All Stories

  1. Threading the needle between nano-milling efficiency and electrostatic stability

    Article • Particuology, October 2026, Elsevier

    Professor Ana M Segadaes

  2. Assessing the Drying Sensitivity of Alkali-Activated Binders Through Mechanical Reliability: Effect of Particle Size and Packing

    Article • Materials, November 2024, MDPI AG

    Professor Ana M Segadaes

  3. Powder grinding and nano-particle sizing: Sound, light and enlightenment

    Article • Powder Technology, May 2021, Elsevier

    Professor Ana M Segadaes

  4. Calcium aluminate cement in castable alumina: From hydrate bonding to the in situ formation of calcium hexaluminate

    Article • Ceramics International, February 2021, Elsevier

    Professor Ana M Segadaes

  5. Hydraulic Tiles Produced with Fine Aggregates and Pigments Reclaimed from Iron Ore Tailings

    Article • Journal of Sustainable Metallurgy, January 2021, Springer Science + Business Media

    Professor Ana M Segadaes

  6. Interpreting rheology and electrical conductivity: It all boils down to which particle size

    Article • Journal of Colloid and Interface Science, August 2020, Elsevier

    Professor Ana M Segadaes

  7. Processing and characterization of sinter-crystallized basalt glass-ceramics

    Article • Journal of Non-Crystalline Solids, June 2020, Elsevier

    Professor Ana M Segadaes

  8. Assessment of the use potential of iron ore tailings in the manufacture of ceramic tiles: From tailings-dams to “brown porcelain”

    Article • Construction and Building Materials, May 2019, Elsevier

    Professor Ana M Segadaes

  9. From dry pressing to plastic forming of ceramics: Assessing the workability window

    Article • Construction and Building Materials, November 2018, Elsevier

    Professor Ana M Segadaes

  10. Characterisation of Refractory Ceramic Pressed Body Containing Industrial Waste

    Article • Materials Science Forum, January 2018, Trans Tech Publications

    Professor Ana M Segadaes

  11. Assessment of the fluxing potential of igneous rocks in the traditional ceramics industry

    Article • Ceramics International, December 2017, Elsevier

    Professor Ana M Segadaes

  12. Double layer electrical conductivity as a stability criterion for concentrated colloidal suspensions

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, May 2017, Elsevier

    Professor Ana M Segadaes

  13. Editorial

    Article • Cerâmica, April 2017, FapUNIFESP (SciELO)

    Professor Ana M Segadaes

  14. Castable systems designed with powders reclaimed from dismantled steel induction furnace refractory linings

    Article • Ceramics International, April 2017, Elsevier

    Professor Ana M Segadaes

  15. Microstructure development in clays upon heat treatment: Kinetics and equilibrium

    Article • Applied Clay Science, January 2017, Elsevier

    Professor Ana M Segadaes

  16. Property Optimisation of EPDM Rubber Composites Using Mathematical and Statistical Strategies

    Article • Advances in Materials Science and Engineering, January 2017, Hindawi Publishing Corporation

    Professor Ana M Segadaes

  17. Reference material for temperature calibration of differential scanning calorimeters above 1400 °C

    Article • Journal of Thermal Analysis and Calorimetry, December 2016, Springer Science + Business Media

    Professor Ana M Segadaes

  18. Low-valued raw materials challenge the common eligibility criteria for triaxial ceramics

    Article • Ceramics International, July 2016, Elsevier

    Professor Ana M Segadaes

  19. Granite waste and coffee husk ash synergistic effect on clay-based ceramics

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, January 2016, Taylor & Francis

    Professor Ana M Segadaes

  20. Using mixture design of experiments to assess the environmental impact of clay-based structural ceramics containing foundry wastes

    Article • Journal of Hazardous Materials, December 2015, Elsevier

    Professor Ana M Segadaes

  21. Influence of fired clay brick waste additions on the durability of mortars

    Article • Cement and Concrete Composites, September 2015, Elsevier

    Professor Ana M Segadaes

  22. Bactericidal Potential of Titania and Silver Nano Powders Deposited in Porous Ceramic Substrates for Low-power Water Purification Reactors

    Article • Materials Today Proceedings, January 2015, Elsevier

    Professor Ana M Segadaes

  23. Combining mixture design of experiments with phase diagrams in the evaluation of structural ceramics containing foundry by-products

    Article • Applied Clay Science, November 2014, Elsevier

    Professor Ana M Segadaes

  24. Incorporation of Fired Ceramic Waste into Binary and Ternary Earth-Binder (S) Mixtures for Compressed Blocks

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Professor Ana M Segadaes

  25. Mullite formation from bentonites containing kaolinite: Effect of composition and synthesis parameters

    Article • Applied Clay Science, January 2014, Elsevier

    Professor Ana M Segadaes

  26. Increased added value reuse of construction waste in clay based building ceramics

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, November 2013, SAGE Publications

    Professor Ana M Segadaes

  27. Untreated coffee husk ashes used as flux in ceramic tiles

    Article • Applied Clay Science, May 2013, Elsevier

    Professor Ana M Segadaes

  28. Combining mineral and clay-based wastes to produce porcelain-like ceramics: An exploratory study

    Article • Applied Clay Science, November 2012, Elsevier

    Professor Ana M Segadaes

  29. Influence of Carbon Black, Calcium Carbonate and Dioctyl Phthalate Compositions on the NBR Vulcanized Rubber Properties Through Experiments Design

    Article • Macromolecular Symposia, September 2012, Wiley

    Professor Ana M Segadaes

  30. MgAl2O4 spinel synthesis by combustion and detonation reactions: A thermochemical evaluation

    Article • Journal of the European Ceramic Society, September 2012, Elsevier

    Professor Ana M Segadaes

  31. Effect of particle size distribution and calcium aluminate cement on the rheological behaviour of all-alumina refractory castables

    Article • Powder Technology, August 2012, Elsevier

    Professor Ana M Segadaes

  32. Thermomechanical evaluation of self-flowing refractory castables with and without the addition of aluminate cement

    Article • Ceramics International, May 2012, Elsevier

    Professor Ana M Segadaes

  33. Assessment of reuse potential of high alumina industrial waste as devitrification aid in common alumina–lime–silica glasses

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, October 2011, Taylor & Francis

    Professor Ana M Segadaes

  34. Designing particle sizing and packing for flowability and sintered mechanical strength

    Article • Journal of the European Ceramic Society, October 2010, Elsevier

    Professor Ana M Segadaes

  35. Factorial design used to model the compressive strength of mortars containing recycled rubber

    Article • Composite Structures, August 2010, Elsevier

    Professor Ana M Segadaes

  36. Mechanical properties of a lithium glass–ceramic matrix (LZSA) reinforced with TiC or (W,Ti)C particles: A preliminary study

    Article • Composite Structures, February 2010, Elsevier

    Professor Ana M Segadaes

  37. Influence of Surface Area on the Flowability Behaviour of Self-Flow Refractory Castables

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Professor Ana M Segadaes

  38. Assessment of the recycling potential of fresh concrete waste using a factorial design of experiments

    Article • Waste Management, November 2009, Elsevier

    Professor Ana M Segadaes

  39. Effect of quartz sand replacement by agate rejects in triaxial porcelain

    Article • Journal of Hazardous Materials, April 2009, Elsevier

    Professor Ana M Segadaes

  40. Properties of sintered alumina reinforced with niobium carbide

    Article • International Journal of Refractory Metals and Hard Materials, March 2009, Elsevier

    Professor Ana M Segadaes

  41. Effect of the incorporation of a spent catalyst reject from the petroleum industry in clay products

    Article • Applied Clay Science, January 2009, Elsevier

    Professor Ana M Segadaes

  42. The Hydration of Magnesium Phosphate Cements: Effect of Powder Characteristics on the Reaction Kinetics

    Article • Materials Science Forum, August 2008, Trans Tech Publications

    Professor Ana M Segadaes

  43. MPT Influence on the Rheological Behaviour of Self-Flow Refractory Castables

    Article • Materials Science Forum, June 2008, Trans Tech Publications

    Professor Ana M Segadaes

  44. Second-Generation Aluminium Extraction Residue Used as Devitrification Aid for Glass-Ceramics

    Article • Materials Science Forum, June 2008, Trans Tech Publications

    Professor Ana M Segadaes

  45. 27Al and29Si NMR and XRD characterisation of clinkers: standard phases and new waste based formulations

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, February 2008, Taylor & Francis

    Professor Ana M Segadaes

  46. Predicting porosity content in triaxial porcelain bodies as a function of raw materials contents

    Article • Journal of Materials Science, October 2007, Springer Science + Business Media

    Professor Ana M Segadaes

  47. Effects of potable water filtration sludge on the rheological behaviour of one-coat plastering mortars

    Article • Journal of Materials Processing Technology, July 2007, Elsevier

    Professor Ana M Segadaes

  48. Potable water filtration sludge: Use as set retarder in one-coat plastering mortars

    Article • Construction and Building Materials, March 2007, Elsevier

    Professor Ana M Segadaes

  49. Extrusion and property characterisation of waste-based ceramic formulations

    Article • Journal of the European Ceramic Society, January 2007, Elsevier

    Professor Ana M Segadaes, Manuel Ribeiro

  50. Design of the Particle Size Composition of an Alumina Powder Matrix for Maximum Flowability and Minimum Water Content

    Article • November 2006, CrossRef Test Account

    Professor Ana M Segadaes

  51. Properties of Triaxial Porcelain Bodies: Interpretation of Statistical Modeling

    Article • Journal of the American Ceramic Society, November 2006, Wiley

    Professor Ana M Segadaes

  52. Using ornamental stone cutting rejects as raw materials for red clay ceramic products: Properties and microstructure development

    Article • Materials Science and Engineering A, November 2006, Elsevier

    Professor Ana M Segadaes

  53. Design of the Particle Size Composition of an Alumina Powder Matrix for Maximum Flowability and Minimum Water Content

    Article • Materials Science Forum, November 2006, Trans Tech Publications

    Professor Ana M Segadaes

  54. Corrosion Behaviour of Vitrified Heavy Metals from Industrial Waste

    Article • Advances in Science and Technology, October 2006, Trans Tech Publications

    Professor Ana M Segadaes

  55. Improving the Properties of Low Temperature Sintered Alumina Bodies with Granite Reject Additions

    Article • Advances in Science and Technology, October 2006, Trans Tech Publications

    Professor Ana M Segadaes

  56. Particle Distribution Design in a Self-Flow Alumina Refractory Castable without Cement

    Article • Advances in Science and Technology, October 2006, Trans Tech Publications

    Professor Ana M Segadaes

  57. Properties of Wastes-Based Extruded Ceramics Formulations

    Article • Advances in Science and Technology, October 2006, Trans Tech Publications

    Professor Ana M Segadaes, Manuel Ribeiro

  58. Statistical Modelling of the Particle Size Composition of an Alumina Matrix for No-Cement Self-Flowing Refractory Castables

    Article • Materials Science Forum, May 2006, Trans Tech Publications

    Professor Ana M Segadaes

  59. Use of phase diagrams to guide ceramic production from wastes

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, February 2006, Taylor & Francis

    Professor Ana M Segadaes

  60. Ceramic formulations prepared with industrial wastes and natural sub-products

    Article • Ceramics International, January 2006, Elsevier

    Professor Ana M Segadaes

  61. Clays from Southern Brazil: Physical, Chemical and Mineralogical Characterization

    Article • November 2005, CrossRef Test Account

    Professor Ana M Segadaes

  62. Clays from Southern Brazil: Physical, Chemical and Mineralogical Characterization

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Ana M Segadaes

  63. Sintering of a Clay Material with Granite and Marble Reject

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Ana M Segadaes

  64. Using Experiments Design to Model Linear Firing Shrinkage of Triaxial Ceramic Bodies

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Ana M Segadaes

  65. Effect of tungsten carbide additions on the microstructure and properties of hot-pressed alumina

    Article • Materials Science and Engineering A, October 2005, Elsevier

    Professor Ana M Segadaes

  66. Using granite rejects to aid densification and improve mechanical properties of alumina bodies

    Article • Journal of Materials Science, August 2005, Springer Science + Business Media

    Professor Ana M Segadaes

  67. Using marble and granite rejects to enhance the processing of clay products

    Article • Applied Clay Science, August 2005, Elsevier

    Professor Ana M Segadaes

  68. Electrical conductivity and stability of concentrated aqueous alumina suspensions

    Article • Journal of Colloid and Interface Science, June 2005, Elsevier

    Professor Ana M Segadaes

  69. TEM study of a hot-pressed Al2O3-NbC composite material

    Article • Materials Research, March 2005, FapUNIFESP (SciELO)

    Professor Ana M Segadaes

  70. Using statistical techniques to model the flexural strength of dried triaxial ceramic bodies

    Article • Journal of the European Ceramic Society, August 2004, Elsevier

    Professor Ana M Segadaes

  71. Moisture Expansion: Activation Energy versus Firing Temperature

    Article • Key Engineering Materials, May 2004, Trans Tech Publications

    Professor Ana M Segadaes

  72. Refractory Formulations Made of Different Wastes and Natural Sub-Products

    Article • Key Engineering Materials, May 2004, Trans Tech Publications

    Professor Ana M Segadaes

  73. Catalyst preparation by combustion synthesis for electrochemical hydrocarbon devices

    Article • Journal of Solid State Electrochemistry, March 2004, Springer Science + Business Media

    Professor Ana M Segadaes

  74. Simultaneous optimization of linear firing shrinkage and water absorption of triaxial ceramic bodies using experiments design

    Article • Ceramics International, January 2004, Elsevier

    Professor Ana M Segadaes

  75. Using phase diagrams to deal with moisture expansion

    Article • Ceramics International, January 2003, Elsevier

    Professor Ana M Segadaes

  76. Thermal Behaviour of Aluminium Titanate Combustion Powders with MgO Additions

    Article • Key Engineering Materials, October 2002, Trans Tech Publications

    Professor Ana M Segadaes

  77. An easy way to Pb(Mg1/3Nb2/3)O3 synthesis

    Article • Materials Research Bulletin, May 2002, Elsevier

    Professor Ana M Segadaes

  78. Palladium/alumina catalysts: effect of the processing route on catalytic performance

    Article • Applied Catalysis A General, August 2001, Elsevier

    Professor Ana M Segadaes

  79. Combustion synthesized ZnO powders for varistor ceramics

    Article • International Journal of Inorganic Materials, September 1999, Elsevier

    Professor Ana M Segadaes

  80. Evaluation of Pd/alumina catalysts, produced by combustion synthesis, in the ethanol oxidation reaction to acetic acid

    Article • Applied Catalysis A General, April 1999, Elsevier

    Professor Ana M Segadaes

  81. Non‐stoichiometric La(1 − x)NiO(3 − δ) perovskites produced by combustion synthesis

    Article • Journal of Materials Chemistry, January 1999, Royal Society of Chemistry

    Professor Ana M Segadaes

  82. Combustion synthesis of aluminium titanate

    Article • Journal of the European Ceramic Society, January 1998, Elsevier

    Professor Ana M Segadaes

  83. Combustion synthesis of iron-substituted strontium titanate perovskites

    Article • Materials Research Bulletin, October 1997, Elsevier

    Professor Ana M Segadaes

  84. Combustion Synthesis of Aluminium Titanate: Thermal Stability

    Article • Key Engineering Materials, April 1997, Trans Tech Publications

    Professor Ana M Segadaes

  85. Ni/Alumina Catalysts Produced by Combustion Synthesis

    Article • Key Engineering Materials, April 1997, Trans Tech Publications

    Professor Ana M Segadaes

  86. The influence of solid type and content on the rheological behaviour of coagulated slurries and their bearing on the consolidation by pressure filtration

    Article • Journal of the European Ceramic Society, January 1997, Elsevier

    Professor Ana M Segadaes

  87. Combustion synthesis of calcium aluminates

    Article • Materials Research Bulletin, October 1996, Elsevier

    Professor Ana M Segadaes

  88. Phase equilibrium relationships in the system Al2O3-TiO2-MnO, relevant to the low-temperature sintering of alumina

    Article • Journal of the European Ceramic Society, January 1996, Elsevier

    Professor Ana M Segadaes

  89. Revised phase equilibrium relationships in the system Al2O3ZrO2SiO2

    Article • Journal of the European Ceramic Society, January 1992, Elsevier

    Professor Ana M Segadaes

  90. Phase Equilibrium Relationships in the System Al2O3-ZrO2-SiO2: An Update

    Article • Key Engineering Materials, January 1991, Trans Tech Publications

    Professor Ana M Segadaes

  91. Unshaped Refractories with Chemical Bonding

    Article • Materials Science Forum, January 1991, Trans Tech Publications

    Professor Ana M Segadaes

  92. Processing and Characterization of Thin Films of the Two-Layer Superconducting Phase in the BiSrCaCuO System: Evidence for Solid Solution

    Article • Journal of the American Ceramic Society, January 1991, Wiley

    Professor Ana M Segadaes

  93. COMPATIBILITY RELATIONSHIPS IN THE SYSTEM CaO.SiO2-Fe2O3-FeO

    Article • Le Journal de Physique Colloques, February 1986, EDP Sciences

    Professor Ana M Segadaes

  94. A Non-Linear Programming Approach for Formulation of Three-Component Ceramics as a Function of Physical and Mechanical Properties

    Article • Wiley

    Professor Ana M Segadaes