All Stories

  1. Synthesis and Properties of Polyarylene Ether Nitrile and Polyphenylene Sulfone Copolymers

    Article • Polymers, January 2026, MDPI AG

    Azamat A Zhansitov

  2. Effect of steam sterilization on the morphology and mechanical properties of polyphenylene sulfone hollow fiber membranes

    Article • Uchenye Zapiski Kazanskogo Universiteta Seriya Estestvennye Nauki, January 2026, Kazan Federal University

    Azamat A Zhansitov

  3. Magnetoelectric properties of PVDF-CoFe 2O 4 composite films obtained by 3D printing

    Article • Modern Electronic Materials, October 2025, Pensoft Publishers

    Azamat A Zhansitov

  4. Mechanical and magnetic properties of polylactide-cobalt ferrite nanocomposite for 3D printing

    Article • Materials Letters, March 2025, Elsevier

    Azamat A Zhansitov

  5. Powder casting of polyetheretherketone and polyphenylene sulfone: Sintering

    Article • Powder Technology, February 2025, Elsevier

    Azamat A Zhansitov

  6. Increasing the Permeability of Polyphenylene Sulfone Hollow Fiber Ultrafiltration Membranes by Switching the Polymer End Groups

    Article • Polymers, December 2024, MDPI AG

    Azamat A Zhansitov

  7. Influence of the chemical structure of terminal groups on the properties of ultrafiltration membranes from polyphenylene sulphone

    Article • Мембраны и Мембранные технологии, September 2024, The Russian Academy of Sciences

    Azamat A Zhansitov

  8. Photopolymerization-based 4D-printing of shape-memory materials containing high-performance polymers

    Article • Reactive and Functional Polymers, September 2024, Elsevier

    Azamat A Zhansitov

  9. The Rheology of Polyether Ether Ketone Concentrated Suspensions for Powder Molding and 3D Printing

    Article • Polymers, July 2024, MDPI AG

    Azamat A Zhansitov

  10. Influence of the Chemical Structure of Terminal Groups on the Properties of Poly(phenylene sulfone) Ultrafiltration Membranes

    Article • Membranes and Membrane Technologies, April 2024, Pleiades Publishing Ltd

    Azamat A Zhansitov

  11. Highly Permeable Ultrafiltration Membranes Based on Polyphenylene Sulfone with Cardo Fragments

    Article • Polymers, March 2024, MDPI AG

    Azamat A Zhansitov

  12. OPTIMIZATION OF POLYETHYLENE TEREPHTHALATE SYNTHESIS CONDITIONS AND THE INFLUENCE OF CATALYSTS ON ITS PROPERTIES

    Article • Bulletin of the Saint Petersburg State Institute of Technology (Technical University), January 2024, St Petersburg State Institute of Technology (Technical University)

    Azamat A Zhansitov

  13. Investigation of the Properties of Polyethylene and Ethylene-Vinyl Acetate Copolymer Blends for 3D Printing Applications

    Article • Polymers, October 2023, MDPI AG

    Azamat A Zhansitov

  14. Polyetherimide composite materials filled with dressed glass fibers

    Article • Russian Chemical Bulletin, June 2023, Springer Science + Business Media

    Azamat A Zhansitov

  15. Synthesis and Properties of Polysulfones for Fabricating Porous Hollow-Fiber Membranes

    Article • Membranes and Membrane Technologies, June 2023, Pleiades Publishing Ltd

    Azamat A Zhansitov

  16. Effect of Solvent and Monomer Ratio on the Properties of Polyphenylene Sulphone

    Article • Polymers, May 2023, MDPI AG

    Azamat A Zhansitov

  17. Properties of Polysulphones Synthetized for Forming of Porous Hollow-Fiber Membranes

    Article • Мембраны и Мембранные технологии, May 2023, The Russian Academy of Sciences

    Azamat A Zhansitov

  18. Effect of Molecular Weight and Chemical Structure of Terminal Groups on the Properties of Porous Hollow Fiber Polysulfone Membranes

    Article • Membranes, April 2023, MDPI AG

    Azamat A Zhansitov

  19. Synthesis and properties of polyetheretherketone for applications in additive technologies

    Article • Russian Chemical Bulletin, February 2023, Springer Science + Business Media

    Azamat A Zhansitov

  20. Effect of Composition and Viscosity of Spinning Solution on Ultrafiltration Properties of Polyphenylene Sulfone Hollow-Fiber Membranes

    Article • Membranes, November 2022, MDPI AG

    Azamat A Zhansitov

  21. Powdered aromatic polyetheretherketones and copolyetheretherketones

    Article • Plasticheskie massy, October 2022, Publishing House Plastic Ltd

    Azamat A Zhansitov

  22. Investigation of the Properties of Polyphenylene Sulfone Blends

    Article • Materials, September 2022, MDPI AG

    Azamat A Zhansitov

  23. Friction and Wear of Polyetheretherketone Samples With Different Melt Flow Indices

    Article • Journal of Tribology, December 2021, ASME International

    Azamat A Zhansitov

  24. Synthesis and Properties of Copolyphenylene Sulphones with Cardo Fragments

    Article • Polymers, October 2021, MDPI AG

    Azamat A Zhansitov

  25. Investigation of the Properties of Polyetheretherketone Blends and Carbon-Filled Composites Based on them

    Article • Key Engineering Materials, September 2021, Trans Tech Publications

    Azamat A Zhansitov

  26. New Polymer Composite Materials III

    Article • September 2021, Trans Tech Publications

    Azamat A Zhansitov

  27. Possible Ways to Improve Interphase Adhesion between Fiberglass and Polyphenylenesulfide

    Article • Key Engineering Materials, September 2021, Trans Tech Publications

    Azamat A Zhansitov

  28. Study of the Residual Length of Discrete Carbon Fibers in Polyetherimide Based Composites for 3D-Printing

    Article • Key Engineering Materials, September 2021, Trans Tech Publications

    Azamat A Zhansitov

  29. 3D-Printing Methods for Crystalline Polyetheretherketone

    Article • Key Engineering Materials, October 2020, Trans Tech Publications

    Azamat A Zhansitov

  30. Features of Formation of a Multifilament Yarn from Crystallizing and Amorphic High-Heat Resistant Thermoplastics

    Article • Key Engineering Materials, October 2020, Trans Tech Publications

    Azamat A Zhansitov

  31. Influence of Concentration of Carbon and Glass Fibers, Melt Viscosity, and Number of Extrusions on the Porosity of Composites Based on Polyphenylene Sulphone, Polyethyrimide and Polyphenylene Sulfide

    Article • Key Engineering Materials, October 2020, Trans Tech Publications

    Azamat A Zhansitov

  32. Investigation of the Effect of the Length and Content of Carbon Fibers on the Properties of Polyphenylene Sulfide

    Article • Key Engineering Materials, October 2020, Trans Tech Publications

    Azamat A Zhansitov

  33. Synthesis of Aromatic Polyether Ketones by Electrophilic Substitution

    Article • Key Engineering Materials, October 2020, Trans Tech Publications

    Azamat A Zhansitov

  34. The Effect of Sizing Additives for Carbon Fiber on the Mechanical Properties of Polyetherimide Composites

    Article • Key Engineering Materials, October 2020, Trans Tech Publications

    Azamat A Zhansitov

  35. New Polymer Composite Materials II

    Article • October 2020, Trans Tech Publications

    Azamat A Zhansitov

  36. The Effect of Modification on the Properties of Polyetherimide and Its Carbon-Filled Composite

    Article • Polymers, May 2020, MDPI AG

    Azamat A Zhansitov

  37. Thermal and Thermo-Oxidation Stability of Plasticized Fiber-Filled Composite Materials Based on Polyphenylene Sulfone

    Article • High Temperature, March 2020, Pleiades Publishing Ltd

    Azamat A Zhansitov

  38. Study of Thermo-Oxidative Transformations of Unstabilized and Stabilized Poly(ether ether ketone)

    Article • Polymer Science Series B, September 2019, Pleiades Publishing Ltd

    Azamat A Zhansitov

  39. New Polymer Composite Materials

    Article • August 2019, Trans Tech Publications

    Azamat A Zhansitov

  40. Investigation of Carbon Fiber/Polyphenylenesulfone Composites by Method of X-Ray Photoelectron Spectroscopy

    Article • Key Engineering Materials, August 2019, Trans Tech Publications

    Azamat A Zhansitov

  41. Plastification of Сarbon-Filled Polyetherimide

    Article • Key Engineering Materials, August 2019, Trans Tech Publications

    Azamat A Zhansitov

  42. Investigation of the Influence of Linear Dimensions and Concentration of Carbon and Glass Fibers on the Properties of Polyetherimide

    Article • Key Engineering Materials, August 2019, Trans Tech Publications

    Azamat A Zhansitov

  43. Synthesis and Research of Properties of Polyether Ether Ketone

    Article • Key Engineering Materials, August 2019, Trans Tech Publications

    Azamat A Zhansitov

  44. On Accelerated Testing of Stabilizers for High-Heat-Resistant Polymers

    Article • Key Engineering Materials, August 2019, Trans Tech Publications

    Azamat A Zhansitov

  45. METHODS FOR SYNTHESIS OF POLYETHERIMIDES

    Article • IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA, July 2019, Ivanovo State University of Chemistry and Technology

    Azamat A Zhansitov

  46. Effects of Length and Concentration of Carbon and Glass Fibers on Polyphenylene Sulfone Properties

    Article • Fibre Chemistry, January 2019, Springer Science + Business Media

    Azamat A Zhansitov

  47. Development of Composite Material Based on Polyphenylene Sulfone for 3D Printing

    Article • Fibre Chemistry, November 2018, Springer Science + Business Media

    Azamat A Zhansitov

  48. Influence of the Length and Concentration of Carbon and Glass Fibers on the Properties of Polyphenylene Sulfone

    Article • Fibre Chemistry, November 2018, Springer Science + Business Media

    Azamat A Zhansitov

  49. On the synthesis of polyphenylene sulfide and copolymers based on it by the reaction of nonequilibrium polycondensation

    Article • IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA, October 2018, Ivanovo State University of Chemistry and Technology

    Azamat A Zhansitov

  50. XIV International Scientific and Practical Conference "New Polymer Composite Materials"

    Article • October 2018, Trans Tech Publications

    Azamat A Zhansitov

  51. The influence of the 3D-printing technology on the physical and mechanical properties of polyphenylene sulfone

    Article • Rapid Prototyping Journal, October 2018, Emerald

    Azamat A Zhansitov

  52. Spectrophotometric Study of Complex Compounds of Polyacrylate and Polymethacrylate of Guanidine, and also of Composites on their Basis with Fe (II) Ions

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov, Залина Исупова

  53. Study of the Geometric Characteristics of Carbon Fiber Fillers on the Properties of Polyphenylene Sulfone

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov

  54. Investigation of the Influence of Fillers of Various Nature on the Properties of Polyether Sulfone and Determination of the Possibility of Using Composites on their Basis in 3D-Printing

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov

  55. Development of Composite Materials for 3d Printing on the Basis of Polyphenylenesulfone

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov

  56. Mechanical Properties of Samples of Polyphenylene Sulfone Obtained by the 3D-Printing Method

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov

  57. Methods for the Synthesis of Polyethereketone

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov

  58. Thermal Stability of Polyetherketones

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov

  59. Investigation of the Crystallization of Polyetherketones by the Differential Scanning Calorimetry Method

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov

  60. Study of the Effect of Processing Cycles on the Thermophysical Properties of Polyether Ether Ketone

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov

  61. Acrylate and Methacrylate Guanidine-Ionic Liquids for Dissolution of Cellulose

    Article • Materials Science Forum, October 2018, Trans Tech Publications

    Azamat A Zhansitov, Залина Исупова

  62. Study of Complexes of Polymethacrylate Guanidine with Magnesium Ions

    Article • Fibre Chemistry, May 2018, Springer Science + Business Media

    Azamat A Zhansitov

  63. Unimodal Nano-Sized Bentonite-E Modified by Organic Monomeric/Polymeric Methacrylic Acid Zwitterions

    Article • Fibre Chemistry, May 2018, Springer Science + Business Media

    Azamat A Zhansitov

  64. New Metal Complexes Derived from Guanidine-Containing Dialdehyde Cellulose

    Article • Fibre Chemistry, March 2018, Springer Science + Business Media

    Azamat A Zhansitov

  65. Synthesis and Properties of Polyetheretherketones for 3D Printing

    Article • Fibre Chemistry, March 2018, Springer Science + Business Media

    Azamat A Zhansitov

  66. SYNTHESIS AND PROPERTIES OF AROMATIC POLYESTERS WHITH CARDED FRAGMENTS

    Article • IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA, July 2017, Ivanovo State University of Chemistry and Technology

    Azamat A Zhansitov

  67. INVESTIGATION OF COMPLEX COMPOUNDS OF GUANIDINE ACRYLATE WITH MAGNESIUM IONS

    Article • IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA, June 2017, Ivanovo State University of Chemistry and Technology

    Azamat A Zhansitov

  68. Development of technology of polysulfone production for 3D printing

    Article • High Performance Polymers, April 2017, SAGE Publications

    Azamat A Zhansitov

  69. New method of investigation of polysulfone thermal destruction

    Article • Polymer Science Series B, March 2017, Pleiades Publishing Ltd

    Azamat A Zhansitov

  70. Magnetic polymer-silica composites as bioluminescent sensors for bilirubin detection

    Article • Materials Chemistry and Physics, November 2016, Elsevier

    Azamat A Zhansitov

  71. The Development of Fireproof Composite Materials Based on Polybutylene Terephthalate

    Article • September 2016, SAGE Publications

    Azamat A Zhansitov

  72. Investigating the Thermal and Thermophysical Properties of Composite Materials Based on Polyethylene Terephthalate and Superconcentrates of Layered Silicate Nanoparticles in Cyclic Butylene Terephthalate

    Article • July 2016, SAGE Publications

    Azamat A Zhansitov

  73. Investigation of the Structure and Thermal Properties of Composites Based on Polyethylene Terephthalate and Organoclay

    Article • June 2016, SAGE Publications

    Azamat A Zhansitov

  74. Modification of Peculiarities of Microcrystalline Cellulose (MCC) and Its Oxidized Form (Dialdehyde Cellulose DAC) Guanidine-Containing Monomers and Polymers of Vinyl and Diallyl Series

    Article • May 2015, Taylor & Francis

    Azamat A Zhansitov

  75. Synthesis and application of silica hybrids grafted with new guanidine-containing polymers as highly effective adsorbents for bilirubin removal

    Article • Colloid & Polymer Science, March 2015, Springer Science + Business Media

    Azamat A Zhansitov

  76. New Biologically Active Composite Materials on the Basis of Dialdehyde Cellulose

    Article • October 2014, Taylor & Francis

    Azamat A Zhansitov

  77. New biologically active composite materials on the basis of dialdehyde cellulose

    Article • January 2014, American Institute of Physics

    Azamat A Zhansitov

  78. New nanocomposites based on layered aluminosilicate and guanidine containing polyelectrolytes

    Article • January 2014, American Institute of Physics

    Azamat A Zhansitov