All Stories

  1. Experimental and numerical studies of LSF truss floor-ceiling systems under standard fire conditions
  2. Prediction of Thermal Response of Burning Outdoor Vegetation Using UAS-Based Remote Sensing and Artificial Intelligence
  3. Experimental research on using diatomite aggregate in hollow masonry blocks for bushfire resistance
  4. Influence of Web-Perforated Cold-Formed Steel Studs on the Heat Transfer Properties of LSF External Walls
  5. Evaluating the performance of window shutters using experimental and numerical studies under flame zone exposure
  6. Improving the fire resistance of light steel floor–ceiling systems through enhanced materials and construction methods
  7. Enhancing Residential Building Safety: A Numerical Study of Attached Safe Rooms for Bushfires
  8. Effect of Bushfire Exposure on the Properties of Lightweight Aggregate Masonry Blocks
  9. Developing a Bushfire Resistant, Lightweight and Loadbearing Masonry Block Using Pumice Fine Aggregate
  10. Experimental and Numerical Studies of Window Shutters Under Bushfire Radiant Heat Exposure
  11. Modelling LiDAR-Based Vegetation Geometry for Computational Fluid Dynamics Heat Transfer Models
  12. Numerical modelling of LSF floors under fire conditions
  13. Numerical modelling and design of cold-formed steel battens subject to pull-out failures under bushfire conditions
  14. Fire tests of short-span LSF floor systems made of lipped channel joists
  15. Numerical modeling of external light gauge steel framed wall systems exposed to bushfire flame zone conditions
  16. Enhancing the fire resistance of light gauge steel framed floor-ceiling systems through external insulation
  17. Behaviour and design of CFS stud walls under both sides fire exposure
  18. Pull-out capacities of screw connections in thin steel battens exposed to bushfire conditions
  19. Numerical modelling and investigation of CFS built-up stud walls in fire
  20. Effects of External Architectural Features on the Performance of Buildings Under Wildfire Exposure Conditions
  21. Performance of External Light Steel Walls Lined with Steel Cladding Under Wildfire Exposure Conditions
  22. Heat Transfer Analysis of Full-Scale Safe Rooms Exposed to Bushfire Conditions
  23. Bushfire resistance of external light steel wall systems lined with fibre cement boards
  24. Predicting the behaviour of external steel walls under bushfire radiant heat conditions
  25. Bushfire Resistance of Lightweight Masonry Blocks Made with Diatomite Aggregate
  26. Full-scale tests of load-bearing LSF walls made of built-up CFS channel sections under fire conditions
  27. Evaluating the bushfire resistance of a safe room using full-scale experiments
  28. Bushfire-Resistant Lightweight Masonry Blocks with Expanded Perlite Aggregate
  29. Effects of insulation materials and their location on the fire resistance of LSF walls
  30. LiDAR-based Computational Fluid Dynamics heat transfer models for bushfire conditions
  31. Sequentially coupled structural modelling of LSF floor-ceiling systems
  32. Diatomaceous earth aggregates based composite masonry blocks for bushfire resistance
  33. Numerical study of LSF walls made of cold-formed steel hollow section studs in fire
  34. Fire tests of cold-formed steel walls made of hollow section studs
  35. Elevated temperature thermal properties of advanced materials used in LSF systems
  36. Fire resistance of LSF wall systems lined with different wallboards including bio-PCM mat
  37. Fire resistance of non-load bearing LSF walls with varying cavity depth
  38. Fire resistance of light gauge steel framed wall systems lined with PCM-plasterboards
  39. Behaviour of load bearing double stud LSF walls in fire
  40. Influence of cavity insulation on the fire resistance of light gauge steel framed walls
  41. Fire performance of load bearing LSF wall systems made of low strength steel studs
  42. Experimental study of non-load bearing light gauge steel framed walls in fire
  43. Fire design of LSF wall systems made of web-stiffened lipped channel studs
  44. Residual capacity of fire exposed light gauge steel frame walls
  45. Investigating the fire performance of LSF wall systems using finite element analyses
  46. Fire tests of Magnesium Oxide board lined light gauge steel frame wall systems
  47. Fire tests of non-load bearing light gauge steel frame walls lined with calcium silicate boards and gypsum plasterboards
  48. Energy-based time equivalent approach to determine the fire resistance ratings of light gauge steel frame walls exposed to realistic design fire curves
  49. THERMAL MODELLING OF LOAD BEARING COLD-FORMED STEEL FRAME WALLS UNDER REALISTIC DESIGN FIRE CONDITIONS
  50. Thermal Performance of Magnesium Oxide Wall Board Using Numerical Modelling
  51. Detrimental effects of plasterboard joints on the fire resistance of light gauge steel frame walls
  52. Fire design rules for load bearing cold-formed steel frame walls exposed to realistic design fire curves
  53. Experimental Study of Load-Bearing Cold-Formed Steel Walls Exposed to Realistic Design Fires
  54. Development of realistic design fire time-temperature curves for the testing of cold-formed steel wall systems
  55. Numerical modelling of load bearing light gauge steel frame wall systems exposed to realistic design fires
  56. Numerical studies of load bearing LSF walls under realistic design fire conditions
  57. Finite Element Modelling of Load Bearing Steel Stud Walls under Real Building Fires