All Stories

  1. A Systematic Literature Review on AI-Driven Predictive Maintenance and Fault Detection in Aircraft Systems
  2. 3D Railway Modelling for Extending the Remaining Useful Life of a Bogie
  3. Technology-enabled coopetition: a pathway to sustainability for SMEs
  4. Switching Signals Analysis for Online Stator Fault Diagnosis in Asymmetrical Six-Phase Induction Motor Drives With Model Predictive Control
  5. Intelligent Optimization and Real-Time Control of Wireless Power Transfer for Electric Vehicles
  6. Dynamic Harmonic Suppression Using Virtual Voltage Vectors in Model Predictive Control for Six-Phase Motor Drives
  7. Deadbeat Model-Free Predictive Current Control of Six-Phase Induction Motors Based on a Recurrent Neural Network
  8. Open-Circuit Fault Tolerant Converter for a Four Phase Switched Reluctance Motor Drive
  9. Eccentricity Fault Diagnostic in Hexagon- and Double-Delta-Connected Symmetrical Six-Phase Induction Motors
  10. Power Switches Short-Circuit Faults Tolerant Converter for a Four-Phase Switched Reluctance Motor Drive
  11. Stator Fault Diagnostics in Asymmetrical Six-Phase Induction Motor Drives with Model Predictive Control Applicable During Transient Speeds
  12. Industry 4.0 Readiness Assessment – A Comparative Analysis of Portuguese and Brazilian Companies
  13. Rotor Slot Harmonics in the Alpha-Beta Current Modulus Signature of Symmetrical Six-Phase Induction Motors Fed by Unbalanced Voltages and With Stator and Eccentricity Faults
  14. Analysis of Greenhouse Gas Emissions Reduction Potential with Alternative Refrigerants for the Retrofit of Heat Pumps with Hydrofluorocarbons
  15. Analysis of Strategies for the Optimization and Maintenance of the Geothermal Potential Resources in a Spa Hotel
  16. Low-Cost Electrochemical Impedance Spectroscopy (EIS) Using an Open-Loop DC-DC Converter for Fuel Cells Application
  17. Enhancing Customer Experience Through IIoT-Driven Coopetition: A Service-Dominant Logic Approach in Networks
  18. Zero-Sequence Voltage Outperforms MCSA-STFT for a Robust Inter-Turn Short-Circuit Fault Diagnosis in Three-Phase Induction Motors: A Comparative Study
  19. Current Measurements via Orthogonal Coupling
  20. Energy Transfer Via Orthogonal Coupling
  21. Self-Demagnetization Effect of Monopolar Generator
  22. The Use of Line Impedance Symmetrical Components for Stator Faults Diagnostics in Symmetrical Six-Phase Induction Motors
  23. Low Complexity Model Predictive Control for Asymmetrical Six-Phase Motors
  24. Virtual-Vector-Based Model Predictive Control With Deadbeat Solution for Symmetrical Six-Phase Induction Motors
  25. Zero-Sequence Current Mitigation Using a Virtual Voltage Vector Solution for MPC in Symmetrical Six-Phase Electric Drives With Single-Star and Hexagon Winding Configurations
  26. Harnessing Technology to Drive Coopetition and Value Co-Creation: A Service-Dominant Perspective
  27. Systemic Approaches to Coopetition: Technology and Service Integration in Dynamic Ecosystems Among SMEs
  28. Engineering Business Solutions: Advancing SME Competitiveness Through IIoT-Driven Coopetition
  29. Industrial Internet of Things-Driven Coopetition Networks for SMEs
  30. Influence of Control Strategies on the Output Impedance of Grid-Connected LCL Inverters in the dq -Domain
  31. Optimization of Resonant Arrays for Dynamic Wireless Power Transfer Using Adaptive Termination
  32. Industry 4.0 in Portugal - Economic Sectors Maturity
  33. Survey on the use of BIM methodology for railway 3D modeling
  34. Enhancing customer satisfaction through IIoT-Enabled coopetition: Strategic insights and impacts
  35. Dynamic Wireless Power Transfer Optimization Using Adaptative Termination in Center-Fed Resonant Array
  36. Geothermal Resource Potential for Thermal Comfort and Pool Heating in a Hotel
  37. Ridge Regression Application for Fault Detection in Heat Pumps
  38. Enhancing Building Information Modeling Effectiveness Through Coopetition and the Industrial Internet of Things
  39. Statement of Peer Review
  40. Solid-State Circuit Breaker for the Protection of Multiple Loads
  41. Coopetition Networks for Small and Medium Enterprises: A Lifecycle Model Grounded in Service-Dominant Logic
  42. Efficient Predictive Control Strategy for EV Powertrains Based on Multiphase Motors Drives with Three-Level Inverters
  43. A Comparative Study of MCSA and ZSV-Based Methods for Diagnosing Inter-Turn Short-Circuit Faults in Induction Motors
  44. Advancements in Fault Diagnosis Techniques for Aluminum Capacitors Using STLSP and Autoencoder
  45. Assessment of the Integrity of Aluminum Electrolytic Capacitors Using a Logistic Regression Model
  46. Analysis and Non-Invasive Diagnostics of Bearing Faults in Three-Phase Induction Motors
  47. Designing the future of coopetition: An IIoT approach for empowering SME networks
  48. Assessment of nozzle performance in high-viscosity oil spray system for rectangular copper conductors
  49. Enhancing SME Competitiveness Through Coopetition Networks: A Service-Dominant Logic Approach
  50. Assessment of Aluminum Electrolytic Capacitors Health Status Through Signal-Based Techniques
  51. Enhanced DC-link Capacitors Failure Diagnosis for a Three-Phase Interleaved Converter, Using Hilbert Transform
  52. A Two-Phase Monopolar Generator
  53. An Improved Three-Phase Monopolar Generator
  54. An Improved Single-Phase Monopolar Generator
  55. Diagnosis of DC-DC Converter Semiconductor Faults Based on the Second-Order Derivative of the Converter Input Current
  56. Doubled Power Brushless Monopolar Generator
  57. Value Creation in Technology-Driven Ecosystems: Role of Coopetition in Industrial Networks
  58. Rethinking service blueprint for digital coopetition: A new framework for networked collaboration
  59. Enhancing operational scale in SMEs through coopetition: Insights from the Portuguese ornamental stone industry
  60. Prediction maintenance based on vibration analysis and deep learning — A case study of a drying press supported on a Hidden Markov Model
  61. Investigation Performance Characteristics of the Flat Fan Nozzle on the Oil Spray Cooling System
  62. Line-Start Permanent Magnet Synchronous Motors Stator Fault Diagnostics Immune to Unbalanced Supply Voltages
  63. Designing Coopetition Networks for SMEs: A Service-Dominant Logic Approach
  64. Advancing BIM and Sustainability with Coopetition: Evidence from the Portuguese Stone Industry
  65. Optimized Preventive Diagnostic Algorithm for Assessing Aluminum Electrolytic Capacitor Condition Using Discrete Wavelet Transform and Kalman Filter
  66. Abstracts of the 2nd International Electronic Conference on Machines and Applications
  67. A Solid-State Circuit Breaker Configuration with Reduced Energy Dissipation
  68. On the Effectiveness of Faulty DC Circuit Breakers
  69. Comparative analysis of four classification algorithms for fault detection of heat pumps
  70. Navigating the digital shift: a service blueprint for coopetition technology-enabled networks
  71. Design Science for Networks Designing: A Service-Dominant Logic Approach
  72. Stator Fault Diagnostics in Asymmetrical Six-phase Induction Motor Drives With Model Predictive Control under Transient Regimes
  73. Thermography Analysis of Photovoltaic- Thermal (PVT) Solar Collectors
  74. Voltage Model Predictive Control for Two-Switch Boost Buck Converters Applied to Fuel Cells in DC Microgrids
  75. Co-Opetition and the Industrial Internet of Things: A Strategic Framework for Operational Efficiency in the Portuguese Ornamental Stone Sector
  76. Exergy and Performance Analysis of Alternative Refrigerants with Lower GWP for the Retrofit of Heat Pumps with R410A
  77. Coopetition with the Industrial IoT: A Service-Dominant Logic Approach
  78. A Single-Phase Monopolar Generator
  79. Study of Brushless Generator with Multi-Pole Rotor for Direct-Drive Wind Turbines
  80. Stator Faults Diagnostics in Symmetrical Six-Phase Induction Motors Fed by a Three-Phase System
  81. Study of Molten Steel Level Sensor
  82. ANÁLISE COMPARATIVA DE BOMBAS DE CALOR AEROTÉRMICAS E GEOTÉRMICAS PARA A GESTÃO DE ATIVOS NO SISTEMA AVAC DE UM AMBIENTE CRÍTICO
  83. A Comprehensive Review on Condition Monitoring and Fault Diagnosis in Fuel Cell Systems: Challenges and Issues
  84. A Comprehensive Service Blueprint for Enhancing Coopetition Networks
  85. The Ocurrence of Faults in LCI Drive Systems and its Effects on the Power Supply Quality.
  86. Adaptative Termination and Control Algorithm for Resonant Arrays Used in Inductive Wireless Power Transfer Systems for Vehicle Charging
  87. A Novel DC Circuit Breaker with an Absorbing Branch Based on TVS Diodes
  88. Measuring the Performance of a Strategic Asset Management Plan through a Balanced Scorecard
  89. Field Oriented Control with Variable Switching Frequency for Symmetrical Six-Phase Induction Machines
  90. A Novel Online Open-Circuit Fault Diagnostics Strategy for Asymmetrical Six-Phase Induction Motor Drives
  91. Virtual Voltage Vectors Based Model Predictive Control for Symmetrical Six-Phase Induction Machines
  92. A New Machine Learning Based Approach for Aluminium Electrolytic Capacitors Health Status Monitoring
  93. A Two-Degree-of-Freedom PID Integral Super-Twisting Controller Based on Atom Search Optimizer Applied to DC-DC Interleaved Converters for Fuel Cell Applications
  94. Model-free predictive current control of Syn-RM based on time delay estimation approach
  95. A New Brushless Non-salient Pole Generator with Multi-pole Rotor for Direct-drive Wind Turbines
  96. A Brushless Reversed Monopolar Generator with Longitudinal Flux from Nonsalient Poles
  97. A Single-Phase Brushless 4 Slots-4 Poles Flux Switching Generator with Modular Rotor
  98. Machine Learning Based Method for Impedance Estimation and Unbalance Supply Voltage Detection in Induction Motors
  99. The Updated Scope of Machines
  100. Online Stator Fault Diagnostics and Performance Comparison of Stator Winding Configurations in Symmetrical Six-Phase Induction Motors
  101. Alpha-Beta Plane Current Modulus Slot Harmonics in Symmetrical Six-Phase Induction Motors Fed by Unbalanced Voltages and Under Stator Faults
  102. Experimental Investigation of High Viscosity on Oil Spray Cooling System with Hairpin Winding
  103. The Use of The Line Impedance Symmetrical Components for Stator Faults Detection and Location in Symmetrical Six-Phase Induction Motors
  104. Modeling, Simulation and Design of an AC-DC Power Supply
  105. Exergy Analysis of Aerothermal and Geothermal Heat Pumps in a Critical Environment Application
  106. Modelling, Simulation and Experimental Study of a Hybrid Photovoltaic-Thermal Collector (PVT)
  107. Stator Inter-Turn Short-Circuits Fault Diagnostics in Three-Phase Line-Start Permanent Magnet Synchronous Motors Fed by Unbalanced Voltages
  108. Output Current Control for Two-Switch Boost Buck Converters in Fuel Cell Applications for DC Microgrids
  109. Numerical and Experimental Study of a Photovoltaic-Thermal (PVT) Solar Collector
  110. A Novel Indicator-Based On-line Diagnosis Technique of Inter-Turn Short Circuit Faults in Asymmetrical Six-Phase Induction Machines, Adopting a Model Predictive Controller
  111. AC Loss Analysis Approaches for Hairpin Winding Configuration: Analytical, Hybrid Model, and FEA
  112. Advanced Fault-Detection Technique for DC-Link Aluminum Electrolytic Capacitors Based on a Random Forest Classifier
  113. A Novel Indicator-Based Online Diagnostics Technique of Interturn Short-Circuit Faults in Synchronous Reluctance Machines
  114. A review of fault diagnostics in heat pumps systems
  115. Online Diagnosis and Discrimination of Stator Faults in Six-Phase Induction Motors Based on Voltage Symmetrical Components
  116. Diagnostics and Fault Tolerance in DC–DC Converters and Related Industrial Electronics Technologies
  117. A New Brushless Generator with Nonsalient Poles
  118. A Brushless Monopolar Generator with Longitudinal Excitation from Nonsalient Poles
  119. A New Brushless Generator with Salient Poles
  120. Modeling of Symmetrical Six-Phase Induction Machines Under Stator Faults
  121. An Integrated Strategy for the Real-Time Detection and Discrimination of Stator Inter-Turn Short-Circuits and Converter Faults in Asymmetrical Six-Phase Induction Motors
  122. Enhanced Direct Torque Control of a Syn-RM, Using Adaptive Flux Observer, Including Magnetic Saturation and Iron Losses
  123. Guest Editorial Special Issue on Integrated Control and Modulation for Electric Drives
  124. A New DC Source for Experimental Use
  125. A Comparative Study of Brushless Non-salient Pole Monopolar Generators
  126. A New Rectifier for Industrial Use
  127. Predicting the Health Status of a Pulp Press Based on Deep Neural Networks and Hidden Markov Models
  128. Multilayer Ceramic Capacitors: An Overview of Failure Mechanisms, Perspectives, and Challenges
  129. Autonomous Electric-Vehicle Control Using Speed Planning Algorithm and Back-Stepping Approach
  130. Online Interturn Short-Circuit Fault Diagnosis in Induction Motors Operating Under Unbalanced Supply Voltage and Load Variations, Using the STLSP Technique
  131. The Oil Spray Cooling System of Automotive Traction Motors: The State of the Art
  132. Online Monitoring of Sensor Calibration Status to Support Condition-Based Maintenance
  133. Discrimination Between Eccentricity and Interturn Faults Using Current or Voltage-Reference Signature Analysis in Symmetrical Six-Phase Induction Machines
  134. Stator Faults Detection in Asymmetrical Six-Phase Induction Motor Drives with Single and Dual Isolated Neutral Point, Adopting a Model Predictive Controller
  135. An Integrated Strategy for the Real-Time Detection and Discrimination of Stator Inter-Turn Short-Circuits and Converter Faults in Asymmetrical Six-Phase Induction Motors
  136. A Review on Hybrid Circuit Breakers for DC Applications
  137. Heat Pumps Smart Asset Management Implementation Through Virtual Sensors
  138. Forecasting Steel Production in the World—Assessments Based on Shallow and Deep Neural Networks
  139. Improved GRU prediction of paper pulp press variables using different pre-processing methods
  140. Model Free Predictive Current Control Based on a Grey Wolf Optimizer for Synchronous Reluctance Motors
  141. Steady-State Thermal Modeling of Salient Pole Synchronous Generator
  142. Automatic Risk Assessment for an Industrial Asset Using Unsupervised and Supervised Learning
  143. A Simplified Model Predictive Control for Asymmetrical Six-Phase Induction Motors That Eliminates the Weighting Factor
  144. Buck-Boost DC-DC Converters for Fuel Cell Applications in DC Microgrids—State-of-the-Art
  145. Comparative Study of Single-Switch and Double-Switch Converter Topologies, Working on Dead-Zone Mode, for Fuel Cell Applications
  146. Hairpin Windings for Electric Vehicle Motors: Modeling and Investigation of AC Loss-Mitigating Approaches
  147. Model-Free Predictive Current Control of Synchronous Reluctance Motors Based on a Recurrent Neural Network
  148. Speed Estimation of Six-Phase Induction Motors, Using the Rotor Slot Harmonics
  149. Model-Free Predictive Control of Multilevel DC–DC Converters for Energy Storage Applications
  150. The New Type Brushless Generator
  151. Prediction of Sensor Values in Paper Pulp Industry Using Neural Networks
  152. Inter-Turn Short-Circuit Fault Detection in Synchronous Reluctance Machines, Based on Current Analysis
  153. Retrofit of a Heat Pump Unit
  154. Symmetrical Six-Phase Induction Motor Stator Faults Diagnostics Approach, Immune to Unbalanced Supply Voltage, Based on the Analysis of the Midpoint Electrical Potential of the Stator Star
  155. Simulation Tool to Evaluate Fault Diagnosis Techniques for DC-DC Converters
  156. Stator Faults Diagnostics, under Unbalanced Supply Voltage Conditions, in Symmetrical Six-phase Induction Motors Fed by a Three-phase System
  157. Comparison of Different Features and Neural Networks for Predicting Industrial Paper Press Condition
  158. Inter-Turn Short-Circuit Faults Diagnosis in Synchronous Reluctance Machines, Using the Luenberger State Observer and Current's Second-Order Harmonic
  159. Stator Faults Detection and Severity Evaluation in a Symmetrical Six-Phase Induction Motor with Single and Dual Isolated Neutral Point
  160. Maximizing Energy Transfer in Wireless Power Transfer Systems Using Maximum Power Point Tracking for In-Motion EV and PHEV Charging
  161. Multiple Open-Circuit Faults Diagnosis in Six-Phase Induction Motor Drives Using Stator Current Analysis
  162. Using Python for the Simulation of a Closed-Loop PI Controller for a Buck Converter
  163. Design of a Brushless Synchronous Generator with an Excitation Winding Located on the Stator
  164. On-Line Diagnostics of Electrolytic Capacitors in Fault-Tolerant LED Lighting Systems
  165. Short and long forecast to implement predictive maintenance in a pulp industry
  166. A Computationally Efficient Model Predictive Current Control of Synchronous Reluctance Motors Based on Hysteresis Comparators
  167. Asset Management and Energy Improvements in a Critical Environment – The Case of a University Bioterium
  168. An Active Fault-Tolerant Control Strategy for Current Sensors Failure for Induction Motor Drives Using a Single Observer for Currents Estimation and Axes Transformation
  169. Hairpin Windings Manufacturing, Design, and AC Losses Analysis Approaches for Electric Vehicle Motors
  170. A Computationally Efficient Model Predictive Control of Six-Phase Induction Machines Based on Deadbeat Control
  171. Thermal Modeling of a TEFC Synchronous Reluctance Motor
  172. Fault Detection and Condition Monitoring of PMSGs in Offshore Wind Turbines
  173. Comparing LSTM and GRU Models to Predict the Condition of a Pulp Paper Press
  174. AC Losses Analysis Approaches for Electric Vehicle Motors with Hairpin Winding Configuration
  175. Model-Free Predictive Control of Interleaved DC-DC Converters, Based on Ultra-Local Model, with Constant Switching Frequency
  176. Optimizing the Life Cycle of Physical Assets through an Integrated Life Cycle Assessment Method
  177. Three-Phase Induction Motors Online Protection against Unbalanced Supply Voltages
  178. Bearing Damage Analysis with Artificial Intelligence Algorithms
  179. The Impact of Current Distortions on the Measurement Accuracy of Insulation Control Systems for Galvanically Coupled Loads
  180. Comparative Performance Evaluation of Two LED Driver Architectures for Residential Lighting Applications
  181. Maintenance Prediction through Sensing Using Hidden Markov Models—A Case Study
  182. Enhanced and Computationally Efficient Model Predictive Flux and Power Control of PMSG Drives for Wind Turbine Applications
  183. A review of supercapacitors modeling, SoH, and SoE estimation methods: Issues and challenges
  184. Design, Analysis and Simulation of AC-DC Converters with Python
  185. Online Condition Monitoring of Electrolytic Capacitors in DC-DC Interleaved Boost Converters, Adopting a Model-Free Predictive Controller
  186. Anticipating Future Behavior of an Industrial Press Using LSTM Networks
  187. Estimation of Lithium-Ion Batteries State-Condition in Electric Vehicle Applications: Issues and State of the Art
  188. Robust Neural Control of the Dual Star Induction Generator Used in a Grid-Connected Wind Energy Conversion System
  189. Determination of Heat Transfer Coefficient from Housing Surface of a Totally Enclosed Fan-Cooled Machine during Passive Cooling
  190. Advances in Fault Diagnostics and Post‐Fault Operation of Electrical Drives
  191. Comprehensive survey and critical evaluation of the performance of state-of-the-art LED drivers for lighting systems
  192. On-Line Fault Diagnosis of DC-Link Electrolytic Capacitors in Boost Converters Using the STFT Technique
  193. Highly Accurate Software-Based Current Compensating Strategy for Fault-Tolerant Large-Scale LED Lighting Systems
  194. Dynamic Modes of a Brushless Doubly-Fed Generator for Wind Turbines
  195. Modeling of Symmetrical Six-Phase Induction Machines Under Stator Faults
  196. Wide Bandgap Semiconductor-Based Converters for EV and HEV Magnetically Coupled Resonant Wireless Power Transfer
  197. Current-Based Bearing Fault Diagnosis Using Deep Learning Algorithms
  198. Reliable Detection of Stator Interturn Faults of Very Low Severity Level in Induction Motors
  199. Regulated Step-Up Power Supplies: Design and Simulation
  200. Open‐switch fault diagnosis in voltage source inverters of PMSM drives using predictive current errors and fuzzy logic approach
  201. Open‐circuit fault‐tolerant operation of permanent magnet synchronous generator drives for wind turbine systems using a computationally efficient model predictive current control
  202. High-performance vector control without AC phase current sensors for induction motor drives: Simulation and real-time implementation
  203. Oil Spray Cooling with Hairpin Windings in High-Performance Electric Vehicle Motors
  204. Predictive Maintenance Tools – A Global Survey
  205. Corrections to “Opportunities and Challenges of Utilizing Additive Manufacturing Approaches in Thermal Management of Electrical Machines”
  206. Opportunities and Challenges of Utilizing Additive Manufacturing Approaches in Thermal Management of Electrical Machines
  207. Thermal Analysis of Low-Power Three-Phase Induction Motors Operating under Voltage Unbalance and Inter-Turn Short Circuit Faults
  208. On the risk of failure to prevent induction motors permanent damage, due to the short available time‐to‐diagnosis of inter‐turn short‐circuit faults
  209. Open-Circuit Fault Diagnosis and Fault-Tolerent Control Strategies for Interleaved Boost Converter
  210. Current sensors fault detection and tolerant control strategy for three-phase induction motor drives
  211. Optimizing the Life Cycle of Physical Assets – a Review
  212. Calibration and Certification of Industrial Sensors – a Global Review
  213. Performance Assessment of Two Alternative DC-DC Converter Topologies for EV Charging Applications
  214. A Single Method for Multiple IGBT, Current, and Speed Sensor Faults Diagnosis in Regenerative PMSM Drives
  215. Evolution and Development Prospects of Electric Propulsion Systems of Large Sea Ships
  216. Improving the Reliability of a Microprocessor-Controlled Electric Drive
  217. Production Optimization versus Asset Availability – a Review
  218. A novel trigeneration system driven by the geothermal and solar sources
  219. A Variable Speed Control of Permanent Magnet Synchronous Motor Without Current Sensors
  220. Power Electronics Design Methods and Automation in the Digital Era: Evolution of Design Automation Tools
  221. Design of a Wind Turbines Synchronous Generator, with Longitudinal Excitation from Permanent Magnets
  222. Stator Faults Modeling and Diagnostics of Line-Start Permanent Magnet Synchronous Motors
  223. Fault-Tolerant LED Lighting Systems Featuring Minimal Loss of Luminous Flux
  224. Diagnosis of Open-Switch and Current Sensor Faults in PMSM Drives Through Stator Current Analysis
  225. Fault-Tolerant Back-to-Back Converter for Direct-Drive PMSG Wind Turbines Using Direct Torque and Power Control Techniques
  226. Photovoltaic-thermal (PVT) technology: Review and case study
  227. Model-based Unified Technique for Identifying Severities of Stator Inter-turn and Rotor Broken Bar Faults in Squirrel Cage Induction Motors
  228. Reliable Detection of Very Low Severity Level Stator Inter-Turn Faults in Induction Motors
  229. Thermal Analysis of a Directly Grid-Fed Induction Machine With Floating Neutral Point, Operating Under Unbalanced Voltage Conditions
  230. Open-Circuit Fault Diagnosis and Fault Tolerant Operation of Interleaved DC–DC Boost Converters for Homes and Offices
  231. A Single Observer for Currents Estimation in Sensor’s Fault-Tolerant Control of Induction Motor Drives
  232. Fault-Tolerant LED Lighting Systems Featuring Minimal Loss of Luminous Flux
  233. Bearing Faults Classification Based on Variational Mode Decomposition and Artificial Neural Network
  234. Towards Advanced Diagnosis Recognition for Eccentricities Faults: Application on Induction Motor
  235. Novel Fault Tolerant DC-DC Converter Architecture for LED Lighting Systems Operating in DC Microgrids
  236. On-Line Inter-Turn Short-Circuit Fault Diagnosis in Switched Reluctance Motors
  237. Thermal Analysis of Synchronous Reluctance Machines – A Review
  238. Thermal Analysis of an Induction Motor Subjected to Inter-Turn Short-Circuit Failures in the Stator Windings
  239. Fault-tolerent Control strategy for dc-dc converter in Power Wind conversion System
  240. Practical implementation of H-infinity control for fuel cell-interleaved boost converter
  241. A robust phase-locked loop against fundamental frequency deviations and harmonic distortions
  242. Fault-Tolerant PMSG Direct-Drive Wind Turbines, using Vector Control Techniques with Reduced DC-Link Ratings
  243. Impact of the Fan Design and Rotational Direction on the Thermal Characteristics of Induction Motors
  244. Model Predictive Current Control of Synchronous Reluctance Motors, Including Saturation and Iron Losses
  245. On-Line Stator Fault Diagnosis in Line-Start Permanent Magnet Synchronous Motors
  246. Online Estimation of Aluminum Electrolytic-Capacitor Parameters Using a Modified Prony's Method
  247. A comprehensive survey on fault diagnosis and fault tolerance of DC-DC converters
  248. Mathematical Modelling and Simulation of a Directly Coupled Water Pumping System, Using a Photovoltaic-Fed Synchronous Reluctance Motor
  249. Performance Evaluation of Three Variable Speed AC Motor Drives Under Different Load Profiles
  250. Performance Evaluation of a Hybrid Thermal–Photovoltaic Panel
  251. Fault diagnosis in DC-DC converters using a time-domain analysis of the reference current error
  252. IGBTs and current sensors fault diagnosis in direct-drive PSMG wind turbine systems using adaptive thresholds
  253. Introducing the Filtered Park’s and Filtered Extended Park’s Vector Approach to detect broken rotor bars in induction motors independently from the rotor slots number
  254. A single fault diagnostics approach for power switches, speed sensors and current sensors in regenerative PMSM drives
  255. On-line stator fault diagnosis in switched reluctance motors
  256. Open-circuit fault diagnosis in interleaved DC-DC boost converters and reconfiguration strategy
  257. Bearing fault detection for drivetrains using adaptive filters based wavelet transform
  258. Detection and isolation of open-switch and current sensor faults in PMSM drives, through stator current analysis
  259. On-line estimation of aluminum electrolytic-capacitor parameters using a modified Prony's method
  260. Fault tolerant DC-DC converters in DC microgrids
  261. Unregulated AC-DC power supply under heavy load operation: Simulation and design
  262. A Robust Observer-Based Method for IGBTs and Current Sensors Fault Diagnosis in Voltage-Source Inverters of PMSM Drives
  263. Active and Reactive Power Spectra-Based Detection and Separation of Rotor Faults and Low-Frequency Load Torque Oscillations
  264. Comparing Power Transformer Turn-to-Turn Faults Protection Methods: Negative Sequence Component Versus Space-Vector Algorithms
  265. Guest Editorial Special Issue on Fault Diagnosis of Electric Machines, Power Electronics, and Drives
  266. A new space vector approach to detect stator faults in induction motors
  267. DC-DC converter fault diagnostic in PV system
  268. Development of a cloud-based system for remote monitoring of a PVT panel
  269. Development of an effective MPPT method suitable to a stand-alone, low-cost wind turbine system
  270. New technique for identifying bearing faults in three-phase induction motors
  271. Data-driven approach for dip voltage fault detection and identification based on grid current vector trajectory analysis
  272. Performance of a synchronous reluctance motor drive with a fault-tolerant three-level neutral point clamped inverter
  273. Energy management strategy of a propulsion system with supercapacitors for electric and hybrid vehicles
  274. Performance evaluation of a hybrid thermal-photovoltaic panel
  275. A reliable indicator to detect non-adjacent broken rotor bars severity in induction motors
  276. FDI based on Artificial Neural Network for Low-Voltage-Ride-Through in DFIG-based Wind Turbine
  277. Fault diagnosis in Electrical Systems
  278. Modeling, Simulation and Design of an AC-DC Power Supply
  279. The Use of the Modified Prony’s Method for Rotor Speed Estimation in Squirrel-Cage Induction Motors
  280. A DC motor fault detection, isolation and identification based on a new architecture Artificial Neural Network
  281. Fault Analysis of Three-Level NPC Inverters in Synchronous Reluctance Motor Drives
  282. The Use of a Modified Prony’s Method to Detect the Airgap-Eccentricity Occurrence in Induction Motors
  283. Comparative influence of adjacent and non-adjacent broken rotor bars on the induction motor diagnosis through MCSA and ZSC methods
  284. Performance evaluation of synchronous reluctance motor drives under inverter fault conditions
  285. Power Spectrum-Based Detection of Induction Motor Rotor Faults for Immunity to False Alarms
  286. Thorough investigation of the third current harmonic in delta-connected induction motors suffering from a stator inter-turn fault
  287. The use of the modified Prony's method for rotor speed estimation in squirrel cage induction motors
  288. The use of a modified Prony's method to detect the airgap-eccentricity occurrence in induction motors
  289. Comparing power transformer turn-to-turn faults protection methods: Negative sequence component versus space vector algorithms
  290. Comparative experimental investigation of broken bar fault detectability in induction motors
  291. Welcome message
  292. Open-circuit fault detection and diagnosis in pulse-width modulation voltage source inverters based on novel pole voltage approach
  293. Leakage Inductances Calculation for Power Transformers Interturn Fault Studies
  294. Voltage dip fault detection and identification based on Principal Component Analysis: Application to Wind Energy Conversion System
  295. The Use of a Modified Prony Method to Track the Broken Rotor Bar Characteristic Frequencies and Amplitudes in Three-Phase Induction Motors
  296. Multiple Open-Circuit Faults Diagnosis in Back-to-Back Converters of PMSG Drives for Wind Turbine Systems
  297. Converter Power Loss Analysis in a Fault-Tolerant Permanent-Magnet Synchronous Motor Drive
  298. Current vector trajectory analysis for dip voltage fault detection and identification: Application to wind generator turbine
  299. Dip fault detection and identification for wind conversion energy system
  300. Dip voltage fault detection and identification for wind generator turbine farm based on current vector trajectory analysis
  301. Comparative Experimental Investigation of the Broken Bar Fault Detectability in Induction Motors
  302. Modeling and Implementation of MTPA Control Strategy for SynRM Variable Speed Drives
  303. Fault diagnosis in non-isolated bidirectional half-bridge DC-DC converters
  304. Fault tolerant small wind power system for telecommunications with maximum power extraction
  305. Thermal evaluation of different drive train topologies for electric/hybrid vehicles
  306. Fault diagnosis in unidirectional non-isolated DC-DC converters
  307. A Voltage-Based Approach Without Extra Hardware for Open-Circuit Fault Diagnosis in Closed-Loop PWM AC Regenerative Drives
  308. Open-Circuit Fault Diagnosis in Interleaved DC–DC Converters
  309. The use of a modified Prony's method to track the broken rotor bars characteristic frequencies and amplitudes, in three-phase induction motors
  310. Power control of a small-scale standalone wind turbine for rural and remote areas electrification
  311. Modeling synchronous reluctance motors including saturation, iron losses and mechanical losses
  312. Stator Fault Diagnostics in Squirrel Cage Three-Phase Induction Motor Drives Using the Instantaneous Active and Reactive Power Signature Analyses
  313. A New Diagnostic Technique for Real-Time Diagnosis of Power Converter Faults in Switched Reluctance Motor Drives
  314. A Fault-Tolerant PMSG Drive for Wind Turbine Applications With Minimal Increase of the Hardware Requirements
  315. Induction Motors Broken Rotor Bars Diagnosis Through the Discrete Wavelet Transform of the Instantaneous Reactive Power Signal under Time-varying Load Conditions
  316. Fault-Tolerant PMSG Drive With Reduced DC-Link Ratings for Wind Turbine Applications
  317. A New Approach for Current Sensor Fault Diagnosis in PMSG Drives for Wind Energy Conversion Systems
  318. Induction motors airgap-eccentricity detection through the discrete wavelet transform of the apparent power signal under non-stationary operating conditions
  319. A Fault-Tolerant Direct Controlled PMSG Drive for Wind Energy Conversion Systems
  320. Modular hybrid storage system for renewable energy standalone power supplies
  321. Open-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications
  322. The use of the stator instantaneous complex apparent impedance signature analysis for discriminating stator winding faults and supply voltage unbalance in three-phase induction motors
  323. A New Algorithm for Real-Time Multiple Open-Circuit Fault Diagnosis in Voltage-Fed PWM Motor Drives by the Reference Current Errors
  324. Fault-tolerant converter for AC drives using vector-based hysteresis current control
  325. Fault-Tolerant Strategy for a Photovoltaic DC--DC Converter
  326. Influence of the positive sequence voltage on the derating of three-phase induction motors under voltage unbalance
  327. Gearbox fault detection by wavelet and spectrum analysis of the induction motor power
  328. Sensor and actuator fault detection and isolation based on artificial neural networks and fuzzy logic applicated on induction motor
  329. Recent advances in fault diagnosis by Park's vector approach
  330. A new diagnostic technique for real-time diagnosis of power converter faults in switched reluctance motor drives
  331. A fault-tolerant PMSG drive for wind turbine applications with minimal increase of the hardware requirements
  332. A Power Loss Measurement Method Applied to Static Power Converters
  333. Modeling and Characterization of Leakage Inductances for Transformer Winding Fault Studies
  334. Fault analysis of dual active bridge converters
  335. Standalone diesel-photovoltaic system with batteries and supercapacitors as energy storage components for telecommunications
  336. Fast fault detection, isolation and reconfiguration in fault-tolerant permanent magnet synchronous motor drives
  337. Efficiency evaluation of fault-tolerant operating strategies applied to three-phase permanent magnet synchronous motor drives
  338. Discriminating rotor cage faults and mechanical load oscillations in three-phase induction motors by the stator instantaneous complex apparent impedance
  339. Development of an On-board unit for the monitoring and management of an electric fleet
  340. A voltage-based approach for open-circuit fault diagnosis in voltage-fed SVM motor drives without extra hardware
  341. A new approach for current sensor fault diagnosis in PMSG drives for wind energy conversion systems
  342. Power Transformers’ Fault Diagnostics by Park’s Vector Approach
  343. Power conditioning supercapacitors in combination with batteries for stand-alone power systems
  344. Simulation and design of a photovoltaic roof for automotive applications
  345. A New Method for Power Converter Fault Diagnosis in SRM Drives
  346. Efficiency Analysis of Drive Train Topologies Applied to Electric/Hybrid Vehicles
  347. Discriminating the Simultaneous Occurrence of Three-Phase Induction Motor Rotor Faults and Mechanical Load Oscillations by the Instantaneous Active and Reactive Power Media Signature Analyses
  348. On-line fault detection of aluminium electrolytic capacitors, in step-down DC–DC converters, using input current and output voltage ripple
  349. Broken rotor bars diagnosis in an induction motor fed from a frequency converter: experimental research
  350. Application of parity space approach in fault detection of DC motors
  351. Application of Park's power components to the differential protection of three-phase transformers
  352. Experimental Analysis of a Standalone Renewable Energy Based Hybrid System
  353. Power Transformers Differential Protection Using the p-q Power Theory
  354. A New Fault Diagnosis Method and a Fault-Tolerant Switching Strategy for Matrix Converters Operating With Optimum Alesina-Venturini Modulation
  355. Extended Park's vector approach-based differential protection of three-phase power transformers
  356. A new methodology for the redesign of a switched reluctance motor winding
  357. Condition monitoring of electrolytic capacitors
  358. A New Approach for Real-Time Multiple Open-Circuit Fault Diagnosis in Voltage-Source Inverters
  359. Power conditioning and energy management in a renewable energy based hybrid system for telecommunications
  360. Control and optimisation of power consumption in Radio Base stations
  361. A genetic algorithm based battery model for Stand Alone Radio Base Stations powering
  362. Single power switch open-circuit fault diagnosis in voltage-fed PWM motor drives by the reference current errors
  363. Multiple open-circuit fault diagnosis in voltage-fed PWM motor drives using the current Park's Vector phase and the currents polarity
  364. Power transformers winding fault diagnosis by the on-load exciting current Extended Park's Vector Approach
  365. Comparison of distinct modulation techniques applied to PMSG drives for wind turbine applications under faulty operating conditions
  366. Analysis and Diagnosis of Open-Circuit Faults in Matrix Converters
  367. Experimental study of the effect of positive sequence voltage on the derating of induction motors under voltage unbalance
  368. Analysis of a railway power system based on four quadrant converters operating under faulty conditions
  369. Power converters analysis in a renewable energy based hybrid system with hydrogen storage
  370. Correction to “A Permeance-Based Transformer Model and Its Application to Winding Interturn Arcing Fault Studies” [Jul 10 1589-1598
  371. Comparison of Different Modulation Strategies Applied to PMSM Drives Under Inverter Fault Conditions
  372. A Very Simple Experimental Technique for Characterising and Diagnosing Electrolytic Capacitors
  373. Efficiency analysis of power converters for urban wind turbine applications
  374. New challenges in power conditioning for telecommunications
  375. Converters fault-diagnosis in PMSG drives for wind turbine applications
  376. Performance analysis of a PMSM drive for hybrid electric vehicles
  377. The role of information logistics and data warehousing in educational facilities asset management
  378. Power transformers behavior under the occurrence of inrush currents and turn-to-turn winding insulation faults
  379. Power converter fault diagnosis in SRM drives based on the DC Bus current analysis
  380. Influence of the positive sequence voltage on the temperature of three-phase induction motors
  381. Grid interface for a wind turbine-fuel cell system
  382. A new approach for real-time multiple open-circuit fault diagnosis in voltage source inverters
  383. A hybrid stand alone power system for telecom applications in minor islands
  384. An Online and Noninvasive Technique for the Condition Monitoring of Capacitors in Boost Converters
  385. Estimating aluminum electrolytic capacitors condition using a low frequency transformer together with a DC power supply
  386. A Permeance-Based Transformer Model and Its Application to Winding Interturn Arcing Fault Studies
  387. Power conditioning of an energy storage system for telecommunications
  388. A novel diagnostic method for single power switch open-circuit faults in voltage-fed PWM motor drives
  389. Simple Experimental Techniques to Characterize Capacitors in a Wide Range of Frequencies and Temperatures
  390. Asset Management of Portuguese Educational Facilities
  391. Hybrid Photovoltaic-Thermal Collectors: A Review
  392. Fuel cell-supercapacitor system for telecommunications
  393. Fuel Cell Systems for Telecommunications
  394. Faulty operation analysis of permanent magnet synchronous generator drives for wind turbine applications
  395. The Use of the Instantaneous-Reactive-Power Signature Analysis for Rotor-Cage-Fault Diagnostics in Three-Phase Induction Motors
  396. The partial average power as a fault diagnostic parameter applied to SRM drives
  397. State condition estimation of aluminum electrolytic capacitors used on the primary side of ATX power supplies
  398. Performance evaluation of DTC-SVM permanent magnet synchronous motor drives under inverter fault conditions
  399. Condition Monitoring of Metallized Polypropylene Film Capacitors in Railway Power Trains
  400. Modulated error voltages for the diagnosis of faults in matrix converters
  401. Using input current and output voltage ripple to estimate the output filter condition of switch mode DC/DC converters
  402. A Simple Offline Technique for Evaluating the Condition of Aluminum–Electrolytic–Capacitors
  403. Photovoltaic DC-DC converter for telecommunications energy systems
  404. Using a simple charge-discharge circuit to estimate capacitors equivalent circuit at their operating conditions
  405. Impact of inverter faults in the overall performance of permanent magnet synchronous motor drives
  406. Fault diagnosis on a pwm rectifier ac drive system with fault tolerance using the average current Park's Vector approach
  407. A new method for the detection and location of faults in matrix converters
  408. Uninterruptible energy production in standalone power systems for telecommunications
  409. Using a sinosoidal PWM to estimate the ESR of Aluminum electrolytic capacitors
  410. Supply current polar chart analysis of SRM drives under normal and faulty operating conditions
  411. An Economic Offline Technique for Estimating the Equivalent Circuit of Aluminum Electrolytic Capacitors
  412. A New Model-Based Technique for the Diagnosis of Rotor Faults in RFOC Induction Motor Drives
  413. Output error voltages - a first method to detect and locate faults in matrix converters
  414. An automatic technique to obtain the equivalent circuit of aluminum electrolytic capacitors
  415. Performance analysis of permanent magnet synchronous motor drives under inverter fault conditions
  416. Thermal evaluation of TEFC three-phase induction motors under different supply frequencies
  417. On-line fault diagnostics in operating three-phase induction motors by the active and reactive power media
  418. Mechanical fault detection in an elevator by remote monitoring
  419. Intermittent turn-to-turn winding faults diagnosis in power transformers by the on-load exciting current Park's Vector Approach
  420. Diagnosis of rotor faults in traction drives for railway applications
  421. A non-invasive technique for fault diagnosis of SMPS
  422. Fault tolerant control strategy of SRM drives
  423. The instantaneous reactive power approach for rotor cage fault diagnosis in induction motor drives
  424. The instantaneous power factor approach for rotor cage faults diagnosis in three-phase induction motors
  425. Thermal Performance of a Three-Phase Induction Motor Under Fault Tolerant Operating Strategies
  426. Remedial Operating Strategies for a 12-Pulse LCI Drive System
  427. Airgap-Eccentricity Fault Diagnosis, in Three-Phase Induction Motors, by the Complex Apparent Power Signature Analysis
  428. The occurrence of faults in permanent magnet synchronous motor drives an its effects on the power supply quality
  429. Airgap eccentricity fault diagnosis, in three-phase induction motors, using the instantaneous power factor signature analysis
  430. Buck Converter Simulation Technique Based on the Fourier Transform
  431. Using DFT to Obtain the Equivalent Circuit of Aluminum Electrolytic Capacitors
  432. PWM inverters for stand-alone single-phase high quality power generation
  433. Fault simulation technique for switch mode power supplies
  434. Using spectral analysis to determine the equivalent circuit of the output filter of DC-DC converters at their operating frequency
  435. Lifetime of Film Capacitors in Single-Phase Regenerative Induction Motor Drives
  436. ESR Estimation Method for DC/DC Converters Through Simplified Regression Models
  437. Using Newton-Raphson Method to Estimate the Condition of Aluminum Electrolytic Capacitors
  438. Rotor Cage Fault Diagnostics in Three-Phase Induction Motors, by the Instantaneous Non-Active Power Signature Analysis
  439. High Power Quality System with Fuel Cell Distributed Generation - Simulation and Tests
  440. An Online Technique for Estimating the Parameters of Passive Components in Non-Isolated DC/DC Converters
  441. Rotor Cage Fault Diagnostics in Three-Phase Induction Motors, by the Instantaneous Phase-Angle Signature Analysis
  442. Fault Indicators for the Diagnosis of Rotor Faults in FOC Induction Motor Drives
  443. The Use of Instantaneous Phase-Angle Signature Analysis for Airgap Eccentricity Diagnosis in Three-Phase Induction Motors
  444. Harmonic Analysis Based on Kalman Filtering and Prony's Method
  445. Parameter Estimation of a DC/DC Buck converter using a continuous time model
  446. A switch mode power supply simulation technique based in laplace transform
  447. Thermal Behavior of a Three-Phase Induction Motor Fed by a Fault-Tolerant Voltage Source Inverter
  448. Diagnosis of rotor faults in direct and indirect FOC induction motor drives
  449. An unified method for estimating the parameters of non-isolated DC/DC converters using continuous time models
  450. Fault-Tolerant Operating Strategies Applied to Three-Phase Induction-Motor Drives
  451. An Experimental Technique for Estimating the ESR and Reactance Intrinsic Values of Aluminum Electrolytic Capacitors
  452. Harmonic and Interharmonic Identification Based on Improved Prony's Method
  453. Diagnosis of Rotor Faults in Closed-Loop Induction Motor Drives
  454. Multiple Reference Frames Theory: A New Method for the Diagnosis of Stator Faults in Three-Phase Induction Motors
  455. Condition monitoring and diagnostics of twelve-pulse LCI drive systems
  456. DSP Implementation of the Multiple Reference Frames Theory for the Diagnosis of Stator Faults in a DTC Induction Motor Drive
  457. Bearing failures diagnosis in three-phase induction motors by extended Park's vector approach
  458. Thermal behaviour of a three-phase induction motor fed by a fault tolerant voltage source inverter
  459. Diagnosis of Stator Inter-Turn Short Circuits in DTC Induction Motor Drives
  460. Use of ESR to predict failure of output filtering capacitors in boost converters
  461. Remedial operating strategies for standard 3-phase induction motor drives
  462. Stator winding fault diagnosis in three-phase synchronous and asynchronous motors, by the extended Park's vector approach
  463. Rotor Cage Fault Diagnosis in Three-Phase Induction Motors by Extended Park's Vector Approach
  464. Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's vector approach
  465. The use of an unified diagnostic approach to predict the operating deterioration of three-phase induction motors
  466. Voltage source inverter fault diagnosis in variable speed AC drives, by Park's vector approach
  467. Semi-converter fault diagnosis in DC motor drives, by Park's vector approach
  468. Computer-aided detection of airgap eccentricity in operating three-phase induction motors by Park's vector approach
  469. An ESR Meter for High Frequencies
  470. Asset Management Characterization of the Portuguese Secondary School Buildings
  471. Converter fault diagnosis in variable speed DC drives, by Park's vector approach
  472. Continuous operation performance of faulty induction motor drives
  473. An Experimental Technique for Estimating the Aluminum Electrolytic Capacitor Equivalent Circuit, at High Frequencies
  474. Airgap eccentricity fault diagnosis, in three-phase induction motors, by the complex apparent power signature analysis
  475. Thermal Performance of a Three-Phase Induction Motor Under Fault Tolerant Operating Strategies
  476. Power supply quality analysis in a twelve-pulse LCI drive system under compensated fault-mode operation
  477. Power Supply Harmonic Filter Behaviour in a Twelve-Pulse LCI Drive System Under Power Converter Faults
  478. Performance analysis of three-phase induction motor drives under inverter fault conditions
  479. New developments in the diagnosis of faults in line-connected and direct torque controlled induction motors
  480. DSP implementation of the multiple reference frames theory for the diagnosis of stator faults in a DTC induction motor drive
  481. Analysis of SRM drives behaviour under the occurrence of power converter faults
  482. Voltage source inverter fault diagnosis in variable speed AC drives, by the average current Park's vector approach
  483. Predicting the level of airgap eccentricity in operating three-phase induction motors, by Park's vector approach
  484. Asymmetrical operation of a twelve-pulse LCI drive system with power converter faults
  485. Diagnosis of stator inter-turn short circuits in DTC induction motor drives
  486. Diagnosis of stator, rotor and airgap eccentricity faults in three-phase induction motors based on the multiple reference frames theory
  487. Remedial operating strategies for a twelve-pulse LCI drive system
  488. Stator winding fault diagnosis in three-phase synchronous and asynchronous motors, by the extended Park's vector approach
  489. Rotor cage fault diagnosis in three-phase induction motors by the total instantaneous power spectral analysis
  490. Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's Vector approach
  491. On-line condition monitoring of kinetic-electronic systems
  492. Computer aided detection of airgap eccentricity in operating three-phase induction motors, by Park's vector approach