All Stories

  1. On the fatigue behavior of high-strength low-alloy steels after tempforming

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), August 2026, De Gruyter

    Dr Andrey Belyakov

  2. On the impact toughness of an ultrafine lamellar grained steel

    Article • Materials Letters, June 2026, Elsevier

    Dr Andrey Belyakov

  3. The key role of retained austenite stability in tempered martensite embrittlement of high-Si 0.33C steel

    Article • Materials Characterization, June 2026, Elsevier

    Dr Andrey Belyakov

  4. On the effect of different building planes on the corrosion behavior of additively manufactured 316L stainless steel in a simulated biological environment

    Article • Materials Chemistry and Physics, May 2026, Elsevier

    Dr Andrey Belyakov

  5. The Influence of the Structural-Phase State on Physical and Mechanical Characteristics of Fe-Mn Alloy

    Article • Physical Mesomechanics, April 2026, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  6. On the microstructure evolution under continuous dynamic recrystallization

    Article • Materials Letters, November 2025, Elsevier

    Dr Andrey Belyakov

  7. On stereological analysis of grain boundary character distribution in post-annealed LPBF 316L stainless steel

    Article • Materials Letters, September 2025, Elsevier

    Dr Andrey Belyakov

  8. On the low-cycle fatigue of a 316L-type steel produced by selective laser melting and annealing

    Article • Materials Letters, June 2025, Elsevier

    Dr Andrey Belyakov

  9. Morphological and crystallographic features of Laves phase in advanced 9 % Cr creep-resistant steel

    Article • Materials Characterization, May 2025, Elsevier

    Dr Andrey Belyakov

  10. Relationship Between Structure and Functional Properties of Ultrafine-Grained Fe-Mn-Si Alloys for Temporary Implants

    Article • Crystals, April 2025, MDPI AG

    Dr Andrey Belyakov

  11. On the low temperature deformation behavior of a warm rolled 304L-type stainless steel

    Article • Materialia, March 2025, Elsevier

    Dr Andrey Belyakov

  12. The Low-Cycle Fatigue Behavior of a High-Strength Low-Alloy Steel Subjected to Tempforming

    Article • Materials, February 2025, MDPI AG

    Dr Andrey Belyakov

  13. Functional and Mechanical Characteristics of Ultrafine-Grained Fe-Mn-Si Alloys for Biomedical Applications

    Article • Physical Mesomechanics, December 2024, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  14. On the texture and strength of a 316L steel processed by powder bed fusion

    Article • Materials Science and Engineering A, October 2024, Elsevier

    Dr Andrey Belyakov

  15. Making large-size fail-safe steel by deformation-assisted tempering process

    Article • Scientific Reports, September 2024, Springer Science + Business Media

    Dr Andrey Belyakov

  16. Eliminate the contradiction between temperature and toughness by grain-boundary delamination in heterogeneous ultrafine-grained lamellar steels

    Article • Materials Research Letters, September 2024, Taylor & Francis

    Dr Andrey Belyakov

  17. Impact Toughness of High-Strength Low-Alloy Steels Joined by Friction STIR Welding

    Article • Russian Physics Journal, September 2024, Springer Science + Business Media

    Dr Andrey Belyakov

  18. Structural and Physicomechanical Properties of Silicon Carbide-Based Reaction-Sintered Ceramics

    Article • Russian Metallurgy (Metally), July 2024, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  19. Austenite stabilization and precipitation of carbides during quenching and partitioning (Q&P) of low-alloyed Si–Mn steels with different carbon content

    Article • Materials Science and Engineering A, March 2024, Elsevier

    Dr Andrey Belyakov

  20. Friction Stir Welding‐Induced Microstructural Changes in Low‐Alloy Steel Post‐Tempforming

    Article • steel research international, January 2024, Wiley

    Dr Andrey Belyakov

  21. Effect of Friction Stir Welding and Tempering on the Microstructure and Strength of a Tempformed Low-Alloy Steel

    Article • Metals, January 2024, MDPI AG

    Dr Andrey Belyakov

  22. On the Texture and Strength of a 316l Steel Processed by Powder Bed Fusion

    Article • January 2024, Elsevier

    Dr Andrey Belyakov

  23. Microstructure and Strength of a Friction Stir Welded Low-Alloy Steel Processed by Tempforming

    Article • Russian Physics Journal, December 2023, Springer Science + Business Media

    Dr Andrey Belyakov

  24. Grain boundary assembly in a 316 L steel produced by selective laser melting and annealing

    Article • Materials Characterization, December 2023, Elsevier

    Dr Andrey Belyakov

  25. Advanced Martensitic Stainless Steels for Dental Instruments

    Article • Russian Physics Journal, November 2023, Springer Science + Business Media

    Dr Andrey Belyakov

  26. Features of the Recovery Process of Austenitic Stainless Steel Obtained by Selective Laser Melting

    Article • Russian Metallurgy (Metally), September 2023, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  27. The coarsening behavior of strengthening particles in an Al–Cu–Mg–Ag alloy during creep

    Article • Materials Science and Engineering A, September 2023, Elsevier

    Dr Andrey Belyakov

  28. Biocompatibility and Degradation of Fe-Mn-5Si Alloy after Equal-Channel Angular Pressing: In Vitro and In Vivo Study

    Article • Applied Sciences, August 2023, MDPI AG

    Dr Andrey Belyakov

  29. On the Strength of a 316L-Type Austenitic Stainless Steel Produced by Selective Laser Melting

    Article • Metals, August 2023, MDPI AG

    Dr Andrey Belyakov

  30. Microstructure and Mechanical Properties of Structural Steels and Alloys

    Article • Materials, July 2023, MDPI AG

    Dr Andrey Belyakov

  31. Effect of aging on secondary phases and properties of an S304H austenitic stainless steel

    Article • Materials Science and Engineering A, June 2023, Elsevier

    Dr Andrey Belyakov

  32. Effect of deformation methods on microstructure, texture, and properties of a Cu–Mg alloy

    Article • Materials Science and Engineering A, June 2023, Elsevier

    Dr Andrey Belyakov

  33. Ultrafine-Grained Stainless Steels after Severe Plastic Deformation

    Article • Metals, March 2023, MDPI AG

    Dr Andrey Belyakov

  34. Effect of Hot-Rolling on the Microstructure and Impact Toughness of an Advanced 9%Cr Steel

    Article • Crystals, March 2023, MDPI AG

    Dr Andrey Belyakov

  35. Effect of quenching and tempering on structure and mechanical properties of a low-alloy 0.25C steel

    Article • Materials Science and Engineering A, March 2023, Elsevier

    Evgeniy Tkachev, Dr Andrey Belyakov

  36. Effect of Tempforming Temperature on the Impact Toughness of an HSLA Steel

    Article • ISIJ International, February 2023, Iron and Steel Institute of Japan

    Dr Andrey Belyakov

  37. Long-Range Correlations in Severely Deformed Copper Alloys

    Article • January 2023, Elsevier

    Dr Andrey Belyakov

  38. Long-Range Crystallographic Orientation Correlations in Severely Deformed Copper Alloys

    Article • January 2023, Elsevier

    Dr Andrey Belyakov

  39. Mechanical properties and microstructure of a 9%Cr B-bearing martensitic steel after thermo-mechanical treatment

    Article • January 2023, American Institute of Physics

    Dr Andrey Belyakov

  40. Microstructural peculiarities in 316L-type steel subjected to primary recrystallization following small deformation

    Article • January 2023, American Institute of Physics

    Dr Andrey Belyakov

  41. On the strengthening mechanisms of high nitrogen austenitic stainless steels

    Article • Materials Letters, January 2023, Elsevier

    Dr Andrey Belyakov

  42. The deformation behavior of the {111}Al plates in an Al-Cu-Mg-Ag alloy

    Article • Acta Materialia, January 2023, Elsevier

    Dr Andrey Belyakov

  43. On Grain Boundary Engineering for a 316L Austenitic Stainless Steel

    Article • Metals, December 2022, MDPI AG

    Dr Andrey Belyakov

  44. Regularities of Microstructure Evolution in a Cu-Cr-Zr Alloy during Severe Plastic Deformation

    Article • Materials, August 2022, MDPI AG

    Dr Andrey Belyakov

  45. Tempforming Strengthening of a Low-Alloy Steel

    Article • Materials, July 2022, MDPI AG

    Dr Andrey Belyakov

  46. Effect of chromium content on precipitation in Cu–Cr–Zr alloys

    Article • Journal of Materials Science, July 2022, Springer Science + Business Media

    Dr Andrey Belyakov

  47. Cryogenic impact toughness of a work hardened austenitic stainless steel

    Article • Materialia, June 2022, Elsevier

    Dr Andrey Belyakov

  48. Microstructures and Mechanical Properties of Steels and Alloys Subjected to Large-Strain Cold-to-Warm Deformation

    Article • Metals, March 2022, MDPI AG

    Dr Andrey Belyakov

  49. On the yield stress anomaly in a B2-ordered refractory AlNbTiVZr0.25 high-entropy alloy

    Article • Materials Letters, March 2022, Elsevier

    Dr Andrey Belyakov

  50. Effect of rolling temperature and thickness reduction on the strength of a 316L steel

    Article • January 2022, American Institute of Physics

    Dr Andrey Belyakov

  51. Effect of advanced thermo-mechanical treatment on microstructure and properties of a low-alloyed copper alloy

    Article • January 2022, American Institute of Physics

    Arina Pilipenko, Dr Andrey Belyakov

  52. Mechanical properties of high-strength low-alloy steel after tempforming

    Article • January 2022, American Institute of Physics

    Dr Andrey Belyakov

  53. Microtexture evolutions in 304L and 316L stainless steels during rolling at 200°C and annealing

    Article • January 2022, American Institute of Physics

    Dr Andrey Belyakov

  54. Microstructure and Strengthening Mechanisms in an HSLA Steel Subjected to Tempforming

    Article • Metals, December 2021, MDPI AG

    Dr Andrey Belyakov

  55. On the transformation-induced plasticity of a medium-manganese steel

    Article • Materials Letters, December 2021, Elsevier

    Dr Andrey Belyakov

  56. Thermal stability of gradient microstructure in a low-alloyed Cu-Cr-Zr alloy

    Article • Materials Letters, December 2021, Elsevier

    Dr Andrey Belyakov

  57. Outstanding impact toughness of low-alloyed steel with fine lamellar microstructure

    Article • Materials Letters, November 2021, Elsevier

    Dr Andrey Belyakov

  58. Microstructure and Impact Toughness of High-Strength Low-Alloy Steel after Tempforming

    Article • The Physics of Metals and Metallography, October 2021, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  59. Stability of the Ultrafine-Grained Structure of Austenitic Corrosion-Resistant Steels during Annealing

    Article • The Physics of Metals and Metallography, August 2021, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  60. Peculiarities of DRX in a Highly-Alloyed Austenitic Stainless Steel

    Article • Materials, July 2021, MDPI AG

    Dr Andrey Belyakov

  61. Grain Orientation Spread in Dynamically Recrystallized Austenitic Steel

    Article • Materials Science Forum, January 2021, Trans Tech Publications

    Dr Andrey Belyakov

  62. Creep behavior and microstructure of a Ta-added 9%Cr steel with high B and low N contents

    Article • IOP Conference Series Materials Science and Engineering, January 2021, Institute of Physics Publishing

    Dr Andrey Belyakov

  63. Creep strength and microstructure of a modified P911-type steel weld joint

    Article • IOP Conference Series Materials Science and Engineering, January 2021, Institute of Physics Publishing

    Dr Andrey Belyakov

  64. Effect of Deformation Temperature on Formation of Ultrafine-Grained Structure in the Age-Hardenable Cu–Cr–Zr Alloy

    Article • The Physics of Metals and Metallography, January 2021, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  65. Effect of deformation techniques on the microstructure and mechanical properties of a copper alloy

    Article • IOP Conference Series Materials Science and Engineering, January 2021, Institute of Physics Publishing

    Dr Andrey Belyakov

  66. Effect of multiple forging and annealing on microstructure and mechanical properties of a high-manganese steel

    Article • IOP Conference Series Materials Science and Engineering, January 2021, Institute of Physics Publishing

    Dr Andrey Belyakov

  67. Effect of the deformation temperature on the deformation behavior of a Cu-Cr-Zr alloy

    Article • IOP Conference Series Materials Science and Engineering, January 2021, Institute of Physics Publishing

    Dr Andrey Belyakov

  68. Effect of thermomechanical treatment on the microstructure and mechanical properties of a low-carbon low-alloy steel

    Article • IOP Conference Series Materials Science and Engineering, January 2021, Institute of Physics Publishing

    Dr Andrey Belyakov

  69. Microstructure of a low alloyed Cu-Cr-Zr alloy after ECAP-Conform

    Article • IOP Conference Series Materials Science and Engineering, January 2021, Institute of Physics Publishing

    Dr Andrey Belyakov

  70. On friction stir welding of a medium manganese austenitic steel

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, December 2020, Taylor & Francis

    Dr Andrey Belyakov

  71. Microstructural Changes and Strengthening of Austenitic Stainless Steels during Rolling at 473 K

    Article • Metals, November 2020, MDPI AG

    Dr Andrey Belyakov

  72. Tempforming as an Advanced Processing Method for Carbon Steels

    Article • Metals, November 2020, MDPI AG

    Dr Andrey Belyakov

  73. Microstructure and Mechanical Properties of AISI 304L Austenitic Stainless Steel Processed by Various Schedules of Rolling

    Article • Journal of Physics Conference Series, November 2020, Institute of Physics Publishing

    Dr Andrey Belyakov

  74. Controlling microstructure and mechanical properties of additively manufactured high-strength steels by tailored solidification

    Article • Additive Manufacturing, October 2020, Elsevier

    Dr Andrey Belyakov

  75. Tailoring microstructure and texture of annealed Al-Mn alloy through the variation of homogenization and prior cold deformation strain

    Article • Materials Characterization, August 2020, Elsevier

    Dr Andrey Belyakov

  76. The Role of Deformation in Coarsening of M23C6 Carbide Particles in 9% Cr Steel

    Article • The Physics of Metals and Metallography, August 2020, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  77. Microstructure and Mechanical Properties of Medium Manganese Steel after Different Deformation and Thermal Treatments

    Article • Bulletin of the Russian Academy of Sciences Physics, July 2020, Allerton Press

    Dr Andrey Belyakov

  78. Structure and Texture Evolution of the Metastable Austenitic Steel during Cold Working

    Article • The Physics of Metals and Metallography, July 2020, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  79. Hot Deformation and Dynamic Recrystallization of 18%Mn Twinning‐Induced Plasticity Steels

    Article • Advanced Engineering Materials, May 2020, Wiley

    Dr Andrey Belyakov

  80. On the Strength of a 316L-Type Stainless Steel Subjected to Cold or Warm Rolling Followed by Annealing

    Article • Materials, May 2020, MDPI AG

    Dr Andrey Belyakov

  81. Creep strength breakdown and microstructure in a 9%Cr steel with high B and low N contents

    Article • Materials Science and Engineering A, January 2020, Elsevier

    Dr Andrey Belyakov

  82. On the Fracture Behavior of a Creep Resistant 10% Cr Steel with High Boron and Low Nitrogen Contents at Low Temperatures

    Article • Materials, December 2019, MDPI AG

    Dr Andrey Belyakov

  83. Microstructure and Crystallographic Texture of Silicon Iron Modified by Torsion Under Quasihydrostatic Pressure

    Article • Russian Physics Journal, December 2019, Springer Science + Business Media

    Dr Andrey Belyakov

  84. On strengthening of ultrafine grained austenitic steels subjected to large strain deformation

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Dr Andrey Belyakov

  85. Strengthening mechanisms of ultrafine grained copper alloys

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Dr Andrey Belyakov

  86. The influence of ultrafine‐grained structure on the mechanical properties and biocompatibility of austenitic stainless steels

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, October 2019, Wiley

    Dr Andrey Belyakov

  87. Experimental and numerical analyses of microstructure evolution of Cu-Cr-Zr alloys during severe plastic deformation

    Article • Materials Characterization, October 2019, Elsevier

    Dr. Elijah N Borodin, Dr Andrey Belyakov

  88. Grain sizes and dislocation densities in fcc-metallic materials processed by warm to hot working

    Article • Journal of Physics Conference Series, August 2019, Institute of Physics Publishing

    Dr Andrey Belyakov

  89. Improving Mechanical Properties of 18%Mn TWIP Steels by Cold Rolling and Annealing

    Article • Metals, July 2019, MDPI AG

    Dr Andrey Belyakov

  90. Effect of Warm to Hot Rolling on Microstructure, Texture and Mechanical Properties of an Advanced Medium-Mn Steel

    Article • Metallurgical and Materials Transactions A, July 2019, Springer Science + Business Media

    Dr Andrey Belyakov

  91. Effect of tempering on microstructure and mechanical properties of a Ta-added 9%Cr steel with high B and low N contents

    Article • IOP Conference Series Materials Science and Engineering, June 2019, Institute of Physics Publishing

    Dr Andrey Belyakov

  92. Dynamic Recrystallization in Austenitic Stainless Steel during Hot Working with Decreasing Deformation Temperature

    Article • Materials Performance and Characterization, May 2019, ASTM International

    Dr Andrey Belyakov

  93. Effect of Cold Rolling and Subsequent Annealing on the Microstructure and the Microtexture of Austenitic Corrosion-Resistant Steels

    Article • Russian Metallurgy (Metally), April 2019, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  94. Dynamically Recrystallized Microstructures, Textures, and Tensile Properties of a Hot Worked High-Mn Steel

    Article • Metals, January 2019, MDPI AG

    Dr Andrey Belyakov

  95. Recrystallized microstructures and mechanical properties of a C-containing CoCrFeNiMn-type high-entropy alloy

    Article • Materials Science and Engineering A, January 2019, Elsevier

    Dr Andrey Belyakov

  96. Effect of Deformation Temperature on Microstructure and Mechanical Properties of Low-Alloyed Copper Alloy

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Dr Andrey Belyakov, Evgeniy Tkachev

  97. Mechanical Behavior of High-Mn Steels Processed by Hot Rolling

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Dr Andrey Belyakov

  98. Grain refinement and strengthening of austenitic stainless steels during large strain cold rolling

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, November 2018, Taylor & Francis

    Dr Andrey Belyakov

  99. Deformation Mechanisms Operating in TWIP/TRIP Steels Processed by Warm to Hot Working

    Article • Acta Physica Polonica A, September 2018, Institute of Physics, Polish Academy of Sciences

    Dr Andrey Belyakov

  100. Microstructure and Mechanical Properties of Structural Metals and Alloys

    Article • Metals, August 2018, MDPI AG

    Dr Andrey Belyakov

  101. Annealing Behavior and Kinetics of Primary Recrystallization of Copper

    Article • Defect and Diffusion Forum, July 2018, Trans Tech Publications

    Dr Andrey Belyakov

  102. Microstructure and Mechanical Properties of an Ultrafine Grained Medium-Mn Steel

    Article • Defect and Diffusion Forum, July 2018, Trans Tech Publications

    Dr Andrey Belyakov

  103. On Primary Recrystallization of High-Mn Austenitic Steels

    Article • Defect and Diffusion Forum, July 2018, Trans Tech Publications

    Dr Andrey Belyakov

  104. Deformation Behavior of High-Mn TWIP Steels Processed by Warm-to-Hot Working

    Article • Metals, June 2018, MDPI AG

    Dr Andrey Belyakov

  105. On Kinetics of Grain Refinement and Strengthening by Dynamic Recrystallization

    Article • Advanced Engineering Materials, May 2018, Wiley

    Dr Andrey Belyakov

  106. Creep behavior and microstructural evolution of a 9%Cr steel with high B and low N contents

    Article • Materials Science and Engineering A, May 2018, Elsevier

    Evgeniy Tkachev, Dr Andrey Belyakov

  107. Impact toughness of an S700MC-type steel: Tempforming vs ausforming

    Article • Materials Science and Engineering A, April 2018, Elsevier

    Dr Andrey Belyakov

  108. Structural changes in metastable austenitic steel during equal channel angular pressing and subsequent cyclic deformation

    Article • Materials Science and Engineering A, April 2018, Elsevier

    Dr Andrey Belyakov

  109. Microstructure and Properties of Fine Grained Cu-Cr-Zr Alloys after Termo-Mechanical Treatments

    Article • REVIEWS ON ADVANCED MATERIALS SCIENCE, March 2018, De Gruyter

    Dr Andrey Belyakov

  110. Microstructure and Mechanical Properties of Austenitic Stainless Steels after Dynamic and Post‐Dynamic Recrystallization Treatment

    Article • Advanced Engineering Materials, February 2018, Wiley

    Dr Andrey Belyakov

  111. Dynamic recrystallization of a high-Mn TWIP steel during multiple forging at 800°C

    Article • January 2018, American Institute of Physics

    Dr Andrey Belyakov

  112. Effect of hot working conditions on microstructure and mechanical properties of a high-Mn TWIP steel

    Article • January 2018, American Institute of Physics

    Dr Andrey Belyakov

  113. Microstructure and mechanical properties of a modified P911-type steel weld joint

    Article • January 2018, American Institute of Physics

    Dr Andrey Belyakov

  114. Thermal stability of recycled copper

    Article • January 2018, American Institute of Physics

    Dr Andrey Belyakov

  115. Effect of Tungsten on Creep Behavior of 9%Cr–3%Co Martensitic Steels

    Article • Metals, December 2017, MDPI AG

    Dr Andrey Belyakov

  116. Microstructure and Mechanical Properties of a High-Mn TWIP Steel Subjected to Cold Rolling and Annealing

    Article • Metals, December 2017, MDPI AG

    Dr Andrey Belyakov

  117. Grain Refinement Kinetics in a Low Alloyed Cu–Cr–Zr Alloy Subjected to Large Strain Deformation

    Article • Materials, December 2017, MDPI AG

    Dr. Elijah N Borodin, Dr Andrey Belyakov

  118. Effect of rolling temperature on microstructure and mechanical properties of 18%Mn TWIP/TRIP steels

    Article • Materials Science and Engineering A, December 2017, Elsevier

    Dr Andrey Belyakov

  119. Structure and Mechanical and Corrosion Properties of a Magnesium Mg–Y–Nd–Zr Alloy after High Pressure Torsion

    Article • Russian Metallurgy (Metally), November 2017, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  120. Hall-Petch relationship for austenitic stainless steels processed by large strain warm rolling

    Article • Acta Materialia, September 2017, Elsevier

    Dr Andrey Belyakov

  121. Effect of chromium and zirconium content on structure, strength and electrical conductivity of Cu-Cr-Zr alloys after high pressure torsion

    Article • Materials Letters, July 2017, Elsevier

    Dr Andrey Belyakov

  122. Annealing behavior of a 304L stainless steel processed by large strain cold and warm rolling

    Article • Materials Science and Engineering A, March 2017, Elsevier

    Dr Andrey Belyakov

  123. On the effect of chemical composition on yield strength of TWIP steels

    Article • Materials Science and Engineering A, February 2017, Elsevier

    Dr Andrey Belyakov

  124. Evolution of Lath Substructure and Internal Stresses in a 9% Cr Steel during Creep

    Article • ISIJ International, January 2017, Iron and Steel Institute of Japan

    Dr Andrey Belyakov

  125. Advanced automobile steels subjected to plate rolling at 773 K or 1373 K

    Article • January 2017, American Institute of Physics

    Dr Andrey Belyakov

  126. Effect of annealing treatment on ECAP structure in Cu-Cr-Zr bronze

    Article • January 2017, American Institute of Physics

    Dr Andrey Belyakov

  127. Effect of large strain warm rolling and subsequent annealing on the microstructure and mechanical properties of austenitic stainless steels

    Article • January 2017, American Institute of Physics

    Dr Andrey Belyakov

  128. Effect of thermomechanical treatment on microstructure and mechanical properties of high-strength low-alloy steel

    Article • January 2017, American Institute of Physics

    Dr Andrey Belyakov

  129. Influence of cold forging and annealing on microstructure and mechanical properties of a high-Mn TWIP steel

    Article • Kovove Materialy-Metallic Materials, January 2017, Central Library of the Slovak Academy of Sciences

    Dr Andrey Belyakov

  130. Recrystallization kinetics and texture evolution during annealing of cold-rolled high-Mn steel

    Article • January 2017, American Institute of Physics

    Dr Andrey Belyakov

  131. Development of Σ3 n CSL boundaries in austenitic stainless steels subjected to large strain deformation and annealing

    Article • Journal of Materials Science, December 2016, Springer Science + Business Media

    Dr Andrey Belyakov

  132. Grain Boundary Assemblies in Dynamically-Recrystallized Austenitic Stainless Steel

    Article • Metals, November 2016, MDPI AG

    Dr Andrey Belyakov

  133. Regularities of Microstructure Evolution and Strengthening Mechanisms of Austenitic Stainless Steels Subjected to Large Strain Cold Working

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Andrey Belyakov

  134. Effect of Deformation Structure on Strength of a Low Alloyed Cu-Cr-Zr Alloy

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Andrey Belyakov

  135. Deformation Microstructures and Mechanical Properties of an Austenitic Stainless Steel Subjected to Warm Rolling

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Andrey Belyakov

  136. Kinetics of Submicrocrystalline Structure Formation in a Cu-Cr-Zr Alloy during Large Plastic Deformation

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Andrey Belyakov

  137. Effect of SPD Processing Technique on Grain Refinement and Properties of an Austenitic Stainless Steel

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Andrey Belyakov

  138. Effect of Tempering on Microstructure and Creep Properties of P911 Steel

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Andrey Belyakov, Evgeniy Tkachev

  139. Advanced Thermomechanical Processing for a High-Mn Austenitic Steel

    Article • Metallurgical and Materials Transactions A, October 2016, Springer Science + Business Media

    Dr Andrey Belyakov

  140. Recrystallization kinetics of an austenitic high-manganese steel subjected to severe plastic deformation

    Article • Russian Metallurgy (Metally), September 2016, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  141. Deformation and Recrystallization Textures in A High-Mn Steel Subjected to Large Strain Cold Rolling

    Article • August 2016, Wiley

    Dr Andrey Belyakov

  142. Microstructure and Mechanical Properties of 18%Mn TWIP/TRIP Steels Processed by Warm or Hot Rolling

    Article • steel research international, June 2016, Wiley

    Dr Andrey Belyakov

  143. Deformation microstructures and tensile properties of an austenitic stainless steel subjected to multiple warm rolling

    Article • Materials Science and Engineering A, June 2016, Elsevier

    Dr Andrey Belyakov

  144. Strengthening of age-hardenable WE43 magnesium alloy processed by high pressure torsion

    Article • Materials Letters, May 2016, Elsevier

    Dr Andrey Belyakov

  145. Tempering behavior of a low nitrogen boron-added 9%Cr steel

    Article • Materials Science and Engineering A, April 2016, Elsevier

    Evgeniy Tkachev, Dr Andrey Belyakov

  146. Mechanical behavior and brittle–ductile transition of high-chromium martensitic steel

    Article • The Physics of Metals and Metallography, April 2016, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  147. Mechanical characteristics and microstructure of weld joint of high-temperature martensitic steel containing 9% Cr

    Article • The Physics of Metals and Metallography, April 2016, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  148. Effect of cold rolling on recrystallization and tensile behavior of a high-Mn steel

    Article • Materials Characterization, February 2016, Elsevier

    Dr Andrey Belyakov

  149. Austenitic Stainless Steel: Microstructural Evolution

    Article • January 2016, Taylor & Francis

    Dr Andrey Belyakov

  150. Effects of Initial Microstructure and Deformation Method on Grain Refinement in a Cu-Cr-Zr Alloy

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Dr Andrey Belyakov

  151. Formation of Ultrafine-Grained Structures in 304L and 316L Stainless Steels by Recrystallization and Reverse Phase Transformation

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Dr Andrey Belyakov

  152. Superplastic Behavior of a Cu-Cr-Zr Alloy Subjected to ECAP

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Dr Andrey Belyakov

  153. Ultrafine-Grained Structure and Mechanical Properties of a High-Mn Twinning Induced Plasticity Steel

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Mr Pavel Kusakin, Dr Andrey Belyakov

  154. Submicrocrystalline Austenitic Stainless Steel Processed by Cold or Warm High Pressure Torsion

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Dr Andrey Belyakov

  155. On Regularities of Grain Refinement through Large Strain Deformation

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Dr Andrey Belyakov

  156. Fine-Grained High-Mn Steel

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Dr Andrey Belyakov

  157. On Strengthening of Austenitic Stainless Steel by Large Strain Cold Working

    Article • ISIJ International, January 2016, Iron and Steel Institute of Japan

    Dr Andrey Belyakov

  158. Analysis of the tensile behavior of high-Mn TWIP steel based on the microstructural evolution

    Article • January 2016, American Institute of Physics

    Dr Andrey Belyakov

  159. Deformation and Recrystallization Textures in a High-Mn Steel Subjected to Large Strain Cold Rolling

    Article • January 2016, Springer Science + Business Media

    Dr Andrey Belyakov

  160. Analysis of the deformation behavior of low Cu-Cr-Zr alloy

    Article • January 2016, American Institute of Physics

    Dr Andrey Belyakov

  161. Grain refinement kinetics and strengthening mechanisms in Cu–0.3Cr–0.5Zr alloy subjected to intense plastic deformation

    Article • Materials Science and Engineering A, January 2016, Elsevier

    Dr Andrey Belyakov

  162. Microstructure and mechanical properties of advanced austenitic steel

    Article • January 2016, American Institute of Physics

    Dr Andrey Belyakov

  163. Structural/textural changes and strengthening of an advanced high-Mn steel subjected to cold rolling

    Article • Materials Science and Engineering A, January 2016, Elsevier

    Dr Andrey Belyakov

  164. Origin of Threshold Stresses in a P92-type Steel

    Article • Transactions of the Indian Institute of Metals, December 2015, Springer Science + Business Media

    Dr Andrey Belyakov

  165. Influence of the carbon content on the phase composition and mechanical properties of P92-type steel

    Article • The Physics of Metals and Metallography, November 2015, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  166. Sources of high creep resistance of modern high-chromium martensitic steels

    Article • Doklady Physical Chemistry, September 2015, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  167. Effect of Severe Cold or Warm Deformation on Microstructure Evolution and Tensile Behavior of a 316L Stainless Steel

    Article • Advanced Engineering Materials, April 2015, Wiley

    Dr Andrey Belyakov

  168. Development of Nanocrystalline 304L Stainless Steel by Large Strain Cold Working

    Article • Metals, April 2015, MDPI AG

    Dr Andrey Belyakov

  169. Deformation microstructures, strengthening mechanisms, and electrical conductivity in a Cu–Cr–Zr alloy

    Article • Materials Science and Engineering A, April 2015, Elsevier

    Dr Andrey Belyakov

  170. Three-stage relationship between flow stress and dynamic grain size in titanium in a wide temperature interval

    Article • Materials Science and Engineering A, March 2015, Elsevier

    Dr Andrey Belyakov

  171. Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273K

    Article • Acta Materialia, January 2015, Elsevier

    Dr Andrey Belyakov

  172. Σ3 CSL boundary distributions in an austenitic stainless steel subjected to multidirectional forging followed by annealing

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, November 2014, Taylor & Francis

    Dr Andrey Belyakov

  173. Microstructure evolution and strengthening mechanisms of Fe–23Mn–0.3C–1.5Al TWIP steel during cold rolling

    Article • Materials Science and Engineering A, November 2014, Elsevier

    Dr Andrey Belyakov

  174. Laves-phase precipitates in a low-carbon 9% Cr martensitic steel during aging and creep at 923 K

    Article • Materials Science and Engineering A, October 2014, Elsevier

    Dr Andrey Belyakov

  175. Effect of large plastic deformation on microstructure and mechanical properties of a TWIP steel

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Andrey Belyakov

  176. Effect of multidirectional forging and equal channel angular pressing on ultrafine grain formation in a Cu- Cr-Zr alloy

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Andrey Belyakov

  177. Microstructure evolution in a 316L stainless steel subjected to multidirectional forging and unidirectional bar rolling

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Andrey Belyakov

  178. Microstructure evolution in a Cu-Cr-Zr alloy during warm intense plastic straining

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Andrey Belyakov

  179. Modeling the effect of deformation on strength of a Fe-23Mn-0.3C-1.5Al TWIP steel

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Andrey Belyakov

  180. Nanocrystalline structures and tensile properties of stainless steels processed by severe plastic deformation

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Andrey Belyakov

  181. Tensile behavior of an austenitic stainless steel subjected to multidirectional forging

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Andrey Belyakov

  182. Grain refinement in a Cu–Cr–Zr alloy during multidirectional forging

    Article • Materials Science and Engineering A, June 2014, Elsevier

    Dr Andrey Belyakov

  183. Static Grain Growth in an Austenitic Stainless Steel Subjected to Intense Plastic Straining

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Dr Andrey Belyakov

  184. Structure and Fatigue Properties of Cr-Ni-Ti Austenitic Steel after Equal Channel Angular Pressing

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Dr Andrey Belyakov

  185. Ultrafine Grain Evolution in a Cu-Cr-Zr Alloy during Warm Multidirectional Forging

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Dr Andrey Belyakov

  186. Development of Ultrafine Grained Austenitic Stainless Steels by Large Strain Deformation and Annealing

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Dr Andrey Belyakov

  187. Microstructure Evolution in a 304-Type Austenitic Stainless Steel during Multidirectional Forging at Ambient Temperature

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Dr Andrey Belyakov

  188. Evolution of Laves-Phase Particles in a Low Carbon 9%Cr Martensitic Steel during Creep at 650°C

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Dr Andrey Belyakov

  189. Effect of Cold Rolling on Microstructure and Mechanical Properties of a Fe-23Mn-0.3C-1.5Al TWIP Steel

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Dr Andrey Belyakov

  190. Mechanical Properties at Elevated Temperatures of an S304H-Type Austenitic Stainless Steel Processed by Warm Rolling

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Dr Andrey Belyakov

  191. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

    Article • Progress in Materials Science, March 2014, Elsevier

    Dr Andrey Belyakov

  192. Effect of annealing on wear resistance and electroconductivity of copper processed by high-pressure torsion

    Article • Journal of Materials Science, December 2013, Springer Science + Business Media

    Dr Andrey Belyakov

  193. Wear resistance and electroconductivity in copper processed by severe plastic deformation

    Article • Wear, July 2013, Elsevier

    Dr Andrey Belyakov

  194. The crystallography of M23C6carbides in a martensitic 9% Cr steel after tempering, aging and creep

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, June 2013, Taylor & Francis

    Dr Andrey Belyakov

  195. Regularities of Grain Refinement in an Austenitic Stainless Steel during Multiple Warm Working

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Dr Andrey Belyakov

  196. Strain-induced grain evolution in an austenitic stainless steel under warm multiple forging

    Article • Materials Science and Engineering A, March 2013, Elsevier

    Dr Andrey Belyakov

  197. Evolution of texture and development of ∑3 n grain clusters in 316 austenitic stainless steel during thermal mechanical processing

    Article • Journal of Materials Science, September 2012, Springer Science + Business Media

    Dr Andrey Belyakov

  198. Effect of cold rolling on the structure and mechanical properties of austenitic corrosion-resistant 10Kh18N8D3BR steel

    Article • Russian Metallurgy (Metally), September 2012, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  199. Effect of Co on Creep Behavior of a P911 Steel

    Article • Metallurgical and Materials Transactions A, August 2012, Springer Science + Business Media

    Dr Andrey Belyakov

  200. Grain boundary assembles developed in an austenitic stainless steel during large strain warm working

    Article • Materials Characterization, August 2012, Elsevier

    Dr Andrey Belyakov

  201. Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steel

    Article • Materials Science and Engineering A, May 2012, Elsevier

    Dr Andrey Belyakov

  202. Recrystallization behavior of a Ni–20%Cr alloy subjected to severe plastic deformation

    Article • Materials Science and Engineering A, May 2012, Elsevier

    Dr Andrey Belyakov

  203. Microstructure Evolution in an Advanced 9 pct Cr Martensitic Steel during Creep at 923 K (650 °C)

    Article • Metallurgical and Materials Transactions A, April 2012, Springer Science + Business Media

    Dr Andrey Belyakov

  204. Recrystallization Processes in a Ni-20%Cr Alloy Subjected to High-Pressure Torsion

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr Andrey Belyakov

  205. Grain Refinement in Austenitic Stainless Steel during Warm Screw Rolling

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr Andrey Belyakov

  206. Ultrafine Grain Evolution in Austenitic Stainless Steel during Large Strain Deformation and Subsequent Annealing

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr Andrey Belyakov

  207. The Formation of Fine-Grained Structure in S304H-Type Austenitic Stainless Steel during Hot-To-Warm Working

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr Andrey Belyakov

  208. Zener Pinning Pressure in Tempered Martensite Lath Structure

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr Andrey Belyakov

  209. Structural Changes in a 9%Cr Creep Resistant Steel during Creep Test

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr Andrey Belyakov

  210. Migration of Dislocation Boundaries in a Modified P911 3%Co Heat Resistant Steel during Tempering, Ageing and Creep

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr Andrey Belyakov

  211. Structural changes of tempered martensitic 9%Cr–2%W–3%Co steel during creep at 650°C

    Article • Materials Science and Engineering A, February 2012, Elsevier

    Dr Andrey Belyakov

  212. Kinetics of Grain Refinement by Warm Deformation of 304-Type Stainless Steel

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Andrey Belyakov

  213. Effect of Tempering on Mechanical Properties and Microstructure of a 9% Cr Heat Resistant Steel

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Andrey Belyakov

  214. Dynamic Recrystallization Mechanisms Operating under Different Processing Conditions

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Andrey Belyakov

  215. GRAIN BOUNDARY PLANE DISTRIBUTIONS IN 304 STEEL ANNEALED AT HIGH TEMPERATURE AFTER A PARALLEL PROCESSING OF MULTIPLE FORGING AND DIRECT ROLLING

    Article • ACTA METALLURGICA SINICA, January 2012, China Science Publishing & Media Ltd.

    Dr Andrey Belyakov

  216. Laves phase evolution in a modified P911 heat resistant steel during creep at 923K

    Article • Materials Science and Engineering A, January 2012, Elsevier

    Dr Andrey Belyakov

  217. Microstructure Evolution in a P911 Steel under Creep Conditions

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Dr Andrey Belyakov

  218. Structural Changes in a 304-Type Austenitic Stainless Steel Processed by Multiple Hot Rolling

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Dr Andrey Belyakov

  219. Submicrocrystalline Structures and Tensile Behaviour of Stainless Steels Subjected to Large Strain Deformation and Subsequent Annealing

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Dr Andrey Belyakov

  220. Microstructure and Deformation Behavior of a Hot Forged 9%Cr Creep Resistant Steel

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Dr Andrey Belyakov

  221. Microstructure Evolution and Pinning of Boundaries by Precipitates in a 9 pct Cr Heat Resistant Steel During Creep

    Article • Metallurgical and Materials Transactions A, September 2011, Springer Science + Business Media

    Dr Andrey Belyakov

  222. Structural strengthening of an austenitic stainless steel subjected to warm-to-hot working

    Article • Materials Characterization, April 2011, Elsevier

    Dr Andrey Belyakov

  223. Microstructure evolution in a 3%Co modified P911 heat resistant steel under tempering and creep conditions

    Article • Materials Science and Engineering A, January 2011, Elsevier

    Dr Andrey Belyakov

  224. Recrystallization Mechanisms Leading to the Formation of Nanoscale Grains in a Ni-20%Cr Alloy Subjected to Intense Plastic Deformation

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Dr Andrey Belyakov

  225. Microstructure Evolution in a Cu-Ag Alloy during Large Strain Deformation and Annealing

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Dr Andrey Belyakov

  226. Nanostructure Evolution in an Austenitic Stainless Steel Subjected to Multiple Forging at Ambient Temperature

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Dr Andrey Belyakov

  227. The Formation of Submicrometer Scale Grains in a Super304H Steel during Multiple Compressions at 700°C

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Dr Andrey Belyakov

  228. Effect of austenization temperature on creep resistance of steel 10Kh9V2MFBR

    Article • Metal Science and Heat Treatment, September 2010, Springer Science + Business Media

    Dr Andrey Belyakov

  229. Structural changes in refractory steel 10Kh9V2MFBR due to creep at 650°C

    Article • Metal Science and Heat Treatment, September 2010, Springer Science + Business Media

    Dr Andrey Belyakov

  230. Structural changes in steel 10Kh9K3V1M1FBR due to creep

    Article • Metal Science and Heat Treatment, September 2010, Springer Science + Business Media

    Dr Andrey Belyakov

  231. Tempering-induced structural changes in steel 10Kh9K3V1M1FBR and their effect on the mechanical properties

    Article • Metal Science and Heat Treatment, September 2010, Springer Science + Business Media

    Dr Andrey Belyakov

  232. Changes in misorientations of grain boundaries in titanium during deformation

    Article • Materials Characterization, July 2010, Elsevier

    Dr Sergey Mironov, Dr Andrey Belyakov

  233. Dynamic polygonization in 9%Cr heat resistant steel

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Dr Andrey Belyakov

  234. Internal stresses in a 15%Cr ferritic stainless steel after large strain unidirectional processing

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Dr Andrey Belyakov

  235. Dynamic recrystallization mechanisms operating in a Ni–20%Cr alloy under hot-to-warm working

    Article • Acta Materialia, June 2010, Elsevier

    Dr Andrey Belyakov

  236. Recrystallization Mechanisms in Severely Deformed Dual-Phase Stainless Steel

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr Andrey Belyakov

  237. Mechanisms of New Grain Formation in a Ni-20%Cr Alloy during Warm to Hot Working

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr Andrey Belyakov

  238. Microstructure Evolution in a 9%Cr Heat Resistant Steel during Creep Tests

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr Andrey Belyakov

  239. Creep Behavior of an Oxide Dispersion Strengthened Iron with Ultrafine Grain Structure

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr Andrey Belyakov

  240. Microstructure Evolution in a 3%Co Modified P911 Heat Resistant Steel under Creep Conditions

    Article • Advanced Materials Research, January 2010, Trans Tech Publications

    Dr Andrey Belyakov

  241. Changes in the grain structure of metallic materials upon plastic treatment

    Article • The Physics of Metals and Metallography, October 2009, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  242. Plastic flow of the mechanically alloyed Fe-0.6%O at temperatures of 550–700°C

    Article • The Physics of Metals and Metallography, May 2009, Pleiades Publishing Ltd

    Dr Andrey Belyakov

  243. Tensile behaviour of submicrocrystalline ferritic steel processed by large-strain deformation

    Article • Philosophical Magazine Letters, March 2009, Taylor & Francis

    Dr Andrey Belyakov

  244. Ultrafine Grain Formation in Ferritic Stainless Steel during Severe Plastic Deformation

    Article • Metallurgical and Materials Transactions A, May 2008, Springer Science + Business Media

    Dr Andrey Belyakov

  245. Regularities of Deformation Microstructures in Ferritic Stainless Steels during Large Strain Cold Working

    Article • ISIJ International, January 2008, Iron and Steel Institute of Japan

    Dr Andrey Belyakov

  246. Incomplete recrystallization in cold worked steel containing TiC

    Article • Materials Science and Engineering A, December 2007, Elsevier

    Dr Andrey Belyakov

  247. Annealing behavior of a ferritic stainless steel subjected to large-strain cold working

    Article • Journal of Materials Research, November 2007, Cambridge University Press

    Dr Andrey Belyakov

  248. Texture Invariant Annealing in Severely Deformed Steel

    Article • October 2007, CrossRef Test Account

    Dr Andrey Belyakov

  249. Recovery in 15%Cr Ferritic Stainless Steel after Large Strain Deformation

    Article • October 2007, CrossRef Test Account

    Dr Andrey Belyakov

  250. Ultrafine grain development in copper during multidirectional forging at 195 K

    Article • Philosophical Magazine Letters, September 2007, Taylor & Francis

    Dr Andrey Belyakov

  251. Comparative study on microstructure evolution upon unidirectional and multidirectional cold working in an Fe–15%Cr ferritic alloy

    Article • Materials Science and Engineering A, May 2007, Elsevier

    Dr Andrey Belyakov

  252. Texture Invariant Annealing in Severely Deformed Steel

    Article • Materials Science Forum, January 2007, Trans Tech Publications

    Dr Andrey Belyakov

  253. Recovery in 15%Cr Ferritic Stainless Steel after Large Strain Deformation

    Article • Materials Science Forum, January 2007, Trans Tech Publications

    Dr Andrey Belyakov

  254. Development of a high-strength high-conductivity Cu−Ni−P alloy. Part II: Processing by severe deformation

    Article • Journal of Electronic Materials, November 2006, Springer Science + Business Media

    Dr Andrey Belyakov

  255. Microstructure evolution in dual-phase stainless steel during severe deformation

    Article • Acta Materialia, May 2006, Elsevier

    Dr Andrey Belyakov

  256. Deformation Microstructures in a Two-Phase Stainless Steel during Large Strain Deformation

    Article • January 2006, CrossRef Test Account

    Dr Andrey Belyakov

  257. On Structural Mechanism of Continuous Recrystallization in Ferritic Stainless Steel after Large Strain Processing

    Article • January 2006, CrossRef Test Account

    Dr Andrey Belyakov

  258. Deformation Microstructures in a Two-Phase Stainless Steel during Large Strain Deformation

    Article • Materials Science Forum, January 2006, Trans Tech Publications

    Dr Andrey Belyakov

  259. On Structural Mechanism of Continuous Recrystallization in Ferritic Stainless Steel after Large Strain Processing

    Article • Materials Science Forum, January 2006, Trans Tech Publications

    Dr Andrey Belyakov

  260. Recovery and recrystallization in ferritic stainless steel after large strain deformation

    Article • Materials Science and Engineering A, August 2005, Elsevier

    Dr Andrey Belyakov

  261. Recovery and Recrystallization in Cold Worked Fe – O Steels

    Article • Materials Science Forum, January 2004, Trans Tech Publications

    Dr Andrey Belyakov

  262. Microstructure Evolution in Ferritic Stainless Steels during Large Strain Deformation

    Article • MATERIALS TRANSACTIONS, January 2004, Japan Institute of Metals

    Dr Andrey Belyakov

  263. Effect of Nano-Sized Oxides on Annealing Behaviour of Ultrafine Grained Steels

    Article • MATERIALS TRANSACTIONS, January 2004, Japan Institute of Metals

    Dr Andrey Belyakov

  264. Hydrogen induced delayed fracture of ultrafine grained 0.6% O steel with dispersed oxide particles

    Article • Scripta Materialia, December 2003, Elsevier

    Dr Andrey Belyakov

  265. Annealing softening mechanisms operating in cold worked oxide-bearing steels

    Article • Scripta Materialia, May 2003, Elsevier

    Dr Andrey Belyakov

  266. Evolution of grain boundary assemblies in Fe–0.6%O under mechanical milling followed by consolidating rolling

    Article • Scripta Materialia, April 2003, Elsevier

    Dr Andrey Belyakov

  267. Static recrystallization of SiO2-particle containing {011}<100> copper single crystals

    Article • Acta Materialia, April 2003, Elsevier

    Dr Andrey Belyakov

  268. Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation

    Article • Acta Materialia, February 2003, Elsevier

    Dr Andrey Belyakov

  269. Evolution of Grain Boundaries and Subboundaries in Stainless Steel during Dynamic Recrystallization

    Article • Materials Science Forum, January 2003, Trans Tech Publications

    Dr Andrey Belyakov

  270. Continuous recrystallization in austenitic stainless steel after large strain deformation

    Article • Acta Materialia, April 2002, Elsevier

    Dr Andrey Belyakov

  271. Microstructure and deformation behaviour of submicrocrystalline 304 stainless steel produced by severe plastic deformation

    Article • Materials Science and Engineering A, December 2001, Elsevier

    Dr Andrey Belyakov

  272. Grain refinement in copper under large strain deformation

    Article • Philosophical Magazine A, November 2001, Taylor & Francis

    Dr Andrey Belyakov

  273. Thermal stability of ultra fine-grained steel containing dispersed oxides

    Article • Scripta Materialia, November 2001, Elsevier

    Dr Andrey Belyakov

  274. Strain-induced submicrocrystalline grains developed in austenitic stainless steel under severe warm deformation

    Article • Philosophical Magazine Letters, November 2000, Taylor & Francis

    Dr Andrey Belyakov

  275. Dynamic recrystallization in ultra fine-grained 304 stainless steel

    Article • Scripta Materialia, June 2000, Elsevier

    Dr Andrey Belyakov

  276. Fine-Grained Structure Formation in Austenitic Stainless Steel under Multiple Deformation at 0.5Tm

    Article • Materials Transactions JIM, January 2000, Japan Institute of Metals

    Dr Andrey Belyakov

  277. Grain Refinement in a 304 Type Stainless Steel Caused by Multiple Deformation at 0.5 Tm

    Article • ISIJ International, January 2000, Iron and Steel Institute of Japan

    Dr Andrey Belyakov

  278. Substructures and internal stresses developed under warm severe deformation of austenitic stainless steel

    Article • Scripta Materialia, January 2000, Elsevier

    Dr Andrey Belyakov

  279. Recrystallization and Related Phenomena. Dynamic Recrystallization under Warm Deformation of Polycrystalline Copper.

    Article • ISIJ International, January 1998, Iron and Steel Institute of Japan

    Dr Andrey Belyakov

  280. New grain formation during warm deformation of ferritic stainless steel

    Article • Metallurgical and Materials Transactions A, January 1998, Springer Science + Business Media

    Dr Andrey Belyakov

  281. Two Types of Grain Boundaries in Deformed Materials

    Article • Materials Science Forum, January 1996, Trans Tech Publications

    Dr Andrey Belyakov

  282. Effect of Deformation Mechanisms on Dynamic Recrystallization of Ferrite Stainless Steel

    Article • Key Engineering Materials, January 1994, Trans Tech Publications

    Dr Andrey Belyakov

  283. High-Temperature Mechanism of Dynamic Recrystallization of Ferritic Steel

    Article • Materials Science Forum, January 1993, Trans Tech Publications

    Dr Andrey Belyakov

  284. Structural changes in corrosion-resistant steels during hot deformation

    Article • Metal Science and Heat Treatment, May 1992, Springer Science + Business Media

    Dr Andrey Belyakov