All Stories

  1. Studies on nano-metal dispersed Cu-Cr matrix composite

    Article • Materials Letters, December 2019, Elsevier

    Dr Amitava Basu Mallick

  2. Computer vision approach for phase identification from steel microstructure

    Article • Engineering Computations, July 2019, Emerald

    Dr Amitava Basu Mallick

  3. High-temperature magnetocaloric effect in devitrified Fe/Co based glassy monolayer and bilayer ribbons

    Article • Journal of Materials Science, May 2019, Springer Science + Business Media

    Dr Amitava Basu Mallick

  4. Influence of rapid solidification on mangnetostructural and magnetocaloric effect in Ni53Mn24Ga23 alloy

    Article • Materials Today Communications, December 2018, Elsevier

    Dr Amitava Basu Mallick

  5. Delineating the role of surface characteristics on the solar selectivity of colored chromium oxide coating on 304 stainless steel substrate

    Article • Solar Energy Materials and Solar Cells, August 2018, Elsevier

    Dr Arjun Dey, Dr Amitava Basu Mallick

  6. Effect of annealing treatments on the magnetic properties of FeCo/Cu core shell nanostructures

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr Amitava Basu Mallick

  7. Preface

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr Amitava Basu Mallick

  8. Understanding the evolution of microstructural features in the in-situ intermetallic phase reinforced Al/Al 3 Ti nanocomposite

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr Amitava Basu Mallick

  9. Enhancement in magnetocaloric properties of NiMnGa alloy through stoichiometric tuned phase transformation and magneto-thermal transitions

    Article • Journal of Magnetism and Magnetic Materials, October 2017, Elsevier

    Dr Amitava Basu Mallick

  10. Comprehensive studies on microstructural, electronic, thermo-optical, mechanical and tribological behavious of vacuum heat treated ultra thin CP Ti foils

    Article • Materials Research Express, July 2017, Institute of Physics Publishing

    Dr Arjun Dey, Dr Amitava Basu Mallick

  11. Microstructure and magnetic behavior of Cu–Co–Si ternary alloy synthesized by mechanical alloying and isothermal annealing

    Article • Journal of Magnetism and Magnetic Materials, March 2017, Elsevier

    Dr Amitava Basu Mallick

  12. Magnetic materials at nano scale

    Article • Key Engineering Materials, November 2016, Trans Tech Publications

    Mr Angshuman Sarkar, Amitava Basu Mallick, Dr Amitava Basu Mallick

  13. Microstructural, thermo-optical, mechanical and tribological behaviours of vacuum heat treated ultra thin SS304 foils

    Article • Materials Research Express, September 2016, Institute of Physics Publishing

    Dr Arjun Dey, Dr Amitava Basu Mallick

  14. Multi functional Si_Fe Nanocomposite

    Article • Nano Hybrids, November 2015, Trans Tech Publications

    Dr Amitava Basu Mallick

  15. Residual stress and nanotribological properties in Metal Matrix composite

    Article • Journal of Composite Materials, October 2015, SAGE Publications

    Dr Amitava Basu Mallick, Amitava Basu Mallick

  16. Solubility and magnetic properties enhancement in bi-phase nanostructure Cu–Fe–Mn alloy

    Article • Journal of Magnetism and Magnetic Materials, September 2013, Elsevier

    Dr Amitava Basu Mallick

  17. Microstructure and mechanical properties of Al/Fe-aluminide in-situ composite prepared by reactive stir casting route

    Article • Materials Science and Engineering A, August 2013, Elsevier

    Dr Amitava Basu Mallick

  18. Challenges in Manufacturing Aluminium Based Metal Matrix Nanocomposites via Stir Casting Route

    Article • Materials Science Forum, December 2012, Trans Tech Publications

    Dr Amitava Basu Mallick

  19. Influence of ternary addition of transition elements (Cr, Si and Mn) on the microstructure and magnetic properties of nano-structured CuCo alloy

    Article • Journal of Magnetism and Magnetic Materials, September 2012, Elsevier

    Dr Amitava Basu Mallick

  20. Enhancement in field emission characteristics of multifunctional ZnO/C hybrid nanostructures

    Article • Materials Chemistry and Physics, August 2012, Elsevier

    Dr Amitava Basu Mallick

  21. Structural and Giant Magneto-impedance properties of Cr-incorporated Co–Fe–Si–B amorphous microwires

    Article • Journal of Magnetism and Magnetic Materials, April 2012, Elsevier

    Dr Amitava Basu Mallick

  22. Tailoring the Magnetic and Optical Characteristics of Nanocrystalline BiFeO3 by Ce Doping

    Article • Journal of the American Ceramic Society, March 2012, Wiley

    Dr Amitava Basu Mallick

  23. ARSENIC REMEDIATION USING SURFACE FUNCTIONALIZED ULTRAFINE NANOPARTICLES

    Article • International Journal of Nanoscience, August 2011, World Scientific Pub Co Pte Lt

    Dr Amitava Basu Mallick

  24. Exchange bias and suppression of superparamagnetism of α-Fe nanoparticles in NiO matrix

    Article • Materials Science and Engineering B, August 2011, Elsevier

    Dr Amitava Basu Mallick

  25. Removal of As(III) from Aqueous Solution Using Functionalized Ultrafine Iron Oxide Nanoparticles

    Article • Separation Science and Technology, March 2011, Taylor & Francis

    Dr Amitava Basu Mallick

  26. Low temperature magnetization behavior in Co36Fe36Si3Al1Nb4B20 (at%) nanostructured alloy

    Article • Journal of Magnetism and Magnetic Materials, December 2010, Elsevier

    Dr Amitava Basu Mallick

  27. Effect of Mn on the Microstructure and Magnetic Properties in Cu-Fe-Co Alloys

    Article • Metallurgical and Materials Transactions A, November 2010, Springer Science + Business Media

    Dr Amitava Basu Mallick

  28. The Effect of Pitting on Fatigue Lives of Peak-Aged and Overaged 7075 Aluminum Alloys

    Article • Metallurgical and Materials Transactions A, August 2010, Springer Science + Business Media

    Dr Amitava Basu Mallick

  29. Optical and field emission characteristics of anodic aluminium oxide/ZnO hybrid nanostructure

    Article • Materials Chemistry and Physics, July 2010, Elsevier

    Dr Nillohit Mukherjee, Dr Amitava Basu Mallick

  30. Sr induced modification of structural, optical and magnetic properties in Bi1−xSrxFeO3 (x = 0, 0.01, 0.03, 0.05 and 0.07) multiferroic nanoparticles

    Article • Solid State Sciences, July 2010, Elsevier

    Dr Amitava Basu Mallick

  31. Pitting Enhanced Fatigue in 7075 Aluminium Alloy

    Article • Advanced Materials Research, June 2010, Trans Tech Publications

    Dr Amitava Basu Mallick

  32. Correlation of microstructure and magnetic properties in Cu–Co–Ni alloys

    Article • Materials Science and Engineering B, January 2010, Elsevier

    Dr Amitava Basu Mallick

  33. Enhancement in soft magnetic and ferromagnetic ordering behaviour through nanocrystallisation in Al substituted CoFeSiBNb alloys

    Article • Journal of Magnetism and Magnetic Materials, January 2010, Elsevier

    Dr Amitava Basu Mallick

  34. Phase evolution and magnetic behaviour of Cu–Ni–Co–Fe quaternary alloys synthesized by ball milling

    Article • Materials Chemistry and Physics, August 2009, Elsevier

    Dr Amitava Basu Mallick

  35. PHOTOLUMINESCENCE OF NON-CRYSTALLINE ALUMINA NANOWIRES SYNTHESIZED BY DIRECT ANODIZATION OF ALUMINUM

    Article • Modern Physics Letters B, June 2009, World Scientific Pub Co Pte Lt

    Dr Amitava Basu Mallick

  36. Effect of alkaline earth metal doping on thermal, optical, magnetic and dielectric properties of BiFeO3nanoparticles

    Article • Journal of Physics D Applied Physics, March 2009, Institute of Physics Publishing

    Dr Amitava Basu Mallick

  37. The microscopic origin of self-organized nanostripe pattern formation on an electropolished aluminium surface

    Article • Nanotechnology, February 2009, Institute of Physics Publishing

    Dr Amitava Basu Mallick

  38. Ab-initio pseudopotential study of electronic structure and chemisorption of oxygen on aluminium surface

    Article • Journal of Physics and Chemistry of Solids, February 2009, Elsevier

    Dr Amitava Basu Mallick

  39. Low temperature route to the multiferroic FeAlO3: XRD and Mössbauer characterizations

    Article • Hyperfine Interactions, October 2008, Springer Science + Business Media

    Dr Amitava Basu Mallick

  40. Magnetic properties of binary Cu50–(Ni, Fe and Co)50 alloys prepared by ball milling and isothermal annealing

    Article • Materials Chemistry and Physics, August 2008, Elsevier

    Dr Amitava Basu Mallick

  41. Magnetic behavior of nanocrystalline Cu–Ni–Co alloys prepared by mechanical alloying and isothermal annealing

    Article • Journal of Alloys and Compounds, June 2008, Elsevier

    Dr Amitava Basu Mallick

  42. New Generation Metal Matrix Composites

    Article • Materials and Manufacturing Processes, June 2007, Taylor & Francis

    Dr Amitava Basu Mallick

  43. Effect of Hot Rolling on the Properties of In Situ Ti-Aluminide and Alumina-Reinforced Aluminum Matrix Composite

    Article • Materials and Manufacturing Processes, June 2007, Taylor & Francis

    Dr Amitava Basu Mallick

  44. Processing of In Situ Aluminium Matrix Composites by Micropyretic Reactive Sintering

    Article • Materials and Manufacturing Processes, June 2007, Taylor & Francis

    Dr Amitava Basu Mallick

  45. Controlled synthesis of monodispersed superparamagnetic nickel ferrite nanoparticles

    Article • Solid State Communications, June 2007, Elsevier

    Dr Amitava Basu Mallick

  46. Nanowires: properties, applications and synthesis via porous anodic aluminium oxide template

    Article • Bulletin of Materials Science, June 2007, Springer Science + Business Media

    Dr Amitava Basu Mallick

  47. Preparation of Ti-aluminide reinforced in situ aluminium matrix composites by reactive hot pressing

    Article • Journal of Alloys and Compounds, June 2007, Elsevier

    Dr Amitava Basu Mallick

  48. Effect of isothermal treatments on the magnetic behavior of nanocrystalline Cu–Ni–Fe alloy prepared by mechanical alloying

    Article • Journal of Magnetism and Magnetic Materials, February 2007, Elsevier

    Dr Amitava Basu Mallick

  49. On the Synthesis of In Situ Ni–SiO2 Nanocomposites by Isothermal and Non Isothermal Reduction Technique

    Article • Materials and Manufacturing Processes, October 2006, Taylor & Francis

    Dr Amitava Basu Mallick

  50. Structure and Properties of Iron Oxide Nanoparticles Prepared Through a Gentle Chemistry Route

    Article • Materials and Manufacturing Processes, October 2006, Taylor & Francis

    Dr Amitava Basu Mallick

  51. Understanding the unlubricated friction and wear behavior of Fe-aluminide reinforced Al-based in-situ metal–matrix composite

    Article • Composites Part A Applied Science and Manufacturing, September 2006, Elsevier

    Dr Amitava Basu Mallick

  52. Anomalous agglomeration characteristics observed in iron oxide nanoclusters

    Article • Philosophical Magazine Letters, August 2006, Taylor & Francis

    Dr Amitava Basu Mallick

  53. On the Preparation of γ‐Fe2O3 Nanoparticles Via a Low‐Temperature Nonaqueous Precipitation Route

    Article • Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry, March 2006, Taylor & Francis

    Dr Amitava Basu Mallick

  54. Corrigendum to “Tribological properties of Ti-aluminide reinforced Al-based in-situ metal matrix composite” [Intermetallics 13 (2005) 733–740]

    Article • Intermetallics, January 2006, Elsevier

    Dr Amitava Basu Mallick

  55. Preparation of Fe-aluminide reinforced in situ metal matrix composites by reactive hot pressing

    Article • Materials Science and Engineering A, January 2006, Elsevier

    Dr Amitava Basu Mallick

  56. Tribological properties of Ti-aluminide reinforced Al-based in situ metal matrix composite

    Article • Intermetallics, July 2005, Elsevier

    Dr Amitava Basu Mallick

  57. Alteration in hydrogen absorption by and hydrogen permeation through a high-strength low-alloy steel due to plasma source ion implantation of nitrogen

    Article • Metallurgical and Materials Transactions B, December 2004, Springer Science + Business Media

    Dr Amitava Basu Mallick

  58. Kinetics of ?-Fe2O3 nanoparticle evolution from an organic precursor

    Article • Journal of Nanoparticle Research, October 2004, Springer Science + Business Media

    Dr Amitava Basu Mallick

  59. Design of experiments for synthesizingin situNi–SiO2and Co–SiO2nanocomposites by non-isothermal reduction treatment

    Article • Nanotechnology, July 2003, Institute of Physics Publishing

    Dr Amitava Basu Mallick

  60. Article • Journal of Nanoparticle Research, January 2002, Springer Science + Business Media

    Dr Amitava Basu Mallick

  61. Preparation of γ–Fe2O3 nanoparticles from a nonaqueous precursor

    Article • Journal of Materials Research, December 2001, Springer Science + Business Media

    Dr Amitava Basu Mallick

  62. Characteristics of α-Fe2O3 nanoparticles prepared by thermolysis of a nonaqueous precursor

    Article • Applied Surface Science, October 2001, Elsevier

    Dr Amitava Basu Mallick

  63. Preparation of α-Fe2O3 nanoparticles from a nonaqueous precursor medium

    Article • Scripta Materialia, August 2001, Elsevier

    Dr Amitava Basu Mallick

  64. Microstructural investigations of ferrite nanoparticles prepared by nonaqueous precipitation route

    Article • Materials Research Bulletin, June 2000, Elsevier

    Dr Amitava Basu Mallick

  65. Influence of reduction mechanism on the morphology of cobalt nanoparticles in a silica-gel matrix

    Article • Journal of Materials Research, January 2000, Springer Science + Business Media

    Dr Amitava Basu Mallick

  66. A Statistical Model of the Extraction-Process Parameters of Uranium–N-Phenylbenzohydroxylamine–Trioctylphosphine Oxide Complex in Chloroform Solution

    Article • Bulletin of the Chemical Society of Japan, March 1999, Oxford University Press (OUP)

    Dr Amitava Basu Mallick

  67. Isothermal in situ reduction kinetics of CoCl2–SiO2 gels to Co–SiO2 nanocomposites

    Article • Thermochimica Acta, January 1999, Elsevier

    Dr Amitava Basu Mallick

  68. Preparation of Co and Fe nanocomposites in SiO2 matrices

    Article • Materials Letters, April 1997, Elsevier

    Dr Amitava Basu Mallick

  69. In situ reduction kinetics of NiCl2 in SiO2 gel matrix

    Article • Journal of Materials Research, November 1995, Springer Science + Business Media

    Dr Amitava Basu Mallick

  70. Preparation of silica monolith via sol-gel route

    Article • Bulletin of Materials Science, September 1995, Springer Science + Business Media

    Dr Amitava Basu Mallick

  71. Influence of CaO and Na2CO3 as Additive on the Reduction of Hematite-Lignite Mixed Pellets.

    Article • ISIJ International, January 1995, Iron and Steel Institute of Japan

    Dr Amitava Basu Mallick

  72. Isothermalin situ reduction kinetic analysis of NiCl2-containing gel

    Article • Bulletin of Materials Science, August 1993, Springer Science + Business Media

    Dr Amitava Basu Mallick

  73. Kinetics and Reduction Characteristics of Hematite-noncoking Coal Mixed Pellets under Nitrogen Gas Atmosphere.

    Article • ISIJ International, January 1993, Iron and Steel Institute of Japan

    Dr Amitava Basu Mallick

  74. Preparation of glass-nickel microcomposites byin situ reduction via sol-gel route

    Article • Bulletin of Materials Science, September 1990, Springer Science + Business Media

    Dr Amitava Basu Mallick