All Stories

  1. YOLOv8-Based Defect Detection for the Selection of Defect-Free Beech Wood Specimens: Experimental and Numerical Validation

    Article • Forests, September 2026, MDPI AG

    Baciu Florin

  2. In Situ (Al3Zr, ZrB2)/AA6063 Composites Produced by Melt Reaction Technique

    Article • Solids, September 2026, MDPI AG

    Baciu Florin

  3. High-Temperature Tensile Behavior of Wrought and SLM-Fabricated Inconel 718: Effects of Build Orientation and Finite Element Modeling

    Article • Technologies, August 2026, MDPI AG

    Baciu Florin

  4. Prediction of the Young’s Modulus of Polylactic Acid Specimens Manufactured by Fused Deposition Modeling Using Machine Learning-Based Stacking Ensemble Methods

    Article • Polymers, July 2026, MDPI AG

    Baciu Florin

  5. Experimental Characterization and Numerical Optimization of 3D-Printed PA6-CF External Fixator Rings

    Article • Journal of Manufacturing and Materials Processing, February 2026, MDPI AG

    Baciu Florin

  6. Biocompatible Inorganic PVD MeSiON Thin Films (Me = Cr or Zr) Used to Enhance the Bond Strength Between NiCr-Based Metallic Frameworks and Ceramic in Dental Restorations

    Article • Dentistry Journal, July 2025, MDPI AG

    Baciu Florin

  7. Comparative Analysis of Mechanical Properties: Conventional vs. Additive Manufacturing for Stainless Steel 316L

    Article • Materials, September 2024, MDPI AG

    Baciu Florin

  8. In Situ Fabrication of TiC/Ti–Matrix Composites by Laser Directed Energy Deposition

    Article • Materials, August 2024, MDPI AG

    Baciu Florin

  9. Examining the Flexural Behavior of Thermoformed 3D-Printed Wrist–Hand Orthoses: Role of Material, Infill Density, and Wear Conditions

    Article • Polymers, August 2024, MDPI AG

    Baciu Florin

  10. Contributions to the Dynamic Regime Behavior of a Bionic Leg Prosthesis

    Article • Biomimetics, September 2023, MDPI AG

    Baciu Florin

  11. A Novel Composite Helicopter Tail Rotor Blade with Enhanced Mechanical Properties

    Article • Aerospace, July 2023, MDPI AG

    Baciu Florin

  12. Investigations on the Fatigue Behavior of 3D-Printed and Thermoformed Polylactic Acid Wrist–Hand Orthoses

    Article • Polymers, June 2023, MDPI AG

    Baciu Florin

  13. Effect of UV-C Radiation on 3D Printed ABS-PC Polymers

    Article • Polymers, April 2023, MDPI AG

    Baciu Florin

  14. 3D-Printed Polycaprolactone Mechanical Characterization and Suitability Assessment for Producing Wrist–Hand Orthoses

    Article • Polymers, January 2023, MDPI AG

    Baciu Florin

  15. Experimental and Numerical Analysis of Chlorinated Polyethylene Honeycomb Mechanical Performance as Opposed to an Aluminum Alloy Design

    Article • Materials, November 2022, MDPI AG

    Baciu Florin

  16. Mechanical Characteristics Evaluation of a Single Ply and Multi-Ply Carbon Fiber-Reinforced Plastic Subjected to Tensile and Bending Loads

    Article • Polymers, August 2022, MDPI AG

    Baciu Florin

  17. Aging of 3D Printed Polymers under Sterilizing UV-C Radiation

    Article • Polymers, December 2021, MDPI AG

    Baciu Florin

  18. The Effect of Disinfectants Absorption and Medical Decontamination on the Mechanical Performance of 3D-Printed ABS Parts

    Article • Polymers, December 2021, MDPI AG

    Baciu Florin

  19. Accelerated Aging Effect on Mechanical Properties of Common 3D-Printing Polymers

    Article • Polymers, November 2021, MDPI AG

    Baciu Florin

  20. Bending Fracture of Different Zirconia-Based Bioceramics for Dental Applications: A Comparative Study

    Article • Materials, November 2021, MDPI AG

    Baciu Florin

  21. Enhancing Mechanical Properties of Polymer 3D Printed Parts

    Article • Polymers, February 2021, MDPI AG

    Baciu Florin

  22. The Influence of 3D Printing Parameters on Elastic and Mechanical Characteristics of Polylactide

    Article • Materials Science Forum, June 2019, Trans Tech Publications

    Baciu Florin

  23. Influence of friction in compression testing of a chromoplastic polymer

    Article • IOP Conference Series Materials Science and Engineering, November 2018, Institute of Physics Publishing

    Baciu Florin

  24. FDM process parameters influence over the mechanical properties of polymer specimens: A review

    Article • Polymer Testing, August 2018, Elsevier

    Baciu Florin

  25. COMBINED STRESS ANALYSIS IN STEAM TURBINE BLADES

    Article • June 2018, STEF92 Technology

    Baciu Florin

  26. Determination of mechanical behavior of new biocomposites

    Article • January 2018, American Institute of Physics

    Baciu Florin

  27. Behaviour of Epoxy Silica Nanocomposites Under Static and Creep Loading

    Article • ACTA Universitatis Cibiniensis, December 2017, De Gruyter

    Prof. Dan M Constantinescu, Baciu Florin, Dragos Apostol

  28. COMPARATIVE STRESS ANALYSIS IN A HYDROELECTRIC GENERATOR POLE FIXATION

    Article • November 2017, STEF92 Technology

    Baciu Florin

  29. Finite Element Analysis of Mechanical Behavior of Restored Maxillary and Mandibular Deciduous Incisors

    Article • Key Engineering Materials, August 2017, Trans Tech Publications

    Baciu Florin

  30. MECHANICAL BEHAVIOR OF A SUPPORTING STRUCTURE OF A FREIGHT RAILROAD CAR

    Article • June 2017, STEF92 Technology

    Baciu Florin

  31. Analysis of discontinuities influence on the differences between static and dynamic elastic modulus of composite materials

    Article • January 2016, American Institute of Physics

    Baciu Florin

  32. Calculation of the relative uniformity coefficient on the green composites reinforced with cotton and hemp fabric

    Article • January 2016, American Institute of Physics

    Baciu Florin

  33. Influence of Technological Parameters on the Toughness Improvement of Microalloyed Steels

    Article • Materials Today Proceedings, January 2016, Elsevier

    Baciu Florin

  34. Validation of the numerical model of single-layer composites reinforced with carbon fiber and aramid

    Article • January 2016, American Institute of Physics

    Baciu Florin

  35. Reflection Photoelastic and Finite Element Residual Stress Analysis of a Torpedo Pot for Cast Iron

    Article • January 2016, DAAAM International

    Baciu Florin

  36. The effect of TiSiN interlayers on the bond strength of ceramic to NiCr and CoCr alloys

    Article • Ceramics International, July 2015, Elsevier

    Baciu Florin

  37. A Three-Dimensional Finite Element Analysis of Restored Deciduous Canine

    Article • Key Engineering Materials, March 2015, Trans Tech Publications

    Baciu Florin

  38. Stresses in a Bogie Frame of a Rail Carriage

    Article • Procedia Engineering, January 2015, Elsevier

    Baciu Florin

  39. Stainless Steel Brackets: In Vitro Corrosion Behaviour and Mechanical Debonding Test

    Article • Solid State Phenomena, August 2014, Trans Tech Publications

    Professor Mihai Tarcolea, Baciu Florin

  40. Comparative Study of the Biomechanical Behavior of the Deciduous Molar-restorative Material-bone Assembly

    Article • Procedia Engineering, January 2014, Elsevier

    Baciu Florin

  41. TiSiN Coatings for Improved Bond Strength of CoCr Alloy to Dental Ceramic

    Article • Key Engineering Materials, November 2013, Trans Tech Publications

    Professor Mihai Tarcolea, Baciu Florin