All Stories

  1. Informing the Public about Microplastics through a University and Museum Partnership
  2. Ionic Liquid‐Mediated Biopolymer Extraction from Coffee Fruit
  3. Fused filament fabrication of Nylon beyond the glass transition temperature in a thermally-insulated machine
  4. Pressure sensitive adhesives for quantifying microplastic isolation
  5. Characterization of Ingested Plastic Microparticles Extracted from Sea Turtle Post-Hatchlings at Necropsy
  6. “Stuck on You”: Functional Friction Measurements of Doctored Baseballs Coated with “Sticky Substances”
  7. Development of a Microcontroller-Based, Small-Scale Rotational Fiber Collection Device
  8. Using Adhesives to Capture Microplastics from Water
  9. Dewatering of super absorbent polymers: Alternatives to thermal desorption by liquid phase extraction using dimethyl ether
  10. Re‐evaluating expanding intravenous catheters in medical practice
  11. The efficiency of dehydrating desiccants by centrifugation: An assessment of superabsorbent polymers
  12. Swellable catheters based on a dynamic expanding inner diameter
  13. A meta-analysis of bone cement mediated antibiotic release: Overkill, but a viable approach to eradicate osteomyelitis and other infections tied to open procedures
  14. A comparison study of athletic kinesio tapes and structural cloth tapes applied to address biomechanical injuries and muscle stabilization
  15. Ionic liquids: A milestone on the pathway to greener recycling of cellulose from biomass
  16. The effect of cisplatin on the nanoscale structure of aqueous PEO–PPO–PEO micelles of varying hydrophilicity observed using SAXS
  17. Controlled Release Characteristics of Aqueous PEO‐PPO‐PEO Micelles With Added Malachite Green, Erythrosin, and Cisplatin Determined by UV–Visible Spectroscopy
  18. Orthopedics
  19. Artificial Organs
  20. Polymeric Biomaterials
  21. Special Topics
  22. Ceramic Biomaterials
  23. Cell Expression
  24. Neural Interventions
  25. Cell Biology
  26. Metallic Biomaterials
  27. Cardiovascular Interventions
  28. Bones and Mineralized Tissues
  29. Nanomaterials and Phase Contrast Imaging Agents
  30. Connective and Soft Tissues
  31. Environmental Effects on Natural Tissues
  32. Property Assessments of Tissues
  33. A meta analysis of β-lactoglobulin aggregation kinetics comparing temperature, concentration, and chemistry as modulating influences
  34. Thermodynamic properties of aqueous PEO–PPO–PEO micelles of varying hydrophilicity with added cisplatin determined by differential scanning calorimetry
  35. Agitation of amyloid proteins to speed aggregation measured by ThT fluorescence: A call for standardization
  36. Formation of platinum-coated templates of insulin nanowires used in reducing 4-nitrophenol
  37. Thermodynamic properties of aqueous PEO–PPO–PEO micelles with added methylparaben determined by differential scanning calorimetry
  38. Photopolymerization of acrylate suspensions with visible dyes
  39. Probing the temperature sensitivity of induction time in latent cure epoxy resins
  40. Photopolymerization of acrylate suspensions
  41. Gelation of photopolymerized hyaluronic acid grafted with glycidyl methacrylate
  42. Structural Changes in PEO–PPO–PEO Gels Induced by Methylparaben and Dexamethasone Observed Using Time-Resolved SAXS
  43. The Kinetics of Gel Formation for PEO−PPO−PEO Triblock Copolymer Solutions and the Effects of Added Methylparaben
  44. Fabrication and characterization of poly(lactic-co-glycolic acid) microsphere/amorphous calcium phosphate scaffolds
  45. In situ photogelation kinetics of Laponite nanoparticle-based photorheological dispersions
  46. In vitro evaluation of osteoblastic differentiation on amorphous calcium phosphate-decorated poly(lactic-co-glycolic acid) scaffolds
  47. An integrated instrument for rapidly deforming living cells using rapid pressure pulses and simultaneously monitoring applied strain in near real time
  48. MMA bulk polymerization and its influence on in situ resin viscosity comparing several chemorheological models
  49. In situ Dynamic Rheological Study of Polyacrylamide during Gelation Coupled with Mathematical Models of Viscosity Advancement
  50. Modeling the effect of the curing conversion on the dynamic viscosity of epoxy resins cured by an anhydride curing agent
  51. Cure advancement of urethane networks using a sigmoidal chemorheological model
  52. Cure versus Flow in Dispersed Chip‐Underfill Materials
  53. Sigmoidal Chemorheological Models of Chip‐Underfill Materials Offer Alternative Predictions of Combined Cure and Flow
  54. Chemorheology of photopolymerizable acrylates using a modified Boltzmann sigmoidal model
  55. The Presence of Adsorbed Proteins on Particles Increases Aggregated Particle Sedimentation, as Measured by a Light Scattering Technique
  56. A Physical Basis for Stability in Bimodal Dispersions Including Micrometer-sized Particles and Nanoparticles using Both Linear and Non-linear Models to Describe Yield
  57. Photodimerization of Coumarin Functionalized Poly(alkyl Acrylate) and Poly(alkyl Methacrylate) Random Copolymers: Influence of Copolymer Composition on Photocrosslinking
  58. Dynamic photorheological analysis of photopolymerizable urethane dimethacrylate resins with varying diluent content and light fluence
  59. Analyzing the dynamic chemorheology of curing resins: Extraction of model parameters associated with cure advancement
  60. Effect of soluble zinc on differentiation of osteoprogenitor cells
  61. Design and application of an oscillatory compression device for cell constructs
  62. Bidisperse Magnetorheological Fluids using Fe Particles at Nanometer and Micron Scale
  63. Reduced transglutaminase-catalyzed protein aggregation is observed in the presence of creatine using sedimentation velocity
  64. Fabrication and characterization of poly(DL-lactic-co-glycolic acid)/zirconia-hybridized amorphous calcium phosphate composites
  65. Osteoblast response to zirconia‐hybridized pyrophosphate‐stabilized amorphous calcium phosphate
  66. Crystallization of photo-chain extended poly(ethylene glycol)
  67. Development of a Light-Deactivatable PSA Via Photodimerization
  68. Maximizing dye fluorescence via incorporation of metallic nanoparticles in solution
  69. Dicyandiamide precipitation in epoxy solutions and latex dispersions: threshold concentration analysis using a two-stage drying model
  70. Coumarins in Polymers: From Light Harvesting to Photo‐Cross‐Linkable Tissue Scaffolds
  71. Analytical Model Development for Stokes-Type Settling in a Solidifying Fluid
  72. Coumarins in Polymers:  From Light Harvesting to Photo-Cross-Linkable Tissue Scaffolds
  73. Photoreversible Chain Extension of Poly(ethylene glycol)
  74. Adaptation of acrylic photopolymerized resins as model bone cements in total hip arthroplasties
  75. Phase transformation to β‐poly(vinylidene fluoride) by milling
  76. Properties of Photopolymerisable Acrylic Adhesives for Underwater Bonding
  77. Construction of iso-concentration sedimentation velocities using Z-axis translating laser light scattering
  78. <title>Impact of varying concentrations of nanometer-sized particles in a bidisperse magnetorheological fluid</title>
  79. Preparation of Polymeric Stationary Phase for Use in Inverse Gas Chromatography
  80. “Reversible Macromolecules” as Scaffolds for Adaptive Structures
  81. Nanometer and Micron Sized Particles in a Bidisperse Magnetorheological Fluid
  82. Settling behavior of specific acrylic particles in Bis-GMA based reactive slurries
  83. Design of a z-axis translating laser light scattering device for particulate settling measurement in dispersed fluids
  84. Transience of plasma surface modification as an adhesion promoter for polychlorotrifluorethylene
  85. Acid cleaning solutions for barnacle-covered surfaces
  86. UV−Visible Light:  A Novel Route to Tune the Type of an Emulsion
  87. Photopolymerizable acrylic resin: Effect of curing time and temperature
  88. Influence of surface chemistry on particle-particle aggregation as measured by a Coulter Counter in the low concentration regime
  89. Comparison study of dicyandiamide-cured epoxy bonded steel joints and polyamidoamine-cured epoxy bonded steel joints
  90. Surface Chemical Characterization of Copper Oxide and its Relationship to Adhesion in Formed Epoxy/Copper Interfaces
  91. Extractable free monomers from self-cured dental sealants resulting from dispensing errors
  92. Étude par émission de rayons X de films d'oxyde de cuivre formés sur des substrats de cuivre
  93. Evaluation of collisional damage in polystyrene foam constructions using a dual hammer impact test
  94. Fabrication and characterization of dipalmitoylphosphatidylcholine-attracting elastomeric material for joint replacements
  95. Clinical effectiveness of fluoride-releasing elastomers. II. Enamel microhardness levels
  96. Controlling Adhesion of Orthodontic Adhesives Through Adjustment of the Interphase Mechanical Properties
  97. Discussion of “Properties of PVB Interlayer Used in Laminated Glass” by C. V. Girija Vallabhan, Y. C. Das, and Manjunatha Ramasamudra (February, 1992, Vol. 4, No. 1)
  98. Effects of Surface Modifications on the Peel Strength of Copper Based Polymer/Metal Interfaces with Characteristic Morphologies
  99. Surface analysis preparations for multilayer plated through‐holes
  100. Compact disk educational supplements for biomaterials and biomedical education