All Stories

  1. Local Fracture of a Reinforced Concrete Beam Under High-Velocity Impact on Biaxial Bending and Torsion Deformation
  2. Вероятностный критерий оценки живучести железобетонных рам при локализации разрушения
  3. Исследование несущей способности коррозионно-повреждаемых сжатых железобетонных элементов при поперечном действии импульсной нагрузки
  4. Экономическая сущность критериев оптимальности при проектировании несущих конструкций в условиях обеспечения эффективности капитальных вложений
  5. Управление имущественным комплексом промышленных предприятий в условиях цифровой трансформации
  6. Влияние податливости узлов покрытий заглубленных сооружений на предельное значение ударной нагрузки
  7. Динамика плиты покрытия заглубленного сооружения при варьировании жесткости ее опор
  8. DYNAMICS OF REINFORCED CONCRETE SLAB OF PEDESTRIAN BRIDGE WITH RIGID REINFORCEMENT
  9. Resistance to progressive collapse of monolithic frames of buildings at localized damage of nodes from push-through
  10. Using Machine Learning Technologies to Design Modular Buildings
  11. NUMERICAL ANALYSIS OF STRESS-STRAIN STATE OF THE STEEL MODULAR BLOCK WITH CORRUGATED WEBS
  12. Load Identification in Steel Structural Systems Using Machine Learning Elements: Uniform Length Loads and Point Forces
  13. Investigation of monolithic frame with initial punching damage under accidental impacts
  14. Prediction of the load-bearing capacity of reinforced concrete beams with a rectangular cross-section using the basic principles of machine learning
  15. Risk-Based Optimization of RC-Beams Under Different Local Damage Scenarios
  16. Nonlinear Deformation Model for Analysis of Temperature Effects on Reinforced Concrete Beam Elements
  17. Ensuring the Safety of Steel Moment Frames Subjected to Uncertain Impacts
  18. LOD of a Computational Numerical Model for Evaluating the Mechanical Safety of Steel Structures
  19. Safety of Reinforced Concrete Columns: Effect of Initial Imperfections and Material Deterioration under Emergency Actions
  20. Stability of the RC Column under Horizontal Impacts
  21. Experimental research on composite deck bridges with encased steel beams
  22. Construction duration in the life cycle of buildings under uncertainty
  23. The stability analysis of the reinforced concrete column under transverse shock impacts
  24. Mechanical safety of eccentrically compressed RC-column in the event of emergency impact
  25. Strength of reinforced concrete columns under special complex influences
  26. Analytical Model for Assessment of Deflections of Corrosion-Damaged Reinforced Concrete Beams
  27. Scheduling Optimization Using an Adapted Genetic Algorithm with Due Regard for Random Project Interruptions
  28. Optimization of reinforced concrete beams under local mechanical and corrosive damage
  29. Dynamics of FRC Slabs on Elastic–Plastic Supports Under Blast Loading
  30. Dynamics of Reinforced Concrete Slab-Frame Structures with Punching Damages
  31. OPTIMIZATION OF BEARING STRUCTURES SUBJECT TO MECHANICAL SAFETY: AN EVOLUTIONARY APPROACH AND SOFTWARE
  32. Analysis of the Ultimate Loading on Concrete Beams in FEMAP NX Nastran
  33. BEARING CAPACITY OF EMERGENCYLY LOADED REINFORCED CONCRETE COLUMNS WITH INITIAL IMPERFECTIONS
  34. FIBRO REINFORCED CONCRETE PLATE DYNAMICS ON DEFORMABLE SUPPORTS WITH VARIABLE AREA OF BLAST LOAD
  35. Assessment of mechanical safety of cost-optimized reinforced concrete structures
  36. Optimization of reinforced concrete structures: importance of design detail level
  37. The efficiency of varying parameters when optimizing reinforced concrete structures
  38. DYNAMICS OF REINFORCED CONCRETE NON-BEAM FRAMES IN CASE OF DAMAGE TO SLABS PUNCHING
  39. The Dual-band Dipole-like Arrangement for Digital Printed Antenna Arrays
  40. Multi-criteria optimization of reinforced concrete beams using genetic algorithms
  41. Strategy for the evolutionary optimization of reinforced concrete frames based on parallel populations evolving
  42. Optimal Design of Wall and Ceiling Structures According to the Mechanical Safety and Comfort of the Internal Environment
  43. Review of modern optimization methods for bearing systems of buildings аnd structures
  44. OPTIMAL DESIGN OF STEEL FRAME STRUCTURES SUBJECT TO LEVEL OF MECHANICAL SAFETY
  45. Frame structures optimization based on evolutionary modeling in active overall stability constraints
  46. Metaheuristic optimization of building structures with different level of safety
  47. Optimal structures design: accounting of costs and relative accidents risk
  48. Evolutionary optimization of reinforced concrete beams, taking into account design reliability, safety and risks during the emergency loss of supports
  49. Cost minimization for safety enhancing of timber beam structures in historical buildings
  50. Optimization of steel frame building systems in terms of parameters and reliability requirements
  51. Fine grained concrete structures reliability assessment: theory and investigational studies
  52. Increasing the reliability of the soil slopes design using evolutionary modelling
  53. REVIEW OF METHODS AND RESULTS OF EXPERIMENTAL INVESTIGATIONS OF STEEL AND STEEL CONCRETE STRUCTURES UNDER SPECIAL IMPACT
  54. Mixed Approaches to Handle Limitations and Execute Mutation in the Genetic Algorithm for Truss Size, Shape and Topology Optimization
  55. METHOD FOR DETERMINING THE DURATION OF CONSTRUCTION BASING ON EVOLUTIONARY MODELING TAKING INTO ACCOUNT RANDOM ORGANIZATIONAL EXPECTATIONS
  56. Evolutionary Optimization of Frame Structures Taking into Account the Project Reliability and Possibility of Emergency Actions
  57. Optimization of flat steel frame and foundation posts system
  58. Press Mold Characterization to Ensure the Integrity of the Front Face of the Bonding Relief Plywood
  59. Shape Synthesis for Skeletal Structures Using а Genetic Algorithm and Delaunay Tetrahedron Partition
  60. Optimization of frame structures with possibility оf emergency actions
  61. Evolutionary optimization of steel trusses with the nodal joints of rods
  62. ЭКСПЕРИМЕНТАЛЬНЫЕ ИССЛЕДОВАНИЯ НЕСУЩЕЙ СПОСОБНОСТИ ПРОСТРАНСТВЕННЫХ МЕТАЛЛИЧЕСКИХ РАМ
  63. SQUID-imaging technology to study magnetic nanocarriers for targeted magnetic transport