All Stories

  1. Testing the accuracy of in-process springback measurements in tube draw bending

    Article • January 2019, American Institute of Physics

    Dr Andrea Ghiotti

  2. Anisotropy influence on the mechanical and microstructural characteristics of AZ31B sheets deformed at room and elevated temperature

    Article • January 2019, American Institute of Physics

    Dr Andrea Ghiotti

  3. Influence of the machining parameters and cooling strategies on the wear behavior of wrought and additive manufactured Ti6Al4V for biomedical applications

    Article • Tribology International, October 2016, Elsevier

    Dr Andrea Ghiotti

  4. A hybrid mixed double-sided incremental forming method for forming Ti6Al4V alloy

    Article • CIRP Annals, May 2016, Elsevier

    Dr Andrea Ghiotti

  5. Tribological behavior of high thermal conductivity steels for hot stamping tools

    Article • Tribology International, May 2016, Elsevier

    Dr Andrea Ghiotti

  6. Tribology in Hot Stamping of Boron Steel Sheets

    Article • March 2016, World Scientific Pub Co Pte Lt

    Dr Andrea Ghiotti

  7. Fretting Corrosion Behavior of Additive Manufactured and Cryogenic-Machined Ti6Al4V for Biomedical Applications

    Article • Advanced Engineering Materials, February 2016, Wiley

    Dr Andrea Ghiotti

  8. Hot stamping of boron steel sheets with tailored properties: A review

    Article • Journal of Materials Processing Technology, February 2016, Elsevier

    Dr Andrea Ghiotti

  9. An improved damage evolution model to predict fracture of steel sheet at elevated temperature

    Article • Journal of Materials Processing Technology, February 2016, Elsevier

    Dr Andrea Ghiotti

  10. Modelling of Forming Limit Strains of AA5083 Aluminium Sheets at Room and High Temperatures

    Article • Advanced Materials Research, January 2016, Trans Tech Publications

    Dr Andrea Ghiotti

  11. The Influence of Material Properties on the Tool Crater Wear When Machining Ti6Al4V Produced by Additive Manufacturing Technologies

    Article • Procedia CIRP, January 2016, Elsevier

    Dr Andrea Ghiotti

  12. Analysis of the Surface Integrity in Cryogenic Turning of Ti6Al4V Produced by Direct Melting Laser Sintering

    Article • Procedia CIRP, January 2016, Elsevier

    Dr Andrea Ghiotti

  13. Feasibility of Cryogenic Cooling in Finishing Turning of Acetabular Cups Made of Additive Manufactured Ti6Al4V

    Article • Procedia CIRP, January 2016, Elsevier

    Dr Andrea Ghiotti

  14. Phase evolution in hot forging of dual phase titanium alloys: Experiments and numerical analysis

    Article • Journal of Manufacturing Processes, October 2015, Elsevier

    Dr Andrea Ghiotti, Prof. Livan Fratini

  15. Elevated temperature behaviour of Ti6Al4V sheets with thermo-electro-chemical modified surfaces for biomedical applications

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, August 2015, SAGE Publications

    Dr Andrea Ghiotti

  16. Ductile damage modeling at elevated temperature applied to the cross wedge rolling of AA6082-T6 bars

    Article • Journal of Materials Processing Technology, August 2015, Elsevier

    Dr Andrea Ghiotti

  17. Effects of Thermal Parameters on the Mechanical Characteristics of Ti6Al4V Sheets Deformed at Elevated Temperatures

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Dr Andrea Ghiotti

  18. Feasibility of Motion-Capture Techniques Applied to Tube Bending

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Dr Andrea Ghiotti

  19. Machinability of the EBM Ti6Al4V in Cryogenic Turning

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Dr Andrea Ghiotti

  20. Numerical Modelling of Orthogonal Cutting of Electron Beam Melted Ti6Al4V

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    PhD Student Stano Imbrogno, Dr Andrea Ghiotti

  21. Manufacturing Engineering

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Dr Andrea Ghiotti

  22. Comparison of tribological and wear performances of AlSi and Zn coatings in hot stamping of boron steel sheets

    Article • Wear, May 2015, Elsevier

    Dr Andrea Ghiotti

  23. Analysis of tool wear in cryogenic machining of additive manufactured Ti6Al4V alloy

    Article • Wear, April 2015, Elsevier

    Dr Andrea Ghiotti

  24. Tribological Behaviour of Lubricants in Hot Stamping of AA6016

    Article • Key Engineering Materials, March 2015, Trans Tech Publications

    Dr Andrea Ghiotti

  25. Formability Characteristics of Hot Stamped Ti6Al4V Sheets Electro-Chemically Modified on Surface for Biomedical Applications

    Article • Key Engineering Materials, March 2015, Trans Tech Publications

    Dr Andrea Ghiotti

  26. Formability of AA6060 Tubes in Hot Metal Gas Forming at High Temperatures

    Article • Key Engineering Materials, March 2015, Trans Tech Publications

    Dr Andrea Ghiotti

  27. Reduction of Vibrations in Blanking by MR Dampers

    Article • January 2015, Springer Science + Business Media

    Dr Andrea Ghiotti

  28. Prediction of Distortions in Hot Forged Martensitic Stainless Steel Turbine Blades by Numerical Simulation

    Article • Procedia Manufacturing, January 2015, Elsevier

    Dr Andrea Ghiotti

  29. Finite Element Simulation of Semi-finishing Turning of Electron Beam Melted Ti6Al4V Under Dry and Cryogenic Cooling

    Article • Procedia CIRP, January 2015, Elsevier

    Dr Andrea Ghiotti

  30. Enhancing the accuracy of high-speed laser triangulation measurement of freeform parts at elevated temperature

    Article • CIRP Annals, January 2015, Elsevier

    Dr Andrea Ghiotti, Alexander Schöch

  31. Tribological performances of Zn-based coating in direct hot stamping

    Article • Tribology International, October 2014, Elsevier

    Dr Andrea Ghiotti

  32. Impact of High Speed Incremental Forming on Material Properties of AA6082 Sheets

    Article • Key Engineering Materials, September 2014, Trans Tech Publications

    Dr Andrea Ghiotti

  33. Novel Wear Testing Apparatus to Investigate the Reciprocating Sliding Wear in Sheet Metal Forming at Elevated Temperatures

    Article • Key Engineering Materials, September 2014, Trans Tech Publications

    Dr Andrea Ghiotti

  34. Wear Behaviour of Al-Si and Zn Coated 22MnB5 in Hot Stamping

    Article • Advanced Materials Research, June 2014, Trans Tech Publications

    Dr Andrea Ghiotti

  35. Novel experimental set-up to investigate the wear of coatings for sheet metal forming tools

    Article • International Journal of Material Forming, May 2014, Springer Science + Business Media

    Dr Andrea Ghiotti

  36. Novel Experimental Set-Up to Test Tubes Formability at Elevated Temperatures

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Dr Andrea Ghiotti

  37. Comparison between Wrought and EBM Ti6Al4V Machinability Characteristics

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Dr Andrea Ghiotti

  38. Deformation of AA6016 Aluminum Alloy Sheets at High Temperature and Strain Rate

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Dr Andrea Ghiotti

  39. Phase Transformation and Microstructural Behavior of New Steel Grades for Hot Sheet Stamping

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Dr Andrea Ghiotti

  40. Surface and Microstructure Considerations in High Speed Single Point Incremental Forming of Ti6Al4V Sheets

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Dr Andrea Ghiotti

  41. Numerical modelling of the tailored tempering process applied to 22MnB5 sheets

    Article • Finite Elements in Analysis and Design, April 2014, Elsevier

    Dr Andrea Ghiotti

  42. Shear Surface Control in Blanking by Adaptronic Systems

    Article • Procedia Engineering, January 2014, Elsevier

    Dr Andrea Ghiotti

  43. Modelling of AA6082 Ductile Damage Evolution under Hot Rolling Conditions

    Article • Procedia Engineering, January 2014, Elsevier

    Dr Andrea Ghiotti

  44. Hot Stamping

    Article • January 2014, Elsevier

    Dr Andrea Ghiotti

  45. Machinability Characteristics of Wrought and EBM CoCrMo Alloys

    Article • Procedia CIRP, January 2014, Elsevier

    Dr Andrea Ghiotti

  46. The Effect of Cutting Speed and Feed Rate on the Surface Integrity in Dry Turning of CoCrMo Alloy

    Article • Procedia CIRP, January 2014, Elsevier

    Dr Andrea Ghiotti

  47. Effect of Solubilisation on the High-temperature Formability of AA6016 Sheets

    Article • Procedia CIRP, January 2014, Elsevier

    Dr Andrea Ghiotti

  48. Testing and modelling of material behaviour and formability in sheet metal forming

    Article • CIRP Annals, January 2014, Elsevier

    Dr Andrea Ghiotti

  49. Effect of the Process Parameters on the Machinability Characteristics of a CoCrMo Alloy

    Article • Key Engineering Materials, June 2013, Trans Tech Publications

    Dr Andrea Ghiotti

  50. Flow Characteristics of New Steel Grades Dedicated to Hot Stamping

    Article • Key Engineering Materials, June 2013, Trans Tech Publications

    Dr Andrea Ghiotti

  51. Hot Tensile Behavior of Superplastic and Commercial AA5083 Sheets at High Temperature and Strain Rate

    Article • Key Engineering Materials, June 2013, Trans Tech Publications

    Dr Andrea Ghiotti

  52. Novel Experimental Set-Up to Investigate the Wear of Coatings for Sheet Metal Forming Tools

    Article • Key Engineering Materials, June 2013, Trans Tech Publications

    Dr Andrea Ghiotti

  53. Formability Characteristics of AA5083 Sheets under Hot Forming Conditions

    Article • Key Engineering Materials, April 2013, Trans Tech Publications

    Dr Andrea Ghiotti

  54. Effects of Surface Roughness on Frictional Behaviour of Solid Organic Lubricants for Sheet Metal Forming Processes

    Article • Key Engineering Materials, April 2013, Trans Tech Publications

    Dr Andrea Ghiotti

  55. A novel approach to wear testing in hot stamping of high strength boron steel sheets

    Article • Wear, April 2013, Elsevier

    Dr Andrea Ghiotti

  56. Hot stamping of AA5083 aluminium alloy sheets

    Article • CIRP Annals, January 2013, Elsevier

    Dr Andrea Ghiotti

  57. Experimental and numerical investigations on tailored tempering process of a U-channel component with tailored mechanical properties

    Article • January 2013, American Institute of Physics

    Dr Andrea Ghiotti

  58. Advances in predicting damage evolution and fracture occurrence in metal forming operations

    Article • Journal of Manufacturing Processes, October 2012, Elsevier

    Dr Andrea Ghiotti

  59. Frictional Behaviour of Environmentally Friendly Lubricants for Sheet Metal Forming Processes

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Dr Andrea Ghiotti

  60. Tribological Behaviour of PVD Coatings for Sheet Metal Forming Tools: Laboratory and Industrial Evaluation

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Dr Andrea Ghiotti

  61. Tribological characteristics of high strength steel sheets under hot stamping conditions

    Article • Journal of Materials Processing Technology, November 2011, Elsevier

    Dr Andrea Ghiotti

  62. Tribological behaviour of DLC coatings for sheet metal forming tools

    Article • Wear, July 2011, Elsevier

    Dr Andrea Ghiotti

  63. Influence of Die Materials on the Microstructural Evolution of HSS Sheets in Hot Stamping

    Article • Key Engineering Materials, March 2011, Trans Tech Publications

    Dr Andrea Ghiotti

  64. Effect of warm forming conditions on AZ31B flow behaviour and microstructural characteristics

    Article • International Journal of Material Forming, January 2011, Springer Science + Business Media

    Dr Andrea Ghiotti

  65. Influence of Temperature on AA6014 Alloy Tribological Behaviour in Stamping Operations

    Article • January 2011, American Institute of Physics

    Dr Andrea Ghiotti

  66. Ductile fracture prediction in cold forging process chains

    Article • CIRP Annals, January 2011, Elsevier

    Dr Andrea Ghiotti

  67. Critical issues in the simulation of hot forming operations

    Article • Production Engineering, July 2010, Springer Science + Business Media

    Dr Andrea Ghiotti

  68. Interlaboratory Comparison of Friction Conditions in Hot Stamping Operations

    Article • Key Engineering Materials, May 2010, Trans Tech Publications

    Dr Andrea Ghiotti

  69. FE modelling of large ingot hot forging

    Article • International Journal of Material Forming, April 2010, Springer Science + Business Media

    Dr Andrea Ghiotti

  70. Reduction of vibrations in blanking by MR dampers

    Article • CIRP Annals, January 2010, Elsevier

    Dr Andrea Ghiotti

  71. Formability of AZ31 magnesium alloy in warm incremental forming process

    Article • International Journal of Material Forming, August 2009, Springer Science + Business Media

    Dr Andrea Ghiotti

  72. Microstructure phenomena and mechanical properties of AZ31B under warm forming conditions

    Article • International Journal of Material Forming, August 2009, Springer Science + Business Media

    Dr Andrea Ghiotti

  73. Investigation of the High Strength Steel Al-Si Coating during Hot Stamping Operations

    Article • Key Engineering Materials, January 2009, Trans Tech Publications

    Dr Andrea Ghiotti

  74. Interlaboratory Comparison of Forming Limit Curves for Hot Stamping of High Strength Steels

    Article • Key Engineering Materials, January 2009, Trans Tech Publications

    Dr Andrea Ghiotti

  75. Modelling of the Mannesmann effect

    Article • CIRP Annals, January 2009, Elsevier

    Dr Andrea Ghiotti

  76. Distortions induced in turbine blades by hot forging and cooling

    Article • International Journal of Machine Tools and Manufacture, June 2008, Elsevier

    Dr Andrea Ghiotti

  77. Preliminary Studies on Single Point Incremental Forming for Thermoplastic Materials

    Article • International Journal of Material Forming, April 2008, Springer Science + Business Media

    Dr Andrea Ghiotti

  78. Billet Cropping Numerical Modelling: an Approach Based on Inverse Analysis

    Article • International Journal of Material Forming, April 2008, Springer Science + Business Media

    Dr Andrea Ghiotti

  79. Characterisation of AZ31B magnesium alloy formability in warm forming conditions

    Article • International Journal of Material Forming, April 2008, Springer Science + Business Media

    Dr Andrea Ghiotti

  80. Microforming of Lightweight Metals in Warm Conditions

    Article • International Journal of Material Forming, March 2008, Springer Science + Business Media

    Dr Andrea Ghiotti

  81. Testing formability in the hot stamping of HSS

    Article • CIRP Annals, January 2008, Elsevier

    Dr Andrea Ghiotti

  82. Mechanical Properties and Plastic Anisotropy of the Quenchenable High Strength Steel 22MnB5 at Elevated Temperatures

    Article • July 2007, CrossRef Test Account

    Dr Andrea Ghiotti

  83. Determination of Yield Locus of Sheet Metal at Elevated Temperatures: A Novel Concept for Experimental Set-Up

    Article • July 2007, CrossRef Test Account

    Dr Andrea Ghiotti

  84. Mechanical Properties and Plastic Anisotropy of the Quenchenable High Strength Steel 22MnB5 at Elevated Temperatures

    Article • Key Engineering Materials, January 2007, Trans Tech Publications

    Dr Andrea Ghiotti

  85. Determination of Yield Locus of Sheet Metal at Elevated Temperatures: A Novel Concept for Experimental Set-Up

    Article • Key Engineering Materials, January 2007, Trans Tech Publications

    Dr Andrea Ghiotti

  86. An Approach to Modelling the Forming Process of Sheet Metal-Polymer Composites

    Article • CIRP Annals, January 2007, Elsevier

    Dr Andrea Ghiotti

  87. Investigation of 22MnB5 formability in hot stamping operations

    Article • Journal of Materials Processing Technology, July 2006, Elsevier

    Dr Andrea Ghiotti

  88. Physical Simulation of Longitudinal Welding in Porthole-Die Extrusion

    Article • CIRP Annals, January 2006, Elsevier

    Dr Andrea Ghiotti

  89. Evaluating the Press Stiffness in Realistic Operating Conditions

    Article • Springer Science + Business Media

    Dr Andrea Ghiotti