All Stories

  1. Experimental approach to measure the restraining force in deep drawing by means of a versatile draw bead simulator

    Article • Materials and Manufacturing Processes, June 2019, Taylor & Francis

    ELENA BASSOLI, andrea gatto

  2. 3D printing of biomedical alloys

    Article • Advanced Materials Research, March 2019, Trans Tech Publications

    andrea gatto, ELENA BASSOLI, PhD Gianni Barucca

  3. The Influence of Powder Particle and Grain Size on Parts Manufacturing by Powder Bed Fusion

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    andrea gatto, ELENA BASSOLI, Sorin Ion Munteanu, Researcher Dr Mihaela Cosnita

  4. Effects of build orientation and element partitioning on microstructure and mechanical properties of biomedical Ti-6Al-4V alloy produced by laser sintering

    Article • Journal of the Mechanical Behavior of Biomedical Materials, July 2017, Elsevier

    andrea gatto, PhD Gianni Barucca

  5. Dental Failure Analysis: The Need of a Comprehensive Failure Classification

    Article • Procedia CIRP, January 2017, Elsevier

    andrea gatto

  6. Effects of thermal treatments on microstructure and mechanical properties of a Co–Cr–Mo–W biomedical alloy produced by laser sintering

    Article • Journal of the Mechanical Behavior of Biomedical Materials, July 2016, Elsevier

    andrea gatto, PhD Gianni Barucca

  7. Bioartificial Endocrine Organs: At the Cutting Edge of Translational Research in Endocrinology

    Article • March 2016, Taylor & Francis

    andrea gatto

  8. Influence of electrode size and geometry in electro-discharge drilling of Inconel 718

    Article • The International Journal of Advanced Manufacturing Technology, January 2016, Springer Science + Business Media

    andrea gatto

  9. Biomedical Co-Cr-Mo Components Produced by Direct Metal Laser Sintering1

    Article • Materials Today Proceedings, January 2016, Elsevier

    andrea gatto, PhD Gianni Barucca

  10. On the behaviour of reinforcements beneath the surface in turning of metal-matrix composites (MMCs)

    Article • Journal of Composite Materials, September 2015, SAGE Publications

    andrea gatto

  11. Impact of additive manufacturing on engineering education – evidence from Italy

    Article • Rapid Prototyping Journal, August 2015, Emerald

    Paolo Minetola, andrea gatto

  12. Multi-disciplinary approach in engineering education: learning with additive manufacturing and reverse engineering

    Article • Rapid Prototyping Journal, August 2015, Emerald

    Paolo Minetola, andrea gatto

  13. Energy Harvesting Smart Floor for Indoor People Localization and Tracking

    Article • August 2015, ASME International

    andrea gatto

  14. Structural characterization of biomedical Co–Cr–Mo components produced by direct metal laser sintering

    Article • Materials Science and Engineering C, March 2015, Elsevier

    Professor Iuliano Luca, andrea gatto, PhD Gianni Barucca

  15. On the chaotic nature of electro-discharge machining

    Article • The International Journal of Advanced Manufacturing Technology, February 2015, Springer Science + Business Media

    andrea gatto

  16. Tolerance Analysis for Cast vs Machined Dental Implants

    Article • Procedia CIRP, January 2015, Elsevier

    andrea gatto

  17. Surface and Sub Surface Evaluation in Coated-Wire Electrical Discharge Machining (WEDM) of INCONEL® Alloy 718

    Article • Procedia CIRP, January 2015, Elsevier

    andrea gatto

  18. Energy Harvesting system for smart shoes

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    andrea gatto

  19. Indoor people localization and tracking using an energy harvesting smart floor

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    andrea gatto

  20. On the Effect of Electrodischarge Drilling on the Fatigue Life of Inconel 718

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    ELENA BASSOLI, andrea gatto

  21. Investigation into the failure of Inconel exhaust collector produced by laser consolidation

    Article • Engineering Failure Analysis, December 2013, Elsevier

    ELENA BASSOLI, andrea gatto

  22. Additive manufacturing as a cost-effective way to produce metal parts

    Article • September 2013, Taylor & Francis

    Paolo Minetola, andrea gatto

  23. Electro-discharge drilling on DMLS parts in Co-Cr-Mo alloy

    Article • September 2013, Taylor & Francis

    Paolo Minetola, andrea gatto

  24. A planar fractal analysis of the arterial tree of the human thyroid gland

    Article • September 2013, Taylor & Francis

    andrea gatto

  25. Bridges of debris in the EDD process: Going beyond the thermo-electrical model

    Article • Journal of Materials Processing Technology, March 2013, Elsevier

    ELENA BASSOLI, andrea gatto

  26. Studies on electrodischarge drilling of an Al2O3–TiC composite

    Article • The International Journal of Advanced Manufacturing Technology, August 2012, Springer Science + Business Media

    ELENA BASSOLI, andrea gatto

  27. Mechanical behaviour of SLSed PA composites

    Article • Rapid Prototyping Journal, March 2012, Emerald

    ELENA BASSOLI, andrea gatto

  28. A combined additive layer manufacturing / indirect replication method to prototype 3D vascular-like structures of soft tissue and endocrine organs

    Article • Virtual and Physical Prototyping, March 2012, Taylor & Francis

    andrea gatto

  29. Ex situ bioengineering of bioartificial endocrine glands: A new frontier in regenerative medicine of soft tissue organs

    Article • Annals of Anatomy - Anatomischer Anzeiger, October 2011, Elsevier

    ELENA BASSOLI, andrea gatto

  30. Thermoplastic Resin Transfer Moulding in a rapid manufactured mould

    Article • September 2011, Taylor & Francis

    Paolo Minetola, andrea gatto

  31. New approaches to prototype 3D vascular-like structures by additive layer manufacturing

    Article • September 2011, Taylor & Francis

    andrea gatto

  32. Electrodischarge drilling performance on parts produced by DMLS

    Article • The International Journal of Advanced Manufacturing Technology, June 2011, Springer Science + Business Media

    ELENA BASSOLI, andrea gatto

  33. Dimensional Tolerances and Assembly Accuracy of Dental Implants and Machined Versus Cast‐On Abutments

    Article • Clinical Implant Dentistry and Related Research, April 2011, Wiley

    ELENA BASSOLI, andrea gatto

  34. Performance Optimization in Machining of Aluminium Alloys for Moulds Production: HSM and EDM

    Article • February 2011, IntechOpen

    ELENA BASSOLI, andrea gatto

  35. Characterization of Selective Laser Sintered Implant Alloys: Ti6Al4V And Co-Cr-Mo

    Article • January 2011, Springer Science + Business Media

    andrea gatto

  36. Mechanical characterisation of PA‐Al2O3 composites obtained by selective laser sintering

    Article • Rapid Prototyping Journal, March 2010, Emerald

    Professor Iuliano Luca, andrea gatto

  37. A benchmark for accuracy evaluation of dental crowns up-to-date manufacturing

    Article • September 2009, Taylor & Francis

    Paolo Minetola, andrea gatto

  38. Artificial teeth manufacturing

    Article • September 2009, Taylor & Francis

    Paolo Minetola, andrea gatto

  39. On the effects of build orientation in powder-fed Additive Layer Manufacture of steel 316L

    Article • September 2009, Taylor & Francis

    andrea gatto

  40. Densification and coarsening of laser sintered green parts by microwave technique

    Article • September 2009, Taylor & Francis

    andrea gatto

  41. Microwave assisted sintering of green metal parts

    Article • Journal of Materials Processing Technology, August 2008, Elsevier

    andrea gatto

  42. Study of the EDM process effects on aluminium alloys

    Article • International Journal of Manufacturing Technology and Management, January 2008, Inderscience Publishers

    andrea gatto

  43. 3D printing technique applied to rapid casting

    Article • Rapid Prototyping Journal, June 2007, Emerald

    ELENA BASSOLI, andrea gatto

  44. Plasma Transferred Arc deposition of powdered high performances alloys: process parameters optimisation as a function of alloy and geometrical configuration

    Article • Surface and Coatings Technology, October 2004, Elsevier

    andrea gatto

  45. Evaluation of inserts for modular thermoplastic injection moulds produced by spin casting

    Article • Journal of Materials Processing Technology, December 2001, Elsevier

    Professor Iuliano Luca, andrea gatto

  46. Application Of Rapid Tooling For Sheet Metal Forming: Flexible Drawing Die With Punches Built By SLS Technique and By Copying Process

    Article • October 2001, SAE International

    andrea gatto

  47. Application of Rapid Tooling for Sheet Metal Forming

    Article • January 1999, Springer Science + Business Media

    andrea gatto

  48. High-speed turning experiments on metal matrix composites

    Article • Composites Part A Applied Science and Manufacturing, December 1998, Elsevier

    andrea gatto

  49. Investigation on surface features of rapid prototyping parts

    Article • January 1998, Springer Science + Business Media

    andrea gatto

  50. Advanced coated ceramic tools for machining superalloys

    Article • International Journal of Machine Tools and Manufacture, May 1997, Elsevier

    andrea gatto

  51. Cutting mechanisms and surface features of WED machined metal matrix composites

    Article • Journal of Materials Processing Technology, March 1997, Elsevier

    andrea gatto

  52. Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional Accuracy and Surface Finish

    Article • CIRP Annals, January 1995, Elsevier

    andrea gatto

  53. Chip formation analysis in high speed machining of a nickel base superalloy with silicon carbide whisker-reinforced alumina

    Article • International Journal of Machine Tools and Manufacture, November 1994, Elsevier

    andrea gatto

  54. Microwave Rapid Debinding and Sintering of MIM/CIM Parts

    Article • Wiley

    andrea gatto