All Stories

  1. Machine Learning Classification of Axillary Lymph Nodes Using Microwave Signals
  2. Fast Synthesis of Breast Monostatic Microwave Response for Massive Dataset Generation
  3. Co-design of Low-Profile Leaky-Wave-Fed Transmit-Array Antennas Using the Generalized Risley Prism Concept for Side-Lobe Reduction
  4. Identifying optimal microwave frequencies to detect floating macroplastic litter using machine learning
  5. Compact Beam-Scanning Reflectarray Antenna with SLL Reduction Using In-Plane Panel Translations
  6. Assessing the detection of floating plastic litter with advanced remote sensing technologies in a hydrodynamic test facility
  7. Microwave Breast Imaging for Cancer Diagnosis: An overview [Bioelectromagnetics]
  8. Feasibility of Radar-Based Detection of Floating Macroplastics at Microwave Frequencies
  9. Generalized Risley Prism for Beam-Steering Transmit Arrays With Reduced Grating Lobes
  10. Experimental Assessment of Axillary Lymph Node Microwave Tomography Using Anthropomorphic Phantoms
  11. Design of Low-Profile Transmitarray Antennas With Wide Mechanical Beam Steering at Millimeter Waves
  12. Effects of Fire Plumes From Pine Needles on Small-Scale Fading in Radiowave Propagation
  13. Measurement Trials and Modeling of Radio Propagation Through Small-Scale Fire Using Pinus pinaster Fuel Bed
  14. Validation of a Compact Microwave Imaging System for Bone Fracture Detection
  15. Modelling level I Axillary Lymph Nodes depth for Microwave Imaging
  16. Target Selection in Multistatic Microwave Breast Imaging Setup Using Dielectric Lens
  17. Experimental Evaluation of an Axillary Microwave Imaging System to Aid Breast Cancer Staging
  18. ISTSat‐1, a space‐based Automatic Dependent Surveillance‐Broadcast demonstration CubeSat mission
  19. Feasibility of Bone Fracture Detection Using Microwave Imaging
  20. Study of Freezing and Defrosting Effects on Complex Permittivity of Biological Tissues
  21. Development of MRI‐based axillary numerical models and estimation of axillary lymph node dielectric properties for microwave imaging
  22. Evaluation of Refraction Effects in Dry Medical Microwave Imaging Setups
  23. Evaluation of a Dielectric-Only Transmitarray for Generating Multi-Focusing Near-Field Spots Using a Cluster of Feeds in the Ka-Band
  24. Development of an Anthropomorphic Phantom of the Axillary Region for Microwave Imaging Assessment
  25. Comparative Study of Computational Electromagnetics Applied to Radiowave Propagation in Wildfires
  26. Equivalent Circuit Modeling to Design a Dual-Band Dual Linear-to-Circular Polarizer Surface
  27. Study of the Refraction Effects in Microwave Breast Imaging Using a Dry Setup
  28. Radiowave Propagation Modelling in the Presence of Wildfires: Initial Results
  29. 3D-Printed transmit-array antenna for broadband backhaul 5G links at V band
  30. Applying Massively Parallel Computing to Multiscale Ka Dual-Band Transmit-Array Analysis Using FETI-2LM
  31. Bessel Beam Generation Using Dielectric Planar Lenses at Millimeter Frequencies
  32. Microwave Breast Imaging Using a Dry Setup
  33. Efficient Evaluation of Gradient Transmit-Arrays Through an Equivalent Dispersive Dielectric Description
  34. Antenna Design and Near-Field Characterization for Medical Microwave Imaging Applications
  35. Multiple-Beam Focal-Plane Dual-Band Fabry–Pérot Cavity Antenna With Reduced Beam Degradation
  36. Dual-Band Dual-Linear-to-Circular Polarization Converter in Transmission Mode Application to <inline-formula> <tex-math notation="LaTeX">$K/Ka$ </tex-math> </inline-formula>-Band Satellite...
  37. Synthesis of Shaped-Beam Radiation Patterns at Millimeter-Waves Using Transmit Arrays
  38. Dual-Band Skin-Adhesive Repeater Antenna for Continuous Body Signals Monitoring
  39. Experimental verification of ‘waveguide’ plasmonics
  40. Ball Grid Array Module With Integrated Shaped Lens for 5G Backhaul/Fronthaul Communications in F-Band
  41. 3D-Printed ABS plastic Peanut-Lens with Integrated Ball Grid Array-Module for High-Data Rate Communications in F-band
  42. Integrated Lens Antennas
  43. Low-cost plastic lens fabricated in FDM 3D-printing technology targeting high data rate wireless links above 200 GHz
  44. High Gain Dual-Band Beam-Steering Transmit Array for Satcom Terminals at Ka-Band
  45. Antenna-filter-antenna-based cell for linear-to-circular polarizer transmit-array
  46. Low-cost 3D-printed 240 GHz plastic lens fed by integrated antenna in organic substrate targeting sub-THz high data rate wireless links
  47. Low-cost 60 GHz 3D printed lens fed by a planar source with WR15 transition integrated on FR4 PCB
  48. Miniaturized implantable patch antenna for near-field communication at ISM band
  49. Transmit array as a viable 3D printing option for backhaul applications at V-band
  50. Stereolithography-Based Antennas for Satellite Communications in Ka-Band
  51. Generic formulation for transmit-array dual-band unit-cell design
  52. Link budget study and realization of time-domain measurement setup for implantable antennas
  53. 17.8 A compact 130GHz fully packaged point-to-point wireless system with 3D-printed 26dBi lens antenna achieving 12.5Gb/s at 1.55pJ/b/m
  54. Focal-Plane Multibeam Dual-Band Dielectric Lens for Ka-Band
  55. Wideband and High-Selectivity Dual-Band Filter for Ka-Band Satellite Antennas
  56. Phase Delay vs Phase Rotation Cells for Circular Polarization Transmit-Arrays — Application to Satellite Ka-Band Beam Steering
  57. Comparing liquid homogeneous and multilayer phantoms for human body implantable antennas
  58. Prototype of a compact mechanically steered Ka-band antenna for satellite on-the-move
  59. Wideband Implantable Antenna for Body-Area High Data Rate Impulse Radio Communication
  60. Design of a 40 dBi planar bifocal lens for mechanical beam steering at Ka-band
  61. Low-profile wideband stick-on antenna for body-area communication
  62. Ball Grid Array-Module With Integrated Shaped Lens for WiGig Applications in Eyewear Devices
  63. 3D printing technology: Enabling innovative & cost effective industrial antenna solution
  64. Dielectric Lens Antennas
  65. Noncollimating MMW Polyethylene Lens Mitigating Dual-Source Offset From a Tx/Rx WiGig Module
  66. Circular Polarization Wide-Angle Beam Steering at Ka-Band by In-Plane Translation of a Plate Lens Antenna
  67. A planar feed for SOTM Ka-band lens antennas
  68. Influence of body placement on low profile UWB antenna off-body ranging performance
  69. RFID-based Smart Blood Stock System [Education Column]
  70. Millimeter-wave antenna-in-package solutions for WiGig and backhaul applications
  71. Review of 20 Years of Research on Microwave and Millimeter-wave Lenses at "Instituto de Telecomunicaço˜es"
  72. Tx-Rx Lens-Based Satellite-on-the-Move Ka-Band Antenna
  73. Reversed rainbow with a nonlocal metamaterial
  74. Design and Ranging Performance of a Low-profile UWB Antenna for WBAN Localization Applications
  75. A 120 GHz 3D-printed plastic elliptical lens antenna with an IPD patch antenna source
  76. Comparizon of 3D printed Plastic and micromachined Teflon Lenses for WiGig modules
  77. Design of a UWB stacked antenna for body area network applications
  78. A Broadband Implantable and a Dual-Band On-Body Repeater Antenna: Design and Transmission Performance
  79. 3D printed plastic 60 GHz lens: Enabling innovative millimeter wave antenna solution and system
  80. A Graphical Aid for the Complex Permittivity Measurement at Microwave and Millimeter Wavelengths
  81. RFID chip characterization through S-parameter measurements and gene expression programming
  82. Antenna for real-time tracking of suitcases
  83. Design and analysis of a Ka-band coaxial-to-quad-ridged circular waveguide transition
  84. FSS design for dual-band and low profile Fabry-Pérot antenna at Ka-band
  85. Low profile UWB antenna for Wireless Body Area Networks
  86. Spatially Confined UHF RFID Detection With a Metamaterial Grid
  87. UWB Real Time Localization platform for fast system performance evaluation
  88. Guest Editorial for the Special Issue on Antennas and Propagation at mm- and Sub mm-Waves
  89. DUAL-BAND IMPLANTABLE ANTENNAS FOR MEDICAL TELEMETRY: A FAST DESIGN METHODOLOGY AND VALIDATION FOR INTRA-CRANIAL PRESSURE MONITORING
  90. Broadband UHF RFID Passive Tag Antenna for Near-Body Applications
  91. Hybrid UHF/UWB Antenna for Passive Indoor Identification and Localization Systems
  92. Miniature Implantable Antennas for Biomedical Telemetry: From Simulation to Realization
  93. Broadband UHF RFID passive tag antenna for near-body operation
  94. Feasibility study of suitcase identification and imaging Using a UWB tag
  95. Special Issue: Antennaes and Propagation at mm- and sub mm-waves
  96. Design of a passive tag for indoor localization
  97. Ku-band dielectric-loaded SIW horn for vertically-polarized multi-sector antennas
  98. Impact of a new wideband slot array on MIMO indoor system performance
  99. UHF RFID cabinet
  100. Resolving subwavelength objects with a crossed wire mesh superlens operated in backscattering mode
  101. RFID Reader Antennas for Tag Detection in Self-Confined Volumes at UHF
  102. Evaluation of a New Wideband Slot Array for MIMO Performance Enhancement in Indoor WLANs
  103. Tapered waveguide feed for integrated dielectric lens antenna performance tests
  104. Passive UHF RFID Tag for Airport Suitcase Tracking and Identification
  105. Mirror-Integrated Transparent Antenna for RFID Application
  106. Broadband Integrated Lens for Illuminating Reflector Antenna With Constant Aperture Efficiency
  107. Antenna phase center determination from amplitude measurements using a focusing lens
  108. Broadband reflector fed by integrated lens antenna with frequency constant directivity
  109. Passive UHF RFID smart polling device
  110. Development of an indoor Wireless Personal Area Network based on mechanically steered millimeter-wave lens antenna
  111. Broadband superlensing using a metamaterial with an extreme index of refraction: Salient features, physical principles and analytical modeling
  112. Low-cost mechanically steered millimeter-wave lens antenna system for indoor LANs
  113. Experimental verification of broadband superlensing using a metamaterial with an extreme index of refraction
  114. Wideband Slot Antenna for WLAN Access Points
  115. Compact Beam-Steerable Lens Antenna for 60-GHz Wireless Communications
  116. Design of double material integrated scanning lens antennas
  117. Optimization of mechanically beam-steerable lens antenna profile for 60GHz wireless communications
  118. UHF RFID smart conveyor belt with confined detection range
  119. UWB crossed exponentially tapered slot antenna with WLAN band rejection
  120. Performance of a Crossed Exponentially Tapered Slot Antenna for UWB Systems
  121. Compact Tapered Slot UWB Antenna With WLAN Band Rejection
  122. Superlens made of a metamaterial with extreme effective parameters
  123. Experimental demonstration of a structured material with extreme effective parameters at microwaves
  124. Nonresonant structured material with extreme effective parameters
  125. Crossed exponentially tapered slot antenna for UWB applications
  126. ILASH - Software tool for the design of integrated lens antennas
  127. MEMS reconfigurable stacked antenna for WLAN applications
  128. Additional boundary condition for a wire medium connected to a metallic surface
  129. Compact Ka-Band Lens Antennas for LEO Satellites
  130. RFID Smart Shelf With Confined Detection Volume at UHF
  131. Evaluation of a Double-Shell Integrated Scanning Lens Antenna
  132. Electromagnetic Characterization of Textured Surfaces Formed by Metallic Pins
  133. Estimation of Exclusion Zones for Base Station Antennas in Wireless Communications Systems
  134. Design of a shaped double-shell lens feed for a quasi-optical reflector system
  135. Realization of low profile high-impedance surfaces using an array of densely packed crossed metallic wires
  136. Transverse-average field approach for the characterization of thin metamaterial slabs
  137. The moniT Project: Electromagnetic Radiation Exposure Assessment in Mobile Communications
  138. Broadband Slot Feed for Integrated Lens Antennas
  139. Integrated imaging lens antenna with broadband feeds
  140. Computation of the Electromagnetic Modes in Two-Dimensional Photonic Crystals: A Technique to Improve the Convergence Rate of the Plane Wave Method
  141. Review of lens antenna design and technologies for mm-wave shaped-beam applications
  142. Homogenization of 3-D-connected and nonconnected wire metamaterials
  143. A new acceleration technique with exponential convergence rate to evaluate periodic Green functions
  144. Homogenization of metamaterial surfaces and slabs: the crossed wire mesh canonical problem
  145. A Hybrid Method for the Efficient Calculation of the Band Structure of 3-D Metallic Crystals
  146. Calculation of the near-field from axial symmetric apertures using Gaussian-like discretization of the aperture field
  147. Effective permittivity of a medium with stratified dielectric host and metallic inclusions
  148. Is the 3D-wire medium isotropic?
  149. Efficient calculation of the band structure of artificial materials with cylindrical metallic inclusions
  150. Effective Permittivity of Metallic Crystals: A Periodic Green's Function Formulation
  151. Constant flux illumination of square cells for millimeter-wave wireless communications
  152. Performance of lens antennas in wireless indoor millimeter-wave applications
  153. Shaped dielectric lenses for wireless millimeter-wave communications
  154. A method to overcome the limitations of G.O. in axis-symmetric dielectric lens shaping
  155. Scalar network analysis using a PC and a standard microwave lab bench
  156. Double-shell axial-symmetric imaging lens antenna for space applications
  157. Constant flux illumination of square cells for MM-wave wireless communications