Professor Emeritus, Senior Professor Bengt Aake Sunden

All Stories

1. 
   Numerical investigation of aluminum powder combustion with upstream kerosene auxiliary burner in a supersonic cavity-based combustor

   Article • Aerospace Science and Technology, December 2026, Elsevier

   Professor Emeritus, Senior Professor Bengt Aake Sunden

2. 
   Comparative study of two simulation methods for thermal analysis of the Ceramic matrix composite plate

   Article • International Journal of Heat and Fluid Flow, September 2026, Elsevier

   Professor Emeritus, Senior Professor Bengt Aake Sunden

3. 
   Active Control of Electric Field for Enhancing Condensation Heat Transfer on Grooved Surface

   Article • ASME Journal of Heat and Mass Transfer, June 2026, ASME International

   Professor Emeritus, Senior Professor Bengt Aake Sunden

4. 
   Effect of rotation control on thermal performance of phase change unit with annular fins

   Article • International Journal of Heat and Mass Transfer, May 2026, Elsevier

   Professor Emeritus, Senior Professor Bengt Aake Sunden

5. 
   Study on heat transfer characteristics of supercritical CO2/n-decane composite double triangular regenerative cooling for scramjets

   Article • Aerospace Science and Technology, May 2026, Elsevier

   Professor Emeritus, Senior Professor Bengt Aake Sunden

6. 
   Effects of various cylindrical hole layouts on film cooling effectiveness of a cavity blade tip

   Article • International Journal of Heat and Fluid Flow, March 2026, Elsevier

   Professor Emeritus, Senior Professor Bengt Aake Sunden

7. 
   Effects of the coating type and yarn fiber volume fraction on the coupling heat transfer characteristics for the ceramic matrix composite plate

   Article • International Journal of Thermal Sciences, February 2026, Elsevier

   Professor Emeritus, Senior Professor Bengt Aake Sunden

8. 
   High-fidelity LES of pin fin-jet configuration effects on supercritical n-decane flow and heat transfer in regenerative cooling channels

   Article • International Journal of Thermal Sciences, February 2026, Elsevier

   Professor Emeritus, Senior Professor Bengt Aake Sunden

9. 
   Influence of fluctuating heat sources and the subzone rotation strategy on the solid-liquid phase transition process: experimental and numerical studies

   Article • International Journal of Thermal Sciences, February 2026, Elsevier

   Professor Emeritus, Senior Professor Bengt Aake Sunden

10. 
    Research progress on synergistic enhanced heat transfer of metal foams in phase change energy storage process

    Article • International Journal of Heat and Mass Transfer, February 2026, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

11. 
    Large eddy simulation study of supercritical n-decane flow in jet-regenerative cooling channels: thermo-hydraulic behavior of circular vs. oval jet impingement configurations

    Article • Thermal Science and Engineering Progress, January 2026, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

12. 
    Optimization of an Airfoil-Fin Printed Circuit Heat Exchanger with Curved Vortex Generator

    Article • Heat Transfer Engineering, January 2026, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

13. 
    Double cut design of horizontal phase change heat storage device: experimental and numerical study

    Article • International Journal of Thermal Sciences, November 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

14. 
    Experimental and numerical investigation of flow dynamics and thermal behavior of supercritical n-decane in jet-regeneration composite cooling technology for scramjet engines

    Article • International Journal of Thermal Sciences, November 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

15. 
    Heat absorption performance of ultrasonic-assisted phase change thermal management units: A numerical study

    Article • International Journal of Heat and Mass Transfer, November 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

16. 
    Heat transfer and performance analysis of phase change thermal control system under variable gravity conditions

    Article • Proceedings of the Institution of Civil Engineers - Energy, November 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

17. 
    Solidification characteristics in rotating gradient metal foam based on Taguchi and response surface analysis

    Article • International Journal of Heat and Mass Transfer, November 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

18. 
    Comprehensive performance of building systems using sensible-latent heat composite energy storage structure under all-day solar radiation conditions

    Article • Proceedings of the Institution of Civil Engineers - Energy, October 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

19. 
    Numerical investigations of flow and heat transfer characteristics of a regenerative cooling channel using supercritical CO2 with different cross-section shapes

    Article • International Journal of Thermal Sciences, September 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

20. 
    Thermo-fluidic characteristics of rotated conical heat storage tank: A numerical study

    Article • Numerical Heat Transfer Part A Applications, August 2025, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

21. 
    Enhanced analysis of flow characteristics and thermal performance in multiple jet impingements: Effects of varying jet heights and spacings

    Article • Journal of the Taiwan Institute of Chemical Engineers, July 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

22. 
    Flow and heat transfer characteristic of regenerative cooling channels using supercritical CO2 with circular tetrahedral lattice structures

    Article • Case Studies in Thermal Engineering, July 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

23. 
    Design and numerical simulation of direct cooling evaporators for chip thermal test based on triply periodic minimal surfaces

    Article • Case Studies in Thermal Engineering, May 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

24. 
    Investigation of enhanced pool boiling heat transfer with Fe magnetic thin films electrochemically deposited under different magnetic field orientations

    Article • International Journal of Heat and Mass Transfer, May 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

25. 
    Enhanced transient flow and heat transfer analysis in diverse regeneration cooling modes incorporating thermal-fluid-structure interaction effects

    Article • Thermal Science and Engineering Progress, April 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

26. 
    Thermal-hydraulic performances and characteristics of hierarchical rib arrangements in serpentine cooling channels

    Article • Applied Thermal Engineering, April 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

27. 
    Effects of water vapor concentration on the film cooling effectiveness of hydrogen gas turbine vane

    Article • International Journal of Heat and Fluid Flow, March 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

28. 
    Flow and heat transfer mechanism of a regenerative cooling channel mounted with pin-fins using supercritical CO2 as coolant

    Article • International Journal of Thermal Sciences, February 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

29. 
    Influence of hole blockage caused by thermal barrier coatings on the turbine vane endwall film cooling performance

    Article • International Journal of Thermal Sciences, February 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

30. 
    Thermal characteristics of conical heat storage tank filled by metal foam: Optimization by response surface analysis

    Article • International Journal of Thermal Sciences, February 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

31. 
    A review of calibration standards, devices and methods for gas flow in semiconductor manufacturing processes

    Article • Flow Measurement and Instrumentation, January 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

32. 
    Melting and solidification performance of latent heat thermal energy storage system under flip condition

    Article • International Journal of Heat and Mass Transfer, January 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

33. 
    Numerical and experimental investigation of film cooling effectiveness distribution predictions that considers the effects of the turbulent Schmidt number

    Article • International Journal of Heat and Mass Transfer, January 2025, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

34. 
    Experimental and numerical investigations of cooling characteristics on endwall partitioned film cooling with shaped holes

    Article • International Journal of Thermal Sciences, December 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

35. 
    Saturated/subcooled flow boiling heat transfer characteristics for R134a, HFE-7100 and Deionized water inside micro/mini-channels: Part I - Visualization of flow patterns and new diabatic two-phase flow pattern transition regimes

    Article • International Journal of Heat and Mass Transfer, December 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

36. 
    Saturated/subcooled flow boiling heat transfer characteristics for R134a, HFE-7100 and Deionized water inside micro/mini-channels: Part Ⅱ – New CHF prediction model establishment

    Article • International Journal of Heat and Mass Transfer, December 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

37. 
    Turbine blade tip aerothermal characteristics considering the influences of cavity tip shaping

    Article • International Journal of Thermal Sciences, October 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

38. 
    Effect of non-axisymmetric endwall contouring and swirling inlet flow on film cooling performance of turbine endwall

    Article • International Journal of Heat and Mass Transfer, September 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

39. 
    Endwall film cooling performance considering the effects of micro-riblets configurations and layouts

    Article • International Journal of Heat and Fluid Flow, September 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

40. 
    Experimental and numerical investigations on film cooling performance of converging slot holes in plate and turbine conditions

    Article • Applied Thermal Engineering, September 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

41. 
    Overall cooling investigation of the composite platforms considering the anisotropic thermal conductivities and weaving pattern

    Article • International Journal of Heat and Fluid Flow, September 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

42. 
    Investigation of heat transfer performance and enhancement mechanisms of supercritical carbon dioxide in PCHE with fractal airfoil fins

    Article • Case Studies in Thermal Engineering, August 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

43. 
    Thermodynamic performance and flow structures analysis of supercritical CO2 applied in a regenerative cooling channel mounted with mini-ribs

    Article • Case Studies in Thermal Engineering, August 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

44. 
    Experimental study of pool boiling performance of Fe3O4 ferromagnetic nanofluid on a copper surface

    Article • Applied Thermal Engineering, July 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

45. 
    Experimental Study on Melting and Solidification Cycle of a Hybrid Pin Fin/Metal Foam Energy Storage Tank

    Article • ASME Journal of Heat and Mass Transfer, May 2024, ASME International

    Professor Emeritus, Senior Professor Bengt Aake Sunden

46. 
    Thermal-hydraulic performance of printed circuit heat exchangers with various channel shapes under rolling conditions

    Article • Applied Thermal Engineering, May 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

47. 
    Effect of nanoparticle concentration and surfactants on nanofluid pool boiling

    Article • International Journal of Heat and Mass Transfer, April 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

48. 
    Investigation of a nozzle guide vane cooling characteristic under one engine inoperative conditions

    Article • International Journal of Heat and Fluid Flow, April 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

49. 
    Film cooling performance under plasma aerodynamic actuation and spoiler ribs of an internal cooling channel based on Suzen model

    Article • Numerical Heat Transfer Part A Applications, March 2024, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

50. 
    An inverse optimization of turbulent flow and heat transfer for a cooling passage with hierarchically arranged ribs in turbine blades

    Article • International Journal of Heat and Mass Transfer, March 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

51. 
    Design and assessment on a bottom-cut shape for latent heat storage tank filled with metal foam

    Article • International Journal of Thermal Sciences, March 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

52. 
    Numerical investigation of conjugated heat transfer mechanisms of supercritical hydrogen-helium in PCHE channels

    Article • Numerical Heat Transfer Part A Applications, February 2024, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

53. 
    Scale effect of micro ribs on the turbulent transport in an internal cooling channel

    Article • Physics of Fluids, February 2024, American Institute of Physics

    Professor Emeritus, Senior Professor Bengt Aake Sunden

54. 
    Effect of truncated pin-fins on flow and heat transfer characteristics with impinging jets on a concave surface

    Article • Numerical Heat Transfer Part A Applications, January 2024, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

55. 
    A Review of Calibration Standards, Devices and Methods for Process Gas Flow

    Article • January 2024, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

56. 
    Advances in Heat Transfer Augmentation Techniques in Single-Phase Flows

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

57. 
    Computational methods used in heat transfer

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

58. 
    Heat transfer augmentation

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

59. 
    Heat transfer augmentation using jet impingement

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

60. 
    Heat transfer augmentation using nanofluids

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

61. 
    Heat transfer augmentation using pulsatile flows

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

62. 
    Heat transfer augmentation using ultrasound and magnetic forces

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

63. 
    Heat transfer augumentation using vortex flow

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

64. 
    Heat transfer measurement techniques

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

65. 
    Introduction to heat transfer

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

66. 
    Performance evaluation methods for different heat transfer techniques

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

67. 
    Using surface modification

    Article • December 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

68. 
    Effect of pore density and filling ratio of metal foam on melting performance in a heat storage tank

    Article • Numerical Heat Transfer Part A Applications, November 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

69. 
    Effect of phase change heat storage tank with gradient fin structure on solar energy storage: A numerical study

    Article • International Journal of Heat and Mass Transfer, November 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

70. 
    Numerical study of heat transfer and load-bearing performances of corrugated sandwich structure with open-cell metal foam

    Article • International Journal of Heat and Mass Transfer, November 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

71. 
    Performance evaluation with turbulent flow and heat transfer characteristics in rectangular cooling channels with various novel hierarchical rib schemes

    Article • International Journal of Heat and Mass Transfer, November 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

72. 
    A modified dynamic Lee model for two-phase closed thermosyphon (TPCT) simulation

    Article • Numerical Heat Transfer Part B Fundamentals, October 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

73. 
    Energy-saving optimization of the parallel chillers system based on a multi-strategy improved sparrow search algorithm

    Article • Heliyon, October 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

74. 
    Progress in phase change nano-emulsions for energy applications-A concise review

    Article • Journal of Molecular Liquids, October 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

75. 
    Thermo-Economic Performance Analysis of Modified Latent Heat Storage System for Residential Heating

    Article • Energies, September 2023, MDPI AG

    Professor Emeritus, Senior Professor Bengt Aake Sunden

76. 
    Investigation on Thermal and Hydraulic Performances in a Printed Circuit Heat Exchanger with Airfoil and Vortex Generating Fins

    Article • Heat Transfer Engineering, August 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

77. 
    Thermomechanical performances of sandwich panels with multi-layer multi-row lightening holes: Comparative study on corrugated-core and X-core

    Article • Thermal Science and Engineering Progress, August 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

78. 
    Heat transfer enhancement and flow characteristics of internal cooling channels with slit vortex generators

    Article • Numerical Heat Transfer Part A Applications, July 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

79. 
    Applications of spouted bed technology in the drying of food products

    Article • LWT, June 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

80. 
    Corrigendum to “Effects of wavy ribs on vortex generation and thermal-hydraulic performance in a rotating rectangular channel” [Appl. Therm. Eng. 222 (2023) 119952]

    Article • Applied Thermal Engineering, May 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

81. 
    Investigation and optimization on melting performance of a triplex-tube heat storage tank by rotational mechanism

    Article • International Journal of Heat and Mass Transfer, May 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

82. 
    Principle and performance optimization analysis of a frost-free control for electric vehicle heat pumps

    Article • Applied Thermal Engineering, May 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

83. 
    Thermal energy storage characteristics of finned tubes with different gradients of fin heights

    Article • Numerical Heat Transfer Part A Applications, April 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

84. 
    Numerical study on dynamic performance of low temperature recuperator in a S-CO 2 Brayton cycle

    Article • Numerical Heat Transfer Part A Applications, February 2023, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

85. 
    Convective transport characteristics of condensing droplets in moist air flow

    Article • Physics of Fluids, February 2023, American Institute of Physics

    Professor Emeritus, Senior Professor Bengt Aake Sunden

86. 
    Solar air heater performance enhancement with differently shaped miniature combined with dimple shaped roughness: CFD and experimental analysis

    Article • Solar Energy, January 2023, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

87. 
    Model-based assessment of boiling heat transfer enhanced by coatings

    Article • International Journal of Heat and Mass Transfer, November 2022, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

88. 
    Effects of the multicavity tip coolant injection on the blade tip and the over tip casing aerothermal performance in a high-pressure turbine cascade

    Article • Numerical Heat Transfer Part A Applications, August 2022, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

89. 
    Experimental study on the augmented Nusselt number of the endwall through a square-sectioned sharp-turn channel using novel heat exchanger

    Article • International Journal of Heat and Mass Transfer, August 2022, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

90. 
    Performance improvement of proton exchange membrane fuel cells with wavy flow channels: An experimental study

    Article • International Journal of Energy Research, July 2022, Wiley

    Professor Emeritus, Senior Professor Bengt Aake Sunden

91. 
    Transient multiphysics coupled model for multiscale droplet condensation out of moist air

    Article • Numerical Heat Transfer Part A Applications, July 2022, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

92. 
    Derivation of a continuous adjoint topology optimization method applied on heat transfer for incompressible flow

    Article • Numerical Heat Transfer Part A Applications, July 2022, Taylor & Francis

    Professor Emeritus, Senior Professor Bengt Aake Sunden

93. 
    Parametric Study on Thermo-Hydraulic Performance of NACA Airfoil Fin PCHEs Channels

    Article • Energies, July 2022, MDPI AG

    Professor Emeritus, Senior Professor Bengt Aake Sunden

94. 
    Thermal management performance improvement of phase change material for autonomous underwater vehicles' battery module by optimizing fin design based on quantitative evaluation method

    Article • International Journal of Energy Research, June 2022, Wiley

    Professor Emeritus, Senior Professor Bengt Aake Sunden

95. 
    Experimental evaluation of longitudinal and transverse vortex generators on the endwall of a serpentine passage

    Article • International Journal of Thermal Sciences, June 2022, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

96. 
    Generation and Propagation Characteristics of an Auto-Ignition Flame Kernel Caused by the Oblique Shock in a Supersonic Flow Regime

    Article • Energies, May 2022, MDPI AG

    Professor Emeritus, Senior Professor Bengt Aake Sunden

97. 
    Influence of spacing of a delta-winglet vortex generator pair on the flow behavior and heat transfer at the internal tip of gas turbine blades

    Article • International Journal of Thermal Sciences, May 2022, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

98. 
    Buoyancy and Thermal Acceleration of Supercritical n-Decane in a Rectangular Channel

    Article • Journal of Thermophysics and Heat Transfer, April 2022, American Institute of Aeronautics and Astronautics (AIAA)

    Professor Emeritus, Senior Professor Bengt Aake Sunden

99. 
    Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids

    Article • Proceedings of the Institution of Civil Engineers - Energy, January 2022, Elsevier

    Professor Emeritus, Senior Professor Bengt Aake Sunden

100. 
     Heat transfer deterioration in upward and downward pipe flows of supercritical n-decane for actively regenerative cooling

     Article • International Journal of Thermal Sciences, October 2021, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

101. 
     Combined experimental and numerical studies on flow characteristic and heat transfer in ribbed channels with vortex generators of various types and arrangements

     Article • International Journal of Thermal Sciences, September 2021, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

102. 
     Flow structure and heat transfer characteristics in a ribbed two-pass channel with varying divider inclination angle

     Article • International Journal of Thermal Sciences, August 2021, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

103. 
     An LBM-based investigation of thermal buoyancy and arrangement angle on flow characteristics and heat transfer over four heated square cylinders

     Article • Numerical Heat Transfer Part B Fundamentals, June 2021, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

104. 
     Improvement of cooling performance of hybrid nanofluids in a heated pipe applying annular magnets

     Article • May 2021, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

105. 
     Coriolis and buoyancy effects on heat transfer in viewpoint of field synergy principle and secondary flow intensity for maximization of internal cooling

     Article • Heat and Mass Transfer, March 2021, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

106. 
     On the topology of vortex structures and heat transfer of a gas turbine blade internal tip with different arrangement of delta-winglet vortex generators

     Article • International Journal of Thermal Sciences, February 2021, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

107. 
     Nanoparticle-Assisted Pool Boiling Heat Transfer on Micro-Pin-Fin Surfaces

     Article • Langmuir, January 2021, American Chemical Society (ACS)

     Professor Emeritus, Senior Professor Bengt Aake Sunden

108. 
     The transport and thermodynamic characteristics of thermally oscillating phenomena in a buoyancy-driven supercritical fuel flow

     Article • International Journal of Thermal Sciences, January 2021, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

109. 
     Numerical investigation of flow field and heat transfer characteristics in a latticework duct with jet cooling structures

     Article • International Journal of Thermal Sciences, December 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

110. 
     Experimental investigation of heat transfer performance of a heat pipe combined with thermal energy storage materials of CuO-paraffin nanocomposites

     Article • Solar Energy, November 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

111. 
     Flow and thermal performance of supercritical n-decane in double-layer channels for regenerative cooling of a scramjet combustor

     Article • Applied Thermal Engineering, November 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

112. 
     A high temperature turbine blade heat transfer multilevel design platform

     Article • Numerical Heat Transfer Part A Applications, October 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

113. 
     Endwall film cooling holes design upstream of the leading edge of a turbine vane

     Article • Numerical Heat Transfer Part A Applications, October 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

114. 
     Heat-Dissipation Performance of Nanocomposite Phase-Change Materials in a Twin-Heat-Source System

     Article • Fluids, October 2020, MDPI AG

     Professor Emeritus, Senior Professor Bengt Aake Sunden

115. 
     Influence of alternating V-rows tube layout on thermal-hydraulic characteristics of twisted elliptical tube heat exchangers

     Article • International Journal of Heat and Mass Transfer, October 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

116. 
     Thermodynamic and exergoeconomic analysis of a novel CO2 based combined cooling, heating and power system

     Article • Energy Conversion and Management, October 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

117. 
     On the heat transfer characteristics of a Lamilloy cooling structure with curvatures with different pin fins configurations

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, September 2020, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

118. 
     Investigation of Heat Transfer Characteristics of Al2O3-Water Nanofluids in an Electric Heater

     Article • Heat Transfer Engineering, September 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

119. 
     Pool Boiling of NOVEC-649 on Microparticle-Coated and Nanoparticle-Coated Surfaces

     Article • Heat Transfer Engineering, September 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

120. 
     Vortical structures and heat transfer augmentation of a cooling channel in a gas turbine blade with various arrangements of tip bleed holes

     Article • Numerical Heat Transfer Part A Applications, September 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

121. 
     Performance analysis of a plate heat exchanger using various nanofluids

     Article • International Journal of Heat and Mass Transfer, September 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

122. 
     Performance of fuel-air combustion in a reheating furnace at different flowrate and inlet conditions

     Article • Proceedings of the Institution of Civil Engineers - Energy, September 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

123. 
     Numerical investigations on the effect of convex-dimple streamwise arrangements on the flow and heat transfer characteristics of rectangular convex-dimple-grooved channels

     Article • Numerical Heat Transfer Part A Applications, August 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

124. 
     Heat Transfer and Secondary Flow Characteristics in a Horizontally Round Pipe for Cooling a Scramjet Combustor by Supercritical n-Decane

     Article • Journal of Energy Resources Technology, August 2020, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

125. 
     Entropy Study on the Enhanced Heat Transfer Mechanism of the Coupling of Detached and Spiral Vortex Fields in Spirally Corrugated Tubes

     Article • Heat Transfer Engineering, August 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

126. 
     LBM modeling and analysis on microchannel slip flow and heat transfer under different heating conditions

     Article • Numerical Heat Transfer Part A Applications, July 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

127. 
     Effect of wall conduction on the heat transfer characteristics of supercritical n-decane in a horizontal rectangular pipe for cooling of a scramjet combustor

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, July 2020, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

128. 
     Comparative study on the adiabatic film cooling performances with elliptical or super-elliptical holes of various length-to-width ratios

     Article • International Journal of Thermal Sciences, July 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

129. 
     Improved modeling of heat transfer in dropwise condensation

     Article • International Journal of Heat and Mass Transfer, July 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

130. 
     Numerical studies of gas-liquid Taylor flows in vertical capillaries using CuO/water nanofluids

     Article • International Communications in Heat and Mass Transfer, July 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

131. 
     On neural network modeling to maximize the power output of PEMFCs

     Article • Electrochimica Acta, July 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

132. 
     Comparative analysis on the film cooling mechanisms of elliptical and cylindrical holes with 90° compound angle

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, June 2020, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

133. 
     PREDICTION OF MASS TRANSFER COEFFICIENT OF THE CONTINUOUS PHASE IN A STRUCTURED PACKED EXTRACTION COLUMN IN THE PRESENCE OF SIO2 NANOPARTICLES

     Article • Frontiers in Heat and Mass Transfer, June 2020, Global Digital Central

     Professor Emeritus, Senior Professor Bengt Aake Sunden

134. 
     Improvements of the Adiabatic Film Cooling by Using Two-Row Holes of Different Geometries and Arrangements

     Article • Journal of Energy Resources Technology, June 2020, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

135. 
     Effect and optimization of backward hole parameters on film cooling performance by Taguchi method

     Article • Energy Conversion and Management, June 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

136. 
     Special Issue: Smart Flow Control in Micro Scale

     Article • Processes, May 2020, MDPI AG

     Professor Emeritus, Senior Professor Bengt Aake Sunden

137. 
     Numerical study of heat transfer in gravity-driven dense particle flow around a hexagonal tube

     Article • Powder Technology, May 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

138. 
     A network model and numerical simulations of flow distributions in packed bed reactors with different packing structures

     Article • Applied Thermal Engineering, May 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

139. 
     Application of ultrasound technology in the drying of food products

     Article • Ultrasonics Sonochemistry, May 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

140. 
     Breakup dynamics of gas-liquid interface during Taylor bubble formation in a microchannel flow-focusing device

     Article • Experimental Thermal and Fluid Science, May 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

141. 
     Optimization of fin configurations and layouts in a printed circuit heat exchanger for supercritical liquefied natural gas near the pseudo-critical temperature

     Article • Applied Thermal Engineering, May 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

142. 
     Transport dynamics of droplet impact on the wedge-patterned biphilic surface

     Article • Experimental Thermal and Fluid Science, May 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

143. 
     Synthesis and experimental study of novel double perovskite Ba 2 Ni x Co 2−x O 6 as promising oxygen c...

     Article • International Journal of Energy Research, April 2020, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

144. 
     Numerical Study of Heat Transfer in Gravity-Driven Particle Flow around Tubes with Different Shapes

     Article • Energies, April 2020, MDPI AG

     Professor Emeritus, Senior Professor Bengt Aake Sunden

145. 
     A numerical study of heat transfer effects and aerodynamic noise reduction in superheated steam flow passing a temperature and pressure regulation valve

     Article • Numerical Heat Transfer Part A Applications, April 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

146. 
     Investigation on Thermal-Hydraulic Performance in a Printed Circuit Heat Exchanger with Airfoil and Vortex Generator Fins for Supercritical Liquefied Natural Gas

     Article • Heat Transfer Engineering, April 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

147. 
     An improved method to visualize two regions of interest synchronously in microfluidics

     Article • Flow Measurement and Instrumentation, April 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

148. 
     Performance investigation on twisted elliptical tube heat exchangers with coupling-vortex square tube layout

     Article • International Journal of Heat and Mass Transfer, April 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

149. 
     Experimental investigation on micromixing characteristics of coaxial mixers in viscous system

     Article • The Canadian Journal of Chemical Engineering, March 2020, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

150. 
     Corrigendum to “Computational analysis of the impact of a micro porous layer (MPL) on the characteristics of a high temperature PEMFC” [Electrochim. Acta 333 (2020) 135552]

     Article • Electrochimica Acta, March 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

151. 
     Experimental investigation on heat transfer characteristics of various nanofluids in an indoor electric heater

     Article • Renewable Energy, March 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

152. 
     Parametric study on flow characteristics and heat transfer in rectangular channels with strip slits in ribs on one wall

     Article • International Journal of Heat and Mass Transfer, March 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

153. 
     Study of effects of axisymmetric endwall contouring on film cooling/heat transfer and secondary losses in a cascade of first stage nozzle guide vane

     Article • Applied Thermal Engineering, March 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

154. 
     Effect of various surfactants on stability and thermophysical properties of nanofluids

     Article • February 2020, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

155. 
     Investigation of gas–liquid dispersion and mass transfer performance of wide-viscosity-range impellers in water solutions of xanthan gum

     Article • Chemical Engineering Research and Design, February 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

156. 
     Computational analysis of the impact of a micro porous layer (MPL) on the characteristics of a high temperature PEMFC

     Article • Electrochimica Acta, February 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

157. 
     The abnormal heat transfer behavior of supercritical n-decane flowing in a horizontal tube under regenerative cooling for scramjet engines

     Article • Applied Thermal Engineering, February 2020, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

158. 
     Numerical investigation of particle deposition in film-cooled blade leading edge

     Article • Numerical Heat Transfer Part A Applications, January 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

159. 
     Unified formula for the field synergy principle

     Article • Numerical Heat Transfer Part B Fundamentals, January 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

160. 
     Assessment of flow pattern and temperature profiles by residence time distribution in typical structured packed beds

     Article • Numerical Heat Transfer Part A Applications, January 2020, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

161. 
     COMPUTATIONAL INVESTIGATION OF CURVATURE EFFECTS ON JET IMPINGEMENT HEAT TRANSFER AT INTERNALLY COOLED TURBINE VANE LEADING EDGE REGIONS

     Article • Heat Transfer Research, January 2020, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

162. 
     PREFACE: SUPERCRITICAL CARBON DIOXIDE IN THERMAL AND ENERGY SCIENCES

     Article • Heat Transfer Research, January 2020, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

163. 
     Analysis of laminar flow and heat transfer in an interrupted microchannel heat sink with different shaped ribs

     Article • December 2019, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

164. 
     Experimental and numerical study of natural convection in bottom-heated cylindrical cavity filled with molten salt nanofluids

     Article • December 2019, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

165. 
     Effect of the Radial Measurement Position on the Determination of Just-Suspended Speed Using Pressure Gauge Technology

     Article • Industrial & Engineering Chemistry Research, December 2019, American Chemical Society (ACS)

     Professor Emeritus, Senior Professor Bengt Aake Sunden

166. 
     Design of Full-Scale Endwall Film Cooling of a Turbine Vane

     Article • Journal of Heat Transfer, December 2019, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

167. 
     Heat transfer study of a hybrid smooth and spirally corrugated tube

     Article • Heat Transfer Engineering, December 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

168. 
     Air inlet angle influence on the air-side heat transfer and flow friction characteristics of a finned oval tube heat exchanger

     Article • International Journal of Heat and Mass Transfer, December 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

169. 
     Electrophoretic deposition surfaces to enhance HFE-7200 pool boiling heat transfer and critical heat flux

     Article • International Journal of Thermal Sciences, December 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

170. 
     Large eddy simulation of turbulent heat transfer in a non-isothermal channel: Effects of temperature-dependent viscosity and thermal conductivity

     Article • International Journal of Thermal Sciences, December 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

171. 
     Magnetic Field Effect on Thermal, Dielectric, and Viscous Properties of a Transformer Oil-Based Magnetic Nanofluid

     Article • Energies, November 2019, MDPI AG

     Professor Emeritus, Senior Professor Bengt Aake Sunden

172. 
     Numerical analysis of supercritical n-decane upward flow and heat transfer characteristics in the buffer layer of a vertical tube

     Article • Numerical Heat Transfer Part A Applications, November 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

173. 
     Numerical Investigation and Estimating Correlation of Micromixing Performance of Coaxial Mixers

     Article • Industrial & Engineering Chemistry Research, November 2019, American Chemical Society (ACS)

     Professor Emeritus, Senior Professor Bengt Aake Sunden

174. 
     Effect of the relative location of a pocket cavity on heat transfer and flow structures of the downstream endwall with a symmetrical vane

     Article • International Journal of Thermal Sciences, November 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

175. 
     Effects of a Dynamic Injection Flow Rate on Slug Generation in a Cross-Junction Square Microchannel

     Article • Processes, October 2019, MDPI AG

     Professor Emeritus, Senior Professor Bengt Aake Sunden

176. 
     Numerical Investigation on Thermal Performance Design of Cryogenic Compact Heat Exchangers with Serrated-Fin Channels

     Article • Heat Transfer Engineering, October 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

177. 
     Analysis of Fouling in Six-Start Spirally Corrugated Tubes

     Article • Heat Transfer Engineering, October 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

178. 
     Parametric study and optimization on heat transfer and flow characteristics in a rectangular channel with longitudinal vortex generators

     Article • Numerical Heat Transfer Part A Applications, October 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

179. 
     Heat transfer prediction and critical heat flux mechanism for pool boiling of NOVEC-649 on microporous copper surfaces

     Article • International Journal of Heat and Mass Transfer, October 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

180. 
     Research on thermal properties of novel silica nanoparticle/binary nitrate/expanded graphite composite heat storage blocks

     Article • Solar Energy Materials and Solar Cells, October 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

181. 
     A comprehensive review on liquid–liquid two-phase flow in microchannel: flow pattern and mass transfer

     Article • Microfluidics and Nanofluidics, September 2019, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

182. 
     Energy analysis and multi-objective optimization of waste heat and cold energy recovery process in LNG-fueled vessels based on a triple organic Rankine cycle

     Article • Energy Conversion and Management, September 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

183. 
     Energy saving in thermal energy systems using dimpled surface technology – A review on mechanisms and applications

     Article • Applied Energy, September 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

184. 
     Saturated pool boiling heat transfer of acetone and HFE-7200 on modified surfaces by electrophoretic and electrochemical deposition

     Article • Applied Energy, September 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

185. 
     Enhanced heat transfer in a labyrinth channels with ribs of different shape

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2019, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

186. 
     Development of new finned tube heat exchanger: Innovative tube-bank design and thermohydraulic performance

     Article • Heat Transfer Engineering, August 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

187. 
     Analysis of heat transfer and fluid flow of a slot jet impinging on a confined concave surface with various curvature and small jet to target spacing

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2019, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

188. 
     Computational analysis of span-wise hole locations on fluid flow and film cooling of internal channels with crescent ribs

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2019, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

189. 
     Heat transfer analysis on dimple geometries and arrangements in dimple jacketed heat exchanger

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2019, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

190. 
     Thermal performance enhancement in a wedge duct with in-line pin fins combined with vortex generators

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2019, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

191. 
     Design guidelines for fluid-elastic instability of tube bundles subjected to two-phase cross flow

     Article • Journal of Zhejiang University SCIENCE A, August 2019, Journal of Zhejiang University SCIENCE

     Professor Emeritus, Senior Professor Bengt Aake Sunden

192. 
     Feasibility study on a novel heat exchanger network for cryogenic liquid regasification with cooling capacity recovery: Theoretical and experimental assessments

     Article • Proceedings of the Institution of Civil Engineers - Energy, August 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

193. 
     Analysis of a hybrid control scheme in the district heating system with distributed variable speed pumps

     Article • Sustainable Cities and Society, July 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

194. 
     The Behavior of Turbulent Heat Transfer Deterioration in Supercritical Hydrocarbon Fuel Flow Considering Thermal Resistance Distribution

     Article • International Journal of Thermal Sciences, July 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

195. 
     The contact angle of nanofluids as thermophysical property

     Article • Journal of Colloid and Interface Science, July 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

196. 
     Thermo-Hydraulic Performance Enhancement of Finned Elliptical Tube Heat Exchangers by Utilizing Innovative Dimple Turbulators

     Article • Heat Transfer Engineering, June 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

197. 
     Heat transfer characteristics of a dimpled/protrusioned pin fin wedge duct with different converging angles for turbine blades

     Article • Numerical Heat Transfer Part A Applications, June 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

198. 
     A numerical framework for heat transfer and pressure loss estimation of matrix cooling geometry in stationary and rotational states

     Article • Numerical Heat Transfer Part A Applications, June 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

199. 
     Effect of hole configurations on film cooling performance

     Article • Numerical Heat Transfer Part A Applications, June 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

200. 
     Experimental Investigation on Drawdown of Floating Particles in Viscous Systems Driven by Coaxial Mixers

     Article • Industrial & Engineering Chemistry Research, June 2019, American Chemical Society (ACS)

     Professor Emeritus, Senior Professor Bengt Aake Sunden

201. 
     Experimental study of fluid flow and heat transfer of jet impingement in cross-flow with a vortex generator pair

     Article • International Journal of Heat and Mass Transfer, June 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

202. 
     Heat transfer and flow structure in a detached latticework duct

     Article • Applied Thermal Engineering, June 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

203. 
     The influences of sidewall proximity on flow and thermal performance of a microchannel with large-row pin-fins

     Article • International Journal of Thermal Sciences, June 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

204. 
     Turbulent heat transfer characteristics of supercritical n ‐decane in a vertical tube under various operating pressures

     Article • International Journal of Energy Research, May 2019, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

205. 
     Effect of gas distributor on gas–liquid dispersion and mass transfer characteristics in stirred tank

     Article • Chemical Engineering Research and Design, May 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

206. 
     A numerical prediction on heat transfer characteristics from a circular tube in supercritical fluid crossflow

     Article • Applied Thermal Engineering, May 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

207. 
     Numerical investigation on flow and thermal performance of supercritical CO2 in horizontal cylindrically concaved tubes

     Article • Applied Thermal Engineering, May 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

208. 
     Analysis of heat and mass transport characteristics in anode-supported solid oxide fuel cells at various operating conditions

     Article • Numerical Heat Transfer Part A Applications, April 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

209. 
     Large eddy simulation of turbulent flow and heat transfer in outward transverse and helically corrugated tubes

     Article • Numerical Heat Transfer Part A Applications, April 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

210. 
     Correlations for prediction of the bubble departure radius on smooth flat surface during nucleate pool boiling

     Article • International Journal of Heat and Mass Transfer, April 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

211. 
     Experimental investigation on convective heat transfer of ferrofluids inside a pipe under various magnet orientations

     Article • International Journal of Heat and Mass Transfer, April 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

212. 
     Pool boiling of HFE-7200 on nanoparticle-coating surfaces: Experiments and heat transfer analysis

     Article • International Journal of Heat and Mass Transfer, April 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

213. 
     Prediction and Comparison of Shell Condensers With Straight or Helical Channels for Underwater Vehicles

     Article • Journal of Thermal Science and Engineering Applications, March 2019, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

214. 
     Effect of droplet characteristics on heat transfer of mist/air cooling in a pin-finned channel

     Article • Numerical Heat Transfer Part A Applications, March 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

215. 
     Flow patterns and slug scaling of liquid-liquid flow in square microchannels

     Article • International Journal of Multiphase Flow, March 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

216. 
     Heat Transfer Enhancement and Turbulent Flow in a Rectangular Channel Using Perforated Ribs With Inclined Holes

     Article • Journal of Heat Transfer, February 2019, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

217. 
     Heat transfer and flow structure in a rotating duct with detached pin fins

     Article • Numerical Heat Transfer Part A Applications, February 2019, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

218. 
     The energy performance of a single‐screw compressor for natural gas liquefaction process: Effects of the lubricating oil flow rate

     Article • International Journal of Energy Research, February 2019, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

219. 
     An analysis of pool boiling heat transfer on nanoparticle-coated surfaces

     Article • Energy Procedia, February 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

220. 
     Investigation of Mixed Convection in an Enclosure Filled with Nanofluids of Al2O3–Water and Graphene-Ethylene Glycol

     Article • Journal of Nanofluids, February 2019, American Scientific Publishers

     Professor Emeritus, Senior Professor Bengt Aake Sunden

221. 
     Nucleate pool boiling heat transfer of acetone and HFE7200 on copper surfaces with nanoparticle coatings

     Article • Energy Procedia, February 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

222. 
     Suppression of endwall heat transfer in the junction region with a symmetric airfoil by a vortex generator pair

     Article • International Journal of Thermal Sciences, February 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

223. 
     Effect of A-/B-site Doping on Oxygen Non-Stoichiometry, Structure characteristics, and O2 Releasing Behavior of La1−xCaxCo1−yFeyO3−δ Perovskites

     Article • Energies, January 2019, MDPI AG

     Professor Emeritus, Senior Professor Bengt Aake Sunden

224. 
     Influences of secondary flow induced by Coriolis forces and angled ribs on heat transfer in a rotating channel

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, January 2019, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

225. 
     Effect of phase change materials on heat dissipation of a multiple heat source system

     Article • Open Physics, January 2019, De Gruyter

     Professor Emeritus, Senior Professor Bengt Aake Sunden

226. 
     Hydrogen, Batteries and Fuel Cells

     Article • January 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

227. 
     Influences of a multi-cavity tip on the blade tip and the over tip casing aerothermal performance in a high pressure turbine cascade

     Article • Applied Thermal Engineering, January 2019, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

228. 
     A parametric comparison of temperature uniformity and energy performance of a PEMFC having serpentine wavy channels

     Article • International Journal of Energy Research, December 2018, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

229. 
     Comparative evaluations of thermofluidic characteristics of sandwich panels with X-lattice and Pyramidal-lattice cores

     Article • International Journal of Heat and Mass Transfer, December 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

230. 
     Effects of Graphene Ethylene Glycol/Water Nanofluids on the Performance of a Brazed Plate Heat Exchanger

     Article • Journal of Nanofluids, December 2018, American Scientific Publishers

     Professor Emeritus, Senior Professor Bengt Aake Sunden

231. 
     Enhancement of loop heat pipe performance with the application of micro/nano hybrid structures

     Article • International Journal of Heat and Mass Transfer, December 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

232. 
     Convergence angle and dimple shape effects on the heat transfer characteristics in a rotating dimple-pin fin wedge duct

     Article • Numerical Heat Transfer Part A Applications, November 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

233. 
     Effects of an MPL on water and thermal management in a PEMFC

     Article • International Journal of Energy Research, November 2018, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

234. 
     Investigation of Bubble Departure Radius in Subcooled Pool Boiling Under Microgravity Condition

     Article • November 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

235. 
     Pool Boiling Heat Transfer Enhancement of Water by Gold Nanoparticles With an Electrophoretic Deposition Method

     Article • November 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

236. 
     Pool Boiling Heat Transfer of N-Pentane and Acetone on Nanostructured Surfaces by Electrophoretic Deposition

     Article • November 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

237. 
     Theoretical Model of Droplets Motions on Solid Surface With Radial Wettable and Evaporation Rate Gradients

     Article • November 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

238. 
     Thermal Design and Performance Prediction of a Shell Condenser for Closed-Cycle Underwater Vehicles

     Article • November 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

239. 
     Numerical predictions of flow and heat transfer of film cooling with an internal channel roughened by crescent ribs

     Article • Numerical Heat Transfer Part A Applications, November 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

240. 
     Heat transfer correlations for jet impingement boiling over micro-pin-finned surface

     Article • International Journal of Heat and Mass Transfer, November 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

241. 
     Numerical investigation of entropy generation of turbulent flow in a novel outward corrugated tube

     Article • International Journal of Heat and Mass Transfer, November 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

242. 
     Pool boiling heat transfer of FC-72 on pin-fin silicon surfaces with nanoparticle deposition

     Article • International Journal of Heat and Mass Transfer, November 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

243. 
     Liquid-liquid two-phase flow patterns in ultra-shallow straight and serpentine microchannels

     Article • Heat and Mass Transfer, October 2018, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

244. 
     A review on molten-salt-based and ionic-liquid-based nanofluids for medium-to-high temperature heat transfer

     Article • October 2018, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

245. 
     Effects of a pocket cavity on heat transfer and flow characteristics of the endwall with a bluff body in a gas turbine engine

     Article • Applied Thermal Engineering, October 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

246. 
     Surface temperature reduction by using dimples/protrusions in a realistic turbine blade trailing edge

     Article • Numerical Heat Transfer Part A Applications, September 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

247. 
     Effects of gravity and variable thermal properties on nanofluid convective heat transfer using connected and unconnected walls

     Article • Energy Conversion and Management, September 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

248. 
     Thermophysical properties and convection heat transfer behavior of ionic liquid [C4mim][NTf2] at medium temperature in helically corrugated tubes

     Article • Applied Thermal Engineering, September 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

249. 
     On the improvement of film cooling performance using tree-shaped network holes: A comparative study

     Article • Numerical Heat Transfer Part A Applications, August 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

250. 
     Numerical study on thermal performance of non-uniform flow channel designs for cooling plates of PEM fuel cells

     Article • Numerical Heat Transfer Part A Applications, August 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

251. 
     The Hydraulic Cavitation Affected by Nanoparticles in Nanofluids

     Article • Computation, August 2018, MDPI AG

     Professor Emeritus, Senior Professor Bengt Aake Sunden

252. 
     Effects of the pocket cavity on heat transfer and fluid flow of the downstream outlet guide vane at different flow attacking angles

     Article • Numerical Heat Transfer Part A Applications, August 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

253. 
     Effects of gas diffusion layer deformation on the transport phenomena and performance of PEM fuel cells with interdigitated flow fields

     Article • International Journal of Hydrogen Energy, August 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

254. 
     Localized carbon deposition in solid oxide electrolysis cells studied by multiphysics modeling

     Article • Journal of Power Sources, August 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

255. 
     Effects of the cooling configurations layout near the first-stage vane leading edge on the endwall cooling and phantom cooling of the vane suction side surface

     Article • International Journal of Heat and Mass Transfer, August 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

256. 
     Experimental comparative evaluation of a graphene nanofluid coolant in miniature plate heat exchanger

     Article • International Journal of Thermal Sciences, August 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

257. 
     Pool boiling heat transfer of N-pentane on micro/nanostructured surfaces

     Article • International Journal of Thermal Sciences, August 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

258. 
     Effect of Operational Parameters on Combustion and Emissions in an Industrial Gas Turbine Combustor

     Article • Journal of Energy Resources Technology, July 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

259. 
     Water-Oil Flow in Square Microchannels With a Crossed Junction

     Article • July 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

260. 
     Numerical analysis on thermal performance of cooling plates with wavy channels in PEM fuel cells

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, July 2018, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

261. 
     A three dimensional multiphysics model of a solid oxide electrochemical cell: A tool for understanding degradation

     Article • International Journal of Hydrogen Energy, July 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

262. 
     Application of fractal theory in the arrangement of truncated ribs in a rectangular cooling channel (4:1) of a turbine blade

     Article • Applied Thermal Engineering, July 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

263. 
     Computational investigation of the dust hole effect on the heat transfer and friction factor characteristics in a U bend channel

     Article • Applied Thermal Engineering, July 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

264. 
     Correct interpretation of nanofluid convective heat transfer

     Article • International Journal of Thermal Sciences, July 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden, Tapio Ala-Nissila

265. 
     Dimensionless analysis on liquid-liquid flow patterns and scaling law on slug hydrodynamics in cross-junction microchannels

     Article • Chemical Engineering Journal, July 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

266. 
     Entropy generation analysis of fully-developed turbulent heat transfer flow in inward helically corrugated tubes

     Article • Numerical Heat Transfer Part A Applications, June 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

267. 
     Effects of the Location of the Pocket Cavity on Heat Transfer and Flow Characteristics of the Endwall With a Symmetrical Vane

     Article • June 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

268. 
     Enhanced Heat Transfer and Thermal Performance of a Blade With Tree-Shaped Film Cooling Channels

     Article • June 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

269. 
     Reduction of Heat Transfer on the Endwall in the Upstream Junction Region of a Symmetric Airfoil With Vortex Generator Pair

     Article • June 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

270. 
     Effects of Size and Sodium Dodecyl Sulfate on Mass Transfer for Liquid-Liquid Two-Phase Flow in Non-Circular Glass Microchannels

     Article • June 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

271. 
     Water-Silicone Oil Two-Phase Flow Hydrodynamics in a Square Glass Microchannel

     Article • June 2018, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

272. 
     Conjugated heat transfer investigation with racetrack-shaped jet hole and double swirling chamber in rotating jet impingement

     Article • Numerical Heat Transfer Part A Applications, June 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

273. 
     Experimental investigations and correlation development of convective heat transfer in a rotating smooth channel

     Article • Experimental Thermal and Fluid Science, June 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

274. 
     Effect of blockage configuration on film cooling with and without mist injection

     Article • Proceedings of the Institution of Civil Engineers - Energy, June 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

275. 
     Effects of the swirling coolant jet from the upstream slot on the vane endwall cooling and the vane suction side phantom cooling

     Article • International Journal of Heat and Mass Transfer, June 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

276. 
     Medium-term heat load prediction for an existing residential building based on a wireless on-off control system

     Article • Proceedings of the Institution of Civil Engineers - Energy, June 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

277. 
     A geometric study on shell side heat transfer and flow resistance of a six-start spirally corrugated tube

     Article • Numerical Heat Transfer Part A Applications, May 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

278. 
     Mass transfer between phases in microchannels: A review

     Article • Chemical Engineering and Processing - Process Intensification, May 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

279. 
     Influence of the pressure side injection slot on the cooling performance of endwall surface

     Article • Numerical Heat Transfer Part A Applications, April 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

280. 
     Effects of agglomerate model parameters on transport characterization and performance of PEM fuel cells

     Article • International Journal of Hydrogen Energy, April 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

281. 
     Performance study on a single-screw compressor for a portable natural gas liquefaction process

     Article • Proceedings of the Institution of Civil Engineers - Energy, April 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

282. 
     Heat Transfer and Heat Exchangers

     Article • March 2018, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

283. 
     Thermal performance of angled, V-shaped and leaning-V-shaped ribs in a rotating rectangular channel with 45° orientation

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, March 2018, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

284. 
     Parametric evaluation and performance comparison of a modified CO2 transcritical refrigeration cycle in air-conditioning applications

     Article • Chemical Engineering Research and Design, March 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

285. 
     Rheological and Thermal Transport Characteristics of a Transformer Oil Based Ferrofluid

     Article • Acta Physica Polonica A, March 2018, Institute of Physics, Polish Academy of Sciences

     Professor Emeritus, Senior Professor Bengt Aake Sunden

286. 
     Heat transfer and MHD flow of non-newtonian Maxwell fluid through a parallel plate channel: analytical and numerical solution

     Article • Mechanical Sciences, February 2018, Copernicus GmbH

     Professor Emeritus, Senior Professor Bengt Aake Sunden

287. 
     Flow structure and heat transfer characteristics of a 90°-turned pin-finned wedge duct with dimples at different locations

     Article • Numerical Heat Transfer Part A Applications, January 2018, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

288. 
     Heat transfer study on a hybrid smooth and spirally corrugated tube

     Article • MATEC Web of Conferences, January 2018, EDP Sciences

     Professor Emeritus, Senior Professor Bengt Aake Sunden

289. 
     Effects of nanoparticles on hydraulic cavitation

     Article • MATEC Web of Conferences, January 2018, EDP Sciences

     Professor Emeritus, Senior Professor Bengt Aake Sunden

290. 
     A review of multiphase flow and deposition effects in film-cooled gas turbines

     Article • Thermal Science, January 2018, National Library of Serbia

     Professor Emeritus, Senior Professor Bengt Aake Sunden

291. 
     ANALYSIS OF NATURAL CONVECTION OF Cu AND TiO2 NANOFLUIDS INSIDE NONCONVENTIONAL ENCLOSURES

     Article • Journal of Enhanced Heat Transfer, January 2018, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

292. 
     Effect of combined hole configuration on film cooling with and without mist injection

     Article • Thermal Science, January 2018, National Library of Serbia

     Professor Emeritus, Senior Professor Bengt Aake Sunden

293. 
     Effect of spherical blockage configurations on film cooling

     Article • Thermal Science, January 2018, National Library of Serbia

     Professor Emeritus, Senior Professor Bengt Aake Sunden

294. 
     ENHANCEMENT OF HFE-7200 POOL BOILING HEAT TRANSFER ON COPPER SURFACES WITH NANOPARTICLE COATINGS

     Article • January 2018, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

295. 
     EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER ENHANCEMENT ON THE ENDWALL AROUND AN OBSTACLE EMBEDDED WITH A VORTEX GENERATOR PAIR

     Article • January 2018, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

296. 
     Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4:1) with ribs of various truncation types and arrangements

     Article • International Journal of Thermal Sciences, January 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

297. 
     INVESTIGATION OF HEAT TRANSFER AND FLUID FLOW IN FRACTAL TRUNCATED RIBBED CHANNELS FOR THE INTERNAL COOLING OF TURBINE BLADES

     Article • January 2018, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

298. 
     Numerical investigation of heat transfer and fluid flow in a rotating rectangular channel with variously-shaped discrete ribs

     Article • Applied Thermal Engineering, January 2018, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

299. 
     ON THE PROPER INTERPRETATION OF NANOFLUID CONVECTIVE HEAT TRANSFER

     Article • January 2018, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

300. 
     PRESSURE FLUCTUATIONS OF LIQUID-LIQUID SLUG FLOW IN CROSS-JUNCTION SQUARE MICROCHANNELS

     Article • January 2018, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

301. 
     SIMULATION OF HEAT TRANSFER IN THE CONTACT LINE REGION OF PURE PENTANE AND PENTANE/HEXANE MIXTURE IN A CLOSED MICROCAVITY

     Article • January 2018, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

302. 
     Numerical investigation of transport phenomena in high temperature proton exchange membrane fuel cells with different flow field designs

     Article • Numerical Heat Transfer Part A Applications, December 2017, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

303. 
     On electric resistance effects of non-homogeneous GDL deformation in a PEM fuel cell

     Article • International Journal of Hydrogen Energy, November 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

304. 
     Three-dimensional modeling and investigation of high temperature proton exchange membrane fuel cells with metal foams as flow distributor

     Article • International Journal of Hydrogen Energy, November 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

305. 
     A Parametric Study of Hydrodynamic Cavitation Inside Globe Valves

     Article • Journal of Fluids Engineering, October 2017, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

306. 
     Multi-objective optimization of a solar receiver considering both the dimple/protrusion depth and delta-winglet vortex generators

     Article • Proceedings of the Institution of Civil Engineers - Energy, October 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

307. 
     Numerical analysis of radiative heat transfer in an inhomogeneous and non-isothermal combustion system considering H2O/CO2/CO and soot

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, September 2017, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

308. 
     Effects of Engineered Micro/Nanostructures on Nucleate Pool Boiling Heat Transfer

     Article • Nanoscience &amp Nanotechnology-Asia, August 2017, Bentham Science Publishers

     Professor Emeritus, Senior Professor Bengt Aake Sunden

309. 
     Dryout-type critical heat flux in vertical upward annular flow: effects of entrainment rate, initial entrained fraction and diameter

     Article • Heat and Mass Transfer, July 2017, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

310. 
     Enhancement of heat transfer in a square channel by roughened surfaces in rib-elements and turbulent flow manipulation

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, July 2017, Emerald

     Dr Martin Andersson, Professor Emeritus, Senior Professor Bengt Aake Sunden

311. 
     Enhanced Thermal Performance of Internal Y-Shaped Bifurcation Microchannel Heat Sinks With Metal Foams

     Article • Journal of Thermal Science and Engineering Applications, June 2017, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

312. 
     The effect of the size of square microchannels on hydrodynamics and mass transfer during liquid-liquid slug flow

     Article • AIChE Journal, June 2017, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

313. 
     Investigation of effects of non-homogenous deformation of gas diffusion layer in a PEM fuel cell

     Article • International Journal of Energy Research, May 2017, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

314. 
     Influence of anisotropic gas diffusion layers on transport phenomena in a proton exchange membrane fuel cell

     Article • International Journal of Energy Research, May 2017, Wiley

     Dr Martin Andersson, Professor Emeritus, Senior Professor Bengt Aake Sunden

315. 
     Effects of the layout of film holes near the vane leading edge on the endwall cooling and phantom cooling of the vane suction side surface

     Article • Numerical Heat Transfer Part A Applications, May 2017, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

316. 
     Two-phase flow simulation of mist film cooling with deposition for various boundary conditions

     Article • Numerical Heat Transfer Part A Applications, May 2017, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

317. 
     Constructal Optimization of Louver Fin Channels Subjected to Heat Transfer Rate Maximization and Pressure Loss Minimization

     Article • Heat Transfer Engineering, March 2017, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

318. 
     On Heat Transfer Issues for Wind Energy Systems

     Article • Journal of Energy Resources Technology, February 2017, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

319. 
     Fuel Cells

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

320. 
     Ablation

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

321. 
     Introduction

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

322. 
     Aerodynamic Heating

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

323. 
     Aerospace Heat Exchangers

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

324. 
     Microgravity Heat Transfer

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

325. 
     Cryogenics

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

326. 
     Measuring Techniques

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

327. 
     Low-Density Heat Transfer

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

328. 
     Heat Pipes for Aerospace Application

     Article • January 2017, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

329. 
     3D fluid-structure interaction (FSI) simulation of new type vortex generators in smooth wavy fin-and-elliptical tube heat exchanger

     Article • Engineering Computations, November 2016, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

330. 
     A numerical investigation of dimple effects on internal heat transfer enhancement of a double wall cooling structure with jet impingement

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, September 2016, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

331. 
     Numerical study of turbulent forced convection in a finned tube with and without CuO nano fluid

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, September 2016, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

332. 
     A new formulation and analysis of a collapsing bubble with different content in a liquid induced during acoustic cavitation

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2016, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

333. 
     Heat transfer and friction factor in a dimple-pin fin wedge duct with various dimple depth and converging angle

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2016, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

334. 
     Comparison of heat transfer characteristics of aviation kerosene flowing in smooth and enhanced mini tubes at supercritical pressures

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, May 2016, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

335. 
     Effects of hybrid nanofluid mixture in plate heat exchangers

     Article • Experimental Thermal and Fluid Science, April 2016, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

336. 
     Advances in Heat Transfer Enhancement

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

337. 
     Conclusions

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

338. 
     Additional Remarks

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

339. 
     Passive Techniques

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

340. 
     Introduction

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

341. 
     Introduction

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

342. 
     Active Techniques

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

343. 
     Advances in Passive Techniques

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

344. 
     Advances in Compound Techniques (Fourth Generation Heat Transfer Technology)

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

345. 
     Nano-Fluids, Next-Generation Heat Transfer

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

346. 
     Effect of Ultrasounds on Thermal Exchange

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

347. 
     Meaning of Improved Heat Exchanger

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

348. 
     Conclusions and Future Work

     Article • January 2016, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

349. 
     Application of many-body dissipative particle dynamics to determine liquid characteristics

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, September 2015, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

350. 
     Influence of phase change on self-pressurization in cryogenic tanks under microgravity

     Article • Applied Thermal Engineering, August 2015, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

351. 
     Advanced Heat Exchangers for Clean and Sustainable Technology

     Article • July 2015, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

352. 
     Effects of a Vortex Generator Pair on Jet Impingement Heat Transfer in Cross-Flow

     Article • June 2015, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

353. 
     Heat transfer and pressure drop in a smooth and ribbed turn region of a two-pass channel

     Article • Applied Thermal Engineering, June 2015, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

354. 
     Conjugated heat transfer analysis of a film cooling passage with different rib configurations

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, May 2015, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

355. 
     Performance of Heat Exchangers Using Nanofluids

     Article • March 2015, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

356. 
     Numerical investigation of fluid flow structure and heat transfer in a passage with continuous and truncated V-shaped ribs

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, January 2015, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

357. 
     Highlights of Fuel Cell Modeling From a Lattice Boltzmann Method Point of View

     Article • November 2014, ASME International

     Mayken Espinoza-Andaluz, Dr Martin Andersson, Professor Emeritus, Senior Professor Bengt Aake Sunden

358. 
     Frictional Pressure Drop Correlations for Single-Phase Flow, Condensation and Evaporation in Microfin Tubes

     Article • November 2014, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

359. 
     An Experimental Study of Heat Transfer on an Outlet Guide Vane

     Article • June 2014, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

360. 
     Coarse-grained molecular dynamics investigation of nanostructures and thermal properties of porous anode for solid oxide fuel cell

     Article • Journal of Power Sources, May 2014, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

361. 
     Multiscale Modeling Approaches of Transport Phenomena in Fuel Cells

     Article • January 2014, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

362. 
     Flow and Thermal Performance of Graphite Foam Dimpled Fin Heat Exchangers

     Article • January 2014, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

363. 
     Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow

     Article • Applied Thermal Engineering, January 2014, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

364. 
     A numerical investigation of heat transfer in a smooth bend part of a U-duct

     Article • International Journal of Numerical Methods for Heat & Fluid Flow, December 2013, Emerald

     Professor Emeritus, Senior Professor Bengt Aake Sunden

365. 
     Perspectives on Lattice Boltzmann Modeling of Transport Processes With Electrochemical Reactions in SOFCs

     Article • November 2013, ASME International

     Dr Martin Andersson, Professor Emeritus, Senior Professor Bengt Aake Sunden

366. 
     Analysis of Self-Pressurization Phenomenon in a Cryogenic Fluid Storage Tank With VOF Method

     Article • November 2013, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

367. 
     Effect of Blockage-Ratio on Developing Heat Transfer for a Rectangular Duct With Transverse Ribs

     Article • June 2013, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

368. 
     Comparison of Continuous and Truncated Ribs on Internal Blade Tip Cooling

     Article • June 2012, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

369. 
     Effects of Ribs on Internal Blade-Tip Cooling

     Article • January 2011, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

370. 
     Vehicle Cooling Systems for Reducing Fuel Consumption and Carbon Dioxide: Literature Survey

     Article • May 2010, SAE International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

371. 
     Steam Condensation in Parallel Channels of Plate Heat Exchangers

     Article • January 2010, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

372. 
     NUMERICAL INVESTIGATION OF TWO-PHASE AQUEOUS FOAM FLOW FOR HEAT EXCHANGER APPLICATIONS

     Article • January 2008, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

373. 
     Computational Heat Transfer in Heat Exchangers

     Article • Heat Transfer Engineering, November 2007, Taylor & Francis

     Professor Emeritus, Senior Professor Bengt Aake Sunden

374. 
     Heat Transfer and Heat Exchangers

     Article • May 2007, Wiley

     Professor Emeritus, Senior Professor Bengt Aake Sunden

375. 
     COMPUTATIONAL HEAT TRANSFER IN RESEARCH AND DESIGN OF HEAT EXCHANGERS

     Article • January 2006, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

376. 
     PIV MEASUREMENT OF THE FLOW FIELD IN A SQUARE CHANNEL WITH PERIODIC TRANSVERSE RIBS ON ONE WALL

     Article • January 2006, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

377. 
     Water Recovery Schemes and Effects on the Water/Thermal Balances for a 100 kW PEMFC System

     Article • January 2006, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

378. 
     CFD in Design and Development of Heat Exchangers

     Article • January 2005, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

379. 
     Computational Heat Transfer in Heat Exchanger Analysis and Design (Invited)

     Article • January 2005, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

380. 
     Simulation of Heat Transfer From Swirling Impinging Jets

     Article • January 2005, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

381. 
     Two-phase flow analysis in a cathode duct of PEFCs

     Article • Electrochimica Acta, November 2004, Elsevier

     Professor Emeritus, Senior Professor Bengt Aake Sunden

382. 
     MODELING OF THE ABSORPTION COEFFICIENT IN THE EXPONENTIAL WIDE BAND MODEL (EWBM)

     Article • January 2004, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden

383. 
     On Partially Corrugated Ducts in Heat Exchangers

     Article • January 2002, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

384. 
     A Comparison of Some Heat Transfer Surfaces for Small Gas Turbine Recuperators

     Article • June 2001, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

385. 
     Numerical Simulation of Turbulent Impingement Cooling

     Article • June 2001, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

386. 
     Convective Heat Transfer and Fluid Dynamics in Heat Exchanger Applications

     Article • January 1999, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

387. 
     Flow and Heat Transfer Mechanisms in Plate-and-Frame Heat Exchangers

     Article • January 1999, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

388. 
     Heat Transfer and Fluid Flow in Rib-Roughened Rectangular Ducts

     Article • January 1999, Springer Science + Business Media

     Professor Emeritus, Senior Professor Bengt Aake Sunden

389. 
     Recuperators in Gas Turbine Systems

     Article • June 1998, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

390. 
     Investigation of a Turbulence Model for Wall Cooling of Combustion Chambers

     Article • June 1998, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

391. 
     Calculation of Convective Heat Transfer in Square-Sectioned Gas Turbine Blade Cooling Channels

     Article • June 1998, ASME International

     Professor Emeritus, Senior Professor Bengt Aake Sunden

392. 
     PERFORMANCE OF RNG TURBULENCE MODELLING FOR TURBULENT FORCED CONVECTIVE HEAT TRANSFER IN DUCTS

     Article • January 1997, Begell House

     Professor Emeritus, Senior Professor Bengt Aake Sunden