All Stories

  1. On the Part Quality, Process Parameters and In-Die Pressures in Indirect Squeeze Casting

    Article • Technologies, December 2021, MDPI AG

    Professor Anders E. W. Jarfors

  2. On the Hardness and Elastic Modulus of Phases in SiC-Reinforced Al Composite: Role of La and Ce Addition

    Article • Materials, October 2021, MDPI AG

    Dr. Lucia Lattanzi, Professor Anders E. W. Jarfors

  3. The complex interaction between microstructural features and crack evolution during cyclic testing in heat-treated Al–Si–Mg–Cu cast alloys

    Article • Materials Science and Engineering A, September 2021, Elsevier

    Dr. Lucia Lattanzi, Professor Anders E. W. Jarfors

  4. On the Use of Conformal Cooling in High-Pressure Die-Casting and Semisolid Casting

    Article • Technologies, May 2021, MDPI AG

    Professor Anders E. W. Jarfors

  5. Effect of Scanning Strategy in the L-PBF Process of 18Ni300 Maraging Steel

    Article • Metals, May 2021, MDPI AG

    Professor Anders E. W. Jarfors

  6. The Influence of La and Ce on Microstructure and Mechanical Properties of an Al-Si-Cu-Mg-Fe Alloy at High Temperature

    Article • Metals, February 2021, MDPI AG

    Professor Anders E. W. Jarfors

  7. Fatigue limit and microstructure in lamellar graphite iron

    Article • Materials Science and Engineering A, January 2021, Elsevier

    Professor Anders E. W. Jarfors

  8. Build Strategy and Impact Strength of SLM Produced Maraging Steel (1.2709)

    Article • Metals, December 2020, MDPI AG

    Professor Anders E. W. Jarfors

  9. Feeding and Pore Formation in Semisolid Metal Casting

    Article • Metals, November 2020, MDPI AG

    Professor Anders E. W. Jarfors

  10. Build Strategy and Impact Strength of SLM Produced Maraging Steel (1.2709)

    Article • October 2020, MDPI AG

    Professor Anders E. W. Jarfors

  11. A Comparison Between Semisolid Casting Methods for Aluminium Alloys

    Article • Metals, October 2020, MDPI AG

    Professor Anders E. W. Jarfors

  12. Feeding and Pore Formation in Semisolid Metal Casting

    Article • October 2020, MDPI AG

    Professor Anders E. W. Jarfors

  13. Effect of Process Parameters on Distortion and Residual Stress in High-Pressure Die Cast AZ91D Components After Clean Blasting and Painting

    Article • International Journal of Metalcasting, April 2020, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  14. On the Sustainable Choice of Alloying Elements for Strength of Aluminum-Based Alloys

    Article • Sustainability, February 2020, MDPI AG

    Professor Anders E. W. Jarfors

  15. Computational Methods in Design and Manufacturing Processes

    Article • Mathematical Problems in Engineering, May 2019, Hindawi Publishing Corporation

    Professor Anders E. W. Jarfors

  16. Microstructure, Texture and Mechanical Properties of Al Alloy A380 Prepared by Directional Solidification Method

    Article • Solid State Phenomena, February 2019, Trans Tech Publications

    Professor Anders E. W. Jarfors

  17. A Study of Anodising Behaviour of Al-Si Components Produced by Rheocasting

    Article • Solid State Phenomena, January 2019, Trans Tech Publications

    Professor Anders E. W. Jarfors

  18. Variation of Properties in the Cross-Section of Semi-Solid Al-7Si-0.3Mg Castings

    Article • Solid State Phenomena, January 2019, Trans Tech Publications

    Professor Anders E. W. Jarfors

  19. Recent Advances in Commercial Application of the Rheometal Process in China and Europe

    Article • Solid State Phenomena, January 2019, Trans Tech Publications

    Professor Anders E. W. Jarfors

  20. On the Formation of Micro-Shrinkage Porosities in Ductile Iron Cast Components

    Article • Metals, July 2018, MDPI AG

    Professor Anders E. W. Jarfors

  21. Effect of Boron and Cross-Section Thickness on Microstructure and Mechanical Properties of Ductile Iron

    Article • Materials Science Forum, June 2018, Trans Tech Publications

    Professor Anders E. W. Jarfors , ehsan ghassemali

  22. Scratch Behaviour of Silicon Solid Solution Strengthened Ferritic Compacted Graphite Iron (CGI)

    Article • Materials Science Forum, June 2018, Trans Tech Publications

    Professor Anders E. W. Jarfors

  23. Three-Dimensional Microstructural Characterization of Cast Iron Alloys for Numerical Analyses

    Article • Materials Science Forum, June 2018, Trans Tech Publications

    Professor Anders E. W. Jarfors

  24. Effect of Segregation and Surface Condition on Corrosion of Rheo-HPDC Al–Si Alloys

    Article • Metals, March 2018, MDPI AG

    Professor Anders E. W. Jarfors , Maryam Eslami

  25. On the fatigue damage micromechanisms in Si-solution-strengthened spheroidal graphite cast iron

    Article • Fatigue & Fracture of Engineering Materials & Structures, October 2017, Wiley

    Professor Anders E. W. Jarfors , Surendra Sujakhu, ehsan ghassemali

  26. A particle population analysis in Ti- and Al- deoxidized Hadfield steels

    Article • International Journal of Cast Metals Research, September 2017, Taylor & Francis

    Professor Anders E. W. Jarfors

  27. On the thermal conductivity of CGI and SGI cast irons

    Article • International Journal of Cast Metals Research, September 2017, Taylor & Francis

    Professor Anders E. W. Jarfors

  28. The Influence of Deoxidation Practice on the As-Cast Grain Size of Austenitic Manganese Steels

    Article • Metals, May 2017, MDPI AG

    Professor Anders E. W. Jarfors

  29. On the specific heat and thermal diffusivity of CGI and SGI cast irons

    Article • International Journal of Cast Metals Research, February 2017, Taylor & Francis

    Professor Anders E. W. Jarfors

  30. Tool Wear and Life Span Variations in Cold Forming Operations and Their Implications in Microforming

    Article • Technologies, December 2016, MDPI AG

    Professor Anders E. W. Jarfors

  31. The Effects of Fe-Particles on the Tensile Properties of Al-Si-Cu Alloys

    Article • Metals, December 2016, MDPI AG

    Professor Anders E. W. Jarfors

  32. Effect of Mg17Al12 Fraction on Mechanical Properties of Mg-9%Al-1%Zn Cast Alloy

    Article • Metals, October 2016, MDPI AG

    Professor Anders E. W. Jarfors

  33. Filling, Feeding and Defect Formation of Thick-Walled AlSi7Mg0.3 Semi-Solid Castings

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Professor Anders E. W. Jarfors

  34. A study of formation and growth of the anodised surface layer on cast Al-Si alloys based on different analytical techniques

    Article • Materials & Design, July 2016, Elsevier

    Professor Anders E. W. Jarfors

  35. Effect of fillets on heat transfer in a rheocast aluminium heatsink

    Article • April 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Anders E. W. Jarfors

  36. Particles Precipitation in Ti- and Al-Deoxidized Hadfield Steels

    Article • steel research international, March 2016, Wiley

    Professor Anders E. W. Jarfors

  37. Microstructural strain distribution in ductile iron; comparison between finite element simulation and digital image correlation measurements

    Article • Materials Science and Engineering A, February 2016, Elsevier

    Professor Anders E. W. Jarfors

  38. Casting Alloy Design and Modification

    Article • Metals, January 2016, MDPI AG

    Professor Anders E. W. Jarfors

  39. Solidification Sequence and Evolution of Microstructure During Rheocasting of Four Al-Si-Mg-Fe Alloys with Low Si Content

    Article • Metallurgical and Materials Transactions A, December 2015, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  40. High temperature tensile deformation behavior and failure mechanisms of an Al–Si–Cu–Mg cast alloy — The microstructural scale effect

    Article • Materials & Design, December 2015, Elsevier

    Professor Anders E. W. Jarfors

  41. Influence of Si and cooling rate on microstructure and mechanical properties of Al-Si-Mg cast alloys

    Article • Surface and Interface Analysis, August 2015, Wiley

    Professor Anders E. W. Jarfors

  42. On Thermal Expansion and Density of CGI and SGI Cast Irons

    Article • Metals, June 2015, MDPI AG

    Professor Anders E. W. Jarfors

  43. Microstructure analysis of Al – Si – Cu alloys prepared by gradient solidification technique

    Article • International Journal of Modern Physics B, April 2015, World Scientific Pub Co Pte Lt

    Professor Anders E. W. Jarfors

  44. On the complexity of the relationship between microstructure and tensile properties in cast aluminum

    Article • International Journal of Modern Physics B, April 2015, World Scientific Pub Co Pte Lt

    Professor Anders E. W. Jarfors

  45. Micro-Crack Initiation in High-Silicon Cast Iron during Tension Loading

    Article • February 2015, Wiley

    Professor Anders E. W. Jarfors

  46. Mechanical and Thermal Properties of Rheocast Telecom Component using Low Silicon Aluminium Alloy in As-Cast and Heat-Treated Conditions

    Article • February 2015, Wiley

    Professor Anders E. W. Jarfors

  47. The Portevin-Le Chatelier Effect in a Rheocast Al-Si-Cu Alloy

    Article • February 2015, Wiley

    Professor Anders E. W. Jarfors

  48. Microstructural Scale Effects on Thermal Expansion Behaviour of Cast AZ91D

    Article • February 2015, Wiley

    Professor Anders E. W. Jarfors

  49. Effect of cold-work on the Hall–Petch breakdown in copper based micro-components

    Article • Mechanics of Materials, January 2015, Elsevier

    Professor Anders E. W. Jarfors

  50. Atmospheric Corrosion of Mg Alloy AZ91D Fabricated by a Semi-Solid Casting Technique: The Influence of Microstructure

    Article • Journal of The Electrochemical Society, January 2015, The Electrochemical Society

    Professor Anders E. W. Jarfors

  51. High temperature deformation behavior of Mg67Zn28Ca5 metallic glass and its composites

    Article • Materials Science and Engineering A, January 2015, Elsevier

    Professor Anders E. W. Jarfors

  52. Effect of Rheocasting on Corrosion of AM50 Mg Alloy

    Article • Journal of The Electrochemical Society, December 2014, The Electrochemical Society

    Professor Anders E. W. Jarfors

  53. Microstructure and material soundness in liquid and rheocast AZ91: effect of section thickness

    Article • International Journal of Cast Metals Research, October 2014, Maney Publishing

    Professor Anders E. W. Jarfors

  54. Metal Casting

    Article • September 2014, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  55. Influence of Process Parameters on Surface Appearance and Roughness of a Low Si Containing Al-Alloy, in Semisolid Casting

    Article • Solid State Phenomena, September 2014, Trans Tech Publications

    Professor Anders E. W. Jarfors

  56. Influence of Microstructural Inhomogeneity on Fracture Behaviour in SSM-HPDC Al-Si-Cu-Fe Component with Low Si Content

    Article • Solid State Phenomena, September 2014, Trans Tech Publications

    Professor Anders E. W. Jarfors

  57. Microstructural characterization of the Mg–Al alloy AM50 produced by a newly developed rheo-casting process

    Article • Materials Characterization, September 2014, Elsevier

    Professor Anders E. W. Jarfors

  58. High Temperature Tensile Behaviour of the A354 Aluminum Alloy

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Professor Anders E. W. Jarfors

  59. Influence of SDAS on the High Temperature Tensile Behaviour of the C355 Al Alloy

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Professor Anders E. W. Jarfors

  60. Microstructure formation of porous sintered Ti–Si–Zr compacts with mechanically alloyed-activated Ti–Si and TiH2 powders

    Article • Journal of Alloys and Compounds, May 2014, Elsevier

    Professor Anders E. W. Jarfors

  61. Experimental and Simulation of Friction Effects in an Open-Die Microforging/Extrusion Process

    Article • Journal of Micro and Nano-Manufacturing, February 2014, ASME International

    Professor Anders E. W. Jarfors

  62. Heat Treating of High Pressure Die Cast Components: Challenges and Possibilities

    Article • February 2014, Wiley

    Professor Anders E. W. Jarfors

  63. Effects of Microstructure and Defects on Tensile and Fracture Behavior of a HPDC Component: Potential Properties and Actual Outcome of EN AC-44300 Alloy

    Article • February 2014, Wiley

    Professor Anders E. W. Jarfors

  64. Effects of Microstructure on Deformation Behaviour of AZ91D Cast Alloy

    Article • January 2014, Wiley

    Professor Anders E. W. Jarfors

  65. Friction Effects During Open-die Micro-forging/Extrusion Processes: An Upper Bound Approach

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Anders E. W. Jarfors

  66. On Vertical Drag Defects Formation During Direct Chill (DC) Casting of Aluminum Billets

    Article • Metallurgical and Materials Transactions B, December 2013, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  67. Grain size and workpiece dimension effects on material flow in an open-die micro-forging/extrusion process

    Article • Materials Science and Engineering A, October 2013, Elsevier

    Professor Anders E. W. Jarfors

  68. Optimization of axisymmetric open-die micro-forging/extrusion processes: An upper bound approach

    Article • International Journal of Mechanical Sciences, June 2013, Elsevier

    Professor Anders E. W. Jarfors

  69. Deformation behavior of Mg67Zn28Ca5 metallic glass at near supercooled liquid region

    Article • Journal of Alloys and Compounds, February 2013, Elsevier

    Professor Anders E. W. Jarfors

  70. Finite element modelling of superplastic-like forming using a dislocation density-based model for AA5083

    Article • Modelling and Simulation in Materials Science and Engineering, January 2013, Institute of Physics Publishing

    Professor Anders E. W. Jarfors , Professor Lars-Erik Lindgren

  71. Metal Casting

    Article • January 2013, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  72. Influence of Casting Process Parameters on Surface Roughness in Hot-Chamber Die Casting of AZ91D

    Article • Advanced Materials Research, November 2012, Trans Tech Publications

    Professor Anders E. W. Jarfors

  73. Effect of Superheat on Melting Rate of EEM of Al Alloys during Stirring Using the RheoMetal Process

    Article • Solid State Phenomena, October 2012, Trans Tech Publications

    Professor Anders E. W. Jarfors

  74. Greener manufacturing: Superplastic-like forming

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Anders E. W. Jarfors

  75. Progressive microforming process: towards the mass production of micro-parts using sheet metal

    Article • The International Journal of Advanced Manufacturing Technology, July 2012, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  76. Corrosion performance of melt-spun Mg67Zn28Ca5 metallic glass in artificial sweat

    Article • Journal of Materials Science, June 2012, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  77. In vitro corrosion behaviors of Mg67Zn28Ca5 alloy: From amorphous to crystalline

    Article • Materials Chemistry and Physics, June 2012, Elsevier

    Professor Anders E. W. Jarfors

  78. Corrosion Behavior and Surface Analysis of Melt-Spun Mg-Based Metallic Glass in Physiological Saline Solution

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Professor Anders E. W. Jarfors

  79. A study of the cutting performance of poly-crystalline oxygen free copper with single crystalline diamond micro-tools

    Article • Precision Engineering, January 2012, Elsevier

    Professor Anders E. W. Jarfors

  80. On the microstructure of micro-pins manufactured by a novel progressive microforming process

    Article • International Journal of Material Forming, September 2011, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  81. Processing and Properties of Amorphous Magnesium-Based Eco-Materials

    Article • Materials Science Forum, July 2011, Trans Tech Publications

    Professor Anders E. W. Jarfors

  82. Synthesis, characterization and mechanical properties of nano alumina particulate reinforced magnesium based bulk metallic glass composites

    Article • Materials Science and Engineering A, July 2011, Elsevier

    Professor Anders E. W. Jarfors

  83. Finite Element Modeling of a Non-Isothermal Superplastic-Like Forming Process

    Article • January 2011, American Institute of Physics

    Professor Anders E. W. Jarfors

  84. Producing Magnesium Metallic Glass By Disintegrated Melt Deposition

    Article • January 2011, American Institute of Physics

    Professor Anders E. W. Jarfors

  85. Investigation of Process Parameters in Superplastic Forming of Mechanical Pre-Formed Sheet by FEM

    Article • Key Engineering Materials, September 2010, Trans Tech Publications

    Professor Anders E. W. Jarfors

  86. Investigation of Microstructure and Hardness in Microfoming of Pure Copper Pins

    Article • Key Engineering Materials, September 2010, Trans Tech Publications

    Professor Anders E. W. Jarfors

  87. Effects of laser ablation on cemented tungsten carbide surface quality

    Article • Applied Physics A, August 2010, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  88. Formability in AA5083 and AA6061 alloys for light weight applications

    Article • Materials & Design (1980-2015), June 2010, Elsevier

    Professor Anders E. W. Jarfors

  89. Preface

    Article • Materials & Design (1980-2015), June 2010, Elsevier

    Professor Anders E. W. Jarfors

  90. Mechanical Properties and Microstructure of Aluminum Alloy Al-6061 Obtained by the Liquid Forging Process

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Anders E. W. Jarfors

  91. Feasibility study on the Laser Aided Additive Manufacturing of die inserts for liquid forging

    Article • Materials & Design (1980-2015), June 2010, Elsevier

    Professor Anders E. W. Jarfors

  92. Effect of cold severe deformation by multi directional forging on elastic modulus of multi functional Ti+25mol% (Ta,Nb,V)+(Zr,Hr,O) alloy

    Article • Materials & Design (1980-2015), June 2010, Elsevier

    Professor Anders E. W. Jarfors

  93. Superplastic-like forming of non-superplastic AA5083 combined with mechanical pre-forming

    Article • The International Journal of Advanced Manufacturing Technology, May 2010, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  94. Magnesium and Aluminium Carbon Nanotube Composites

    Article • Key Engineering Materials, January 2010, Trans Tech Publications

    Professor Anders E. W. Jarfors

  95. Glass Formation and Structural Study of Ti50Cu50 Alloy by Molecular Dynamics

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Professor Anders E. W. Jarfors

  96. Porosity formation and gas bubble retention in laser metal deposition

    Article • Applied Physics A, May 2009, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  97. RECENT DEVELOPMENTS IN THE MANUFACTURING OF COMPONENTS FROM ALUMINIUM-, MAGNESIUM- AND TITANIUM-BASED ALLOYS

    Article • COSMOS, May 2009, World Scientific Pub Co Pte Lt

    Professor Anders E. W. Jarfors

  98. Elastic modulus of sintered porous Ti–Si–Zr, using activation by Ti–Si mechanically alloyed powder and TiH2 powder

    Article • Materials Science and Engineering A, February 2008, Elsevier

    Professor Anders E. W. Jarfors

  99. On the precipitation of TiB2 in aluminum melts from the reaction with KBF4 and K2TiF6

    Article • Materials Science and Engineering A, December 2005, Elsevier

    Professor Anders E. W. Jarfors

  100. Corrigendum to “Solid state synthesis of nanocrystalline and/or amorphous 50Ni–50Ti alloy” [Mater. Sci. Eng. A 392 (2005) 222–228]

    Article • Materials Science and Engineering A, August 2005, Elsevier

    Professor Anders E. W. Jarfors

  101. Residual Stresses in Thin-walled Hot Chamber Die Cast AZ91d; an Experimental Study

    Article • April 2005, Wiley

    Professor Anders E. W. Jarfors

  102. Characterisation of a duplex TiO2/CaP coating on Ti6Al4V for hard tissue replacement

    Article • Biomaterials, April 2005, Elsevier

    Professor Anders E. W. Jarfors

  103. Solid state synthesis of nanocrystalline and/or amorphous 50Ni–50Ti alloy

    Article • Materials Science and Engineering A, February 2005, Elsevier

    Professor Anders E. W. Jarfors

  104. Structural evolution in Ti–Si alloy synthesized by mechanical alloying

    Article • Physica B Condensed Matter, October 2004, Elsevier

    Professor Anders E. W. Jarfors

  105. Melting and coarsening of A356 during preheating for semisolid forming

    Article • International Journal of Cast Metals Research, June 2004, Maney Publishing

    Professor Anders E. W. Jarfors

  106. Mechanism of Lubrication-Induced Surface Cracking in Hot Chamber Die Cast Thin-Walled AZ91D Parts

    Article • Materials and Manufacturing Processes, January 2003, Taylor & Francis

    Professor Anders E. W. Jarfors

  107. A Discussion of the Dynamic Specific Heat during Solidification

    Article • Materials Science Forum, January 2003, Trans Tech Publications

    Professor Anders E. W. Jarfors

  108. Influence of Process Parameters on Reaction Products during Self-Propagating High-Temperature Synthesis of Porous NiTi

    Article • Materials Science Forum, January 2003, Trans Tech Publications

    Professor Anders E. W. Jarfors

  109. Self-propagating high-temperature synthesis and liquid-phase sintering of TiC/Fe composites

    Article • Journal of Materials Processing Technology, September 2002, Elsevier

    Professor Anders E. W. Jarfors

  110. Deformation enhanced liquid phase sintering (DELPS): a study on the use of partial adiabatic melting during powder consolidation

    Article • Journal of Materials Processing Technology, September 2002, Elsevier

    Professor Anders E. W. Jarfors

  111. Preface

    Article • Materials & Design (1980-2015), September 2001, Elsevier

    Professor Anders E. W. Jarfors

  112. Experimental investigation and thermodynamic assessment of the Al-rich side of the Al–B system

    Article • Materials & Design (1980-2015), September 2001, Elsevier

    Professor Anders E. W. Jarfors

  113. On the reaction between aluminium, K2TiF6 and KBF4

    Article • Journal of Alloys and Compounds, November 1999, Elsevier

    Professor Anders E. W. Jarfors

  114. Experimental analysis of the intermediary phases AlB2, AlB12 and TiB2 in the Al–B and Al–Ti–B systems

    Article • Journal of Alloys and Compounds, February 1999, Elsevier

    Professor Anders E. W. Jarfors

  115. Article • Journal of Materials Science, January 1999, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  116. In-situ Formed Aluminium Composites

    Article • January 1998, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  117. On the design of a rotary spray former: experimental and theoretical background

    Article • Journal of Materials Processing Technology, November 1997, Elsevier

    Professor Anders E. W. Jarfors

  118. Solubility of copper in titanium carbide

    Article • Materials Science and Technology, December 1996, Maney Publishing

    Professor Anders E. W. Jarfors

  119. Reactions during infiltration of

    Article • Metallurgical Transactions A, November 1993, Springer Science + Business Media

    Professor Anders E. W. Jarfors

  120. In-Situ Formation of Carbide Composites by Liquid/Solid Reactions

    Article • Key Engineering Materials, January 1993, Trans Tech Publications

    Professor Anders E. W. Jarfors

  121. On the thermodynamics and kinetics of carbides in the aluminium-rich corner of the AlTiC phase diagram

    Article • Materials Science and Engineering A, March 1991, Elsevier

    Professor Anders E. W. Jarfors

  122. Liquid phase sintering of tungsten composites under microgravity: Influence of liquid/particle surface energy

    Article • Advances in Space Research, January 1991, Elsevier

    Professor Anders E. W. Jarfors