All Stories

  1. Explainable machine learning and physics-constrained optimization of chalcogen catalysts for sustainable hydrogen production
  2. From Prediction to Insight: Explainable Ensemble Learning for CO2-to-Methanol Conversion
  3. Assessing the Importance of Factors Affecting Steam Gasification Efficiency from Eucalyptus Wood: Uncertainty-Aware Machine Learning and Sobol Indices
  4. Performance and emission characteristics of compression ignition engines fueled with oxyhydrogen (HHO): Integrated prognostic and optimization framework
  5. Methanol for decarbonization of the maritime sector: From ideological strategy to practical solutions
  6. Booms and skimmers for oil spill recovery: Perspective analysis from lab scale to practical applications
  7. Integrating methane partial oxidation and thermoelectric generation in a Swiss-roll reactor: Hydrogen and electricity dual production and life cycle assessment
  8. Machine learning and simulated annealing/Moth-flame based prediction-optimization for improving ultrasonication-assisted co-anaerobic digestion
  9. Turning waste into energy: Application of machine learning and explainable artificial intelligence for determining key factors in wastewater-to-hydrogen conversion
  10. Carbon-based flexible thermoelectric generators enhanced by dual-elastomer design, AI prediction, and life cycle optimization
  11. Transparent artificial intelligence models using sequential minimal optimization and extreme Gradient Boosting for accurate performance prediction of solar farms
  12. Data-Driven Hybrid Approach Using Hyperparameter-Optimized Ensemble and Explainable Machine Learning for Assessing Pyrolysis Efficiency of Waste Tires
  13. Binary energy system for hydrogen and biochar production by integrating methanol partial oxidation and bamboo pyrolysis with life cycle analysis
  14. Combining Babool wood-derived producer gas and hydrogen with biodiesel as efficient strategies for dual-fuel diesel engine in advancing sustainable energy
  15. An integrated framework for bio-hydrogen production optimization using novel metaheuristic algorithms and explainable machine learning tuned via grid search
  16. Explainable machine learning-based prediction of fuel consumption in ship main engines using operational data
  17. Towards Sustainable Development Goals: Application of Hydrogen‐Enriched Mahua Biodiesel/Diesel Blend to Dual‐Fuel Diesel Engine
  18. Sustainable transformation to carbon neutrality: Obstacles and solutions
  19. Comprehensive investigation on performance and emission of dual-fuel diesel engine fuelled with biodiesel and hydrogen using D-optimal design and desirability-based multi-attribute optimization
  20. Potential Waste‐to‐Wealth Strategy for Combining Medical Surgical Gloves‐Derived Pyrolysis Oil with Pentanol and Nanoparticles: Experimental Analysis on Engine Behaviors
  21. Dual-fuel diesel engine features powered by ammonia under various pilot-fuel injection timing: Comprehensive analysis and response surface methodology-based optimization
  22. Comprehensive analysis of waste-to-hydrogen technologies integrated with circular economy principles: Potential and challenges
  23. Mitigating backfire occurrence in HHO-gasoline plug-in hybrid motorcycle engine
  24. Thermodynamic and emission analysis of waste plastic oil fuelled diesel engine with Ce-Al catalyst-based catalytic converters – An experimental study
  25. Economic-environmental analysis of solar-wind-biomass hybrid renewable energy system for hydrogen production: A case study in Vietnam
  26. Internet of things-driven approach integrated with explainable machine learning models for ship fuel consumption prediction
  27. Synergetic strategy: upgrading fuel properties of waste starch composite fuels by blending torrefied spent coffee grounds
  28. A comprehensive analysis of energy, exergy, performance, and emissions of a spark-ignition engine running on blends of gasoline, ethanol, and isoamyl alcohol
  29. Enhancing the performance of syngas-diesel dual-fuel engines by optimizing injection regimes: From comparative analysis to control strategy proposal
  30. Operation parameter interaction and optimization of vertical axis wind turbine analyzed by Taguchi method with modified additive model and ANOVA
  31. Waste-to-energy power plants: Multi-objective analysis and optimization of landfill heat and methane gas by recirculation of leachate
  32. Optimization of a unileg thermoelectric generator by the combination of Taguchi method and evolutionary neural network for green power generation
  33. Subsidy policy or dual-credit policy? Evolutionary game analysis of green methanol vehicles promotion
  34. A comprehensive study of artificial neural network for sensitivity analysis and hazardous elements sorption predictions via bone char for wastewater treatment
  35. A comprehensive analysis of the emerging modern trends in research on photovoltaic systems and desalination in the era of artificial intelligence and machine learning
  36. Potential of Explainable Artificial Intelligence in Advancing Renewable Energy: Challenges and Prospects
  37. A review of noncatalytic and catalytic pyrolysis and co-pyrolysis products from lignocellulosic and algal biomass using Py-GC/MS
  38. Lignocellulosic biofuel properties and reactivity analyzed by thermogravimetric analysis (TGA) toward zero carbon scheme - A critical review
  39. Metal oxide-based electrochemical sensors for pesticide detection in water and food samples: a review
  40. Nanocomposite from tannery sludge-derived biochar and Zinc oxide nanoparticles for photocatalytic degradation of Bisphenol A toward dual environmental benefits
  41. Correction: Numerical assessment of polyoxymethylene dimethyl ether (OME3) injection timing in compression ignition engine
  42. Thermodynamic and exergoenvironmental assessments of solar-assisted combined power cycle using eco-friendly fluids
  43. Technological solutions for boosting hydrogen role in decarbonization strategies and net-zero goals of world shipping: Challenges and perspectives
  44. Numerical assessment of polyoxymethylene dimethyl ether (OME3) injection timing in compression ignition engine
  45. Effects of material doping on the performance of thermoelectric generator with/without equal segments
  46. Precise Prediction of Biochar Yield and Proximate Analysis by Modern Machine Learning and SHapley Additive exPlanations
  47. Strategic combination of waste plastic/tire pyrolysis oil with biodiesel for natural gas-enriched HCCI engine: Experimental analysis and machine learning model
  48. Green hydrogen economy: Prospects and policies in Vietnam
  49. Investigating the influence of plastic waste oils and acetone blends on diesel engine combustion, pollutants, morphological and size particles: Dehalogenation and catalytic pyrolysis of plastic waste
  50. Investigation of thermodynamic and kinetic parameters of Albizia lebbeck seed pods using thermogravimetric analysis
  51. Wear Mechanisms Analysis and Friction Behavior of Anodic Aluminum Oxide Film 5083 under Cyclic Loading
  52. High efficient COVID-19 waste co-pyrolysis char/TiO2 nanocomposite for photocatalytic reduction of Cr(VI) under visible light
  53. Tetracycline-adsorbed biochar for solid biofuel usage to achieve waste utilization for environmental sustainability
  54. Waste to fuel: Synergetic effect of hybrid nanoparticle usage for the improvement of CI engine characteristics fuelled with waste fish oils
  55. Environmental pollution mitigation through utilization of carbon dioxide by microalgae
  56. Multi-objective particle swarm optimization applied to a solar-geothermal system for electricity and hydrogen production; Utilization of zeotropic mixtures for performance improvement
  57. Steam explosion as sustainable biomass pretreatment technique for biofuel production: Characteristics and challenges
  58. Intelligent approaches for sustainable management and valorisation of food waste
  59. A review of biowaste remediation and valorization for environmental sustainability: Artificial intelligence approach
  60. Multiple-objective optimization on ammonia decomposition using membrane reactor
  61. A feasible and promising approach for diesel engine fuelled with a blend of biodiesel and low-viscosity Cinnamon oil: A comprehensive analysis of performance, combustion, and exergy
  62. Emerging trends in role and significance of biochar in gaseous biofuels production
  63. Microalgae bio-oil production by pyrolysis and hydrothermal liquefaction: Mechanism and characteristics
  64. Poultry fat biodiesel as a fuel substitute in diesel-ethanol blends for DI-CI engine: Experimental, modeling and optimization
  65. Application of Taguchi design in optimization of performance and emissions characteristics of n-butanol/diesel/biogas under dual fuel mode
  66. Collective influence and optimization of 1-hexanol, fuel injection timing, and EGR to control toxic emissions from a light-duty agricultural diesel engine fueled with diesel/waste cooking oil methyl ester blends
  67. Using Pithecellobium Dulce seed-derived biodiesel combined with Groundnut shell nanoparticles for diesel engines as a well-advised approach toward sustainable waste-to-energy management
  68. Effects of Acetone-Butanol-Ethanol (ABE) addition on HCCI-DI engine performance, combustion and emission
  69. Application of machine learning and Box-Behnken design in optimizing engine characteristics operated with a dual-fuel mode of algal biodiesel and waste-derived biogas
  70. A critical and systematic review of sustainable hydrogen production from ethanol/bioethanol: Steam reforming, partial oxidation, and autothermal reforming
  71. Flexible syngas-biogas-hydrogen fueling spark-ignition engine behaviors with optimized fuel compositions and control parameters
  72. Smart and Sustainable Technologies in energy transition
  73. Thermochemical conversion of large-size woody biomass for carbon neutrality: Principles, applications, and issues
  74. Utilization of nanomaterials in accelerating the production process of sustainable biofuels
  75. Hydrogen Production by Water Splitting with Support of Metal and Carbon-Based Photocatalysts
  76. Microalgal biofuel production: Potential challenges and prospective research
  77. Perovskite solar cells: Thermal and chemical stability improvement, and economic analysis
  78. Experimental investigation on simultaneous production of bioethanol and biodiesel from macro-algae
  79. Triple-objective optimization and electrochemical/technical/environmental study of biomass gasification process for a novel high-temperature fuel cell/electrolyzer/desalination scheme
  80. Pyrolysis of lignocellulosic, algal, plastic, and other biomass wastes for biofuel production and circular bioeconomy: A review of thermogravimetric analysis (TGA) approach
  81. Review of artificial neural networks for gasoline, diesel and homogeneous charge compression ignition engine
  82. Hydrothermal carbonization of food waste as sustainable energy conversion path
  83. Nanomaterials as a sustainable choice for treating wastewater
  84. Production of biochar from crop residues and its application for anaerobic digestion
  85. Strategies to improve membrane performance in wastewater treatment
  86. Threats, challenges and sustainable conservation strategies for freshwater biodiversity
  87. A comparative analysis of biomass torrefaction severity index prediction from machine learning
  88. Energy-saving drying strategy of spent coffee grounds for co-firing fuel by adding biochar for carbon sequestration to approach net zero
  89. Thermal performance assessment of an ejector air-conditioning system with parabolic trough collector using R718 as a refrigerant: A case study in Algerian desert region
  90. Understanding behaviors of compression ignition engine running on metal nanoparticle additives-included fuels: A control comparison between biodiesel and diesel fuel
  91. Role of hydrogen in improving performance and emission characteristics of homogeneous charge compression ignition engine fueled with graphite oxide nanoparticle-added microalgae biodiesel/diesel blends
  92. Remediation of heavy metal polluted waters using activated carbon from lignocellulosic biomass: An update of recent trends
  93. Experimental assessment on characteristics of premixed charge compression ignition engine fueled with multi-walled carbon nanotube-included Tamanu methyl ester
  94. Integration of phase change materials in improving the performance of heating, cooling, and clean energy storage systems: An overview
  95. Multi-objective optimization of diesel engine performance and emission using grasshopper optimization algorithm
  96. Optimization Model to Manage Ship Fuel Consumption and Navigation Time
  97. Techno-economic and environmental evaluation of photovoltaic-thermal collector design with pork fat as phase change material
  98. Application of novel framework based on ensemble boosted regression trees and Gaussian process regression in modelling thermal performance of small-scale Organic Rankine Cycle (ORC) using hybrid nanofluid
  99. Evaluation of oxidation stability and engine behaviors operated by Prosopis juliflora biodiesel/diesel fuel blends with presence of synthetic antioxidant
  100. RETRACTED: Exploration over combined impacts of modified piston bowl geometry and tert-butyl hydroquinone additive-included biodiesel/diesel blend on diesel engine behaviors
  101. Forecasting of future greenhouse gas emission trajectory for India using energy and economic indexes with various metaheuristic algorithms
  102. Optimizing operation parameters of a spark-ignition engine fueled with biogas-hydrogen blend integrated into biomass-solar hybrid renewable energy system
  103. SiO2/TiO2 nanolayer synergistically trigger thermal absorption inflammatory responses materials for performance improvement of stepped basin solar still natural distiller
  104. Using response surface methodology approach for optimizing performance and emission parameters of diesel engine powered with ternary blend of Solketal-biodiesel-diesel
  105. Interfacial-engineered CoTiO3-based composite for photocatalytic applications: a review
  106. Perspective review on Municipal Solid Waste-to-energy route: Characteristics, management strategy, and role in circular economy
  107. Recent advances in bio-inspired multifunctional coatings for corrosion protection
  108. Numerical investigation on melting and energy storage density enhancement of phase change material in a horizontal cylindrical container
  109. Recent Advances in Machine Learning Research for Nanofluid-Based Heat Transfer in Renewable Energy System
  110. Energy-related approach for reduction of CO2 emissions: A critical strategy on the port-to-ship pathway
  111. Emerging potential of spent coffee ground valorization for fuel pellet production in a biorefinery
  112. Biofuel production from microalgae: challenges and chances
  113. Comparative evaluation of AI ‐based intelligent GEP and ANFIS models in prediction of thermophysical properties of ...
  114. Experimental evaluation over the effects of natural antioxidants on oxidation stability of binary biodiesel blend
  115. Biomass-derived biochar: From production to application in removing heavy metal-contaminated water
  116. Recent advances in computational fluid dynamics (CFD) modelling of photobioreactors: Design and applications
  117. Grasshopper optimization algorithm for diesel engine fuelled with ethanol-biodiesel-diesel blends
  118. Catalyst-Based Synthesis of 2,5-Dimethylfuran from Carbohydrates as a Sustainable Biofuel Production Route
  119. Optimization of a vertical axis wind turbine with a deflector under unsteady wind conditions via Taguchi and neural network applications
  120. Energy‐related clean and green framework for shipbuilding community towards zero‐emissions: A strategic analysis from concept to case study
  121. Response surface optimization of microalgae microbial fuel cell (MMFC) enhanced by yeast immobilization for bioelectricity production
  122. Microbial fuel cells for bioelectricity production from waste as sustainable prospect of future energy sector
  123. Microalgae and Macroalgae for Third-Generation Bioethanol Production
  124. Characteristics of hydrogen production from steam gasification of plant-originated lignocellulosic biomass and its prospects in Vietnam
  125. Experimental assessment on performance and combustion behaviors of reactivity-controlled compression ignition engine operated by n-pentanol and cottonseed biodiesel
  126. Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review
  127. Influence of injection timing on performance and combustion characteristics of compression ignition engine working on quaternary blends of diesel fuel, mixed biodiesel, and t-butyl peroxide
  128. Liquid hot water as sustainable biomass pretreatment technique for bioenergy production: A review
  129. A Critical and Systematic Review of Sustainable Hydrogen Production from Ethanol/Bioethanol: Steam Reforming, Partial Oxidation, and Autothermal Reforming
  130. Progress on the lignocellulosic biomass pyrolysis for biofuel production toward environmental sustainability
  131. Performance evaluation and improvement of thermoelectric generators (TEG): Fin installation and compromise optimization
  132. Experimental analysis of performance and emission of a turbocharged diesel engine operated in dual-fuel mode fueled with bamboo leaf-generated gaseous and waste palm oil biodiesel/diesel fuel blends
  133. A technical review on composite phase change material based secondary assisted battery thermal management system for electric vehicles
  134. Integrated biorefineries, circular bio-economy, and valorization of organic waste streams with respect to bio-products
  135. Energy storage onboard zero-emission two-wheelers: Challenges and technical solutions
  136. A review on application of artificial neural network (ANN) for performance and emission characteristics of diesel engine fueled with biodiesel-based fuels
  137. Acid-based lignocellulosic biomass biorefinery for bioenergy production: Advantages, application constraints, and perspectives
  138. Efficiency improvement of a vertical-axis wind turbine using a deflector optimized by Taguchi approach with modified additive method
  139. Insight into the recent advances of microwave pretreatment technologies for the conversion of lignocellulosic biomass into sustainable biofuel
  140. 2-Methylfuran (MF) as a potential biofuel: A thorough review on the production pathway from biomass, combustion progress, and application in engines
  141. Experimental investigation of solar energy-based water distillation using inclined metal tubes as collector and condenser
  142. Mission, challenges, and prospects of renewable energy development in Vietnam
  143. Advanced super-hydrophobic polymer-based porous absorbents for the treatment of oil-polluted water
  144. Implementation of phase change materials for thermal regulation of photovoltaic thermal systems: Comprehensive analysis of design approaches
  145. Hydrogen-Enriched Biogas Premixed Charge Combustion and Emissions in Direct Injection and Indirect Injection Diesel Dual Fueled Engines: A Comparative Study
  146. Application of the Internet of Things in 3E (efficiency, economy, and environment) factor-based energy management as smart and sustainable strategy
  147. Combustion behavior, performance and emission characteristics of diesel engine fuelled with biodiesel containing cerium oxide nanoparticles: A review
  148. Impacts of COVID-19 pandemic on the global energy system and the shift progress to renewable energy: Opportunities, challenges, and policy implications
  149. Integrating renewable sources into energy system for smart city as a sagacious strategy towards clean and sustainable process
  150. Smart control strategy for effective hydrocarbon and carbon monoxide emission reduction on a conventional diesel engine using the pooled impact of pre-and post-combustion techniques
  151. Oil spill cleanup by raw cellulose-based absorbents: a green and sustainable approach
  152. Influence of Various Basin Types on Performance of Passive Solar Still: A Review
  153. Experimental investigation of novel hybrid phase change materials
  154. Use of Biodiesel Fuels in Diesel Engines
  155. COVID-19 and the Global Shift Progress to Clean Energy
  156. Sorbent-based devices for the removal of spilled oil from water: a review
  157. Biomass-derived 2,5-dimethylfuran as a promising alternative fuel: An application review on the compression and spark ignition engine
  158. Influence of fish oil and waste cooking oil as post mixed binary biodiesel blends on performance improvement and emission reduction in diesel engine
  159. Soft computing-based modeling and emission control/reduction of a diesel engine fueled with carbon nanoparticle-dosed water/diesel ‎emulsion fuel
  160. An analysis and review on the global NO 2 emission during lockdowns in COVID-19 period
  161. Combustion and emission characteristics of spark and compression ignition engine fueled with 2,5-dimethylfuran (DMF): A comprehensive review
  162. Numerical and experimental evaluation on the pooled effect of waste cooking oil biodiesel/diesel blends and exhaust gas recirculation in a twin-cylinder diesel engine
  163. 2,5-Dimethylfuran (DMF) as a promising biofuel for the spark ignition engine application: A comparative analysis and review
  164. Prospective review on the application of biofuel 2,5-dimethylfuran to diesel engine
  165. Synthesis pathway and combustion mechanism of a sustainable biofuel 2,5-Dimethylfuran: Progress and prospective
  166. Thermal constant analysis of phase change nanocomposites and discussion on selection strategies with respect to economic constraints
  167. Record decline in global CO 2 emissions prompted by COVID-19 pandemic and its implications on future climate change policies
  168. Effect of Poly-Alkylene-Glycol Quenchant on the Distortion, Hardness, and Microstructure of 65Mn Steel
  169. Rice bran oil-based biodiesel as a promising renewable fuel alternative to petrodiesel: A review
  170. Thermodynamic Simulation on the Change in Phase for Carburizing Process
  171. Optimizing Operation Parameters of a Spark-Ignition Engine Fueled with Biogas-Hydrogen Blend in Hybrid Renewable Energy System Working on Solar and Biomass
  172. Characteristics of PM and soot emissions of internal combustion engines running on biomass-derived DMF biofuel: a review
  173. A review on ignition delay times of 2,5-Dimethylfuran
  174. A remarkable review of the effect of lockdowns during COVID-19 pandemic on global PM emissions
  175. An Experimental Study on the Performance Characteristics of a Diesel Engine Fueled with ULSD-Biodiesel Blends
  176. A state-of-the-art review on emission characteristics of SI and CI engines fueled with 2,5-dimethylfuran biofuel
  177. Flame Characteristics and Ignition Delay Times of 2,5-Dimethylfuran: A Systematic Review With Comparative Analysis
  178. A Review on the Performance, Combustion, and Emission Characteristics of Spark-Ignition Engine Fueled With 2,5-Dimethylfuran Compared to Ethanol and Gasoline
  179. The electric propulsion system as a green solution for management strategy of CO 2 emission in ocean shipping: A comprehensive review
  180. Learned experiences from the policy and roadmap of advanced countries for the strategic orientation to electric vehicles: A case study in Vietnam
  181. Synthesis of activated carbon monolith derived from cocoa pods for supercapacitor electrodes application
  182. Critical review on the characteristics of performance, combustion and emissions of PCCI engine controlled by early injection strategy based on narrow-angle direct injection (NADI)
  183. A simulation study on a port-injection SI engine fueled with hydroxy-enriched biogas
  184. Performance and combustion characteristics of a retrofitted CNG engine under various piston-top shapes and compression ratios
  185. Endless story about the alarming reality of plastic waste in Vietnam
  186. Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition
  187. Scrap tire pyrolysis as a potential strategy for waste management pathway: a review
  188. Aalyzing and selecting the typical propulsion systems for ocean supply vessels
  189. The Flywheel Energy Storage System: An Effective Solution to Accumulate Renewable Energy
  190. Applicability of fuel injection techniques for modern diesel engines
  191. A study on a solution to reduce emissions by using hydrogen as an alternative fuel for a diesel engine integrated exhaust gas recirculation
  192. Technological Perspective for Reducing Emissions from Marine Engines
  193. Power generation characteristics of a thermoelectric modules-based power generator assisted by fishbone-shaped fins: Part I – effects of hot inlet gas parameters
  194. Power generation characteristics of a thermoelectric modules-based power generator assisted by fishbone-shaped fins: Part II – Effects of cooling water parameters
  195. A review of the effect of biodiesel on the corrosion behavior of metals/alloys in diesel engines
  196. A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel
  197. An experimental analysis on physical properties and spray characteristics of an ultrasound-assisted emulsion of ultra-low-sulphur diesel and Jatropha-based biodiesel
  198. Effect of Heat Treatment Process on The Microstructure and Mechanical Properties of The Spray Coating Ni-Cr on CT38 Steel
  199. Comparative analysis on performance and emission characteristics of an in-Vietnam popular 4-stroke motorcycle engine running on biogasoline and mineral gasoline
  200. Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel
  201. Trilateral correlation of spray characteristics, combustion parameters, and deposit formation in the injector hole of a diesel engine running on preheated Jatropha oil and fossil diesel fuel
  202. An investigation of deposit formation in the injector, spray characteristics, and performance of a diesel engine fueled with preheated vegetable oil and diesel fuel
  203. Experimental Analysis on the Ultrasound-based Mixing Technique Applied to Ultra-low Sulphur Diesel and Bio-oils
  204. Properties of DMF-fossil gasoline RON95 blends in the consideration as the alternative fuel
  205. Waste heat recovery from diesel engines based on Organic Rankine Cycle
  206. An investigation of remediation and recovery of oil spill and toxic heavy metal from maritime pollution by a new absorbent material
  207. A REVIEW ON FUELS USED FOR MARINE DIESEL ENGINES
  208. Measurement and Prediction of the Density and Viscosity of Biodiesel Blends
  209. Influences of heating temperatures on physical properties, spray characteristics of bio-oils and fuel supply system of a conventional diesel engine
  210. Prediction of the density and viscosity of biodiesel and the influence of biodiesel properties on a diesel engine fuel supply system
  211. MICROSTRUCTURES AND ELEMENTS DISTRIBUTION IN THE TRANSITION ZONE OF CARBON STEEL AND STAINLESS STEEL WELDS
  212. A study of emission characteristic, deposits, and lubrication oil degradation of a diesel engine running on preheated vegetable oil and diesel oil
  213. A review on deposit formation in the injector of diesel engines running on biodiesel
  214. EFFECT OF SN COMPONENT ON PROPERTIES AND MICROSTRUCTURE CU-NI-SN ALLOYS
  215. Impact of Jatropha Oil on Engine Performance, Emission Characteristics, Deposit Formation, and Lubricating Oil Degradation
  216. A novel investigation of oil and heavy metal adsorption capacity from as-fabricated adsorbent based on agricultural by-product and porous polymer
  217. Comparative Analysis on Performance and Emission Characteristic of Diesel Engine Fueled with Heated Coconut Oil and Diesel Fuel
  218. An absorption capacity investigation of new absorbent based on polyurethane foams and rice straw for oil spill cleanup
  219. A MINI REVIEW OF USING OLEOPHILIC SKIMMERS FOR OIL SPILL RECOVERY
  220. MICROSTRUCTURE CHANGE FOR MULTI-PASS WELDING BETWEEN AUSTENITIC STAINLESS STEEL AND CARBON STEEL
  221. The efficient lignocellulose-based sorbent for oil spill treatment from polyurethane and agricultural residue of Vietnam
  222. The Performance of Diesel Engine Fueled Diesel Oil in Comparison with Heated Pure Vegetable Oils Available in Vietnam
  223. The Performance of A Diesel Engine Fueled With Diesel Oil, Biodiesel and Preheated Coconut Oil