All Stories

  1. Protein interactions with osseointegrable titanium implants

    Article • Brazilian Journal of Oral Sciences, October 2023, Universidade Estadual de Campinas - Repositorio Institucional

    Carlos Nelson Elias

  2. 3Y-TZP electrostatic painting to increase bond strength to dentin and dental prostheses

    Article • Journal of Materials Research and Technology, September 2023, Elsevier

    Carlos Nelson Elias

  3. Correction to: Comparative Study of Alloplastic and Xenogeneic Biomaterials Used for in Dentistry

    Article • Biomedical Materials & Devices, July 2023, Springer Science + Business Media

    Carlos Nelson Elias

  4. Functionalization of titanium dental prostheses surface with antimicrobials GO and Cu2O

    Article • Journal of Materials Research and Technology, July 2023, Elsevier

    Carlos Nelson Elias

  5. Comparative Study of Alloplastic and Xenogeneic Biomaterials Used for in Dentistry

    Article • Biomedical Materials & Devices, May 2023, Springer Science + Business Media

    Carlos Nelson Elias

  6. Analysis of bone stress and primary stability of a dental implant using strain and torque measurements

    Article • The Saudi Dental Journal, March 2023, Elsevier

    Carlos Nelson Elias

  7. Titanium Coated with Graphene and Niobium Pentoxide for Biomaterial Applications

    Article • International Journal of Biomaterials, November 2022, Hindawi Publishing Corporation

    Carlos Nelson Elias

  8. Surface morphology, roughness, and corrosion resistance of dental implants produced by additive manufacturing

    Article • Journal of Materials Research and Technology, November 2022, Elsevier

    Carlos Nelson Elias

  9. A Lip Repositioning Technique Using Polyester Threads for Gummy Smile Treatment

    Article • International Journal of Dentistry, October 2022, Hindawi Publishing Corporation

    Carlos Nelson Elias

  10. Influence of Heat Treatment of Nickel–Titanium Instruments on Cyclic Fatigue Resistance in Simulated Curved Canals

    Article • European Journal of Dentistry, October 2022, Thieme Publishing Group

    Carlos Nelson Elias

  11. Effect of heat treatment on the roughness and mechanical properties of dental lithium disilicate glass-ceramics

    Article • Ceramics International, September 2022, Elsevier

    Carlos Nelson Elias

  12. Study of synthesis parameters on the physical properties and morphology of smart PNIPAAm hydrogels

    Article • Materials Science-Poland, August 2022, De Gruyter

    Carlos Nelson Elias

  13. Comparison between different fracture toughness techniques in zirconia dental ceramics

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, July 2022, Wiley

    Carlos Nelson Elias

  14. Physical Properties and Color Stainability by Coffee and Red Wine of Opaque and High Translucency Zirconia Dental Ceramics after Hydrothermal Degradation

    Article • International Journal of Biomaterials, May 2022, Hindawi Publishing Corporation

    Carlos Nelson Elias

  15. Flexural Strength of Vitreous Ceramics Based on Lithium Disilicate and Lithium Silicate Reinforced with Zirconia for CAD/CAM

    Article • International Journal of Biomaterials, February 2022, Hindawi Publishing Corporation

    Carlos Nelson Elias

  16. Effect of preheating and isothermal holding time on the crystallization, densification and properties of a sintered lithium silicate glass-ceramic

    Article • Ceramics International, February 2022, Elsevier

    Carlos Nelson Elias

  17. Assessment of frictional resistance and surface roughness in orthodontic wires coated with two different nanoparticles

    Article • Microscopy Research and Technique, January 2022, Wiley

    Carlos Nelson Elias

  18. Surface Characteristics and Microbiological Analysis of a Vat-Photopolymerization Additive-Manufacturing Dental Resin

    Article • Materials, January 2022, MDPI AG

    Carlos Nelson Elias

  19. Effect of cigarette smoke on aesthetic brackets: an in vitro study

    Article • Dental Press Journal of Orthodontics, January 2022, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  20. Comparison of feldspathic veneer surface treatments on ceramic bracket SBS, ARI and surface roughness after different debonding/polishing methods: An in vitro study

    Article • International Orthodontics, December 2021, Elsevier

    Carlos Nelson Elias

  21. Ultrastructural and Physicochemical Characterization of a Non-Crosslinked Type 1 Bovine Derived Collagen Membrane

    Article • Polymers, November 2021, MDPI AG

    Carlos Nelson Elias

  22. In vitro analysis of prosthetic abutment and angulable frictional implant interface adaptation: Mechanical and microbiological study

    Article • Journal of Biomechanics, November 2021, Elsevier

    Carlos Nelson Elias

  23. Galvanic Corrosion of Ti Dental Implants Coupled to CoCrMo Prosthetic Component

    Article • International Journal of Biomaterials, October 2021, Hindawi Publishing Corporation

    Carlos Nelson Elias

  24. Performance of Nano-Hydroxyapatite/Beta-Tricalcium Phosphate and Xenogenic Hydroxyapatite on Bone Regeneration in Rat Calvarial Defects: Histomorphometric, Immunohistochemical and Ultrastructural Analysis

    Article • International Journal of Nanomedicine, May 2021, Taylor & Francis

    Carlos Nelson Elias

  25. Effect of sintering process on microstructure, 4-point flexural strength, and grain size of yttria-stabilized tetragonal zirconia polycrystal for use in monolithic dental restorations

    Article • Journal of Prosthetic Dentistry, May 2021, Elsevier

    Carlos Nelson Elias

  26. Properties of a bovine collagen type I membrane for guided bone regeneration applications

    Article • e-Polymers, January 2021, De Gruyter

    Carlos Nelson Elias

  27. Comparison of Surface Treatments of Endosteal Implants in Ovariectomized Rabbits

    Article • The International Journal of Oral & Maxillofacial Implants, January 2021, Quintessence Publishing

    Carlos Nelson Elias

  28. Miniscrew-assisted rapid palatal expansion (MARPE): how to achieve greater stability. In vitro study

    Article • Dental Press Journal of Orthodontics, January 2021, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  29. Nanometric Deposition of Fluoride Ions on Titanium Alloys and its Influence on In Vitro Bacterial Adhesion and Viability

    Article • Materials Research, January 2021, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  30. Shear Bond Strength of Lithium Disilicate to Resin Cement After Treatment with Hydrofluoric Acid and a Self-etching Ceramic Primer

    Article • Materials Research, January 2021, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  31. Performance of cementitious matrices incorporating concrete floor polishing sludge waste

    Article • Construction and Building Materials, December 2020, Elsevier

    Carlos Nelson Elias

  32. Comparison of the wettability and corrosion resistance of two biomedical Ti alloys free of toxic elements with those of the commercial ASTM F136 (Ti–6Al–4V) alloy

    Article • Journal of Materials Research and Technology, November 2020, Elsevier

    Carlos Nelson Elias

  33. Adhesion of ceramic tile coating system on concrete block wall

    Article • Construction and Building Materials, May 2020, Elsevier

    Carlos Nelson Elias

  34. Effect of focal adhesion kinase inhibition on osteoblastic cells grown on titanium with different topographies

    Article • Journal of Applied Oral Science, January 2020, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  35. Influence of heat treatment on color and flexibility of nickel-titanium endodontic instruments

    Article • RGO - Revista Gaúcha de Odontologia, January 2020, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  36. Relação entre os parâmetros de rugosidade 3D e a molhabilidade do titânio com grãos micrométricos e sub-micrométricos

    Article • Matéria (Rio de Janeiro), January 2020, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  37. Nanosized hydroxyapatite and β-tricalcium phosphate composite: Physico-chemical, cytotoxicity, morphological properties and in vivo trial

    Article • Scientific Reports, December 2019, Springer Science + Business Media

    Carlos Nelson Elias

  38. Biocompatibility of bioabsorbable Mg–Ca alloys with rare earth elements addition

    Article • Journal of Materials Science Materials in Medicine, December 2019, Springer Science + Business Media

    Carlos Nelson Elias

  39. Viability and collagen secretion by fibroblasts on titanium surfaces with different acid-etching protocols

    Article • International Journal of Implant Dentistry, November 2019, Springer Science + Business Media

    Carlos Nelson Elias

  40. Modeling of the Influence of Chemical Composition, Sintering Temperature, Density, and Thickness in the Light Transmittance of Four Zirconia Dental Prostheses

    Article • Materials, August 2019, MDPI AG

    Carlos Nelson Elias

  41. Influence of heat treatment on torsional resistance and surface roughness of nickel‐titanium instruments

    Article • International Endodontic Journal, June 2019, Wiley

    Carlos Nelson Elias

  42. Evaluation of the Effect of Air Polishing With Different Abrasive Powders on the Roughness of Implant Abutment Surface: An In Vitro Study

    Article • Journal of Oral Implantology, June 2019, American Academy of Implant Dentistry

    Carlos Nelson Elias

  43. Influence of CAD-CAM milling on the flexural strength of Y-TZP dental ceramics

    Article • Ceramics International, June 2019, Elsevier

    Carlos Nelson Elias

  44. Oral degradation of Y-TZP ceramics

    Article • Ceramics International, June 2019, Elsevier

    Carlos Nelson Elias

  45. A novel hybrid nanoparticle based on Fe3O4/TMAOH/poly(L-co-D,L lactic acid-co-trimethylene carbonate) prepared through the solvent displacement method

    Article • Hyperfine Interactions, March 2019, Springer Science + Business Media

    Carlos Nelson Elias

  46. Participation of integrin β3 in osteoblast differentiation induced by titanium with nano or microtopography

    Article • Journal of Biomedical Materials Research Part A, February 2019, Wiley

    Carlos Nelson Elias

  47. Influence of oral pH Environment in the Corrosion Resistance of Cr-Co-Mo alloy Used for Dentistry Prosthetic Components

    Article • Materials Research, January 2019, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  48. Influência do método de limpeza da zircônia na adesão da prótese após a contaminação com saliva

    Article • Revista de Odontologia da UNESP, January 2019, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  49. Mechanical and clinical properties of titanium and titanium-based alloys (Ti G2, Ti G4 cold worked nanostructured and Ti G5) for biomedical applications

    Article • Journal of Materials Research and Technology, January 2019, Elsevier

    Carlos Nelson Elias

  50. Development of a novel nano-biomaterial for biomedical applications

    Article • Materials Research Express, September 2018, Institute of Physics Publishing

    Carlos Nelson Elias

  51. Apicoectomy and Scanning Electron Microscopy Analysis of an Implant Infected by Apical (Retrograde) Peri-implantitis: A Case Letter

    Article • Journal of Oral Implantology, August 2018, American Academy of Implant Dentistry

    Carlos Nelson Elias

  52. Fatigue resistance of endodontic instruments manufactured in NiTi CM Wire and in conventional NiTi alloy with eletrochemical treatment

    Article • RGO - Revista Gaúcha de Odontologia, June 2018, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  53. Torsional Fatigue Resistance of Blue-treated Reciprocating Instruments

    Article • Journal of Endodontics, June 2018, Elsevier

    Carlos Nelson Elias

  54. Creep Fracture Mechanisms and Maps in Aisi Type 316 Austenitic Stainless Steels from Distinct Origins

    Article • Materials Research, March 2018, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  55. Cyclic and Torsional Fatigue Resistance of XP-endo Shaper and TRUShape Instruments

    Article • Journal of Endodontics, January 2018, Elsevier

    Carlos Nelson Elias

  56. Effects of different primers on indirect orthodontic bonding: Shear bond strength, color change, and enamel roughness

    Article • The Korean Journal of Orthodontics, January 2018, Korean Association of Orthodontists (KAMJE)

    Carlos Nelson Elias

  57. Physico-chemical and Biological Properties of a New Portland Cement-based Root Repair Material

    Article • European Endodontic Journal, December 2017, Kare Publishing

    Carlos Nelson Elias

  58. Extensiometric analysis of strain in craniofacial bones during implant-supported palatal expansion

    Article • Journal of the Mechanical Behavior of Biomedical Materials, December 2017, Elsevier

    Carlos Nelson Elias

  59. Propiedades fisicoquimicas de hot-dog de carne de llama con inclusión de albúmina, goma de tara y proteína de soya - CIIA 2017

    Article • Revista de Investigaciones Altoandinas - Journal of High Andean Research, October 2017, Universidad Nacional Del Altiplano Puno Peru

    Carlos Nelson Elias

  60. Influence of acid treatment on surface properties and in vivo performance of Ti6Al4V alloy for biomedical applications

    Article • Journal of Materials Science Materials in Medicine, September 2017, Springer Science + Business Media

    Carlos Nelson Elias

  61. Electrochemical sensor based on reduced graphene oxide/carbon black/chitosan composite for the simultaneous determination of dopamine and paracetamol concentrations in urine samples

    Article • Journal of Electroanalytical Chemistry, August 2017, Elsevier

    Carlos Nelson Elias

  62. Fracture strength of orthodontic mini-implants

    Article • Dental Press Journal of Orthodontics, June 2017, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  63. Mechanical characteristics of counterfeit Reciproc instruments: a call for attention

    Article • International Endodontic Journal, May 2017, Wiley

    Carlos Nelson Elias

  64. Primary Stability of Temporary Screws after Dentary and Orthopedic Forces under Static and Dynamic Load Cycles

    Article • Metals, March 2017, MDPI AG

    Carlos Nelson Elias

  65. Blue Thermomechanical Treatment Optimizes Fatigue Resistance and Flexibility of the Reciproc Files

    Article • Journal of Endodontics, March 2017, Elsevier

    Carlos Nelson Elias

  66. Using torsion to manipulate spin currents

    Article • EPL (Europhysics Letters), February 2017, Institute of Physics Publishing

    Carlos Nelson Elias

  67. Efeito da adição de Fe2O3 nas propriedades da zircônia estabilizada com ítria

    Article • Matéria (Rio de Janeiro), January 2017, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  68. Study of Mobility and Environmental Contamination by Chromium from Tannery Industry in two Streams in the Town of Dobrada in the State of São Paulo, Brazil

    Article • Revista Virtual de Química, January 2017, Sociedade Brasileira de Quimica (SBQ)

    Carlos Nelson Elias

  69. Development of 70/30 Poly-l-dl-Lactic Acid Filaments for 3D Printers (Part 1): Filament Manufacturing and Characterization of Printed Samples for Use as Bioabsorbable Products

    Article • JOM, November 2016, Springer Science + Business Media

    Carlos Nelson Elias

  70. Development of 70/30 Poly-L-DL-Lactic Acid Filaments for 3D Printers (Part 2): Mechanical and Surface Properties of Bioabsorbable Printed Plates for Biomedical Applications

    Article • JOM, October 2016, Springer Science + Business Media

    Carlos Nelson Elias

  71. nanostructured titanium

    Article • Fatigue & Fracture of Engineering Materials & Structures, October 2016, Wiley

    Carlos Nelson Elias

  72. Surface analysis of 2 orthodontic mini-implants after clinical use

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, July 2016, Elsevier

    Carlos Nelson Elias

  73. Mechanical Strength and Surface Roughness of Magnesium-Based Metallic Glasses

    Article • JOM, June 2016, Springer Science + Business Media

    Carlos Nelson Elias

  74. Influence of Surface Roughness on the Fatigue Life of Nickel-Titanium Rotary Endodontic Instruments

    Article • Journal of Endodontics, June 2016, Elsevier

    Carlos Nelson Elias

  75. Análise da superfície e osseointegração de implantes dentários com superfícies biomiméticas contedo Ca, Mg e F

    Article • Matéria (Rio de Janeiro), March 2016, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  76. In vitro analysis of the microbiological sealing of tapered implants after mechanical cycling

    Article • Clinical Oral Investigations, February 2016, Springer Science + Business Media

    Carlos Nelson Elias

  77. Evaluation of friction produced by self-ligating, conventional and Barbosa Versatile brackets

    Article • Revista de Odontologia da UNESP, January 2016, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  78. Avaliação das propriedades físico-químicas e mecânicas de instrumentos endodônticos de NiTi convencional e com memória controlada

    Article • January 2016, Dental Press International

    Carlos Nelson Elias

  79. Mechanical Performance of Nickel-titanium Archwires

    Article • Materials Research, November 2015, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  80. Properties and Performance of Ultrafine Grained Titanium for Biomedical Applications

    Article • Materials Research, November 2015, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  81. Efficiency of different protocols for enamel clean-up after bracket debonding: an in vitro study

    Article • Dental Press Journal of Orthodontics, October 2015, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  82. Stability of smooth and rough mini-implants: clinical and biomechanical evaluation - an in vivostudy

    Article • Dental Press Journal of Orthodontics, October 2015, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  83. Influence of Screw Length and Bone Thickness on the Stability of Temporary Implants

    Article • Materials, September 2015, MDPI AG

    Carlos Nelson Elias

  84. Natural Curaua Fiber-Reinforced Composites in Multilayered Ballistic Armor

    Article • Metallurgical and Materials Transactions A, July 2015, Springer Science + Business Media

    Carlos Nelson Elias

  85. Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants

    Article • Dental Materials, February 2015, Elsevier

    Carlos Nelson Elias

  86. Influence of cortical thickness on the stability of mini-implants with microthreads

    Article • Brazilian Oral Research, January 2015, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  87. Flexibility and resistance to cyclic fatigue of instruments manufactured by different methods

    Article • Dental Press Endodontics, January 2015, Dental Press International

    Carlos Nelson Elias

  88. Effects of Pymetrozine on biochemical parameters and the midgut ultrastructure of Anthonomus grandis Boheman (Coleoptera: Curculionidae)

    Article • Animal Biology, January 2015, Brill

    Carlos Nelson Elias

  89. Insertion torque versus mechanical resistance of mini- implants inserted in different cortical thickness

    Article • Dental Press Journal of Orthodontics, June 2014, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  90. Influence of Surface Morphology on the Torsion Fracture of NiTi Endodontic Instruments

    Article • Journal of Materials Engineering and Performance, May 2014, Springer Science + Business Media

    Carlos Nelson Elias

  91. Bending Resistance and Dynamic and Static Cyclic Fatigue Life of Reciproc and WaveOne Large Instruments

    Article • Journal of Endodontics, April 2014, Elsevier

    Carlos Nelson Elias

  92. Early Osseointegration Events on Neoss® ProActive and Bimodal Implants: A Comparison of Different Surfaces in an Animal Model

    Article • Clinical Implant Dentistry and Related Research, February 2014, Wiley

    Carlos Nelson Elias

  93. Mechanical Performance of Different Nickel-Titanium Archwires Used in Dentistry

    Article • January 2014, Wiley

    Carlos Nelson Elias

  94. Mechanical Performance of Different Nickel-Titanium Archwires Used in Dentistry

    Article • January 2014, Springer Science + Business Media

    Carlos Nelson Elias

  95. Fatigue behavior of 3%Y2O3-doped ZrO2 ceramics

    Article • Journal of Materials Research and Technology, January 2014, Elsevier

    Carlos Nelson Elias

  96. Integrity of Implant Surface Modifications After Insertion

    Article • The International Journal of Oral & Maxillofacial Implants, January 2014, Quintessence Publishing

    Carlos Nelson Elias

  97. Mechanical properties of NiTi and CuNiTi wires used in orthodontic treatment. Part 2: Microscopic surface appraisal and metallurgical characteristics

    Article • Dental Press Journal of Orthodontics, January 2014, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  98. Shear bond resistance and enamel surface comparison after the bonding and debonding of ceramic and metallic brackets

    Article • Dental Press Journal of Orthodontics, January 2014, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  99. Assessment of exogenous pigmentation in colourless elastic ligatures

    Article • Journal of Orthodontics, December 2013, Taylor & Francis

    Carlos Nelson Elias

  100. Surface morphology changes of acrylic resins during finishing and polishing phases

    Article • Dental Press Journal of Orthodontics, December 2013, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  101. Nanostructured severe plastic deformation processed titanium for orthodontic mini-implants

    Article • Materials Science and Engineering C, October 2013, Elsevier

    Carlos Nelson Elias

  102. Ultrafine grained titanium for biomedical applications: An overview of performance

    Article • Journal of Materials Research and Technology, October 2013, Elsevier

    Carlos Nelson Elias

  103. Clinical Evaluation of Anodized Surface Implants Submitted to a Counter Torque of 25 Ncm After 60 Days of Osseointegration: Study in Humans

    Article • Journal of Maxillofacial and Oral Surgery, September 2013, Springer Science + Business Media

    Carlos Nelson Elias

  104. Comparison of the flexibility and torsional resistance of nickel-titanium rotary instruments

    Article • Dental Press Endodontics, September 2013, Dental Press International

    Carlos Nelson Elias

  105. Mechanical properties of NiTi and CuNiTi shape-memory wires used in orthodontic treatment. Part 1: stress-strain tests

    Article • Dental Press Journal of Orthodontics, August 2013, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  106. Influência de Diferentes Métodos de Fabricação no Comportamento Mecânico de Instrumentos Endodônticos de Níquel-Titânio

    Article • Pesquisa Brasileira em Odontopediatria e Clínica Integrada, June 2013, APESB (Associacao de Apoio a Pesquisa em Saude Bucal)

    Carlos Nelson Elias

  107. Superficial morphology and mechanical properties of in vivo aged orthodontic ligatures

    Article • Dental Press Journal of Orthodontics, June 2013, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  108. degradation Y-TZP

    Article • International Journal of Applied Ceramic Technology, May 2013, Wiley

    Professor Heraldo Elias Salomão dos Santos, Carlos Nelson Elias

  109. Fatigue Life of Reciproc and Mtwo Instruments Subjected to Static and Dynamic Tests

    Article • Journal of Endodontics, May 2013, Elsevier

    Carlos Nelson Elias

  110. Influence of the Geometry of Curved Artificial Canals on the Fracture of Rotary Nickel-Titanium Instruments Subjected to Cyclic Fatigue Tests

    Article • Journal of Endodontics, May 2013, Elsevier

    Carlos Nelson Elias

  111. Comparison of the Mechanical Properties of Rotary Instruments Made of Conventional Nickel-Titanium Wire, M-Wire, or Nickel-Titanium Alloy in R-Phase

    Article • Journal of Endodontics, April 2013, Elsevier

    Carlos Nelson Elias

  112. Cross-section dimensions and mechanical properties of esthetic orthodontic coated archwires

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, April 2013, Elsevier

    Carlos Nelson Elias

  113. Morphological evaluation of the active tip of six types of orthodontic mini-implants

    Article • Dental Press Journal of Orthodontics, April 2013, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  114. Evaluation of the friction force generated by monocristalyne and policristalyne ceramic brackets in sliding mechanics

    Article • Dental Press Journal of Orthodontics, February 2013, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  115. Dental Implants

    Article • International Journal of Biomaterials, January 2013, Hindawi Publishing Corporation

    Carlos Nelson Elias

  116. Anomalous Strain Rate Effect in Ultrafine Grained Titanium

    Article • Journal of Materials Research and Technology, October 2012, Elsevier

    Carlos Nelson Elias

  117. Mechanical Behavior of Pathfinding Endodontic Instruments

    Article • Journal of Endodontics, October 2012, Elsevier

    Carlos Nelson Elias

  118. Sliding resistance of polycarbonate self-ligating brackets and stainless steel esthetic archwires

    Article • Progress in Orthodontics, September 2012, Elsevier

    Carlos Nelson Elias

  119. Influence of CAD/CAM Grinding in the Performance of Sintered Dental Zirconia Framework

    Article • Materials Science Forum, August 2012, Trans Tech Publications

    Carlos Nelson Elias

  120. Assessment of surface friction of self-ligating brackets under conditions of angulated traction

    Article • Dental Press Journal of Orthodontics, August 2012, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  121. Zirconia Blocks Properties Used for CAD/CAM Dentistry Restorations

    Article • Materials Science Forum, August 2012, Trans Tech Publications

    Carlos Nelson Elias

  122. Preparation of Biodegradable Poly(L-Lactide) (PLA) Nanoparticles Containing DMSA (Dimercaptosuccinic Acid) as Novel Radiopharmaceutical

    Article • Advanced Science Letters, May 2012, American Scientific Publishers

    Carlos Nelson Elias

  123. Bleaching effects on shear bond strengths of orthodontic brackets

    Article • Progress in Orthodontics, May 2012, Elsevier

    Carlos Nelson Elias

  124. Buckling Resistance of Pathfinding Endodontic Instruments

    Article • Journal of Endodontics, March 2012, Elsevier

    Carlos Nelson Elias

  125. Orthodontic Implants: Concepts for the Orthodontic Practitioner

    Article • International Journal of Dentistry, January 2012, Hindawi Publishing Corporation

    Carlos Nelson Elias

  126. Preparation of Bioactive Titanium Surfaces via Fluoride and Fibronectin Retention

    Article • International Journal of Biomaterials, January 2012, Hindawi Publishing Corporation

    Carlos Nelson Elias

  127. Influence of Different Manufacturing Methods on the Cyclic Fatigue of Rotary Nickel-Titanium Endodontic Instruments

    Article • Journal of Endodontics, November 2011, Elsevier

    Carlos Nelson Elias

  128. Torsional properties of pathfinding instruments

    Article • Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, November 2011, Elsevier

    Carlos Nelson Elias

  129. Torsional Resistance of Retreatment Instruments

    Article • Journal of Endodontics, October 2011, Elsevier

    Carlos Nelson Elias

  130. Influência da secção transversa de fios ortodônticos na fricção superficial de braquetes autoligados

    Article • Dental Press Journal of Orthodontics, August 2011, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  131. Influence of curvature location along an artificial canal on cyclic fatigue of a rotary nickel-titanium endodontic instrument

    Article • Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, June 2011, Elsevier

    Carlos Nelson Elias

  132. Force extension relaxation of medium force orthodontic latex elastics

    Article • The Angle Orthodontist, May 2011, The Angle Orthodontist (EH Angle Education & Research Foundation)

    Carlos Nelson Elias

  133. Influence of thermal or chemical degradation on the frictional force of an experimental coated NiTi wire

    Article • The Angle Orthodontist, May 2011, The Angle Orthodontist (EH Angle Education & Research Foundation)

    Carlos Nelson Elias

  134. A NiTi rotary instrument manufactured by twisting: morphology and mechanical properties

    Article • Dental Press Endodontics, April 2011, Dental Press International

    Carlos Nelson Elias

  135. Análise química e morfológica do esmalte dentário humano tratado com laser argônio durante a colagem ortodôntica

    Article • Dental Press Journal of Orthodontics, April 2011, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  136. Is it possible to re-use mini-implants for orthodontic anchorage? Results of an in vitro study

    Article • Materials Research, December 2010, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  137. Martensitic transformation of austenitic stainless steel orthodontic wires during intraoral exposure

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, December 2010, Elsevier

    Carlos Nelson Elias

  138. Simulação 3D de movimento ortodôntico

    Article • Dental Press Journal of Orthodontics, October 2010, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  139. Análise do movimento inicial de molares superiores submetidos a forças extrabucais: estudo 3D

    Article • Dental Press Journal of Orthodontics, October 2010, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  140. Effects of Electropolishing Surface Treatment on the Cyclic Fatigue Resistance of BioRace Nickel-Titanium Rotary Instruments

    Article • Journal of Endodontics, October 2010, Elsevier

    Carlos Nelson Elias

  141. Extended cyclic fatigue life of F2 ProTaper instruments used in reciprocating movement

    Article • International Endodontic Journal, September 2010, Wiley

    Carlos Nelson Elias

  142. Cyclic fatigue resistance of ProTaper Universal instruments when subjected to static and dynamic tests

    Article • Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, September 2010, Elsevier

    Carlos Nelson Elias

  143. Comparison of some physical properties of finger spreaders made of stainless steel or nickel-titanium alloys

    Article • Clinical Oral Investigations, June 2010, Springer Science + Business Media

    Carlos Nelson Elias

  144. Improving osseointegration of dental implants

    Article • Expert Review of Medical Devices, March 2010, Taylor & Francis

    Carlos Nelson Elias

  145. Shear bond strengths of orthodontic brackets with a new LED cluster curing light

    Article • Journal of Orthodontics, March 2010, Taylor & Francis

    Carlos Nelson Elias

  146. Titanium dental implant surfaces

    Article • Matéria (Rio de Janeiro), January 2010, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  147. Sequential bone healing of immediately loaded mini-implants: histomorphometric and fluorescence analysis

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, January 2010, Elsevier

    Carlos Nelson Elias

  148. The Effects of Superficial Roughness and Design on the Primary Stability of Dental Implants

    Article • Clinical Implant Dentistry and Related Research, September 2009, Wiley

    Carlos Nelson Elias

  149. Commentaries on scientific papers published in this edition

    Article • Journal of Orthodontics, September 2009, Taylor & Francis

    Carlos Nelson Elias

  150. Asymmetric headgear for differential molar movement: a study using finite element analysis

    Article • Journal of Orthodontics, September 2009, Taylor & Francis

    Carlos Nelson Elias

  151. Ceramic Surface Polishing Techniques After Removal of Orthodontic Adhesive

    Article • The Angle Orthodontist, July 2009, The Angle Orthodontist (EH Angle Education & Research Foundation)

    Carlos Nelson Elias

  152. Influence of Rotational Speed on the Cyclic Fatigue of Rotary Nickel-Titanium Endodontic Instruments

    Article • Journal of Endodontics, July 2009, Elsevier

    Carlos Nelson Elias

  153. Systemic levels of metallic ions released from orthodontic mini-implants

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, April 2009, Elsevier

    Carlos Nelson Elias

  154. Mechanical properties and cytotoxicity of 3Y-TZP bioceramics reinforced with Al2O3 particles

    Article • Ceramics International, March 2009, Elsevier

    Carlos Nelson Elias

  155. Properties of Y-TZP/Al2O3 ceramic nanocomposites obtained by high-energy ball milling

    Article • Materials Science and Engineering A, February 2009, Elsevier

    Carlos Nelson Elias

  156. In Vitro Characterization / Degradation of Two Bioglasses Used as Synthetic Alloplasts for Bone Grafting

    Article • Key Engineering Materials, January 2009, Trans Tech Publications

    Carlos Nelson Elias

  157. Properties of Nanostructured 3Y-TZP Blocks Used for CAD/CAM Dental Restoration

    Article • Key Engineering Materials, January 2009, Trans Tech Publications

    Carlos Nelson Elias

  158. Evaluation of esthetic brackets' resistance to torsional forces from the archwire

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, January 2009, Elsevier

    Carlos Nelson Elias

  159. Relationship between surface properties (roughness, wettability and morphology) of titanium and dental implant removal torque

    Article • Journal of the Mechanical Behavior of Biomedical Materials, July 2008, Elsevier

    Carlos Nelson Elias

  160. Sequential bone healing of immediately loaded mini-implants

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, July 2008, Elsevier

    Carlos Nelson Elias

  161. In vitro degradation of poly-l-d-lactic acid (PLDLA) pellets and powder used as synthetic alloplasts for bone grafting

    Article • Journal of Materials Science Materials in Medicine, May 2008, Springer Science + Business Media

    Carlos Nelson Elias

  162. Mechanical properties of Y-TPZ ceramics obtained by liquid phase sintering using bioglass as additive

    Article • Materials Science and Engineering A, April 2008, Elsevier

    Carlos Nelson Elias

  163. Biomedical applications of titanium and its alloys

    Article • JOM, March 2008, Springer Science + Business Media

    Carlos Nelson Elias

  164. Performance of 3Y-TZP bioceramics under cyclic fatigue loading

    Article • Materials Research, March 2008, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  165. Mechanical testing and finite element analysis of orthodontic teardrop loop

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, February 2008, Elsevier

    Carlos Nelson Elias

  166. Liberação de íons por biomateriais metálicos

    Article • Revista Dental Press de Ortodontia e Ortopedia Facial, December 2007, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  167. Properties of ZrO2–Al2O3 composite as a function of isothermal holding time

    Article • International Journal of Refractory Metals and Hard Materials, September 2007, Elsevier

    Carlos Nelson Elias

  168. Titanium alloy mini-implants for orthodontic anchorage: Immediate loading and metal ion release

    Article • Acta Biomaterialia, May 2007, Elsevier

    Carlos Nelson Elias

  169. Cyclic Fatigue of Protaper Instruments

    Article • Journal of Endodontics, January 2007, Elsevier

    Carlos Nelson Elias

  170. Mini-implantes ortodônticos carregados imediatamente: estudo in vivo

    Article • Matéria (Rio de Janeiro), January 2007, FapUNIFESP (SciELO)

    Carlos Nelson Elias

  171. The physical characterization of a thermoplastic polymer for endodontic obturation

    Article • Journal of Dentistry, November 2006, Elsevier

    Carlos Nelson Elias

  172. Influence of the coating material on the loosing of dental implant abutment screw joints

    Article • Materials Science and Engineering C, September 2006, Elsevier

    Carlos Nelson Elias

  173. Sequential Bone Response to Immediately Loaded Mini-Implants, in vivo Study

    Article • MRS Proceedings, January 2006, Cambridge University Press

    Carlos Nelson Elias

  174. Effect of argon laser curing on the shear bond strength of metal brackets bonded with light-cured glass ionomer cement

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, December 2005, Elsevier

    Carlos Nelson Elias

  175. 10.4028/0-87849-353-0.23

    Article • January 2005, CrossRef Test Account

    Carlos Nelson Elias

  176. 10.4028/0-87849-353-0.603

    Article • January 2005, CrossRef Test Account

    Carlos Nelson Elias

  177. Atomic force microscopy analysis of different surface treatments of Ti dental implant surfaces

    Article • Applied Surface Science, June 2004, Elsevier

    Carlos Nelson Elias

  178. In vitro evaluation of frictional forces between archwires and ceramic brackets

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, January 2004, Elsevier

    Carlos Nelson Elias

  179. Article • Journal of Materials Science Materials in Medicine, January 2003, Springer Science + Business Media

    Carlos Nelson Elias

  180. Fungal Infection of the Radicular Dentin

    Article • Journal of Endodontics, November 2002, Wolters Kluwer Health

    Carlos Nelson Elias

  181. Titanium Dental Implants With Different Morphologies

    Article • Surface Engineering, February 2002, Taylor & Francis

    Carlos Nelson Elias

  182. Transformation of monetite to hydroxyapatite in bioactive coatings on titanium

    Article • Surface and Coatings Technology, March 2001, Elsevier

    Carlos Nelson Elias

  183. Bioactivity Assessment of Hydroxyapatite Coatings Produced by Alkali Conversion of Monetite

    Article • Key Engineering Materials, January 2001, Trans Tech Publications

    Carlos Nelson Elias

  184. Scanning Electron Microscopic Investigation of the Surface of Gutta-Percha Cones after Cutting

    Article • Journal of Endodontics, July 2000, Wolters Kluwer Health

    Carlos Nelson Elias

  185. Influence of heat treatment on the yield strength of orthodontic stainless steel wires

    Article • Journal of Materials Science Letters, January 1993, Springer Science + Business Media

    Carlos Nelson Elias

  186. The effect of partial substitution of nb for v on austenite grain size and hardness of a tool steel

    Article • Journal of Materials Engineering and Performance, December 1992, Springer Science + Business Media

    Carlos Nelson Elias

  187. Effect of ausforming on microstructure and hardness of AISI H-13 tool steel modified with niobium

    Article • Materials Science and Technology, September 1992, Taylor & Francis

    Carlos Nelson Elias

  188. Microstructure of a steel perforated by a metallic jet

    Article • Materials Characterization, July 1992, Elsevier

    Carlos Nelson Elias