on change management allowing the reduction of delays in the production line of textile SMEs in Peru

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  83. Layout Lean model of production management based on change management to improve efficiency in the production of packaging in auto parts sector SMEs

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  84. Lean Manufacturing Model for production management to increase SME productivity in the non-primary manufacturing sector

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  85. Lean Manufacturing Production Management Model focused on Worker Empowerment aimed at increasing Production Efficiency in the textile sector

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  86. Lean Manufacturing Production Management Model using the Johnson Method Approach to Reduce Delivery Delays for Printing Production Lines in the Digital Graphic Design Industry

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  87. Lean Manufacturing Production Method using the Change Management Approach to Reduce Backorders at SMEs in the Footwear Industry in Peru

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  88. Lean Production Model Aligned with Organizational Culture to Reduce Order Fulfillment Issues in Micro- and Small-sized Textile Businesses in Peru

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  89. Lean production management model under the change management approach to reduce order fulfillment times for Peruvian textile SMEs

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  90. Maintenance Management Model under the TPM approach to Reduce Machine Breakdowns in Peruvian Giant Squid Processing SMEs

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  91. Production Management Model Based on Lean Manufacturing and Change Management Aimed at Reducing Order Fulfillment Times in Micro and Small Wooden Furniture Companies in Peru

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  92. Production management model through MPS and line balancing to reduce the non-fulfillment of orders in lingerie clothing MSEs in Peru

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  93. SCOR Model for a Dual-Channel Supply Chain using Drop Shipping to Reduce Overstock in Small- and Medium-Sized Retail Enterprises

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  94. TPM Maintenance Management Model Focused on Reliability that Enables the Increase of the Availability of Heavy Equipment in the Construction Sector

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  95. Warehouse management model using FEFO, 5s, and chaotic storage to improve product loading times in small- and medium-sized non-metallic mining companies

    Article • IOP Conference Series Materials Science and Engineering, April 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  96. Clamp bending machine and annealed wire cutter for reinforced concrete columns

    Article • IOP Conference Series Materials Science and Engineering, February 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  97. Empirical and Numerical Finite-Element-Based Model to Improve Narrow Vein Mine Design in Peruvian Mining

    Article • IOP Conference Series Materials Science and Engineering, February 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  98. Optimal mesh design methodology considering geometric parameters for rock fragmentation in open-pit mining in the Southern Andes of Peru

    Article • IOP Conference Series Materials Science and Engineering, February 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  99. Optimized Method of Estimating Mineral Reserves Using the O’Hara Mathematical Model for Underground Mining in Peru

    Article • IOP Conference Series Materials Science and Engineering, February 2020, Institute of Physics Publishing

    Dr Carlos Raymundo

  100. Business Architecture Model Adapted to Predictive Analysis for Customer's Increasing of SMEs of Furnitures Industry through Digital Tools

    Article • February 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  101. Digital Transformation Model for the Reduction of Time Taken for Document Management with a Technology Adoption Approach for Construction SMEs

    Article • February 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  102. Digitization Model for Reducing Costs and Operating Times in Peruvian Banks

    Article • February 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  103. Waste Management Model Based on Reverse Logistics and 5S for the Generation of Biomass in the Fresh Fruit Industry

    Article • February 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  104. A Cyanide Tailings Management Method Using Pseudomonas Fluorescens to Improve Conventional Treatments for Progressive Closure at Small Gold Mines

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  105. A Sentiment Analysis Software Framework for the Support of Business Information Architecture in the Tourist Sector

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  106. Adaptive neural-fuzzy and backstepping controller for port-Hamiltonian systems

    Article • International Journal of Computer Applications in Technology, January 2020, Inderscience Publishers

    Dr Carlos Raymundo

  107. Agile Inventory Management Model Under a Digital Transformation Approach for Stockout Reduction in Chemical Industry’s MSE

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  108. Alignment of Management by Processes and Quality Tools and Lean to Reduce Unfilled Orders of Fabrics for Export: A Case Study

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  109. Applying SLP in a Lean Manufacturing Model to Improve Productivity of Furniture SME

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  110. B2B Marketing Method Adapted to Sales Improvement Through the Implementation of ABC Classification Tool and Inbound Marketing in SMEs

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  111. Collaborative Model Based on ARIMA Forecasting for Reducing Inventory Costs at Footwear SMEs

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  112. Comprehensive Strategic Risk Management System to Reduce Evaluation Times in Small-Scale Mining Projects

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  113. Demand Management Model Based on Quantitative Forecasting Methods and Continuous Improvement to Increase Production Planning Efficiencies of SMEs Bakeries

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  114. Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  115. Filling Method Implementing Hydraulic Lime for Reusing Mine Tailings and Improve Sustainability in Conventional Peruvian Underground Mines

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  116. Fundamental Criteria for Methodology of Blasting Engineering in Mining Grains to Reduce Mineral Dilution in Peruvian Polymetallic Underground Mining

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  117. HIRAC-Based Risk Management Model with POKA–YOKE and TPM Continuity to Control and Mitigate Emergency Scenarios in Hydrocarbon Sector Operations

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  118. Hydrabolt and Split Set Rock Bolt Selection Method Under the Bieniawski Rock Mass Rating for Improving Horizontal Access Support in Peruvian Mid-Scale Mining Activities

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  119. Inventory Optimization Model Applying the Holt-Winters Method to Improve Stock Levels in SMEs in the Sports Retail Sector

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  120. Lean Healthcare Model Using Knowledge Management and Change Management Approaches to Reduce Delays for Care in the Health Sector

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  121. Lean Manufacturing Model of Production Management Under the Focus on Maintenance Planned to Improve the Capacity Used in a Plastics Industry SME

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  122. Management Projects Model to Reduce Lead Time of Base Station Telecom Construction in SME Based on Lean Focus and Agility

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  123. Mathematical Model of a Drilling Mesh to Reduce Dilution in the Sublevel Stoping Method in Peru’s Underground Mines

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  124. Method for the Interpretation of RMR Variability Using Gaussian Simulation to Reduce the Uncertainty in Estimations of Geomechanical Models of Underground Mines

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  125. Occupational Health and Safety Management Model for Mining Contracts

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  126. Picking Management Model with a Focus on Change Management to Reduce the Deterioration of Finished Products in Mass Consumption Distribution Centers

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  127. Production Management Model to Balance Assembly Lines Focused on Worker Autonomy to Increase the Efficiency of Garment Manufacturing

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  128. Public Management Model with a Sustainable Development Approach Based on Lean Six Sigma: Formalization of Small-Scale and Artisanal Mining in Peru

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  129. Purchasing and Quality Management Lean Manufacturing Model for the Optimization of Delivery Times in SMEs in the Food Sector

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  130. Quality Management Model Based on Lean Six Sigma for Reducing Returns of Defective Clothing Articles in SMEs from the Clothing Industry

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  131. Recruitment and Training Model for Retaining and Improving the Reputation of Medical Specialists to Increase Revenue of a Private Healthcare SME

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  132. Rural Ecotourism Associative Model to Optimize the Development of the High Andean Tourism Sector in Peru

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  133. SCAT Model Based on Bayesian Networks for Lost-Time Accident Prevention and Rate Reduction in Peruvian Mining Operations

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  134. Safety Management Model with a Behavior-Based Safety Coaching Approach to Reduce Substandard Behaviors in the Mining Sector

    Article • January 2020, Springer Science + Business Media

    Dr Carlos Raymundo

  135. Lean Manufacturing Model of Waste Reduction Using Standardized Work to Reduce the Defect Rate in Textile MSEs

    Article • January 2020, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  136. Modelo Matemático de Pearse y Holmberg para Reducir la Zona de Daños en Labores Horizontales de Minería Subterránea

    Article • January 2020, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  137. Alpaca Waste Management Model for Improving Fiber Productivity Through the use of Biomass in Andean Highland Communities

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Dr Carlos Raymundo

  138. Controlled Trim-Blasting Model to Improve Stability and Reduce Vibrations at a Production Gallery of the San Ignacio de Morococha S.A.A. Mining Company

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Dr Carlos Raymundo

  139. Electromechanical Device for Temperature Control of Internal Combustion Engines

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Dr Carlos Raymundo

  140. Heavy Object Lifting Platform to Correct Human Balance and Posture

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Dr Carlos Raymundo

  141. Ventilation System Simulation Model at a Mine

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Dr Carlos Raymundo

  142. Cloud-based Open-Source Enterprise Content Management Model at a SME operating in the Manufacturing sector

    Article • November 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo

  143. Design of a control and monitoring system to reduce traffic accidents due to drowsiness through image processing

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  144. Design of a hexapod robot using artificial intelligence for the routes of the peruvian andes

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  145. Design of a solar tracker to improve the capture of solar radiation in photovoltaic panels using a closed loop control system

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  146. Design of an unmanned aerial system for the detection of dangerous areas during fires

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  147. Lean Manufacturing model based on the Deming cycle and developed in Gantt to increase efficiency in plastic companies

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  148. Mobile Robot for the Spraying of Corn Crops with autonomous navigation camera for the Plains of the Andes

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  149. Process management model in dry cleaning and fabric finishes applying Lean Manufacturing and Kaizen matrix for the textile sector

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  150. A Cooperative Logistics Management Model Based on Traceability for Reducing the Logistics Costs of Coffee Storage in Peru's Agro-Export Sector

    Article • September 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo, PhD Carlos Raymundo

  151. Inventory Management Model Based on a Stock Control System and a Kraljic Matrix to Reduce Raw Materials Inventory

    Article • September 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo, PhD Carlos Raymundo

  152. Lean Healthcare Model for Increasing the Availability of Products in Pharmaceutical SMEs

    Article • September 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo, PhD Carlos Raymundo, Claudia Leon-Chavarri

  153. Lean Management Model for Waste Reduction in the Production Area of A Food Processing and Preservation SME

    Article • September 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo, PhD Carlos Raymundo

  154. Precision Farming Model to Increase the Production of Exportable Blueberries by Implementing an Adapting-to-Change Approach and Risk Assessment in Agribusinesses in Peru's Coastal Regions

    Article • September 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo, PhD Carlos Raymundo

  155. Process Optimization Using Lean Manufacturing to Reduce Downtime

    Article • September 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo, PhD Carlos Raymundo

  156. Production Management Model under the Knowledge Management Approach to Increase Labor Productivity in the Sewing Area of a Garment Production SME

    Article • September 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo, PhD Carlos Raymundo

  157. An Order Fulfillment Model Based on Lean Supply Chain: Coffee’s Case Study in Cusco, Peru

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  158. Designing a Procurement Management Model to Reduce Project Delays in a Hydraulic and Automation Systems Company

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  159. Model for Improving Post-sales Processes Applying Lean Thinking to Reduce Vehicle Delivery Times at an Automotive Company

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  160. On-Demand Warehousing Model for Open Space Event Development Services: A Case Study in Lima, Peru

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  161. Plant Layout Model for Improving Footwear Process Times in Micro and Small Enterprises

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  162. Production Management Model Based on Lean Manufacturing Focused on the Human Factor to Improve Productivity of Small Businesses in the Metalworking Sector

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  163. Proposal for Process StandarDization for Continuous Improvement in a Peruvian Textile Sector Company

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  164. Quality Management Model Focusing on Good Agricultural Practices to Increase Productivity of Pomegranate Producing SMEs in Peru

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  165. Results-Based Process Management Model Applied to NGOs to Promote Sustainability and Reliability in Social Projects

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  166. Strategic Sourcing Toward a Sustainable Organic Coffee Supply Chain: A Research Applied in Cuzco

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  167. Telecommunications Tower Kits Manufacturing Model Based on Ikea’s Approach to Minimize the Return Due to Missing Parts in a Metalworking Enterprise Kit

    Article • August 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  168. 5S Hybrid Management Model for Increasing Productivity in a Textile Company in Lima

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  169. 6TOC Model for Small Wood Furniture Companies to Increase Machining Productivity in Villa El Salvador Industrial Cluster

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  170. Adoption of Snowball Sampling Technique with Distance Boundaries to Assess the Productivity Issue Faced by Micro and Small Cocoa Producers in Cusco

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  171. Application of a Management Model Based on DMAIC Methodology to an MSE in the Personal Beauty Sector to Increase Profitability

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  172. Application of Lean Manufacturing Techniques to Increase On-Time Deliveries: Case Study of a Metalworking Company with a Make-to-Order Environment in Peru

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  173. Basic Production Planning and Control Model Based on Process Management to Increase the Productivity of Mango MSEs in Casma

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  174. Comprehensive Management Model for Solid Waste Collection and Transportation in Peruvian Urban Municipalities

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  175. Continuous Improvement Model for Inventory Planning Applying MRP II in Small and Medium Sized Enterprises

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  176. Design of a Model of Marketing a Product of Detection and Identification with Technology of Positioning in Interiors Based on RFID

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  177. Implementation of a Quality Management System (QMS) Based on TQM Principles for Cocoa MSEs: A Case Study in Cusco, Perú

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  178. Improvement of Attention Times and Efficiency of Container Movements in a Port Terminal Using a Truck Appointment System, LIFO Management and Poka Yoke

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  179. Improving Processes Through the Use of the 5S Methodology and Menu Engineering to Reduce Production Costs of a MSE in the Hospitality Sector in the Department of Ancash

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  180. Integral Model of Maintenance Management Based on TPM and RCM Principles to Increase Machine Availability in a Manufacturing Company

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  181. Lean Model of Services for the Improvement in the Times of Attention of the Emergency Areas of the Health Sector

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  182. Lean Service Quality Model to Improve the Performance of Service in Automotive Dealer

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  183. Management Model Based on the Lean Thinking Method for Medium-Sized Peruvian Companies in the Apparel Sector

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  184. Management Model for Pecan Production Using Process Tools in an MSE in Peru

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  185. Project Planning Methodology Based on Lean Philosophy and PMBOK Guidelines for SMEs in the Electricity Sector

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  186. Quality Management Model for a Small Enterprise of Pecan Farmers in Ica el Valle - Peru

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  187. Strategic Planning Model to Increase the Profitability of an HR Outsourcing SME Through Digital Transformation

    Article • July 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  188. Business information architecture for successful project implementation based on sentiment analysis in the tourist sector

    Article • Journal of Intelligent Information Systems, June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  189. Service Model Based on Information Technology Outsourcing for the Reduction of Unfulfilled Orders in an SME of the Peruvian IT Sector

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  190. Lean Manufacturing Model for the Reduction of Production Times and Reduction of the Returns of Defective Items in Textile Industry

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  191. Lean Manufacturing Model in a Make to Order Environment in the Printing Sector in Peru

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  192. Lean Production Management Model for SME Waste Reduction in the Processed Food Sector in Peru

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  193. Management Model Logistic for the Use of Planning and Inventory Tools in a Selling Company of the Automotive Sector in Peru

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  194. Model for Dilution Control Applying Empirical Methods in Narrow Vein Mine Deposits in Peru

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  195. Model for Monitoring Socioenvironmental Conflicts in Relation to the Emission of Particulate Matter in the Prehauling Phase of a Surface Mine in Peru

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  196. Production Management Model Based on Lean Manufacturing for Cost Reduction in the Timber Sector in Peru

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  197. Production Management Model for Increasing Productivity in Bakery SMEs in Peru

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  198. Six Sigma-Based Optimization Model in Hauling Cut and Fill Exploitation Activities to Reduce Downtime in Underground Mines in Peru

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  199. Knowledge Management Model to Support a Supply Chain for Timely Order Delivery in a Telecommunications Equipment Marketing Company

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  200. Lean Manufacturing Model Based on Knowledge Management to Increase Compliance in the Production Process in Peruvian SMEs in the Textile Garment Sector

    Article • June 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  201. Data Governance Reference Model under the Lean Methodology for the Implementation of Successful Initiatives in the Peruvian Microfinance Sector

    Article • April 2019, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo, PhD Carlos Raymundo

  202. Decision Tree Model to Support the Successful Selection of a Database Engine for Novice Database Administrators

    Article • March 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  203. E-Government Adoption Model Extended with Public Value in Peru

    Article • March 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  204. Reference Model with a Lean Approach of Master Data Management in the Peruvian Microfinance Sector

    Article • March 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  205. Sales and Operation Planning Model to Improve Inventory Management in Peruvian SMEs

    Article • March 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  206. Adaptation of the Raise Borer Elaboration Method to a Short Ore Pass by Evaluating Its Efficiency

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  207. Application of PMBOK to Improve the Deadline of Projects in SMEs Engineering Consultancies

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  208. Development of a Hybrid Heating System Based on Geothermal–Photovoltaic Energy to Reduce the Impact of Frosts on Inhabitants of Rural Areas in the Ring of Fire, Southern Peru

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  209. Energy Model Based on Fluvial Rainfall for the Rural Population with Torrential Rain

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  210. Implementación de un modelo de gestión por procesos y control de inventarios para incrementar el nivel de servicio en el área de postventa de equipos industriales

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  211. Improvement Proposal for the Logistics Process of Importing SMEs in Peru Through Lean, Inventories, and Change Management

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  212. Sistema integrado de inventarios por pronósticos basado en la gestión del conocimiento para la disminución de los quiebres de stock en una PYME distribuidora

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  213. Modelo de gestión de producción lean manufacturing para incrementar la eficiencia del proceso productivo de una empresa MYPE del sector químico

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  214. Modelo lean de servicio para incrementar la capacidad de atención de un taller automotriz

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  215. Modelo de Gestión de mantenimiento basado en Lean Manufacturing para incrementar la productividad de una empresa del sector de Plástico

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  216. Methodology for Reducing Staff Turnover in Service Companies Based on Employer Branding and Talent Management

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  217. Modelo de medición del rendimiento operacional basado en la gestión del conocimiento para reducir pedidos devueltos para una empresa distribuidora

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  218. Optimized Ventilation Model to Improve Operations in Polymetallic Mines in Peru

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  219. Optimized plant distribution and 5S model that allows SMEs to increase productivity in textiles

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  220. Propuesta de un modelo de nivel de madurez adaptado a la realidad de las MYPES del perú

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  221. Propuesta de optimización del flujo de preparación y entrega de vehículos a los concesionarios basado en la metodología Lean

    Article • January 2019, LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)

    Dr Carlos Raymundo

  222. Reuse Method for Deposits of Polymetallic Tailings in a State of Abandonment Through the Application of Mineral Flotation

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  223. Six Sigma Model Optimized for Reducing Downtime in an Open-Pit Mine

    Article • January 2019, Springer Science + Business Media

    Dr Carlos Raymundo

  224. Maturity Model for Long-Distance Passenger Land Peruvian Transport Companies

    Article • November 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  225. Openings Design Method to Mitigate Rock Bursts During Deep Mining Works in the Peruvian Andes

    Article • November 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  226. Socio-Environmental Risk Assessment Model in Peruvian Junior Mining Exploration Projects

    Article • November 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  227. Viability Analysis Method Based on the Mineral Prices for the Exploitation of Peruvian Mineral Resources

    Article • November 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  228. Collaborative Culture Management Model to Improve the Performence in the Inventory Management of a Supply Chain

    Article • October 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  229. Lean Optimization Model for Managing the Yield of Pima Cotton (Gossypium Barbadense) in Small-and Medium-Sized Farms in the Peruvian Coast

    Article • October 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  230. Solar Energy Management Model for Rural Schools Without Access to the National Interconnected Power System in Peruvian Mountains

    Article • October 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  231. Full-fledged semantic indexing and querying model designed for seamless integration in legacy RDBMS

    Article • Data & Knowledge Engineering, September 2018, Elsevier

    Dr Carlos Raymundo, Prof. Richard Chbeir

  232. Upgraded SemIndex Prototype Supporting Intelligent Database Keyword Queries through Disambiguation, Query as You Type, and Parallel Search Algorithms

    Article • July 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo, Prof. Richard Chbeir

  233. A hybrid energy system based on renewable energy for the electrification of low-income rural communities

    Article • IOP Conference Series Earth and Environmental Science, June 2018, Institute of Physics Publishing

    Dr Carlos Raymundo

  234. Personal data protection maturity model for the micro financial sector in Peru

    Article • May 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  235. Master Data Management Maturity Model for the Microfinance Sector in Peru

    Article • January 2018, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo

  236. Sustainable Energy Model for the production of biomass briquettes based on rice husk in low-income agricultural areas in Peru.

    Article • Energy Procedia, December 2017, Elsevier

    Dr Carlos Raymundo

  237. Information Architecture Model for Data Governance Initiatives in Peruvian Universities

    Article • November 2017, ACM (Association for Computing Machinery)

    Dr Carlos Raymundo

  238. Information architecture model for the successful data governance initiative in the peruvian higher education sector

    Article • August 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo

  239. MMDES: Multimedia Digital Ecosystem - New Platform for Collaboration and Sharing

    Article • August 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Carlos Raymundo, Prof. Richard Chbeir

  240. SemIndex: Semantic-Aware Inverted Index

    Article • January 2014, Springer Science + Business Media

    Dr Carlos Raymundo